Synthesis of poly(methyl methacrylate-co-styrene)-block-polysulfide-block-poly(methyl methacrylate-co-styrene) copolymers by free radical polymerization combined with oxidative coupling

Poly(methyl methacrylate-co-styrene)-block-polysulfide-block-poly(methyl methacrylate-co-styrene) triblock copolymers were synthesized for the first time by the free radical copolymerization of methyl methacrylate (MMA) and styrene (St) in the presence of a thiocol oligomer as a chain transfer agent, followed by chemical oxidation of the remaining SH-end groups. The apparent chain transfer constant of the thiocol SH groups in the copolymerization reaction was estimated from the rate of consumption of the thiol groups versus the overall rate of consumption of the monomers (C_T = 1.28). Based on this value, the chain transfer constant of the thiocol SH groups in St polymerization was calculated . The triblock copolymers synthesized were characterized by SEC and ¹H NMR measurements.     

Gold-copolymer nanoparticles: Poly(ε-caprolactone)/poly(N-vinyl-2-pyrrolydone) Biodegradable triblock copolymer as stabilizer and reductant

Block copolymers have been extensively used in the synthesis of many types of nanoparticles, where generally are considered as stabilizer and protective agent. In this work a double function of the biodegradable triblock copolymer poly(N-vinyl-2-pyrrolidone)-b-poly(ε-caprolactone)-b-poly(N-vinyl-2-pyrrolidone), (PVP–PCL–PVP) in the gold nanoparticle-copolymer synthesis is reported.Gold-copolymer composed nanoparticles were synthesized using the triblock copolymer (PVP–PCL–PVP) and potassium tetrachloro aurate (III), both in aqueous solution. The copolymer work as both, reductant and stabilizer agent. The obtained nanoparticles were characterized by FT-IR, dynamic light scattering (DLS), atomic force microscopy (AFM) and transmission electron microscopy (TEM). The shape and the size of the obtained nanoparticles are dependent on the copolymer/salt of gold concentration ratio used in the synthesis.To complement the experimental results about the copolymer role in the nanoparticles synthesis, computational tools were used to characterize the reactivity of the reactant species.     

Production of nanoparticles of methyl methacrylate and butyl methacrylate copolymers by microemulsion polymerization in the presence of maleic acid terminated poly(N-acetylethylenimine) macromonomers as cosurfactant

In this study, MMA/BMA copolymer nanoparticles were synthesized in oil-in-water microemulsions that were stabilized by sodium dodecyl sulphate (SDS) and initiated by potassium persulphate KPS. Maleic acid terminated poly(N-acetylethylenimine) (PNAEI) with two different chain lengths was also included in the recipe, as a cosurfactant and a comonomer. FTIR and ¹H-NMR proved incorporation of the macromonomer in the structure. High polymerization yields were achieved upto 98%. The viscosity average molecular weights of the copolymers were in the range of 2.77-5.50 × 10⁵. The glass transition temperatures of these copolymers were between 50.0 and 63.9 °C. The average diameter of nanoparticles were in range of 40-96 nm. It was possible to produce nanoparticles smaller than 100 nm and with narrower size distributions by using much lower concentrations of SDS by including the macromonomers in the microemulsion polymerization recipe.     

Synthesis and characterization of poly(p-arylene sulfide ketone/Schiff base) copolymers

Poly(p-arylene sulfide ketone/Schiffbase) copolymers (PASK/SB) were prepared by solution polycondensation of 4,4'-diflurobenzophenone (DFBP) and N-phenyl(4,4'-diflurodiphenyl) ketimine (DFBI) with sodium sulfide in the presence of sodium hydroxide under normal pressure.Elemental analyses,FT-IR,NMR,D     

Synthesis and characterization of poly(ethylene glycol) methyl ether endcapped poly(ethylene terephthalate)

Linear and branched poly(ethylene terephthalate) (PET) copolymers with polyethylene glycol) (PEG) methyl ether (700 or 2000 g/mol) end groups were synthesized using conventional melt polymerization. DSC analysis demonstrated that low levels of PEG end groups accelerated PET crystallization. The incorporated PEG end groups also decreased the crystallization temperature of PET dramatically, and copolymers with a high content of PEG (>17.6 wt%) were able to crystallize at room temperature. Rheological analysis demonstrated that the presence of PEG end groups effectively decreased the melt viscosities and facilitated melt processing. XPS and ATR-FTIR revealed that the PEG end groups tended to aggregate on the surface, and the surface of compression molded films containing 34.0 wt% PEG were PEG rich (85 wt% PEG). PEG end-capped PET (34.0 wt% PEG) and PET films were immersed into a fibrinogen solution (0.7 mg/mL BSA) for 72 h to investigate the propensity for protein adhesion. XPS demonstrated that the concentration of nitrogen (1.05%) on the surface of PEG endcapped PET film was statistically lower than PET (7.67%). SEM analysis was consistent with XPS results, and revealed the presence of adsorbed protein on the surface of PET films.     

Preparation and characterization of poly(acrylic acid)-based nanoparticles

The present investigation describes the synthesis and characterization of nanoparticles based on poly(acrylic acid) (PAA) intramolecularly cross-linked with diamine, 2,2′-(ethylenedioxy)bis(ethylamine), using water-soluble carbodiimide. The aqueous colloid dispersions of nanoparticles were clear or mildly opalescent depending on the ratio of cross-linking, pH of the solution, and the molecular weight of PAA, finding consistent with values of transmittance between 3% and 99%. The structure was determined by nuclear magnetic resonance spectroscopy, and the particle size was identified by dynamic light scattering (DLS) and transmission electron microscopy (TEM) measurements. It was found that particle size depends on the pH, and at a given pH, it was caused by the ratio of cross-linking and the molecular weight of PAA. Particle size measured by TEM varied in the range of 20 and 80 nm. In the swollen state, the average size of the particles measured by DLS was in the range of 35–160 nm.     

Synthesis and characterization of poly(vinylpyrrolidone-co-vinylphosphonic acid) copolymers

Radical copolymerizations of 1-vinyl-2-pyrrolidone (VP) with vinylphosphonic acid (VPA) at different feed ratios were investigated. The copolymers were characterized by ¹H-NMR, ¹³C-NMR and FT-IR. The copolymer composition was determined from the elemental analysis. Thermogravimetric analysis (TG) illustrates that the copolymers are stable up to 200 °C. Temperature dependence of the alternating current (AC) conductivities were investigated by means of impedance spectroscopy. The direct current (DC) conductivities of the samples are derived from the AC conductivity data.     

Synthesis and characterization of perfluorohexylated poly(3,4-ethylenedioxythiophene)

The perfluorohexylated 3,4-ethylenedioxythiophene 5 was prepared via Mitsunobu reaction of perfluorohexylatyed diol 2 with diethyl 3,4-dihydroxythiophenedicarboxylate followed by decarboxylation. The polymerization of 5 was conducted with both oxidative chemical and electrochemical polymerizations. The polymers were characterized by cyclic voltammogram, UV, IR, TGA and DSC.     

Preparation and characterization of carboxylic-containing poly(methyl methacrylate) nanolatexes

Poly(methyl methacrylate) (PMMA)-based latex particles bearing carboxylic groups at the surface were prepared via emulsion polymerization. The polymerization recipe and process were optimized in order to target monodisperse particles with diameters around 100 nm. The polymerizations were performed using 4,4-azobis(4-cyanopentanoic) acid (ACPA) as initiator and sodium dodecyl sulphate (SDS) as surfactant. The polymerization conversion was determined by both gas chromatography and gravimetry. The final latexes were characterized with respect to particle size, size distribution, surface charge density, electrokinetic properties (i.e. electrophoretic mobility vs pH and ionic strength) and colloidal stability (i.e. coagulation rate constants vs pH and stability factor vs ionic strength).     

Gelatin/poly(aniline) composite films: Synthesis and characterization

In this work, glyoxal (Glox) - crosslinked gelatin (Gel) films have been loaded with aniline molecules, followed by their in-situ oxidative polymerization to yield Gel/poly(Ani) composite films. The films, so prepared, have been characterized by FTIR, XRD, TGA and AFM analysis. The water absorption of these films has been studied in the physiological fluid of pH 7.4 at 37°C.The dynamic water uptake data has been interpreted by various kinetic models such as power function model and Schott kinetic model. The various diffusion coefficients have also been evaluated.     

Synthesis and characterization of micro/nanoparticles of poly(vinylalcohol-co-vinylcinnamate) derivatives

Various poly(vinylalcohol-co-vinylcinnamate) derivatives including poly(vinylalcohol-co-vinylcinnamate), poly(vinylalcohol-co-vinyl-4-methoxycinnamate), poly(vinylalcohol-co-vinyl-2,4-dimethoxycinnamate) and poly(vinylalcohol-co-vinyl-2,4,5-trimethoxycinnamate) were synthesized by grafting poly(vinylalcohol) with appropriate cinnamoyl groups. The self-assembly of grafted products into spherical micellar nanoparticles was performed, and particles were analyzed using dynamic light scattering, scanning electron microscopy, and transmission electron microscopy. ¹H NMR analyses of the well-dispersed micellar particle suspensions and polymer solutions indicated that the hydroxyl groups of the polymer were on the outer surface of the spheres, while the cinnamoyl moieties were buried inside the spheres forming crystalline structure. Polymer with a higher degree of cinnamoyl substitution gave smaller particles upon self-assembly. Variations in particle sizes obtained from PV(OH) grafted with cinnamoyl derivatives of different methoxy substitution on the benzene ring were observed. Molecular weight of the polymers did not significantly affect nanoparticle size and morphology. In addition, self-assembly of the poly(vinylalcohol-co-vinylcinnamate) derivatives into hollow reverse micellar microparticles of uniform size was also demonstrated. ¹H NMR spectrum of the reverse micellar micro-particle suspension indicated that the cinnamoyl moieties were not in a crystalline state.     

pH-thermoreversible hydrogels. I. Synthesis and characterization of poly(N-isopropylacrylamide/maleic acid) copolymeric hydrogels

N-isopropylacrylamide (NIPAAM)/maleic acid (MA) copolymeric hydrogels were prepared by irradiating the ternary mixtures of NIPAAM/MA/Water by γ-rays at ambient temperature. The influence of external stimuli such as pH and temperature of the swelling media on the equilibrium swelling properties was investigated. The hydrogels showed both temperature and pH responses. The effect of comonomer concentration and irradiation dose on the swelling equilibria and phase transition was studied. For the characterization of these hydrogels, the diffusion behaviour and molecular weight between crosslinks were investigated.     

Synthesis and curing of poly(glycidyl methacrylate) nanoparticles

Glycidyl‐functional polymer nanoparticles [poly(glycidyl methacrylate) (PGMA)] were fabricated with microemulsion polymerization. The successful fabrication of PGMA nanoparticles was confirmed by Fourier transform infrared spectroscopy and transmission electron microscopy (TEM). A TEM image showed that the average diameter of the PGMA nanoparticles was approximately 10–28 nm and was fairly monodisperse. As the surfactant concentration increased, the average size of the nanoparticles decreased and approached an asymptotic value. A significant reduction of the nanoparticle size to the nanometer scale led to an enhanced number of surface functionalities, which played an important role in the curing reaction. The PGMA nanoparticles were cured with a low‐temperature curing agent, diethylene triamine, to produce ultrafine thermoset nanoparticles. The low‐temperature curing process was performed below the glass‐transition temperature of PGMA to prevent the coagulation and deformation of the nanoparticles. A TEM image indicated that the cured PGMA nanoparticles did not exhibit interparticle aggregation and morphological transformation during curing. The average size of the cured PGMA nanoparticles was consistent with that of the pristine PGMA nanoparticles © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2258–2265, 2005     

Synthesis and characterization of semicrystalline cycloaliphatic polyester/poly(dimethylsiloxane) segmented copolymers

High molecular weight poly(dimethylsiloxane)/semicrystalline cycloaliphatic polyester segmented copolymers based on dimethyl-1,4-cyclohexane dicarboxylate were prepared and characterized. The copolymers were synthesized using a high trans content isomer that afforded semicrystalline morphologies. Aminopropyl-terminated poly(dimethylsiloxane) (PDMS) oligomers of controlled molecular weight were synthesized, end capped with excess diester to form a diester-terminated oligomer, and incorporated via melt transesterification step reaction copolymerization. The molecular weight of the polysiloxane and chemical composition of the copolymer were systematically varied. The polysiloxane segment was efficiently incorporated into the copolymers via an amide link and its structure was unaffected by low concentrations of titanate transesterification catalyst, as shown by control melt experiments. The homopolymer and copolymers were characterized by solution, thermal, mechanical, and surface techniques. The segmented copolymers were microphase separated as determined by differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), and by transmission electron microscopy (TEM). It was demonstrated that relatively short poly(dimethylsiloxane) segment lengths and compositions were required to maintain single phase melt polymerization conditions. This was, in fact, the key to the successful preparation of these materials. The copolymers derived from short poly(dimethylsiloxane) segments demonstrated good mechanical properties, melt viscosities representative of single phase polymer melts, and were easily compression molded into films. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 3495–3506, 1997     

Synthesis and characterization of poly (2-vinylpridine)-b-poly (t-butyl methacrylate)

The synthesis of well defined and monodisperse (M_w/M_n ≤ 1.2) narrow molecular weight distribution poly (2-vinylpyridine)-poly (t-butyl methacrylate) (P2VP-PTBMA) AB block copolymers is carried out by initiation of 2-vinylpyridine polymerization by 1,1-diphenylhexyllithium in THF at-78°C, followed by addition of TBMA and termination at ?78°C using MeOH. The formation of the BAB block copolymer is carried out in a similar fashion except that 1,4-dilithio-1,1,4,4-tetraphenylbutane is used as initiator. The corresponding synthesis of P2VP-PMMA block copolymers is carried in a similar manner, except that 1-2 equivalents of TBMA is used to end-functionalize the living P2VP before the addition of MMA. Without the addition of TBMA, trimodal molecular weight distributions in P2VP-b-PMMA are obtained. All the block copolymers are characterized by Size Exclusion Chromatography (SEC), Nuclear Magnetic Resonance (NMR), and Differential Scanning Calorimetry (DSC). © 1994 John Wiley & Sons, Inc.     

Synthesis and characterization of poly(methyl methacrylate)‐block‐poly(methylphenylsilane)‐ block‐poly(methyl methacrylate) by atom transfer radical polymerization

ABA block copolymers of methyl methacrylate and methylphenylsilane were synthesized with a methodology based on atom transfer radical polymerization (ATRP). The reaction of samples of α,ω‐dihalopoly(methylphenylsilane) with 2‐hydroxyethyl‐2‐methyl‐2‐bromoproprionate gave suitable macroinitiators for the ATRP of methyl methacrylate. The latter procedure was carried out at 95 °C in a xylene solution with CuBr and 2,2‐bipyridine as the initiating system. The rate of the polymerization was first‐order with respect to monomer conversion. The block copolymers were characterized with ¹H NMR and ¹³C NMR spectroscopy and size exclusion chromatography, and differential scanning calorimetry was used to obtain preliminary evidence of phase separation in the copolymer products. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 30–40, 2003     

Synthesis of high molecular weight poly(methyl methacrylate) microspheres by suspension polymerization in the presence of silver nanoparticles

To prepare high molecular weight (HMW) poly(methyl methacrylate) (PMMA)/silver microspheres, methyl methacrylate was suspension-polymerized in the presence of silver nanoparticles using a low-temperature initiator at different conditions. The rate of conversion was increased with increasing initiator concentration. In the case of adding silver nanoparticles, the rate of polymerization decreased slightly. High monomer conversion (about 95%) was obtained in spite of low polymerization temperature of 30 °C. Under controlled conditions, PMMA/silver microspheres with various viscosity-average degree of polymerization (6,000–37,000) were prepared.     

Synthesis and thermal properties of poly(methyl methacrylate)-graft-(cellobiosylamine-C15)

Model experiments for synthesis of a comb-shaped copolymer with cellulose side-chains were performed with cellobiose derivatives. A novel cellobiose monomer, N-(15-methacryloyloxypentadecanoyl)-2,3,6-tri-O-acetyl-4-O-(2,3,4,6-tetra-O-acetyl-β-d-glucopyranosyl)-β-d-glucopyranosylamine (2) was prepared from heptaacetylcellobiosyl- amine. Homopolymerization of cellobiose monomer 2 and copolymerization of monomer 2 with methyl methacrylate (MMA) were performed using 2,2′-azobis(isobutyronitrile) (AIBN) as an initiator to obtain homopolymers 3-i (i = 1–4) and copolymers 3-i (i = 5–7), poly(methyl methacrylate)-graft-(heptaacetylcellobiosylamine-C15). The size exclusion chromatography—multi-angle laser light scattering (SEC-MALS) measurements revealed that comb-shaped homopolymers 3-i (i = 1–4) had more compact structures compared to copolymers 3-i (i = 5–7) at the same elution volume. Selective deacetylation of polymers 3-i (i = 1–7) gave novel cellobiose polymers 4-i (i = 1–7), poly(methyl methacrylate)-graft-(cellobiosylamine-C15). The amide linkages between cellobiose moiety and long-chain alkyl group, and the ester linkages between PMMA main-chain and long-chain alkyl group remained after deprotection. The differential scanning calorimetry (DSC) measurements revealed that the T _gs of the polymers 4-i (i = 1, 5, 6, 7) increased with increasing cellobiose composition in the polymers. It was indicated that cellobiose moieties of polymers 4-i (i = 1, 5, 6, 7) reduced the mobility of PMMA main-chain.     

Synthesis and Characterization of Polyaniline/Partially Phosphorylated Poly（vinyl alcohol） Nanoparticles

The polyaniline/partially phosphorylated poly（vinyl alcohol）（PANI/P-PVA） nanoparticles were prepared by the chemical oxidative dispersion polymerization of aniline monomer in 0.5 mol/L HC1 aqueous media with the partially phosphorylated poly（vinyl alcohol） （P-PVA） as the stabilizer and co-dopant. The PANI/P-PVA nanoparticles were characterized by transmission electron microscopy （TEM）, Fourier transform infrared spectroscopy （FTIR）, thermal gravimetric analysis （TGA）, X-ray diffraction （XRD）, electrical conductivity measurements and re-dispersion stability testing. All the results were compared with the properties of the conventional polyaniline in the emeraldine salt form （PANI ES）. It was found that the feeding ratio of P-PVA obviously affected the morphology, re-dispersion stability and electrical conductivity of the PANI/P-PVA nanoparticles. When the feeding ratio of P-PVA ranged from 40 wt% to 50 wt%, the PANI/P-PVA nanoparticles showed spherical shape with good uniformity, significant re-dispersion stability in aqueous media and good electrical conductivity.