Polymerization of lactams. 99 Preparation of polyesteramides by the anionic copolymerization of ε-caprolactam and ε-caprolactone

Polyesteramides derived from the cyclic monomers ε-caprolactam and ε-caprolactone have been synthesized by the anionic polymerization and characterized. ε-Caprolactam magnesium bromide was employed as unique initiator giving high yield of copolymer across the whole range of monomer concentrations at 150 °C. Owing to a variation of the content of ester and amide component in polyesteramide backbone a large variety of materials having diverse physico-chemical and mechanical properties have been prepared. Materials prepared were examined for mechanical characteristic. Thermal properties were characterized using DSC, temperature modulated DSC, Hi-Res^TM TGA and DMA. Viscosity measurements were employed for molecular characterization.     

Study of ε-caprolactone polymerization by NIR spectroscopy

Near-infrared (NIR) spectroscopy is proposed for the in-line quantitative and kinetic study of the polymerization of ε-caprolactone and eventually to facilitate real-time control of the manufacturing process. Spectra were acquired with a fibre-optic probe operating in transflectance mode immersed in the reactor. The NIR data acquired were processed using a multivariate curve resolution alternating least squares (MCR-ALS) algorithm. The proposed method allows calculation of the concentration and spectral profiles of the species involved in the reaction. The key point of this method is the lack of reference concentrations needed to perform the MCR-ALS method. The use of an extended spectral matrix using both process and pure analyte spectra solves the rank deficiency. The concentration profiles obtained were used to calculate a kinetic fitting of the reaction, but the method was improved by applying kinetic constraints (hard modelling). The rate constants of batches at different temperatures and the energy of activation for this reaction were calculated. Whenever possible, the hard modelling combined with the MCR-ALS method improves the fit of the experimental data: the results show good correlation between the NIR and reference data and allow the collection of high-quality kinetic information on the reaction (rate constants and energy of activation).     

Exploitation of dinuclear salan aluminum complexes for versatile copolymerization of ε-caprolactone and L-lactide

By combining the influence of excess alcohol, temperature and monomer-to-initiator ratios in the feed, dinuclear salan aluminum complexes L(R)Al(2)Me(4) exhibited a high degree of control towards the copolymerization of L-LA and ε-CL, producing blocky, gradient, tapered and random copolymers.     

The copolymerization of L-lactide and ε-caprolactone using magnesium octoate as a catalyst

Copolymerizations of L-lactide （L-LA） and ε-caprolactone （ε-CL） were conducted in bulk using magnesium octoate as a catalyst. The reactivity ratios of L-LA and ε-CL were determined to be rL=23 and rc=0.22, respectively. The sequence analyses of the copolymers were performed on ^13C NMR. An increase in the reaction temperature enhances the role of transesterification and the extent of randomness.     

The copolymerization of L-lactide and ε-caprolactone using magnesium octoate as a catalyst

Copolymerizations of L-lactide (L-LA) and ε-caprolactone (ε-CL)were conducted in bulk using magnesium octoate as a catalyst.The reactivity ratios of L-LA and ε-CL were determined to be rL=23 and rC=0.22,respectively.The sequence analyses of the copolymers were performed on 13C NMR. An increase in the reaction temperature enhances the role of transesterification and the extent of randomness.     

Gradient copolymers of ε-caprolactone and δ-valerolactone via solvent-free ring-opening copolymerization with a pyridyl-urea/MTBD system

The ring-opening copolymerization of ε-caprolactone and δ-valerolactone was carried out under solvent-free conditions with a pyridyl-urea ( 6C-PU )/7-methyl-1,5,7-triazabicyclo[4.4.0]dec-5-ene catalytic system by premixing two monomers, yielding gradient copolyesters with cyclic and linear structures in the absence or presence of an initiator, respectively. The random and block copolyesters of these two monomers were also prepared for comparison. The results of ¹H and ¹³C NMR spectra determined the linear and cyclic structure of copolymers. The kinetic experiment was used to determine the consuming rates of two monomers during the polymerization. The topologies and thermal properties of all the copolymers were characterized and compared by NMR and DSC.     

Thermodynamical properties of ε-caprolactone

The values of the combustion and enthalpies of formation for ε-caprolactone were determined by means of combustion calorimetry. The vapor pressures of lactone were measured in the range of 283–353 K, and the value of its enthalpy of vaporization was estimated by the transpiration method. Conformational analysis and calculations of the equilibrium structures, inertia moments, and sets of fundamental vibrations was performed by the B3LYP/6-311++G(3 df, 3 pd) quantum-chemical method. The total energies of the most stable lactone conformers were found and Δ_fH(g) was estimated using the composite G3MP2 method. The set of fundamental vibrations for the most stable conformers of the compound was developed on the basis of the available experimental IR spectra and calculated vibration frequencies. The values of the thermodynamic properties of ε-caprolactone were determined in the ideal ga s state in the range of 0—1500 K. A set of reliable and interconsistent thermodynamic parameters for ε-caprolactone was created. Thermodynamic analysis for liquid-phase polymerization of s-caprolactone in the temperature range of 220—500 K was carried out.     

Ring-opening polymerization of ε-caprolactone from cellulose acetate by reactive processing

Cellulose - The internal plasticization of cellulose acetate (CA) was achieved by grafting with ε-caprolactone (CL) via reactive processing. The effect of varying concentrations of tin(II)...     

Copolymerisation of ε-caprolactone and trimethylene carbonate catalysed by methanesulfonic acid

The copolymerisation of ε-caprolactone (ε-CL) and trimethylene carbonate (TMC) catalysed by methanesulfonic acid was investigated. Preliminary copolymerisation tests using a monofunctional initiator confirm that the side bidirectional propagation previously detected in the homopolymerisation of TMC is also present in the copolymerisation. The comonomers in the ε-CL/TMC system do not follow first order kinetics. The values of the reactivity ratios obtained by the Kellen–Tüdös method (r_ε-CL = 2.90; r_TMC = 0.62) suggest that random copolymerisation can be achieved, although the copolymer will be richer in ε-CL. Dihydroxyl-telechelic ε-CL/ TMC random copolymers were prepared using a bifunctional initiator. ¹H and ¹³C NMR, SEC and DSC measurements show that the poly(TMC-co-ε-CL) samples presented the expected microstructural characteristics, a unimodal molar-mass distribution and a very narrow polydispersity. Based on these features a novel route for the preparation of block copolyesters with tuned properties, and highly regarded in the development of materials for biomedicine, may be foreseen.     

Controlled/living ring-opening polymerization of ε-caprolactone catalyzed by phosphoric acid

The bulk ring-opening polymerization(ROP) of ε-caprolactone(ε-CL) by various phosphoric acids using phenylmethanol as the initiator was conducted.1,1’-bi-2-Naphthol(BINOL)-based phosphoric acid was found to be an effective organocatalyst for ROP leading to polyesters at 90℃.The overall conversion to poly(ε-caprolactone) was more than 96% and poly(ε-caprolactone) with M w of 8400 and polydispersity index of 1.13 was obtained.1 H NMR spectra of oligomers demonstrated the quantitative incorporation of the protic initiator in the polymer chains and showed that transesterification reactions did not occur to a significant extent.The controlled polymerization was indicated by the linear relationships between the number-average molar mass and monomer conversion or monomer-to-initiator ratio.In addition,the present protocol provided an easy-to-handle,inexpensive and environmentally benign entry for the synthesis of biodegradable materials as well as polyesters for biomedical applications.     

Tuning the Properties of Ester-Based Degradable Polymers by Inserting Epoxides into Poly(ϵ-caprolactone)

A series of ester-ether copolymers were obtained via the reaction between α,ω-dihydroxyl poly(ϵ-caprolactone) (PCL) and ethylene oxide (EO) or monosubstituted epoxides catalyzed by strong phosphazene bases. The two types of monomeric units were distributed in highly random manners due to the concurrence of epoxide ring-opening and fast transesterification reactions. The substituent of epoxide showed an interesting bidirectional effect on the enzymatic degradability of the copolymer. Compared with PCL, copolymers derived from EO exhibited enhanced hydrophilicity and decreased crystallinity which then resulted in higher degradability. For the copolymers derived from propylene oxide and 1,2-butylene oxide, the hydrophobic alkyl pendant groups also allowed lower crystallinity of the copolymers thus higher degradation rates. However, further enlarging the pendant groups by using styrene oxide or 2-ethylhexyl glycidyl ether caused a decrease in the degradation rate, which might be ascribed to the higher bulkiness hindering the contact of ester groups with lipase.     

Tuning the thermal properties of poly(ethylene)-like poly(esters) by copolymerization of ε-caprolactone with macrolactones,in the presence of a pyridylamidozinc(II) complex

Linear aliphatic poly(ester)s, as thermoplastic materials, are more and more envisaged as the potential “green” alternative to traditional plastics. Aliphatic polyesters having long methylene chain behave as “polyethylene-like” materials and can be prepared by ring-opening polymerization (ROP) of macrolactones. A pyridylamidozinc(II) complex was used for the ROP of ε-caprolactone (CL) and of two large ring size lactones, the ω-6-hexadecenlactone (6HDL) and the ω-pentadecalactone (PDL). High turnover frequencies were observed for the CL polymerization, while for the macrolactones, an entropy-driven behavior was recognized. Random copolymerizations of the PDL with 6HDL and of the macrolactones with CL were successfully achieved, and the copolymer microstructure was ascertained by NMR and MALDI analyses. The copolymer melting temperatures, measured by DSC, and the thermal degradation behavior, studied by TGA in nitrogen and air atmosphere, were dependent on the copolymer's composition. © 2020 Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 528–539     

Copolymer of lactide and ε-caprolactone catalyzed by bimetallic Schiff base aluminum complexes

A series of copolymers of lactide(LA) and e-caprolactone(ε-CL) with different monomer feed ratios were achieved using three kinds of bimetallic Schiff aluminum complexes as catalysts. The ratios of LA and ε-CL units in different copolymers and the average segments length were determined by NMR analysis. The comparative kinetic study of L-LA/ε-CL and rac-LA/ε-CL copolymerization systems showed that the polymerization rate of LA was faster than ε-CL, and L-LA showed polymerization rate slightly faster than rac-LA. It was inferred that the copolymers achieved by these complexes were gradient copolymers with gradual change in distribution of LA and e-CL units. The thermal properties of these copolymers were characterized by DSC analysis, which showed that the glass transition temperature(Tg) of these copolymers changed regularly according to the pro-portion change of two structural units.     

Electrospinning of polyesteramides based on ε-caprolactam and ε-caprolactone from solution

The paper is focused on the preparation of nanofiber layers of polyesteramides with various ratios of ε-caprolactam/ε-caprolactone structural units. We have studied the effect of the system parameters, i.e., the composition of the copolymer, its molar mass and the concentration of the solution on morphology of fiber layers being formed during the electrostatic wet spinning. The process parameters were constant during the processing. Morphology of the fiber layers is given by the composition of the copolymer, i.e., by its polarity, the content of the crystalline phase and thus its separation in the process of evaporating the solvent. Fibers with diameters ranging from 100 to 160 nm were obtained for polyesteramides containing 20 or 40 mol% lactone units during optimizing the system parameters, i.e., the concentration of the solution and molar mass of polyesteramide.     

Vapour pressure data of ε-caprolactone, δ-hexalactone,and γ-caprolactone

This work reports new vapour pressure data of ε-caprolactone, δ-hexalactone, and γ-caprolactone. Vapour pressure measurements were carried out over the temperature range of (283 to 343) K using the static method with a differential pressure transducer. Degassing was performed inside the equilibrium cell by freezing and thawing the samples under moderate vacuum (about 50 kPa). For ε-caprolactone and δ-hexalactone vapour pressure values varied in the range of (0.045 to 0.769) kPa and (0.005 to 0.354) kPa, respectively, while for γ-caprolactone a maximum value of 1.367 kPa was found. Experimental vapour pressure data were correlated by the Antoine equation with a good agreement between experiment and model.     

Preparation of polystyrene/silica nanocomposites by radical copolymerization of styrene with silica macromonomer

A two-stage process has been developed to generate the silica-based macromonomer through surface-modification of silica with polymerizable vinyl groups. The silica surfaces were treated with excess 2,4-toluene diisocynate (TDI), after which the residual isocyanate groups were converted into polymerizable vinyl groups by reaction with hydroxypropylacrylate (HPA). Thus, polystyrene/silica nanocomposites were prepared by conventional radical copolymerization of styrene with silica macromonomer. The main effecting factors, such as ratios of styrene to the macromonomer, together with polymerization time on the copolymerization were studied in detail. FTIR, DSC and TGA were utilized to characterize the nanocomposites. Experimental results revealed that the silica nanoparticles act as cross-linking points in the polystytene/silica nanocomposites, and the glass transition temperatures of the nanocomposites are higher than that of the corresponding pure polystyrene. The glass transition temperatures of nanocomposites increased with the increasing of silica contents, which were further ascertained by DSC.     

Lanthanum heterocyclic Schiff-base complex initiated ring-opening polymerization of ε-caprolactone

Lanthanum complex supported by the heterocyclic Schiff-base ligand of N-(2-pyridyl)-3,5-di-tert-butyl-salicylaldimine was prepared and employed for the ring-opening polymerization(ROP)ofε-caprolactone(ε-CL).The polymers obtained with this initiator showed a unimodal molecular weight distribution implied that only one active species was present.Mechanism study revealed that the polymerization proceeds via acyl-oxygen bond cleavage.     

In-situ copolymerization of aniline with alkyl amine by APS： Kinetics and application

The kinetic study of in-situ eopolymerization of aniline with o- and p-methylaniline by ammonium persulfate （APS） has been carried out. UV-vis spectroscopic method was used to investigate the course of copolymerization. Structural characterization was studied by PT-IR spectral analysis. The electronic spectra of the copolymers poly（aniline-co-p-toluidine） and poly（aniline-co-o- toluidine） show blue shift. The shift has been observed in the bands corresponding to π→π^＊ transition as well as in the exciton transition. The increase in absorbance recorded during the reaction for different concentration of aniline, o- and p-toluidine at various intervals of time of polymerization reaction indicates a growth in the polymer formation. The resulting first-order rate constant was used to calculate the rate of copolymer formation using the rate equation -d[A]/dt = kc^n.     

Ring-opening polymerization of ε-caprolactone by lithium piperazinyl-aminephenolate complexes: synthesis, characterization and kinetic studies

A series of lithium complexes were prepared from 2(N-piperazinyl-N'-methyl)-2-methylene-4-R'-6-R-phenols ([ONN](RR')) and characterized through elemental analysis, (1)H and (13)C{(1)H} NMR spectroscopy, and X-ray crystallography. Treatment of the ligands with n-butyllithium afforded {Li[ONN](RR')}(3) [R = Me, R' = (t)Bu, (1); R = R' = (t)Bu (2); R = R' = (t)Am, (3), (t)Am = C(CH(3))(2)CH(2)CH(3)], with trimetallic structures in the solid-state as shown by single-crystal X-ray diffraction. The reactivity of these complexes in the ring-opening polymerization of ε-caprolactone (ε-CL), as well as the influences of monomer concentration, monomer/Li molar ratio, polymerization temperature and time, was studied. Rates of polymerization were first order with respect to both monomer and lithium concentrations, and activation energies for the reactions were determined. MALDI-TOF MS analysis revealed that transesterification had occurred during the polymerization.