Click synthesis by Diels-Alder reaction and characterisation of hydroxypropyl methylcellulose-based hydrogels

The Diels-Alder reaction was used to fabricate hydroxypropyl methylcellulose-based hydrogels. First, hydroxypropylmethylcellulose (HPMC) was modified by a carboxyl-containing diene molecule (SFA) which was synthesised from furfurylamine and succinic anhydride. Second, dienophile groups were introduced into HPMC by the coupling reaction with N-maleoyl alanine (AMI) using N,N′-dicyclohexylcarbodiimide (DCC) and 4-dimethylaminopyridine (DMAP). Subsequently, the asprepared furan- and maleimide-modified HPMC were dissolved in water and gelation was observed at a pre-determined temperature after a period of time. The samples thus obtained were characterised by FTIR, NMR, SEM, etc. The gelation time changing with temperature, concentration of the solution, and solvent was measured. It was found that gelation time decreased with increasing temperature and concentration of the solution, and that water had a rate-accelerating effect on Diels-Alder reaction. The swelling behaviour indicates that the hydrogels have a high swelling ratio in water and the swelling ratio increases with the increasing temperature. Taking into consideration that the HPMC-based hydrogels are prepared under mild reaction conditions with an adjustable gelation time and thermal stability, the method described here has a potential application in biomaterials, especially in the areas of tissue-engineering and drug-controlled release carriers.     

Radiation synthesis and characterization of poly(N,N-dimethylaminoethyl methacrylate-co-N-vinyl 2-pyrrolidone) hydrogels

In this study, radiation synthesis and characterization of swelling behavior and network structure of poly(N,N-dimethylaminoethyl methacrylate) (PDMAEMA), and poly(N,N-dimethylaminoethyl methacrylate-co-N-vinyl 2-pyrrolidone) (P(DMAEMA-co-VP)), hydrogels were investigated. PDMAEMA and P(DMAEMA-co-VP) hydrogels in the rod forms were prepared by irradiating the ternary mixtures of DMAEMA/VP/cross-linking agent, ethyleneglycol dimethacrylate (EGDMA), by gamma rays at ambient temperature. In composition ranges where the three components were completely miscible, water was also added to the ternary mixture to provide the formation of homogeneous polymerization and gelation. The influence of irradiation dose, comonomer, VP, and cross-linking agent, EGDMA, content on the total percentage gelation and monomer conversion were investigated. The effect of pH and temperature on the swelling behavior of hydrogels have also been examined. Hydrogels showed typical pH response and temperature responses, such as low-pH and low temperature swelling and high-pH and high temperature deswelling. Polymer-solvent interaction parameter (χ) and enthalpy and entropy changes appearing in the χ parameter for the P(DMAEMA-co-VP)-water system were determined by using Flory-Rehner theory of swelling equilibrium. The negative values for ΔH and ΔS indicate that prepared pure PDMAEMA and P(DMAEMA-co-VP) hydrogels have lower critical solution temperature (LCST) and Flory-Rehner theory of swelling equilibrium provides a satisfactory agreement to the experimental swelling data of the hydrogels.     

Synthesis and network structure of ionic poly(N,N-dimethylacrylamide-co-acrylamide) hydrogels: Comparison of swelling degree with theory

At four different charge densities, ionic hydrogels based on N,N-dimethylacrylamide (DMAAm), acrylamide (AAm), and itaconic acid (IA) were synthesized by free-radical cross-linking copolymerization in water with N,N-methylenebis(acrylamide) (BAAm) as the cross-linker, ammonium persulfate (APS) as the initiator, and N,N,N′,N′-tetramethylenediamine (TEMED) as the activator. The swelling behaviors of these hydrogels were analyzed in buffer solutions at various pH. It was observed that the swelling behavior of cross-linked ionic poly(N,N-dimethylacrylamide-co-acrylamide) [P(DMAAm-co-AAm)] hydrogels at different pHs agreed with the modified Flory-Rehner equation based both on the phantom network and affine network models and the ideal Donnan theory. In addition, the kinetics of swelling of the hydrogels was studied in pH 2, 5 and 9 buffer solutions. The swelling curves exhibited the characteristic features of transport process, apparently the Fickian diffusion of fast rates.     

Synthesis of fast-swelling superabsorbent hydrogels: effect of crosslinker type and concentration on porosity and absorption rate

Fast-swelling highly porous superabsorbent hydrogels were synthesized through a rapid solution polymerization of concentrated partially neutralized acrylic acid under normal atmospheric conditions. Acetone and sodium bicarbonate were used as porosity generators (porogens) during polymerization process for porosity generation. N,N^′-methylenebisacrylamide (MBA) and 1,4-butanedioldiacrylate were used as the water- and the oil-soluble crosslinkers, respectively. The temperature changing of the reaction mixture during polymerization and foam formation process was monitored and investigated in details. Time and sequence of addition of the porogens and gelation time were recognized to be important to increase efficiency of the porogens. The concentration of the crosslinkers on gelation time was optimized to achieve highly porous products. It was found that higher crosslinker concentration, especially in the case of MBA, causes decreased gelation times. Shorter gelation time resulted in more porogen bubbles trapped in the viscose reaction mixture led to products with higher porosity. The effect of type and concentration of the crosslinking agents on the process and swelling behavior of the hydrogels (in water and saline solutions) were investigated. Power law relationships were found for the variation of swelling in terms of either crosslinker or saline concentration. Less sensitivity to the change of salinity was achieved by employing higher amount of crosslinker.     

Swelling and water transport in temperature-sensitive hydrogels based on 2-methoxyethylacrylate

A series of thermoresponsive hydrogels based on copolymers of 2-methoxyethylacrylate with acrylamide or N,N-dimethylacrylamide were prepared by radiation-induced polymerization in dimethylformamide solution in the presence of a crosslinking agent. The swelling behaviour of the hydrogels was studied by immersing the polymer samples in water at 5°C, 10°C and 37°C. The data were found to satisfactorily fit Fick's law with a constant diffusion coefficient. The results indicate that the swelling ratio increases with increasing the content of the hydrophilic monomers in the hydrogels and at the same time the equilibrium swelling time decreases. The effect of temperature on water transport mechanism was observed.     

Insulin release behavior of poly(N-isopropylacrylamide-co-N-vinyl-2-pyrrolidone) hydrogel based on modified melamine crosslinkers

Novel hydrogels based on poly(N-isopropylacrylamide-co-N-vinyl-2-pyrrolidone) (PNIPAAm/PNVP), were synthesized by solution radical polymerization using water as solvent and different weight percentage of crosslinkers ranging from 0.5 to 4%. The monomer mol ratios of NIPAAm/VP (0.9/0.1, 0.5/0.5, and 0.1/0.9) were used in all cases. N,N′-methylenebisacrylamide (MBA) and the new synthesized N,N,N-triacrylamido melamine (MAAm) were used as crosslinkers. The swelling parameters such as the swelling ratio Q, equilibrium water content (EWC), volume fraction of polymer φ_p and volume fraction at crosslinking φ_r were calculated from swelling measurements at different temperatures. The lower critical solution temperatures (LCST) of the prepared hydrogels were measured using DSC technique. The data of LCST indicated that the NIPAAm/VP crosslinked with MAAm or MBA showed reversible swelling and shrinking with temperature changes. The temperature dependence of swelling ratio and response kinetics upon heating or cooling was also investigated to understand the smart properties, i.e., temperature sensitive properties of these smart hydrogels. The in vitro release experiments were carried out at 22 and 37°C, respectively, to investigate the effect of temperature-sensitive property of these PNIPAAm/PNVP hydrogels crosslinked with MAAm and MBA crosslinkers on insulin release profiles.     

Hetero Diels-Alder reaction: a novel strategy to regioselective synthesis of pyrimido[4,5-d]pyrimidine analogues from Biginelli derivative

A number of potent pyrimido[4,5-d]pyrimidine analogues have been efficiently synthesized by hetero Diels-Alder cycloaddition of 6-methyl-4-phenyl-2-thioxo-1,2,3,4-tetrahydropyrimidine-5-carboxylic acid methyl ester, a Biginelli compound with N-arylidine-N′-methylformamidines and N-arylidine guanidine in dry toluene. Structures of the newly obtained cycloadducts were established on the basis of elemental and spectral (IR, NMR and Mass) data. The molecular mechanism of the observed cycloaddition reaction has been investigated theoretically by means of PM3 semiempirical method. Transition state structure determinations and activation energy calculations have shown the preference for the endo approach over the exo approach of dienophile towards the diene fragments used, which is consistent with the experimental results. The studied cycloadditions proceed via an asynchronous concerted mechanism. It was demonstrated that FMO theory could reasonably predict the relative reactivities between dienes as well as indicating that these reactions belong to normal Diels-Alder type cycloadditions.     

Effects of synthesis-solvent on swelling and elastic properties of poly(N-isopropylacrylamide) hydrogels

Thermosensitive N-isopropylacrylamide (NIPA) hydrogels were synthesized by a free radical copolymerization with N,N′-methylenebisacrylamide (MBAA) in four solvents: water, ethanol, acetone and N,N-dimethylformamide. The swelling and elastic properties of the hydrogels were affected by the synthesis-solvents; the hydrogels (e.g. NIPA/MBAA = 1000/50 mol/m³-pre-gel solution) synthesized in water have smaller swelling volume and larger shear modulus at 10 °C than those synthesized in amphiphilic solvents. The network structure of hydrogels was estimated in terms of the conversion and two sorts of effective crosslinking density based on the Flory theory and the concentration of crosslinker. The hydrogels synthesized in water can have the microscopic inhomogeneous network arising from the entanglement of polymer chains, while the hydrogels synthesized in amphiphilic solvents can have the homogeneous network arising from the polymer concentration lower than the pre-gel solution and can be similar in network structure to the lightly crosslinked hydrogel synthesized in water.     

Rapid swelling and deswelling in cryogels of crosslinked poly(N-isopropylacrylamide-co-acrylic acid)

Thermally sensitive hydrogels of poly[N-isopropylacrylamide (NIPA)-co-acrylic acid (AA)] hydrogels with N,N-methylene bisacrylamide (BIS) as crosslinker have been synthesized via a two-step procedure in which, the initial polymerisation is conducted for various times at 18 °C, this step being followed by polymerisation for one fixed time at −22 °C. The gravimetrically determined rates of swelling/deswelling for these materials termed “cryogels” prepared by this two-step polymerisation are much higher than those for the same type of hydrogel prepared via conventional methods (30 °C for 24 h). For example the time for the former xerogel to take up 70% of its final water content at 25 °C is just 18 min, compared with a time 300 min for the latter to attain the same uptake of water. During deswelling (shrinking) at 50 °C, which is above the lower critical temperature, the hydrogel loses 60 and 90 wt% water in 1 and 10 min respectively, compared to a timescale for the corresponding crosslinked copolymers prepared by conventional methods of about 100 min for 50 wt% water loss. A third type of hydrogel was made by a cold treatment (CT), for which the hydrogel prepared by conventional polymerization was stored in the frozen state. The swelling rate of these CT xerogels was the same as that for xerogels prepared by conventional polymerization, but the deswelling rate of the former was higher than that of the latter; for example, during deswelling, a loss of 90% water is attained within a few minutes.Scanning electron microscopy, digital photographs and flotation experiments together with swelling ratio studies reveal that the polymeric network of cryogel produced by the two-step polymerization method is characterized by an open structure with more pores and higher swelling ratio but lower mechanical strength compared to the conventional hydrogels. Such rapid response hydrogels have potential applications in separation and drug release technologies for example.     

Synthesis, characterisation and evaluation of poly[lactose acrylate-N-vinyl-2-pyrrolidinone] hydrogels for drug delivery

New biodegradable polymeric hydrogels based on biocompatible materials, lactose acrylate (LA) and N-vinyl-2-pyrrolidinone were designed and synthesized. LA was synthesized and characterized by Fourier transform infrared spectroscopy and proton nuclear magnetic resonance spectroscopy. Hydrogel synthesis was carried out by free-radical polymerization of the co-monomers using azobisisobutyronitrile as initiator and N,N^′-methylenebisacrylamide as crosslinker. These hydrogels were also characterized. Equilibrium swelling of the hydrogels was studied in phosphate buffer of physiological pH, 7.4 and at 37 °C. Propranolol hydrochloride was entrapped into these hydrogels and the in vitro release profile of this drug was established in phosphate buffer. The drug release followed a near zero-order fashion in the first 6 h and thereafter slowed down releasing more than 90% of the entrapped drug at the end of 48 h.     

Studies of sodium humate/polyacrylamide/clay hybrid hydrogels. I. Swelling and rheological properties of hydrogels

A type of novel hybrid hydrogels from sodium humate (SH), polyacrylamide (PAM), and hydrophilic Laponite clay were prepared using potassium persulfate (KPS) as the initiator and N,N′-methylenebisacrylamide (MBA) as the cross-linker. The structures of the hydrogels were characterized by field emission scanning electron microscope and FTIR. Their swelling properties, swelling mechanism and rheological properties were also investigated. Experiments show that the composite is heterogeneous in the PAM/SH hydrogel system, while the clay collaborates with SH and improves the network structure of PAM/SH/clay hydrogel. High water-absorbing capability is shown for both hydrogel systems. Han plot proves that clay and SH are compatible with PAM for PAM/SH/clay hydrogels.     

Studies on copolymerization of N-isopropylacrylamide with poly(ethylene glycol) methacrylate

The paper describes the preparation and characterization of cross-linked homopolymers and copolymers of N-isopropyl acrylamide (NIPAAm) with poly(ethylene glycol) methacrylate (PEGMA, M_n = 526 g/mol). Several copolymer samples were prepared by taking varying amounts of monomers i.e. NIPAAm and PEGMA in the initial feed using hydrophilic (IRGACURE-2959) and hydrophobic (DURACURE-1173) photoinitiator. In order to investigate the effect of reaction conditions, copolymers were prepared below or above the lower critical solution temperature (LCST) using water or water:ethanol (50:50) as solvent and by varying the amounts of cross-linker. Hydrogels prepared under varying reaction conditions were characterized for its swelling behaviour (using optical microscope), phase transition temperature (using DSC) and morphology (using SEM). As expected LCST increased from 35 to 39 °C as PEGMA content in copolymers increased from 1 to 20% (w/w). However, the morphology of hydrogels was found to be independent on the reaction conditions.Copolymer films having an optimum combination of swelling and performance properties were evaluated as switchable cell culture membranes. Hepatic cancer cell lines (Hep G-2) was used to study the cell growth and detachment. Cell growth and detachment were found to be dependent on the copolymer composition. Cell viability was found comparable to trypsin which also supports application of these films as cell culture membrane.     

Rapid swelling and deswelling in cryogels of crosslinked poly(N-isopropylacrylamide-co-acrylic)

Thermally sensitive hydrogels of poly[N-isopropylacrylamide (NIPA)-co-acrylic(AA)] hydrogels with N,N-methylene bisacrylamide (BIS) as crosslinker have been synthesised via a two-step procedure in which, the initial polymerisation is conducted for various times at 18 °C, this step being followed by polymerisation for one fixed time at −22 °C. The gravimetrically determined rates of swelling/deswelling for these materials termed “cryogels” prepared by this two-step polymerisation are much higher than those for the same type of hydrogel prepared via conventional methods (30 °C for 24 h). For example the time for the former xerogel to take up 70% of its final water content at 25 °C is just 18 min, compared with a time 300 min for the latter to attain the same uptake of water. During deswelling (shrinking) at 50 °C, which is above the lower critical temperature, the hydrogel loses 60 and 90 wt.% water in 1 and 10 min respectively, compared to a timescale for the corresponding crosslinked copolymers prepared by conventional methods of about 100 min for 50 wt.% water loss. A third type of hydrogel was made by a cold treatment (CT), for which the hydrogel prepared by conventional polymerisation was stored in the frozen state. The swelling rate of these CT xerogels was the same as that for xerogels prepared by conventional polymerisation, but the deswelling rate of the former was higher than that of the latter; for example, during deswelling, a loss of 90% water is attained within a few minutes.Scanning electron microscopy, digital photographs and flotation experiments together with swelling ratio studies reveal that the polymeric network of cryogel produced by the two-step polymerisation method is characterised by an open structure with more pores and higher swelling ratio but lower mechanical strength compared to the conventional hydrogels. The polymerisation was taking place on moderate freezing condition and the hydrogel was stored in a frozen state and subsequent thawing of polymer to be very useful the acceleration the response rate of this kind hydrogels. Such rapid response hydrogels have potential applications in separation and drug release technologies for example.     

Swelling behavior of strong polyelectrolyte poly(N-t-butylacrylamide-co-acrylamide) hydrogels

Temperature-sensitive ionic hydrogels based on N-t-butylacrylamide (TBA), acrylamide (AAm), 2-acrylamido-2-methylpropane sulfonic acid sodium salt (AMPS) and N,N^′-methylenebis(acrylamide) (BAAm) monomers were prepared. The molar ratio of TBA to the monomers AAm and AMPS was fixed at 60/40, while the AMPS content of the hydrogels was varied. The elastic modulus of the hydrogels was in the range of 347-447 Pa, much lower than the modulus of PAAm or poly(N-isopropylacrylamide) hydrogels due to the reduced crosslinking efficiency of BAAm in TBA/AAm copolymerization. The hydrogels exhibited swelling-deswelling transition in water depending on the temperature. Increasing ionic group (AMPS) content resulted in shifting of the transition temperature interval in which the deswelling takes place. The higher the ionic group content, the broader the temperature interval at the phase transition. Ionic hydrogels exhibited first-order reentrant conformational transitions in ethanol-water and in dimethylsulfoxide (DMSO)-water mixtures. The higher the ionic group content of the hydrogels the narrower the ethanol (or DMSO) range in which the reentrant phenomena occur. By taking into account the difference of the solvent mixture composition inside and outside the gel, the equilibrium swelling theory provided a satisfactory agreement to the experimental swelling data of the hydrogels immersed in the solvent mixtures.     

New Grafted Copolymers Carrying Betaine Units Based on Gellan and N-Vinylimidazole as Precursors for Design of Drug Delivery Systems

New grafted copolymers possessing structural units of 1-vinyl-3-(1-carboxymethyl) imidazolium betaine were obtained by graft copolymerization of N-vinylimidazole onto gellan gum followed by the polymer-analogous reactions on grafted polymer with the highest grafting percentage using sodium chloroacetate as the betainization agent. The grafted copolymers were prepared using ammonium persulfate/N,N,N′,N′ tetramethylethylenediamine in a nitrogen atmosphere. The grafting reaction conditions were optimized by changing one of the following reaction parameters: initiator concentration, monomer concentration, polymer concentration, reaction time or temperature, while the other parameters remained constant. The highest grafting yield was obtained under the following reaction conditions: c_i = 0.08 mol/L, c_m = 0.8 mol/L, c_p = 8 g/L, t_r = 4 h and T = 50 °C. The kinetics of the graft copolymerization of N-vinylimidazole onto gellan was discussed and a suitable reaction mechanism was proposed. The evidence of the grafting reaction was confirmed through FTIR spectroscopy, X-ray diffraction, ¹H-NMR spectroscopy and scanning electron microscopy. The grafted copolymer with betaine structure was obtained by a nucleophilic substitution reaction where the betainization agent was sodium chloroacetate. Preliminary results prove the ability of the grafted copolymers to bind amphoteric drugs (cefotaxime) and, therefore, the possibility of developing the new sustained drug release systems.     

Synthesis and characterization of poly(methacrylic acid) hydrogels for metoclopramide delivery

Polymeric hydrogels based on biocompatible materials, methacrylic acid (MAA), were designed and synthesized. Synthesis was carried out by free-radical copolymerization using potassium persulfate as initiator and N,N^′-methylenebisacrylamide as crosslinker. Hydrogels were also characterized by Fourier transform infrared spectroscopy (FTIR), proton nuclear magnetic resonance spectroscopy (¹H NMR) and differential scanning calorimetry (DSC). DSC was used for the quantitive determination of the amounts of freezing and non-freezing water of the hydrogels with 0.5% of N,N^′-methylenebisacrylamide. Equilibrium swelling of hydrogels was studied in phosphate buffer of physiological pH (1.0, 4.0, 7.4 and 8.5) at 37 °C. The swelling kinetic of the hydrogels were studied and the kinetic characteristic constant of copolymeric systems, k, and the exponent which characterizes the mechanism of water transport at short times, n, were obtained. Metoclopramide hydrochloride was entrapped into the hydrogels by sorption and the “in vitro” release profile of this drug was established in simulated gastric fluid (SGF) and simulated intestinal fluid (SIF). It was observed that the drug release mechanism was non-Fickian.     

A rapid access to indolo[2,1-a]pyrrolo[4′,3′:4,5]pyrano[5,6-c]coumarin/[6,5-c]chromone derivatives by domino Knoevenagal intramolecular hetero Diels-Alder reactions

Knoevenagal condensation of indole-2-carbaldehyde containing an internal dienophile with coumarins, followed by domino intramolecular hetero Diels-Alder reaction, provides polycyclic heterocycles. Different approaches for stereo- and chemoselective synthesis of indolo[2,1-a]pyrrolo[4′,3′:4,5]pyrano[5,6-c]coumarin and indolo[2,1-a]pyrrolo[4′,3′:4,5]pyrano[6,5-c]chromone derivatives are described.     

A novel and facile stereocontrolled synthetic method for polyhydro-quinolines and pyridopyridazines via a diene-transmissive Diels-Alder reaction involving inverse electron-demand hetero Diels-Alder cycloaddition of cross-conjugated azatrienes

Cross-conjugated azatrienes bearing an electron-withdrawing sulfonyl or benzoyl group on the nitrogen atom underwent, on heating or in the presence of a Lewis acid (TMSOTf), an initial inverse electron-demand hetero Diels-Alder reaction with electron-rich dienophiles (vinyl ether, vinyl thioether, and allenyl ether) to produce 1:1 cycloadducts with high endo selectivity. The initial cycloadducts thus obtained underwent a second Diels-Alder reaction stereoselectively on the newly formed diene unit with electron-deficient dienophiles to give the crossed bis-cycloadducts, octahydroquinolines, with high diastereo-π-facial selectivity. The N-sulfonylazatrienes tethering an ortho-cinnamyloxyphenyl dienophile at the triene terminal underwent an initial intramolecular hetero Diels-Alder reaction of the inverse electron-demand type. The subsequent second Diels-Alder reaction of the formed mono-cycloadducts completed the diene-transmissive hetero Diels-Alder protocol to give benzopyrano[3,4-c]quinolines in a highly stereoselective manner.     

Thermo- and pH-sensitive comb-type grafted poly(N,N-diethylacrylamide-co-acrylic acid) hydrogels with rapid response behaviors

Poly(N,N-diethylacrylamide) with a terminal hydroxyl end group (PDEA-OH) was synthesized by radical telomerization of N,N-diethylacrylamide (DEA) monomer using 2-hydroxyethanethiol as a chain transfer agent. Macromonomer of thermo-sensitive PDEA was synthesized by condensation reaction of PDEA-OH with acryloyl chloride. The macromonomer was characterized by FTIR and ¹H NMR, and the molecular weight was determined by GPC. Thermo- and pH-sensitive comb-type grafted poly(N,N-diethylacrylamide-co-acrylic acid) (PDEA-co-AA) hydrogels (GHs) were successfully prepared by grafting PDEA chains with freely mobile ends onto the backbone of a cross-linked (PDEA-co-AA) network. The results showed that the deswelling behavior of the hydrogels was dependent on the test temperature. At 45 °C (beneath the VPTT of the hydrogels), both the normal-type hydrogels (NHs) and comb-type grafted P(DEA-co-AA) hydrogels had lower deswelling rates. While at 60 °C (far beyond the VPTT of the hydrogels), the deswelling rates of the GHs were faster than that of the NHs. Furthermore, pulsatile stimuli-responsive studies indicated that the GHs had excellent thermo-reversibility and were superior to the NHs in the magnitude of their swelling ratios to temperature changes. However, the reversibility to pH changes was poor for both the NHs and the GHs.     

Poly(1,3,4-oxadiazole-ether-imide)s and their polydimethylsiloxane-containing copolymers

Poly(1,3,4-oxadiazole-ether-imide)s were prepared by thermal imidization of poly(amic-acid) intermediates resulting from the solution polycondensation reaction of a bis(ether-anhydride), namely 2,2′-bis-[(3,4-dicarboxyphenoxy)phenyl]-1,4-phenylenediisopropylidene dianhydride, with different aromatic diamines containing 1,3,4-oxadiazole ring, such as 2,5-bis(p-aminophenyl)-1,3,4-oxadiazole, 2,5-bis[p-(4-aminophenoxy)phenyl]-1,3,4-oxadiazole, 2-(4-dimethylaminophenyl)-5-(3,5-diaminophenyl)-1,3,4-oxadiazole. Poly(1,3,4-oxadiazole-ether-imide)-polydimethylsiloxane copolymers were prepared by polycondensation reaction of the same bis(ether-anhydride) with equimolar quantities of an aromatic diamine having 1,3,4-oxadiazole ring and a bis(aminopropyl)polydimethylsiloxane oligomer of controlled molecular weight. A solution imidization procedure was used to convert quantitatively the poly(amic-acid) intermediates to the corresponding polyimides. All the polymers were easily soluble in polar organic solvents such as N-methylpyrrolidone and N,N-dimethylacetamide. The polymers showed good thermal stability with decomposition temperature being above 400 °C. Solutions of some polymers in N-methylpyrrolidone exhibited blue fluorescence, having maximum emission wavelength in the range of 370-412 nm.