Rheology and thermal stability of polylactide/clay nanocomposites

Polylactide/clay nanocomposites (PLACNs) were prepared by melt intercalation. The intercalated structure of PLACNs was investigated using XRD and TEM. Both the linear and nonlinear rheological properties of PLACNs were measured by parallel plate rheometer. The results reveal that percolation threshold of the PLACNs is about 4 wt%, and the network structure is very sensitive to both the quiescent and the large amplitude oscillatory shear (LAOS) deformation. The stress overshoots in the reverse flow experiments were strongly dependent on the rest time and shear rate but shows a strain-scaling response to the startup of steady shear flow, indicating that the formation of the long-range structure in PLACNs may be the major driving force for the reorganization of the clay network. The thermal behavior of PLACNs was also characterized. However, the results show that with the addition of clay, the thermal stability of PLACNs decreases in contrast to that of pure PLA.     

A simple and green route to transparent boron nitride/PVA nanocomposites with significantly improved mechanical and thermal properties

A simple and green method is developed to prepare hexagonal boron nitride(h-BN)/poly(vinyl alcohol) (PVA) nanocomposites by using water as a common solvent of h-BN nanosheets and PVA.The obtained h-BN/PVA nanocomposites are highly transparent,and have significantly improved mechanical and thermal properties.They may outperform nano-clay and nano-alumina/PVA nanocomposites as flexible optoelectronic devices,optical windows and heat-releasing materials operated in oxidative or corrosive environment.     

Surface modified clay/polypropylene (PP) nanocomposites: Effect on physico-mechanical, thermal and morphological properties

Polypropylene/surface modified clay nanocomposites were prepared by melt intercalation in twin-screw extruder followed by blown film extrusion. The effects of organically modified clay on the physical, mechanical, thermal and morphological properties of the prepared nanocomposites were studied. The results showed that 95% enhancement in tensile strength and 152% increase in tensile modulus was observed. TGA analysis in inert atmosphere showed an 87 °C marked increase in the thermal degradation temperature. The DSC curve showed the melting point was increased 4 °C in presence of clay in the matrix owing to the fact that the filler acts as reinforcing effect. The dynamic mechanical analysis (DMA) results showed improvement in storage modulus from 9.76 × 10³ to 1.12 × 10⁴ MPa with the incorporation of organically modified clay and thus enhanced its stiffness. The morphology of the nanocomposites was further studied using scanning electron microscopy (SEM). The X-ray diffraction (XRD) and transmission electron microscopy (TEM) which confirmed the exfoliation structure of the nanocomposites.     

Tube-like natural halloysite/fluoroelastomer nanocomposites with simultaneous enhanced mechanical, dynamic mechanical and thermal properties

A novel kind of fluoroelastomer nanocomposites based on tube-like halloysite clay mineral were successfully prepared using a bis-phenol curing system, which resulted in prominent improvements in mechanical and dynamic mechanical properties and in the elevation as high as 30 K of the thermal decomposition temperature. Wide-angle X-ray scattering and transmission electron microscopy techniques were employed to assess the morphology developed in the nanocomposites, while stress strain diagrams were used to evaluate the mechanical properties. These nanocomposites were further characterized by moving die rheometer, dynamic mechanical properties and thermo-gravimetric analysis. Structure-properties relationship and the improvement of the mechanical, dynamic mechanical and thermal properties of fluoroelastomers are reported in the present study. Increasing amount of the filler reduced the curing efficiency of the bis-phenol curing system, which was evident from the rheometric and physical properties of the resulting composites. A sort of filler–filler interaction was perceived during the strain sweep analysis of the composites. The polymer–filler interaction was reflected in the improved mechanical and thermal properties which were the consequence of proper dispersion of the nanotubes in the polymer matrix; whereas the intercalation of macromolecular chains into the nanotubes was not reflected in the X-ray diffraction analysis.     

Effect of epoxy resin on rheology of polycarbonate/clay nanocomposites

Polycarbonate/clay nanocomposites (PCNs) were prepared by melt intercalation using epoxy resin as a compatibilizer. The intercalated structure of PCNs was investigated using XRD and TEM. The linear and nonlinear dynamic rheological properties of PCNs were measured by the use of a parallel plate rheometer. The results reveal that the presence of epoxy influences rheological behavior of PCNs significantly. Addition of epoxy can improve dispersion of clay, enhancing the low-frequency viscoelastic responses; while high loadings of epoxy lead to a severe degradation of PC matrix, decreasing the high-frequency responses together with the plasticizing effect of excessive epoxy. Both of these two effects result in invalidity of time-temperature superposition. Moreover, all samples show high sensitivity to both the quiescent and large amplitude oscillatory shear (LAOS) deformation, despite enhanced percolation of tactoids due to the compatibilization of epoxy.     

Effect of chemical structure on combustion and thermal behaviour of polyurethane elastomer layered silicate nanocomposites

The effect of polyol molecular weight and functionality on nanodispersion of clay in PU/clay nanocomposites and the investigation of their thermal and combustion properties are reported and discussed. Lamellar elastomer polyurethane nanocomposites were synthesized using polyols with different molecular weight and functionality and according to these parameters they show several degrees of dispersion which affect their thermal and combustion behaviour. A barrier effect of clay layer is shown in TGA experiments by a delay of thermal degradation products release in nanocomposite materials compared to the virgin polymer; this barrier effect also leads to formation of char during combustion which lowers the peak of rate of heat release in cone calorimeter tests and eliminates fire-induced dripping of the nanocomposite sample during UL 94 test. However, in order to achieve non-burning behaviour nanocomposite technology must be combined with conventional flame retardant technology.     

Mechanical and fire retardant properties of EVA/clay/ATH nanocomposites - Effect of particle size and surface treatment of ATH filler

Mechanical and flame retardant properties of ethylene vinyl acetate (EVA) copolymer/organoclay/alumina trihydrate (ATH) nanocomposites have been studied. ATH with different particle sizes, ATH1 (2.2-5.2 μm) and ATH2 (1.5-3.5 μm), and three different surface treatments, uncoated, fatty acid coated and silane coated, have been used. A synergistic effect was observed in EVA/organoclay/ATH nanocomposites with the total heat evolved (THE) and the heat release rate (HRR) lower than that of EVA/ATH composite. It was also found that mechanical and flame retardant properties are affected in different ways by the particle size and the surface treatment of ATH fillers. Improvements in tensile and flame retardant properties were observed in nanocomposites when uncoated ATH fillers and fatty acid coated ATH2 filler were used. On the other hand, silane coating on ATH1 and ATH2 improves limiting oxygen index (LOI) and leads to higher t_ignition and the best char stability after cone calorimeter test.     

Enhanced thermal and mechanical properties of poly (vinylidene fluoride) nanocomposites reinforced by liquid-exfoliated graphene

We report the preparation and enhanced thermal and mechanical properties of poly (vinylidine diflouride) (PVDF) nanocomposites reinforced by few-layer graphene flakes which are produced by the direct liquid-phase exfoliation of pristine graphite. Graphene flakes are found to homogeneously disperse in PVDF, reduce the bubble defects and thus the porosity of PVDF, and change PVDF’s crystallinity. Thermogravimetric analysis indicates that graphene can accelerate the fracture of hydrogen bond connecting PVDF and N-Methyl pyrrolidone molecules. 1.5?wt% graphene loading leads to around 20?°C enhancement in the melting temperature of PVDF. The mechanical properties like Young’s modulus (EIT), yield stress (σy), and hardness (H) of the nanocomposites are investigated by nanoindentation technique. A 1.0?wt% loading of graphene is found to increase EIT, σy, and H of PVDF by ～337%, ～102%, and ～228%, respectively.

• Highlights

• Few-layer graphene was produced by liquid-phase exfoliation.

• Graphene were added to PVDF to enhance thermal and mechanical properties of polymer.

• Mechanical properties of PVDF/graphene composite films were investigated by nanoindentation.

     

Preferential melt intercalation of clay in ABS/brominated epoxy resin-antimony oxide (BER-AO) nanocomposites and its synergistic effect on thermal degradation and combustion behavior

ABS/organo montmorillonite (OMT) nanocomposites and ABS/brominated epoxy resin-antimony oxide (BER-AO)/OMT nanocomposites were prepared via melt compounding. The dispersion of OMT in nanocomposites was investigated by wide-angle X-ray diffraction and transmission electron microscopy. The results revealed an intercalated structure in ABS/OMT nanocomposites and the OMT layers mainly distribute in SAN phase. However, a completely exfoliated structure was found in ABS/BER-AO/OMT nanocomposites and OMT layers preferentially located in the BER phase which indicated that the OMT platelets had a much higher affinity with brominated epoxy resin than ABS resin. Based on the above morphological results, a schematic diagram of the ABS/OMT, ABS/BER-AO/OMT nanocomposites was established. The thermal degradation behavior was characterized by thermogravimetry. The results showed that the exfoliation of OMT can enhance the thermal stability of pure ABS resin and ABS/BER blends. An increase in the limited oxygen index (LOI) value was observed with the addition of OMT and it was found that such an enhancement is closely related to the morphologies of the chars formed after combustion. A synergistic effect between OMT and BER-AO during the combustion of the nanocomposites was found and a schematic mechanism was presented.     

Effect of process variables on mechanical properties of polyurethane/clay nanocomposites

This paper addresses the effects of operating variables on mechanical properties of polyurethane/clay nanocomposites including tensile strength, abrasion resistance, and hardness. The variables were prepolymer type, clay cation, clay content, and prepolymer–clay mixing time. The experiments were carried out based on the design of experiments using Taguchi methods. The nanocomposites were synthesized via in situ polymerization starting from two different types of prepolymers (polyether‐ and polyester‐types of polyol reacted with toluene diisocyanate), and methylene‐bis‐ortho‐chloroanilline (MOCA) as a chain extender/hardener. Montmorillonite with three types of cation (Na⁺, alkyl ammonium ion, and MOCA) were examined. Among the parameters studied, prepolymer type and clay cation have the most significant effects on mechanical properties. Polyester nanocomposites showed larger improvements in mechanical properties compared to polyether materials due to higher shear forces exerted by polymer matrix on clay aggregates during polymer–clay mixing. The original MMT with Na⁺ cation results in weak improvements in mechanical properties compared to organoclays. It is observed that the stress and elongation at break, and abrasion resistance of the nanocomposite samples can be optimized with 1.5% of clay loading. The morphology and chemical structure of the optimum sample were examined by X‐ray diffraction and FT‐IR spectroscopy, respectively. Copyright © 2009 John Wiley & Sons, Ltd.     

Influence of clay modification on the properties of aramid-layered silicate nanocomposites

Nanocomposites from organoclay and aromatic polyamide were prepared using solution intercalation method. Aramid chains were synthesised by reacting 4-aminophenylsulfone with isophthaloyl chloride in dimethylacetamide. Dodecylamine was used as a modifier to change the hydrophilic nature of montmorillonite into organophilic. Suitable quantities of organoclay were mixed in the aramid solution with high-speed stirring for homogeneous dispersion of the clay. Thin films cast from these materials after evaporating the solvent were characterised. The morphology of nanocomposites was determined by X-ray diffraction and TEM. Results revealed the formation of delaminated and disordered intercalated clay platelets in the aramid matrix. Mechanical data indicated improvement in the tensile strength and modulus with clay loading up to 6 wt.%. The glass transition temperature increased up to 20 wt.% organoclay, suggesting better cohesion between the two phases and thermal stability augmented with increasing clay loading. The water uptake reduced gradually as a function of organoclay showing decreased permeability.     

Effect of sol-gel derived nano-silica and organic peroxide on the thermal and mechanical properties of low-density polyethylene/wood flour composites

The influence of nano-silica, synthesized and mixed with low-density polyethylene (LDPE) through a sol-gel process, on the thermal and mechanical properties of LDPE and LDPE/wood flour (WF) composites, prepared in the absence and presence of dicumyl peroxide, was investigated. Scanning electron microscopic (SEM) analyses show a uniform dispersion of silica nano-particles of size 10-50 nm in the matrix, and Fourier-transform infrared (FTIR) spectroscopic results indicated interaction between the nano-silica and the LDPE matrix, which seems to improve for samples prepared in the presence of dicumyl peroxide (DCP). WF and nano-silica, as well as the presence of DCP during sample preparation, substantially improve the thermal stability of the LDPE matrix. The tensile strength of the samples decreased with increasing wood flour content, while the tensile modulus substantially increased. The presence of nano-silica gave rise to lower values for both tensile strength and tensile modulus, while higher tensile strength (and an increase in tensile strength with WF content) is observed for samples prepared in the presence of DCP. The tensile modulus increases with increasing WF content, but is not substantially influenced by the presence of nano-silica or by sample preparation in the presence of DCP. The DMA results were in line with the tensile results.     

Studies of ABS-graft-maleic anhydride/clay nanocomposites: Morphologies, thermal stability and flammability properties

ABS-g-MAH (maleic anhydride) with different grafting degree, ABS/OMT (organo montmorillonite) and ABS-g-MAH/OMT nanocomposites were prepared via melt blending. The grafting reaction, phase morphology, clay dispersion, thermal properties, dynamic mechanical properties and flammability properties were investigated. FTIR spectra results indicate that maleic anhydride was successfully grafted onto butadiene chains of the ABS backbone in the molten state using dicumyl peroxide as the initiator and styrene as the comonomer and the relative grafting degree increased with increasing loading of MAH. TEM images show the size of the dispersed rubber domains of ABS-g-MAH increased and the dispersion is more uniform than that of neat ABS resin. XRD and TEM results show that intercalated/exfoliated structure formed in ABS-g-MAH/OMT nanocomposites and the rubber phase intercalated into clay layers distributed in both SAN phase and rubber phase. TGA results reveal the intercalated/exfoliated structure of ABS-g-MAH/OMT nanocomposites has better barrier properties and thermal stability than intercalated ones of ABS/OMT nanocomposites. The T_g of ABS-g-MAH/OMT nanocomposites was also higher than that of neat ABS/OMT nanocomposites. The results of cone measurements show that ABS-g-MAH/OMT nanocomposites exhibit significantly reduced flammability when compared to ABS/OMT nanocomposites even at the same clay content. The chars of ABS-g-MAH/OMT nanocomposites were tighter, denser, more integrated and fewer surface microcracks than ABS/OMT residues.     

Compatibilized polyamide 6/polyethylene blend-clay nanocomposites: Effect of the degradation and stabilization of the clay modifier

Blends of polyamide 6 (PA6) and high-density polyethylene (HDPE) were compatibilized using an already investigated method and a sample of Cloisite 15A, a montmorillonite modified with ammonium quaternary salts was added. The blends were prepared in a twin screw extruder and characterized from a morphological, rheological and mechanical point of view. The results indicated that, despite a good morphology achieved in the filled blends and a moderate intercalation of the clay, the mechanical properties are far from being good, especially the ultimate properties.In order to investigate the possible influence of the inhibition of the crystallization and of the degradation of the organic modifier of the clay, DSC measurements and FTIR-ATR were carried out. The results confirm that the clay causes a slight decrease of the crystallization, particularly in the HDPE phase. In addition, in the preparation conditions, the clay modifier is sensitive to thermo-oxidation. Both features can, therefore, explain the bad mechanical performance, even if the degradation effects seem to be more important. In order to prevent, or at least to reduce, the thermo-oxidation, a stabilizing system was added to the filled blends. In this case, the mechanical properties are improved for the entire compatibilized blend set.     

Effects of organoclay modifiers on the flammability, thermal and mechanical properties of polycarbonate nanocomposites filled with a phosphate and organoclays

Polycarbonate was melt blended with solid bisphenol A bis(diphenyl phosphate), and a series of organoclays. Effects of the organoclay modifiers on the flammability, thermal and mechanical properties of the nanocomposites were studied by limiting oxygen index, UL-94 burning test, thermogravimetric analysis, differential scanning calorimetry, tensile test and dynamic mechanical analysis. Although all the nanocomposites exhibit an intercalated-exfoliated morphology, they vary in the magnitude of intercalation revealed by X-ray diffraction and transmission electron microscopy. Flammability of the nanocomposites is strongly related to the thermal stability rather than the morphology. Glass transition temperature (T_g) and mechanical properties are controlled by both the morphology and the affinity of the organoclays with the matrix. The modifier containing hydroxyl moiety has stronger interactions with the matrix but it can promote its degradation, thus the corresponding nanocomposite exhibits a better intercalated morphology, higher T_g, superior strength and modulus however a worse thermal stability and flame retardancy. An additional silane within the organoclays would make the organoclays more compatible with the matrix but be a steric obstacle to the intercalation of the matrix chains; however, flame retardancy of the corresponding nanocomposite is enhanced due to the flame retardant nature of the silane. Similarly, the modifier bearing two long alkyl tails shows stronger affinity with the matrix than the one bearing a single tail, but it would hinder the intercalation due to the steric effect. These establishments between organoclay modifiers and the properties of nanocomposites might be guidance for developing materials with practical applications.     

Effect of acid treated multi-walled carbon nanotubes on the mechanical, permeability, thermal properties and thermo-oxidative stability of isotactic polypropylene

The effect of acid treatment of multi-walled carbon nanotubes (MWCNTs) on the mechanical, thermal and mainly thermo-oxidative stability of isotactic polypropylene (iPP) was evaluated. From the acid treatment surface carboxylic groups were mainly formed, while the nanotubes' length was gradually reduced by increasing the treatment time. Young's modulus, tensile strength and storage modulus of the iPP/MWCNT nanocomposites were increased by increasing the treatment time of the MWCNTs, due to finer dispersion inside the polymer matrix, as revealed by TEM and micro-Raman spectroscopy. Furthermore, the nanotubes acted as nucleating agents, an effect more pronounced with finer filler dispersion. Thermal stability in an inert atmosphere also increased. Thermo-oxidative stability tests in air and O₂ revealed that oxidative degradation took place in two stages. In the first stage, corresponding to temperatures up to 230 °C, the MWCNTs accelerated the oxidation of iPP, while at higher than 300 °C temperatures the trend was reversed. Incubation studies proved that, at the first stages, oxidation was due to random chain scission of iPP and oxygen uptake. This behaviour was accelerated by the MWCNTs' surface carboxylic groups and, as found by O₂ permeability studies, was mainly a surface process. In the second stage, due to the shielding effect of MWCNTs, the removal of the gases produced during decomposition was hindered. At this stage the presence of MWCNTs resulted in more thermo-oxidatively stable nanocomposites.     

Effect of thermal cycling and open-hole size on mechanical properties of polymer matrix composites

This paper investigates the effects of thermal cycling on mechanical degradation of polymer matrix composites (PMCs). Un-notched and open-hole specimens are tested using developed thermal cycling apparatus and tensile test machine. In addition, the hole-size effect of open-hole tension glass/epoxy composite laminates is investigated. The tensile strength, mass loss and surface degradation of the specimens were obtained during 250 cycles. Experimental results showed that the holes diameter is the main parameter to control the thermal cycling effects on open hole structure. Also, it is found that laminates with smaller holes have higher tensile strength variation than those with larger holes. The results showed that increment of the hole diameter and number of cycles decreases the tensile strength.     

The effect of halloysite nanotubes and N,N'- ethylenebis (stearamide) on the properties of polylactide nanocomposites with amorphous matrix

Amorphous polylactide/halloysite nanotube (PLA/HNT) nanocomposites were prepared and examined. Neat HNT and HNT treated with N,N'- ethylenebis(stearamide) (EBS) were used as nanofillers. The role of HNT and/or EBS content on the cold crystallization of amorphous PLA matrix, HNT dispersion, as well as on the dynamic mechanical and optical properties of the materials was determined.The PLA/HNT-based nanocomposites contained well-distributed nanotubes and occasionally micron-sized aggregates, especially at high loading. HNT, EBS treated HNT and EBS influenced the cold crystallization of PLA, therefore the formation of the disorder α′ and the order α crystallographic forms of PLA.The nanocomposites exhibited increased stiffness and decreased transparency compared to the neat PLA. Due to the reinforcing effect and additional specific features of HNT, the addition of the nanofiller allows tuning of the properties of the nanocomposites with amorphous PLA matrix.     

Thermal and mechanical interfacial properties of the DGEBA/PMR-15 blend system

In this work, the blend system of diglycidyl ether of bisphenol A and PMR-15 polyimide is investigated in terms of thermal and dynamic mechanical interfacial properties of the casting specimens. The thermal stabilities are studied by thermogravimetric and thermomechanical analyses, and the dynamic mechanical properties are carried out by dynamic mechanical analysis. The results show that the thermal stabilities based on the initial decomposition temperature, the integral procedural decomposition temperature, and the glass transition temperature are increased with increasing PMR-15 content. The crosslinking density (rho) of the blend system is increased at 10 phr of PMR-15, compared with that of neat epoxy. Mechanical interfacial properties measured in the context of critical stress intensity factor and critical strain energy release rate show similar behaviors with E(a) and rho, probably due to the increase in intermolecular interactions or hydrogen bondings in polymer chains.     

Structural characterization and thermal properties of polyamide 6.6/Mg, Al/adipate-LDH nanocomposites obtained by solid state polymerization

A new nanocomposite was obtained by dispersing an adipate-modified layered double hydroxide (Ad-LDH) with adipic acid and hexamethylene diamine. These samples were polymerized in the solid phase under a nitrogen flow for 200 min at 190 °C. The structural and compositional details of the nanocomposite were determined by powder X-ray diffraction (PXRD), fourier transform infrared (FTIR) spectroscopy, focused ion beam (FIB), thermogravimetric analysis (TGA) and differential thermal analysis (DTA). The PXRD patterns and FIB images show a partially intercalated and partially exfoliated dispersion of layered crystalline materials in the polyamide 6.6 matrix. The best dispersion level is achieved in polyamide 6.6/LDH nanocomposites with low LDH loading. Some residual tactoids and particle agglomerates are also evident at high concentration. The best thermal stability of the nanocomposites is shown by the sample with 0.1% LDH content, for which it is higher than that of pure polyamide.