NMR study of phase separation in D2O/ethanol solutions of poly(N-isopropylmethacrylamide) induced by solvent composition and temperature

¹H and ¹³C NMR spectroscopies were applied to investigate phase separation in solutions of poly(N-isopropylmethacrylamide) (PIPMAm) in D₂O/ethanol (EtOH) mixtures induced by solvent composition (cononsolvency) and temperature. Effects of EtOH content in D₂O/EtOH mixtures and temperature on the appearance and extent of the phase separation were characterized. Differences in mesoglobules formed during the phase separation induced by cononsolvency and temperature were found. For temperature-induced phase separation, ¹³C spin-spin relaxation times showed that besides the free EtOH expelled from the PIPMAm mesoglobules, there are also EtOH molecules bound in these mesoglobules. On the other hand, virtually no bound EtOH molecules were detected for mesoglobules formed as a consequence of the cononsolvency. For PIPMAm random copolymers containing negatively charged methacrylate units the phase separation induced by solvent composition was not observed.     

H NMR and IR study of temperature-induced phase transition of negatively charged poly(N-isopropylmethacrylamide-co-sodium methacrylate) copolymers in aqueous solutions

¹H NMR and IR spectroscopies were used to investigate the temperature-induced phase transition behaviour of poly(N-isopropylmethacrylamide-co-sodium methacrylate) [P(IPMAAm/MNa)] copolymers, containing in aqueous solutions negatively charged MNa units (i = 1-10 mol%), and the obtained results were compared with those obtained for poly(N-isopropylmethacrylamide) (PIPMAAm) homopolymer. For PIPMAAm/H₂O solution, IR spectra indicate that the transition temperatures for the hydrophilic CO groups are slightly higher (by ∼ 2 K) in comparison with hydrophobic CH₃ groups. The decreasing values of phase-separated fraction p_max and the decrescent hysteresis during gradual heating and cooling, both with increasing content of MNa units i in the copolymer, show that for copolymers with i ? 5 mol% the globular-like structures formed at temperatures above the respective LCST are rather porous and disordered with relatively low degree of polymer-polymer hydrogen bonding. While for P(IPMAAm/MNa) copolymers with i ? 5 mol% most water molecules are expelled from globular structures, for i < 5 mol% a certain portion of water (HDO) molecules is rather tightly bound in globular structures; at the same time no releasing process was detected for the bound water even for 90 h.     

Poly(N-isopropylacrylamide)/poly[(N-acetylimino)ethylene] thermosensitive block and graft copolymers

Block and graft copolymers with poly(N-isopropylacrylamide) and poly[(N-acetylimino)ethylene] (PNAI) sequences were synthesized via PNAI derivatives (macroinitiators or macromers). The polymerization yields for block copolymers synthesized in ethanol, using the PNAI macroinitiator, were low (<10%), except where photochemical polymerization was applied. By contrast, for the copolymerizations of N-isopropylacrylamide with the PNAI macromers, performed in alcoholic solution, quite high polymerization yields, around 80-90%, were reached. ¹H-NMR and IR spectral and differential scanning calorimeter thermal data confirmed the copolymer formation. Thermosensitivity of the copolymers was investigated by means of turbidimetric technique as a function of their nature, average molecular weight and composition. It was found that the length of the chain of the PNAI macromer and the content in hydrophilic PNAI units of the resulted copolymer affected this behavior.     

NMR and DSC study of temperature-induced phase transition in aqueous solutions of poly(N-isopropylmethacrylamide-co-acrylamide) copolymers

Combination of ¹H NMR spectroscopy and differential scanning calorimetry (DSC) was used to investigate temperature-induced phase transition in D₂O solutions of poly(N-isopropylmethacrylamide-co-acrylamide) random copolymers. Both the NMR and DSC data showed dependence on the acrylamide (AAm) content in the copolymer; with increasing AAm content, the phase transition is shifted to higher temperatures, and both phase-separated fractions determined by NMR and change of the enthalpy determined by DSC decrease faster than the content of thermosensitive N-isopropylmethacrylamide (NIPMAm) units in the copolymer. NMR data were used to construct van't Hoff plots, and changes of the enthalpy ΔH and entropy ΔS, characterizing the phase transition, were determined. As it follows from comparison of NMR and DSC thermodynamical parameters (ΔH values), the size of the cooperative units (domains), undergoing the transition as a whole, decreases with increasing AAm content in the copolymer since the NIPMAm collapsed domains are separated by regions with hydrated AAm and surrounding NIPMAm sequences.     

P NMR study of the stoichiometry, stability and thermodynamics of new complexation between uranyl (II) nitrate and N-methyliminobis(methylenephosphonic acid) in two binary D2O-DMSO-d6 solvent mixtures

The complexation reaction between uranyl (II) nitrate, and N-methyliminobis(methylenephosphonic acid) (MIDPH) was investigated in two different binary solvent mixtures of D₂O-DMSO-d₆ at various temperatures using ³¹P NMR spectroscopy. The exchange between the free ligand and the 1:1 complexed ligand was slow on the NMR timescale and two ³¹P NMR signals were observed. The formation constant of the resulting complex was evaluated from integration of the two ³¹P NMR signals. The values of thermodynamic parameters of the resulting complex (ΔH, ΔS and ΔG) were determined from the temperature dependence of the formation constants. In the two solvent mixtures studied, the resulting complex is enthalpy stabilized but entropy destabilized.     

Polymer-Solvent Interactions in Solutions of Thermoresponsive Polymers Studied by NMR and IR Spectroscopy

Summary: NMR relaxation and diffusion coefficient measurements revealed that a portion of water molecules is bound in mesoglobules formed in poly(N-isopropylmethacrylamide) (PIPMAm) and poly(vinyl methyl ether) (PVME) aqueous solutions above the LCST, with fast exchange between bound and free states (residence time ∼1 ms). Two types of bound water molecules were assigned to water bound inside mesoglobules and on their surface. For highly concentrated PVME/D₂O solutions (c ≥ 20 wt%) a slow exchange was detected by NMR for bound water (residence time = 2.1 s). For PIPMAm aqueous solution IR spectra indicate a two-steps character of the phase transition. For PIPMAm in D₂O/ethanol (EtOH) mixtures the globular structures were observed by NMR at 298 K for certain compositions of the mixed solvent (cononsolvency effect). Virtually no EtOH is bound in these globular structures, in contrast to the temperature-induced globular structures.     

Monomer reactivity ratios of N-isopropylacrylamide-itaconic acid copolymers at low and high conversions

Copolymers of N-isopropylacrylamide (NIPAAm) and itaconic acid (IA) having various compositions were synthesized using free radical solution polymerization in 1,4-dioxane at 50 °C with α,α′-azobisisobutyronitrile (AIBN) as initiator. The structures of the copolymers were confirmed by Fourier transform infrared (FTIR) spectroscopic technique. The copolymer compositions were determined by conductometric and potentiometric methods from the inflection points in the acid-base titration curves and by FTIR spectroscopy through recorded analytical absorption bands for NIPAAm (1620 cm⁻¹ for CO stretching of secondary amides) and for IA (1704 cm⁻¹ for CO stretching) units, respectively. Monomer reactivity ratios of IA (F₁)-NIPAAm (F₂) pair were estimated using the Finemann-Ross, the inverted Finemann-Ross, the Kelen-Tüdós and the extended Kelen-Tüdós graphical methods. The values ranged from 0.40 to 0.60 for r₁ and from 1.20 to 1.90 for r₂, depending on the conversion percentage, calculation methods of monomer reactivity ratios and determination methods of copolymer compositions. In all cases, r₁r₂ < 1 and r₁ < r₂ indicate the random distribution of the monomers in the final copolymers and the presence of higher amount of NIPAAm units in the copolymer than that in the feed, respectively.     

Random copolymers of N-isopropylacrylamide and methacrylic acid monomers with hydrophobic spacers: pH-tunable temperature sensitive materials

Two series of random copolymers of N-isopropylacrylamide (NIPAAm) and comonomers derived from methacrylic acid with a different number of methylene units as hydrophobic spacers (n=4, 7 and 10) were synthesized via free radicals. The first series was prepared having the acid groups methoxy-protected while the second series have the acid groups free. The NIPAAm-copolymers of both series were prepared varying the comonomer content from 5 to 20 mol%. All the copolymers were characterized by FTIR, DSC, ¹H NMR and SLS. The aqueous solution behaviour of the copolymers having methoxy-protected acid groups shows that the comonomer increases the hydrophobicity of the copolymer chain and decreases its lower critical solution temperature (LCST). For the copolymers having free acid groups, hydrogen-bonding is responsible for a further decrease in the LCST of these copolymers in pure water. In buffer solutions, every acid comonomer have a critical ionization degree (α_crit) above which the LCST increases with increasing comonomer content while at an ionization degree lower than α_crit the LCST decreases with increasing comonomer content. In dependence of comonomer content, number of methylene units in the spacer and the pH of the buffer solution, the LCST of the copolymers can be varied widely, showing that these random copolymers have pH-tunable temperature sensitivity.     

Aqueous solution properties of amphiphilic triblock copolymer poly(p-dioxanone-co-l-lactide)-block-poly(ethylene glycol)

A poly(ethylene glycol) (PEG)-based new amphiphilic block copolymer bearing the poly(p-dioxanone-co-l-lactide) (PPDO/PLLA) hydrophobic moieties was prepared. Depending on the copolymer composition and molecular weights, solubility of the polymeric samples in water was varied. Its diluted aqueous solution properties were studied by viscometry, dye solubilization, ¹H-NMR and dynamic light scattering. 1,6-Diphenyl-1,3,5-hexatriene solubilization and ¹H-NMR spectra carried out in CDCl₃ and D₂O were used to prove the existence of hydrophobic domains as the core of micelle. Average particle size of 60-165 nm with low polydispersity and lower negative zeta (ξ) potential of −3 to −14 mV were observed on the aqueous copolymer dispersion.     

Mononuclear hydridocarbonyl ruthenium complexes incorporating N2O2 bis-chelating ligands

The reactions of [RuH(CO)Cl(PPh₃)₃] with N,N^′-bis(salicylidine)-hydrazine (H₂bsh) and N,N^′-bis(salicylidine)-p-phenylene diammine (H₂bsp) in presence of KOH in methanol led in the formation of neutral mononuclear complexes with the formulations [RuH(CO)(PPh₃)₂(L)] (LHbsh or Hbsp). These present the first examples where the ligands H₂bsh or H₂bsp provide only two of its available donor sites for interaction with the metal centre. The complexes have been characterized by elemental analyses, FAB-MS, IR, ¹H, ¹³C, ³¹P NMR and electronic spectral studies. Molecular structure of the representative complex [RuH(CO)(PPh₃)₂(Hbsh)] have been determined by single crystal X-ray analysis.     

Cl/Cl isotope effects in Rh NMR of [RhCln(H2O)6−n] complex anions in hydrochloric acid solution as a unique ‘NMR finger-print’ for unambiguous speciation

A detailed analysis of the ³⁵Cl/³⁷Cl isotope effects observed in the 19.11 MHz ¹⁰³Rh NMR resonances of [RhCl_n(H₂O)_6−n]³⁻ⁿ complexes (n = 3–6) in acidic solution at 292.1 K, shows that the ‘fine structure’ of each ¹⁰³Rh resonance can be understood in terms of the unique isotopologue and in certain instances the isotopomer distribution in each complex. These ³⁵Cl/³⁷Cl isotope effects in the ¹⁰³Rh NMR resonance of the [Rh^35/37Cl₆]³⁻ species manifest only as a result of the statistically expected ³⁵Cl/³⁷Cl isotopologues, whereas for the aquated species such as for example [Rh^35/37Cl₅(H₂O)]²⁻, cis-[Rh^35/37Cl₄(H₂O)₂]⁻ as well as the mer-[Rh^35/37Cl₃(H₂O)₃] complexes, additional fine-structure due to the various possible isotopomers within each class of isotopologues, is visible. Of interest is the possibility of the direct identification of stereoisomers cis-[RhCl₄(H₂O)₂]⁻, trans-[RhCl₄(H₂O)₂]⁻, fac-[RhCl₃(H₂O)₃] and mer-[RhCl₃(H₂O)₃] based on the ¹⁰³Rh NMR line shape, other than on the basis of their very similar δ(¹⁰³Rh) chemical shift. The ¹⁰³Rh NMR resonance structure thus serves as a novel and unique ‘NMR-fingerprint’ leading to the unambiguous assignment of [RhCl_n(H₂O)_6−n]³⁻ⁿ complexes (n = 3–6), without reliance on accurate δ(¹⁰³Rh) chemical shifts.     

Crystalline O,O′-di-sec-butyl and O,O′-diethyl dithiophosphate platinum(II) complexes: Synthesis, C and P CP/MAS NMR, single crystal X-ray diffraction studies and thermal behaviour

Crystalline bis(O,O′-di-sec-butyldithiophosphato)platinum(II) was prepared and studied by means of ¹³C, ³¹P CP/MAS NMR spectroscopy and single-crystal X-ray diffraction. The unit cell of the platinum(II) compound is comprised of one centrosymmetric mononuclear molecule [Pt{S₂P(O-sec-C₄H₉)₂}₂], in which the dithiophosphate groups display structural equivalence in both ³¹P NMR and XRD data. A pair of the dithiophosphate ligands exhibit the same S,S′-bidentate chelating structural function and form two planar four-membered chelate rings, [PtS₂P], in this molecule. The planar configuration of the [PtS₄] chromophore in structure 1 is governed by the dsp²-hybrid state of platinum(II). The structural states of the dithiophosphate groups in two different samples of complex 1 (one crystallised from ethanol and the other one precipitated from an aqueous solution) are all characterised by almost rhombic ³¹P chemical shift tensors. The observed essential dispersion of the ³¹P NMR chemical shift is caused by a coexistence of six optical isomers of molecule 1. The thermal behaviour of this compound was studied by means of simultaneous thermal analysis (a combination of TG and DSC) under an argon atmosphere. The thermal behaviour shows that the mass of 1 is lost in three steps, involving successive thermal decompositions of the organic and inorganic parts of this compound with platinum(II) dithio-meta-phosphate and reduced metallic platinum as the intermediate and the final products, respectively.     

A water-soluble PPDO/PEG alternating multiblock copolymer: Synthesis, characterization, and its gel-sol transition behavior

Biodegradable and nontoxic alternating multiblock copolymers based on poly (p-dioxanone) (PPDO) and poly (ethylene glycol) (PEG) were synthesized by the coupling reaction of two bifunctional prepolymers, a dihydroxyl-terminated PPDO and dicarboxylated PEG. The prepolymers and the resulting PPDO/PEG multiblock copolymers were characterized by various analytical techniques such as FT-IR, ¹H NMR, GPC, DSC and TG. At high concentration levels above critical gelation concentration (CGC), the aqueous solution of copolymers formed a gel. Temperature-sensitive gel to sol transition behaviors were investigated by the test tube inverting method. Dynamic light scattering (DLS) was used to investigate the micelle of copolymers, whose association probably caused the gelation of the system. Therefore, this novel copolymer has a great potential in injectable drug-delivery system for long-term delivery of drugs.     

NMR Study on Polymer-Solvent Interactions during Temperature-Induced Phase Separation in Aqueous Polymer Solutions

Some possibilities of NMR spectroscopy (mainly spin-spin relaxation) in investigations of hydration and other polymer-solvent interactions during the temperature-induced phase separation in aqueous polymer solutions are described. A certain portion of water molecules bound in phase-separated mesoglobules was revealed. The residence time of the bound HDO for poly(vinyl methyl ether) (PVME)/D₂O solution (c = 6 wt%) is 1.2 ms. With time a slow release of originally bound water from the respective mesoglobules was observed. For highly concentrated PVME/D₂O solutions (c = 20–60 wt%), the residence time of bound HDO ≫ 2.7 ms and fractions of bound water unchanged even for 70 h were found. A similar behaviour as described above for water (HDO) was also found for EtOH molecules in PVME/D₂O/EtOH solutions.     

Reactions of Ru(Cp) complexes with P(o-tolyl)3

Reaction of [Ru(Cp^∗)(CH₃CN)₃](PF₆) with P(o-tolyl)₃ affords [Ru(Cp^∗){(η⁶-o-tolyl)P(o-tolyl)₂}](PF₆) (4) in which the P-atom is not coordinated to the metal. The solid-state structure of 4 has been determined. A related reaction with P(p-tolyl)₃ reveals a small quantity [Ru(Cp^∗){(η⁶-p-tolyl)P(o-tolyl)₂}](PF₆), in solution, but mostly the expected bis-phosphine complex. Reaction of the Ru(IV) dication, [Ru(Cp^∗)(η³-PhCHCHCH₂)(DMF)₂](PF₆)₂, with P(o-tolyl)₃ gives a mixture of the phosphonium salt, C₆H₅CHCHCH₂P(o-tolyl)₃ (9) and the dication [Ru(Cp^∗) (η⁶-C₆H₅CHCHCH₂P(o-tolyl)₃)](PF₆)₂ (10). Salt 9 forms via attack of the P-atom on the allyl ligand. The latter product results from complexation of 9 via the phenyl group of the former allyl ligand. It would seem that the sterically demanding P(o-tolyl)₃ ligand is not readily compatible with the Ru(Cp^∗) fragment, in either the +2 or +4 oxidation state. Detailed NMR studies are reported.     

Synthesis and phase separation of amine-functional temperature responsive copolymers based on poly(N-isopropylacrylamide)

Free radical copolymerizations of N-isopropyl acrylamide (NIPAM) and cationic N-(3-aminopropyl) methacrylamide hydrochloride (APMH) were investigated to prepare amine-functional temperature responsive copolymers. The reactivity ratios for NIPAM and APMH were evaluated in media of different ionic strength (r_NIPAM = 0.7 and r_APMH = 0.7-1.2). Phase separation behavior of the random copolymers with only 5 mol% of the APMH was found to be suppressed in pure water at temperatures up to 45 °C due to electrostatic repulsion among the cationic amine groups randomly distributed along the copolymer chain. Alternate sequential addition of PNIPAM/APMH mixtures and pure NIPAM was used to provide increased control of the location of APMH units along the chain. Consequently (close to) homo-PNIPAM block(s) were formed as evidenced by its characteristic phase transition at 33 °C. The influences of the monomer feeding time and feeding interval time to the APMH distribution were investigated to prepare copolymers with thermo-induced phase separation under physiologically relevant temperature and to determine the extent of conjugation to poly(ethylene oxide).     

Polystyrene latex particles coated with crosslinked poly(N-isopropylacrylamide)

Thermoresponsive colloidal particles were prepared by seeded precipitation polymerization of N-isopropylacrylamide (NIPAM) in the presence of a crosslinking monomer, N,N-methylenebisacrylamide (MBA), using polystyrene latex particles (ca. 50 nm in diameter) as seeds in aqueous dispersion. Phase transitions of the prepared poly(N-isopropylacrylamide), PNIPAM, shells on polystyrene cores were studied in comparison to colloidal PNIPAM microgel particles, in H₂O and/or in D₂O by dynamic light scattering, microcalorimetry and by ¹H NMR spectroscopy including the measurements of spin–lattice (T1) and spin–spin (T2) relaxation times for the protons of PNIPAM. As expected, the seed particles grew in hydrodynamic size during the crosslinking polymerization of NIPAM, and a larger NIPAM to seed mass ratio in the polymerization batch led to a larger increase of particle size indicating a product coated with a thicker PNIPAM shell. Broader microcalorimetric endotherms of dehydration were observed for crosslinked PNIPAM on the solid cores compared to the PNIPAM microgels and also an increase of the transition temperature was observed. The calorimetric results were complemented by the NMR spectroscopy data of the ¹H-signal intensities upon heating in D₂O, showing that the phase transition of crosslinked PNIPAM on polystyrene core shifts towards higher temperatures when compared to the microgels, and also that the temperature range of the transition is broader.     

Ru(II) complexes imparting N2O2 donor bis chelating ligand N,N-bis(salicylidine)-hydrazine in unusual coordination mode

The synthesis and characterization of binuclear ruthenium complexes [{(η⁶-C₆H₆)Ru}₂(μ-bsh)₂] (1), [{(η⁶-C₁₀H₁₄)Ru}₂(μ-bsh)₂] (2), [{(η⁶-C₆Me₆)Ru}₂(μ-bsh)₂] (3), and rhodium complex [{(η⁵-C₅Me₅)RhCl}₂(μ-bsh)] (4) (bsh=N,N^′-bis(salicylidine)-hydrazine dianion) are reported. The complexes have been fully characterized by analytical and spectral techniques and unusual coordination mode of the ligand H₂bsh has been confirmed by single crystal X-ray analysis of the complex 2. Structural data revealed extensive inter- and intra-molecular C-H?O and C-H?π interactions and involvement of methyl and isopropyl hydrogen from the p-cymene in hydrogen bonding.     

Structure of N,C,N-chelated organotin(IV) fluorides

The set of starting tri-, di- and monoorganotin(IV) halides containing N,C,N-chelating ligand (L^NCN = {1,3-[(CH₃)₂NCH₂]₂C₆H₃}⁻) has been prepared (1-5) and two compounds structurally characterized ([L^NCNPh₂Sn]⁺I₃⁻ (1c), L^NCNSnBr₃ (5)) in the solid state. These compounds were reacted with KF with 18-crown-6, NH₄F or L^CNnBu₂SnF to give derivatives containing fluorine atom(s). Triorganotin(IV) fluorides L^NCNMe₂SnF (2a) and L^NCNnBu₂SnF (3a) revealed monomeric structural arrangement with covalent Sn-F bond both in the coordinating and non-coordinating solvents, except the behaviour of 3a that was ionized in the methanol solution at low temperature. The products of fluorination of L^NCNSnPhCl₂ (4) and 5 were described by NMR in solution as the ionic hypervalent fluorostannates or the oligomeric species reacting with chloroform, methanol or moisture to zwitterionic monomeric stannate L^NCN(H)⁺SnF₄⁻ (5c), which was confirmed by XRD analysis in the solid state.     

Study of amphiphilic poly(1-dodecene-co-para-methylstyrene)-graft-poly (ethylene glycol): Part I. Preparation of poly(1-dodecene-co-para-methylstyrene) copolymer and its molecular weight regulation

Poly(1-dodecene-co-para-methylstyrene) copolymers with a broad composition range were prepared by an MgCl₂ supported TiCl₄ catalyst. The effects of temperature and hydrogen on catalyst activity were investigated. It was found that catalyst activity reached a maximum at around 60 °C, and then decreased with the rising temperature. Hydrogen showed an activation effect on the Ziegler-Natta catalyst. ¹H NMR and ¹³C NMR spectra showed that para-methylstyrene (pMS) could be effectively and randomly incorporated into the copolymer chains. The single glass transition indicated there was no block sequence in the copolymer. The copolymerization reaction was examined by the reactivity ratios of comonomers and the relatively low reactivity ratios of 1-dodecene and pMS indicated that both of them had little tendency of consecutive insertion and should be homogeneously distributed in the copolymer chains. Furthermore, the molecular weights of copolymers were regulated by chain transfer agents (diethyl zinc and hydrogen) and temperature. The molecular weights reduced greatly with the addition of diethyl zinc and hydrogen and with the increasing temperature.