Correlation between phenol structure and catalytic activity of samarium(III) phenolates in polymerization of -caprolactone: Part 2. Tertbutyl's electronic and steric effects

Six Sm(III) phenolates were firstly synthesized with un-substituted phenol (P), 2-tertbutylphenol (2B), 4-tertbutylphenol (4B), 4-methylphenol (4M), 2-tertbutyl-4-methylphenol (2B4M) and 2,6-ditertbutyl-4-methylphenol (26B4M) separately. All the phenolates were used as single component catalyst for the ring-opening polymerization (ROP) of -caprolactone (CL). The experimental results showed that, with phenols substituted by single or double tertbutyls at different sites, Sm(III) phenolates resulted in ordered variations both in their catalytic activities and in ROP characteristics. In order to find the correlation between these ordered variations and tertbutyl substituents’ electronic and steric effects, data describing phenols’ geometric and charge distribution parameters were obtained with quantum chemical (QC) calculation and discussed with experimental results in organized groups. It was found that, single tertbutyl on phenol, especially ortho one, would induce mixed electronic effect but positive steric effect, latter of which induce easier ROP under mild conditions, increased catalytic activity while more inter- and intramolecular transesterifications, resulting in PCL with wider molecular weight distribution (MWD). Two ortho tertbutyls induce not only positive steric effect but also positive electronic effect, which induce the highest catalytic activity of Sm(26B4M)₃, most transesterifications and the resultant widest MWD of PCL.     

二(芳氧基)稀土(Ⅱ)配合物催化ε-己内酯开环聚合

系统地研究了二（２，６ 二叔丁基 ４ 甲基酚基）钐［（ＡｒＯ）２Ｓｍ（ＴＨＦ）４］催化ε 己内酯的开环聚合，发现它具有很高的催化活性并显示“活性”聚合的特点，在甲苯中，当［Ｍ］／［Ｉ］＝２０００（摩尔比），６０℃，１ｈ，转化率可达９８％．并比较了不同的两价稀土化合物的催化活性．通过核磁分析末端基结构的方法，研究了（ＡｒＯ）２Ｓｍ催化己内酯开环聚合的引发机理，发现催化剂首先与己内酯反应，生成三价烯醇式稀土化合物，后者引发己内酯聚合．     

Cationic ring-opening polymerization of tetrahydrofuran with Keggin-type heteropolycompounds as solid acid catalysts

<正>Three Keggin-type heteropolyanions,namely H_3PMo_(12)O_(40)·13H_2O,(NH_4)_3PMo_(12)O_(40)·4H_2O and H_3PW_(12)O_(40)·13H_2O were prepared and tested in the ring-opening polymerization reaction of tetrahydrofuran.The effects of the counter-cation (H~+,NH_4~+) and the peripheral atoms(Mo,W) on the polymerization were investigated.It has been found that when the protons of H_3PMo_(12)O_(40)·13H_2O were replaced by the ammonium cations the polymerization rate decreased dramatically. Whereas,when the peripheral atoms(Mo) were replaced by their homologous(W),the polymerization rate increased twofold.As for the viscosity average molecular weight(M_v) of polymer products,it was found that the high molecular weight(7930) was obtained by using H_3PW_(12)O_(40)·13H_2O.The molecular weight(M_v) obtained by H_3PMo_(12)O_(40)·13H_2O and (NH_4)_3PMo_(12)O_(40)·4H_2O was 6470 and 6810,respectively.     

二(叔丁基环戊二烯基)钕甲基配合物催化ε-己内酯开环聚合

二（叔丁基环戊二烯基）钕甲基配合物催化ε 己内酯开环聚合罗云杰姚英明沈琪（苏州大学化学化工学院苏州２１５００６）关键词开环聚合，ε 己内酯，茂基稀土甲基配合物聚ε 己内酯（Ｐｏｌｙｃａｐｒｏｌａｃｔｏｎｅ，ＰＣＬ）是一种生物降解材料，有良好的相...     

Poly(ethylene‐co‐1,4‐cyclohexylenedimethylene terephthalate) copolyesters obtained by ring opening polymerization

Cyclic oligomer fractions of ethylene terephthalate c(ET)_n and 1,4‐cyclohexylenedimethylene terephthalate c(CT)_n were obtained by cyclodepolymerization of their respective polyesters, the former containing around 80 mol % of trimer and the latter with around 70 mol % of trimer to pentamer. Mixtures of these fractions at selected compositions were subjected to ring opening copolymerization to give a series of poly(ethylene‐co‐cyclohexylenedimethylene terephthalate) copolyesters with ET/CT comonomer ratios ranging from 90/10 to 10/90. The copolyesters were characterized by GPC and NMR, and their thermal properties were evaluated by DSC and TGA. They had essentially the same composition as the feed from which they were produced and had an average‐weight molecular weights between 30,000 and 40,000 g/mol with polydispersities between 2 and 2.7. The distribution of the monomeric units in these copolyesters was essentially at random although it evolved to be a blocky microstructure as the contents in the two comonomers became more dissimilar. Their thermal behavior was the expected one for these types of copolyesters with crystallinity and heating stability decreasing with the content in CT units. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5954–5966, 2009     

New organic-inorganic nanohybrids via ring opening polymerization of (di)lactones initiated by functionalized polyhedral oligomeric silsesquioxane

The synthesis of new organic-inorganic materials were investigated. Poly(ε-caprolactone) and poly(l, l-lactide) covalently end-capped by a polyhedral oligomeric silsesquioxane (POSS) moiety, leading to new nanohybrid materials, were successfully prepared by coordination-insertion ring opening polymerization (ROP) of ε-caprolactone (ε-CL) and l,l-lactide (l,l-LA) respectively. The reaction was initiated from the primary amine available on aminopropylheptakis(isobutyl)POSS nanoparticles and catalyzed by tin(II) 2-ethylhexanoate (tin octoate, Sn(oct)₂). The covalent grafting of the polyester chains onto the POSS “nanocages” was assessed by selective fractionation experiment, Fourier transform infrared spectroscopy (FTIR) and further confirmed by proton nuclear magnetic resonance (¹H NMR). The polymerization proved to be well controlled as attested by the quite narrow polydispersity indices as determined by size exclusion chromatography (SEC). Furthermore, well-defined semi-crystalline poly(ε-caprolactone)-b-polylactide block copolymer carrying such POSS nanoparticle at one end was successfully synthesized attesting for the very efficient control over the polymerization reaction.     

Synthesis and crystallization behaviors of poly(styrene-b-isoprene-b-ε-caprolactone) triblock copolymers

The triblock copolymers, poly(styrene-b-isoprene-b-ε-caprolactone)s (PS-b-PI-b-PCL) have been synthesized successfully by combination of anionic polymerization and ring-opening polymerization. Diblock copolymer capped with hydroxyl group, PS-b-PI-OH was synthesized by sequential anionic polymerization of styrene and isoprene and following end-capping reaction of EO, and then it was used as macro initiator in the ring-opening polymerization of CL. The results of DSC and WAXD show big effect of amorphous PS-b-PI on the thermal behaviors of PCL block in the triblock copolymers and the lower degree of crystalline in the triblock copolymer with higher molecular weight of PS-b-PI was observed. The real-time observation on the polarized optical microscopy shows the spherulite growth rates of PCL₂₇, PCL₃₂₈ and PS-b-PI-b-PCL₃₄₄ are 0.71, 0.46 and 0.07 μm s⁻¹, respectively. The atomic force microscopy (AFM) images of the PS₉₀-b-PI₆₆-b-PCL₂₈ show the columns morphology formed by it’s self-assembling.     

Olefin metathesis polymerization: Some recent developments in the precise polymerizations for synthesis of advanced materials (by ROMP,ADMET)

Recent results for synthesis of end-functionalized polymers (EFP) by using olefin metathesis polymerization have been introduced including basic characteristics in ring-opening metathesis polymerization (ROMP) of cyclic olefins and acyclic diene metathesis (ADMET) polymerization for synthesis of conjugated polymers. Several approaches were demonstrated for synthesis of EFP by living ROMP using molybdenum (exclusive coupling with aldehyde) and ruthenium catalysts (sacrificial ROMP, chain transfer). Cis specific (Z selective) ROMPs were achieved by molybdenum, ruthenium, and vanadium catalysts by the ligand modification. The catalytic synthesis of EFP with high cis selectivity has been achieved by combined ROMP with chain transfer by V(CHSiMe₃)(N-2,6-Cl₂C₆H₃)[OC(CF₃)₃](PMe₃)₂. The ADMET polymerization using molybdenum and ruthenium catalysts afforded defect-free, high molecular weight poly(arylene vinylene)s containing all trans olefinic double bonds. The methods for precise synthesis of EFPs, exhibiting unique optical properties combined with the end groups, were developed. The catalytic one-pot syntheses for EFPs have also been developed.     

Mechanistic study of Bu2SnCl2-mediated ring-opening polymerization of epsilon-caprolactone by multinuclear NMR spectroscopy

The ring-opening polymerization (ROP) of epsilon-caprolactone (CL) was carried out in toluene at 100 degrees C with n-propanol (nPrOH) in the presence of Bu(2)SnCl(2). It comes out that the molar mass of the polyester chains can be predicted from the initial monomer-to-alcohol molar ratio in accordance with a controlled ROP mechanism involving an O-acyl cleavage of the monomer to selectively form (alpha-propyloxy)(omega-hydroxy)poly(epsilon-caprolactone) chains. In order to gain fundamental understanding of the mechanistic factors governing the polyester chain growth, advanced (1)H, (13)C, and (119)Sn NMR investigations were performed in situ in [D(8)]toluene, as well as with model solutions that contained Bu(2)SnCl(2) and binary mixtures of the components at various concentrations and temperatures. This has enabled us to propose a mechanism in which Bu(2)SnCl(2) behaves as a catalyst, while nPrOH is the actual initiator. It involves non-aggregated, six-coordinate Bu(2)SnCl(2) complexes in which ligands exchange fast on the (119)Sn NMR observational timescale, and the simultaneous interactions of CL and alcohol function in such a way that it favors insertion/propagation reactions over transesterification ones, up to high monomer conversion.     

Bis(2‐cycloazylindolyl)titanium Complexes: Synthesis,Characterization, and the Catalytic Behaviors towards Hydroamination and Ring‐opening Polymerization of ϵ‐Caprolactone

The ligands 2‐pyrazol‐1‐yl‐1H‐indole (HL1) and 2‐ 1 , 2 , 4 ‐triazol‐1‐yl‐1H‐indole (HL2) individually reacted with Ti(NMe₂)₄ in tetrahydrofuran to form the corresponding complexes Ti(L1)₂(NMe₂)₂ ( 1 ) and Ti(L2)₂(NMe₂)₂ ( 2 ), respectively. The titanium complexes were fully characterized by NMR measurement and elemental analysis as well as the single‐crystal X‐ray diffraction of 1 and 2 . Both 1 and 2 exhibit high activities towards intermolecular hydroamination of terminal alkynes with high selectivity, and they also efficiently promote the ring‐opening polymerization of ?‐caprolactone.     

Bis(guanidinate) alkoxide complexes of lanthanides: synthesis, structures and use in immortal and stereoselective ring-opening polymerization of cyclic esters

A series of new bis(guanidinate) alkoxide Group 3 metal complexes [Ln((Me3Si)2NC(NiPr)2)2(OR)] (R=OtBu, Ln=Y, Nd, Sm, Lu; R=OiPr, Ln=Y, Nd, Lu) has been synthesized. X-ray structural determinations revealed that bis(guanidinate) tert-butoxides are monomeric complexes. The isopropoxide complex [Y((Me3Si)2NC(NiPr)2)2(OiPr)] undergoes slow decomposition in solution, to afford the unusual dimeric amido complex [(Y((Me3Si)2NC(NiPr)2)2(mu-N(iPr)C triple chemical bond N))2]. Complexes [Ln((Me3Si)2NC(NiPr)2)2(OR)] (R=OtBu, Ln=Y, Nd, Sm, Lu; R=OiPr, Ln=Y, Nd, Lu) are active catalysts/initiators for the ROP of rac-lactide and rac-beta-butyrolactone under mild conditions. Most of those polymerizations proceed with a significant degree of control. Bis(guanidinate) alkoxides appear to be well suited for achieving immortal polymerization of lactide, through the introduction of large amounts of isopropanol as a chain-transfer agent. The synthesized complexes are able to promote the stereoselective ROP of rac-beta-butyrolactone to afford syndiotactic poly(hydrobutyrate) through a chain-end control mechanism, while they are surprisingly non-stereoselective for the ROP of lactide under strictly similar conditions.     

Analysis of Polymorphism and Dual Crystalline Morphologies in Poly(hexamethylene terephthalate)

Summary: The polymorphisms in poly(hexamethylene terephthalate) (PHT), along with their associated melting and spherulite morphologies, were examined by differential scanning calorimetry (DSC), wide‐angle X‐ray diffraction (WAXD), and polarized‐light microscopy (PLM). The morphology and crystal cells were dependent on the temperature of crystallization. When melt‐crystallized at low temperatures (90–135 °C), PHT showed at least five melting peaks and two re‐crystallization peaks upon DSC scanning, and the samples displayed various fractions of both α and β crystals. However, only a single melting peak was obtained in PHT melt‐crystallized at 140 °C or above, which displayed a single type of β crystal. In addition, two different forms of spherulites were identified in melt‐crystallized PHT, with one being a typical Maltese‐cross spherulite containing the α crystal, and the other being a dendrite‐type packed mainly with the β crystal. This study provides timely evidence for a critical interpretation of the relationship between multiple melting and polymorphisms (unit cells and spherulites) in polymers, including semi‐crystalline polyesters.

WAXD diffractograms for PHT melt‐crystallized at 140 °C, revealing a single type of β‐crystal cell.     

Synthesis of trisubstituted 1,3-oxazin-6-ones via base-catalyzed ring-opening annulation of cyclopropenones with N-(pivaloyloxy)amides

The base-catalyzed [3+3]-type annulation between cyclopropenones and N-(pivaloyloxy)amides is reported. The formal insertion of a 1,3-N,O-dipole into a cyclopropenone CC bond yields a six-membered azalactone structure. In the presence of catalytic K₂CO₃ at 60?°C in THF, the disubstituted cyclopropenone couples with benzamides, acrylamides, and a phenylacetamide to produce 2,4,5-trisubstituted 1,3-oxazin-6-ones in 23–99% yield.     

Synthesis of Poly(glutamic acid-co-aspartic acid) via Combination of N-carboxyanhydride Ring Opening Polymerization with Debenzylation简

The random copolymers of glutamic acid （LG） and aspartic acid （ASP）, poly（LG-co-ASP）, with designed compositions could be successfully synthesized via combination of N-carboxyanhydride ring opening copolymerization with debenzylation. Ring opening copolymerizations of y：benzyl-L-glutamate N-carboxyanhydride （BLG-NCA） and β-benzyl-Laspartate N-carboxyanhydride （BLA-NCA） were carried out by using different amines including triethylamine （TEA）, diethylamine, n-hexylamine （NHA）, triphenylamine, diphenylamine or aniline as initiators. All the 6 amines were highly efficient to get well-defined poly（BLG-co-BLA） copolymers with designed compositions although the polymerizations proceeded via different mechanisms （normal amine mechanism or/and activated monomer mechanism）, which are based on chemical structure of amines. The molecular weights of poly（BLG-co-BLA） copolymers could be mediated by both TEA concentration and polymerization time. Then, debenzylation ofpoly（BLG-co-BLA） copolymers was conducted to prepare the corresponding hydrophilic random eopolymers of poly（LG-co-ASP） with a-subunit structure in ASP structural units. The contents of LG structural units in poly（LG-co-ASP） copolymers matched with those of BLG-NCA in NCA-monomer feeds in ring opening copolymerizations initiated by NHA or TEA and were closed to the theoretical line. The diblock copolymer of poly（BLG-b-BLA） could also be synthesized via living NCA ring opening copolymerization by sequential addition of BLG- NCA and BLA-NCA.     

Heterobimetallic aluminium and zinc complex with N-arylanilido-imine ligand: Synthesis, structure and catalytic property for ring-opening polymerization of ε-caprolactone

Treatment of a N-arylanilido-imine ligand [ortho-C₆H₄(NHAr)CHN]₂CH₂CH₂ (Ar = 2,6-Me₂C₆H₃) (LH₂) with one equiv. of AlMe₃ affords a monometallic complex [C₆H₄(NHAr)–CHN)]CH₂CH₂(C₆H₄(NAr)CHNAlMe₂) (1). The monometallic complex 1 reacts with one equiv. of ZnEt₂ to give a heterobimetallic complex [C₆H₄(NAr)–CHNZnEt]CH₂CH₂[C₆H₄(NAr)–CHNAlMe₂] (2). Both complexes were characterized by ¹H and ¹³C NMR spectroscopy and elemental analyses, and the molecular structures of 1 and 2 were determined by X-ray diffraction analysis. The complexes 1 and 2 both are efficient catalysts for ring-opening polymerization of ε-caprolactone in the presence of benzyl alcohol yielding polymers with narrow polydispersity values and complex 2 initiates the polymerization in a controllable manner.     

Cationic versus neutral Ru(II)--N-heterocyclic carbene complexes as latent precatalysts for the UV-induced ring-opening metathesis polymerization

A series of cationic and neutral Ru^II complexes of the general formula [Ru(L)(X) (tBuCN)₄]⁺X^? and [Ru(L)(X)₂(tBuCN)₃)], that is, [Ru(CF₃SO₃){NCC(CH₃)₃}₄(IMesH₂)]⁺[CF₃SO₃]^? ( 1 ), [Ru(CF₃SO₃){NCC(CH₃)₃}₄(IMes)]⁺[CF₃SO₃]^? ( 2 ), [RuCl{NCC(CH₃)₃}₄(IMes)]⁺Cl^? ( 3 ), [RuCl{NCC(CH₃)₃}₄(IMesH₂)⁺Cl^?]/[RuCl₂{NCC(CH₃)₃}₃(IMesH₂)] ( 4 ), and [Ru(NCO)₂{NCC(CH₃)₃}₃(IMesH₂)] ( 5 ) (IMes=1,3‐dimesitylimidazol‐2‐ylidene, IMesH₂=1,3‐dimesityl‐imidazolin‐2‐ylidene) have been synthesized and used as UV‐triggered precatalysts for the ring‐opening metathesis polymerization (ROMP) of different norborn‐2‐ene‐ and cis‐cyclooctene‐based monomers. The absorption maxima of complexes 1 – 5 were in the range of 245–255 nm and thus perfectly fit the emission band of the 254 nm UV source that was used for activation. Only the cationic Ru^II‐complexes based on ligands capable of forming μ²‐complexes such as 1 and 2 were found to be truly photolatent in ROMP. In contrast, complexes 3 – 5 could be activated by UV light; however, they also showed a low but significant ROMP activity in the absence of UV light. As evidenced by ¹H and ¹³C NMR spectroscopy, the structure of the polymers obtained with either 1 or 2 are similar to those found in the corresponding polymers prepared by the action of [Ru(CF₃SO₃)₂(IMesH₂)(CH‐2‐(2‐PrO)‐C₆H₄)], which strongly suggest the formation of Ru‐based Grubbs‐type initiators in the course of the UV‐based activation process. Precatalysts that have the IMesH₂ ligand showed significantly enhanced reactivity as compared with those based on the IMes ligand, which is in accordance with reports on the superior reactivity of IMesH₂‐based Grubbs‐type catalysts compared with IMes‐based systems.     

Hydroxyl end-capped macromers of N-vinyl-2-pyrrolidinone as precursors of amphiphilic block copolymers

Telechelic N-vinyl-2-pyrrolidinone (NVP) oligomers terminated by hydroxyl groups were prepared by radical polymerization in the presence of functional chain transfer agents. Then hydroxy-terminated poly(NVP) was used as initiator in the ring opening polymerization of ε-caprolactone (ε-CL). Experiments were performed either under basic conditions or by using SnOct₂ or ZnEt₂ as catalyst. The resulting amphiphilic AB-type block copolymers were thoroughly characterized by spectroscopic and thermal techniques. These data and fractionation in protic solvents indicated that the copolymerization products are constituted by a mixture of copolymers with a wide composition range. The water-soluble copolymer fractions formed micelles and nanoaggregates that showed an appreciable capacity of loading piroxicam, a hydrophobic non-steroidal anti-inflammatory drug. Contact angle measurements, atomic force microscopy, and surface plasmon resonance measurements indicated that the surface of films prepared from the insoluble fractions does not have antiopsonizing properties in spite of their high hydrophilicity.