Axisymmetric convection flow of fractional Maxwell fluid past a vertical cylinder with velocity slip and temperature jump

A novel finite volume method is developed to investigate the axisymmetric convection flow and heat transfer of fractional viscoelastic fluid past a vertical cylinder. Fractional cylindrical governing equations are formulated by fractional Maxwell model and generalized Fourier's law. The velocity slip and temperature jump boundary conditions are considered across the fluid-solid interface. Numerical results are validated by exact solutions of special case with source terms. The effects of fractional derivative parameter and boundary condition parameters on flow and heat transfer characteristics are discussed. The viscoelastic fluid performs evident shear thickening property in the fractional Maxwell constitutive relation. Moreover, the boundary condition parameters have remarkable influence on velocity and temperature distributions.     

Heat Transfer Performance Of Viscoelastic-Fluid-Based Nanofluid Pipe Flow At Entrance Region

Heat transfer performances of viscoelastic fluid, water-based Cu nanofluid, and viscoelastic-fluid-based Cu nanofluid flows in a circular pipe at a Peclet number of 40,000 were experimentally studied. It indicates that the viscoelastic fluid turbulent flow gives great heat transfer reduction, while the water-based Cu nanofluid flow shows significant heat transfer enhancement. The viscoelastic-fluid-based Cu nanofluid also exhibits heat transfer enhancement as compared with viscoelastic base fluid flow. The effects of nanoparticle volume fraction, mass concentration of viscoelastic base fluid, and temperature on local convective heat transfer coefficient and possible heat transfer enhancement mechanisms of nanofluid flows were discussed.     

Effect of slip boundary condition on flow and heat transfer of a double fractional Maxwell fluid

The purpose of the present paper is to investigate the flow and heat transfer of a double fractional Maxwell fluid with a second order slip model. The fractional governing equations are solved numerically by using the finite difference method. By comparing the analytical solutions of special boundary conditions, the validity of the present numerical method is examined. The effects of the two slip parameters and the fractional parameters on the velocity and temperature distribution are presented graphically and discussed. The results reveal that the fractional Maxwell fluid exhibits a stronger viscosity or elasticity for different fractional parameters, and the oscillation phenomenon will gradually decrease as expected with an increase in slip parameters.     

Modern development on the features of magnetic field and heat sink/source in Maxwell nanofluid subject to convective heat transport

Nanofluids are forthcoming new generation heat transfer fluids, which have been scrutinized precisely, in current years. Thermophysical assets of these fluids have noteworthy impact on their heat transfer features. In this current investigation a mathematical relation for two dimensional (2D) flow of magnetite Maxwell nanofluid influenced by a stretched cylinder is established. To visualize the stimulus of Brownian moment and thermophoresis phenomena on Maxwell fluid Buongiorno's relation has been considered. Moreover, heat sink/source and convective condition are also presented for heat transport mechanism. The homotopic scheme has been developed for the solutions of nonlinear ordinary differential equations (ODEs). The achieved outcomes are planned and consulted in aspects for somatic parameters. It is noteworthy that the velocity of Maxwell fluid display conflicting performance for curvature parameter and Deborah number. It is also reported that the liquid velocity decays for magnetic parameter, whereas the nanoliquid temperature and concentration field enhance for magnetic parameter. Furthermore, the liquid temperature intensifies for the progressive values of thermophoresis parameter and Brownian motion. Additionally, endorsement of current significances is organized via benchmarking with earlier famous limiting situations and we pledge a marvelous communication with these outcomes.     

Study of graphene Maxwell nanofluid flow past a linearly stretched sheet: A numerical and statistical approach

This study aims to unfold the significance of numerous physical parameters such as magnetic field, heat absorption, thermal radiation, viscous and Joule dissipations, etc. on the flow of graphene Maxwell nanofluid over a linearly stretched sheet with considerations of momentum and thermal slip conditions. The prevailing mathematical equations are reformed into extremely nonlinear coupled ordinary differential equations (ODE) utilizing similarity variables and then the equations are solved numerically by the scheme of Runge-Kutta Fehlberg method along with the shooting technique. The variations in graphene Maxwell nanofluid velocity and temperature owing to different physical parameters are shown via numerous graphs whereas numerical values of skin friction coefficients and Nusselt numbers are illustrated and reported in different tables. In addition, statistical approach is followed for the multiple regression estimation analysis on the numerical findings of wall velocity gradient and local Nusselt number and are reported in tabular form to demonstrate the relationship among the heat transfer rate and physical parameters. Our results reveal that the graphene Maxwell nanofluid velocity gets reduced owing to enhancement in magnetic field, angle of inclination of magnetic field, porosity and unsteadiness parameters whereas behavior of nanofluid velocity is reversed due to Maxwell parameter. Further, it is noticed that the heat transfer rate of nanofluid is augmented owing to heat absorption, radiation and thermal slip parameters while it is reduced due to increase in viscous dissipation and unsteadiness parameters. The numerical results of the paper are validated by making comparisons with the earlier published paper under the restricted conditions and we found an excellent agreement with those results. A careful review of research papers reported in literature reveals that none of the authors has attempted this problem earlier although the thoughts and methodology explained in this paper can be anticipated to lead to enormously prolific connections across disciplines.     

MHD Maxwell flow modeled by fractional derivatives with chemical reaction and thermal radiation

Heat transfer in a time-dependent flow of incompressible viscoelastic Maxwell fluid induced by a stretching surface has been investigated under the effects of heat radiation and chemical reaction. The magnetic field is applied perpendicular to the direction of flow. Velocity, temperature, and concentration are functions of z and t for the modeled boundary-layer flow problem. To have a hereditary effect, the time-fractional Caputo derivative is incorporated. The pressure gradient is assumed to be zero. The governing equations are non-linear, coupled and Boussinesq approximation is assumed for the formulation of the momentum equation. To solve the derived model numerically, the spatial variables are discretized by employing the finite element method and the Caputo-time derivatives are approximated using finite difference approximations. It reveals that the fractional derivative strengthens the flow field. We also observe that the magnetic field and relaxation time suppress the velocity. The lower Reynolds number enhances the viscosity and thus motion weakens slowly. The velocity initially decreases with increasing unsteadiness parameter δ. Temperature is an increasing function of heat radiation parameter but a decreasing one for the volumetric heat absorption parameter. The increasing value of the chemical reaction parameter decreases concentration. The Prandtl and Schmidt numbers adversely affect the temperature and concentration profiles respectively. The fractional parameter changes completely the velocity profiles. The Maxwell fluids modeled by the fractional differential equations flow faster than the ordinary fluid at small values of the time t but become slower for large values of the time t.     

Free convection flow of nanofluid over infinite vertical plate with damped thermal flux

In this article, the unsteady free convection flow and heat transfer of nanofluid past over an infinite vertical plate is considered. The fractional generalized Fourier's law with Caputo time derivatives with power-law model to describe the influence of memory on the nanofluid behavior. The analytical solutions for dimensionless temperature and velocity fields and dimensionless thermal flux are obtained by means of Laplace transformation. The fluid is water based nanofluid containing nanoparticles of CuO or Ag. The effects of fractional and physical parameters are discussed graphically.     

Lattice Boltzmann simulation for hydrothermal analysis of free convection within dumbbell-shaped heat exchanger

The lattice Boltzmann simulation of nanofluid flow and heat transfer during natural convection within a dumbbell-shaped heat exchanger is carried out. The heat exchanger is filled with CuO–water. The KKL model is employed to predict the thermo-physical properties of nanofluid. In order to perform a comprehensive hydrothermal investigation, different post-processing approaches such as heatline visualization, total entropy generation, local entropy generation based on local fluid friction irreversibility and heat transfer irreversibility, average and local Nusselt variation are employed. In the present investigation, it is tried to present the impact of different influential parameters like Rayleigh number, solid volume fraction of nanofluid and thermal arrangement of internal fins-bodies on the fluid flow, heat transfer rate and entropy generation.     

Physics and mechanics of heat exchange processes in nanofluid flows

Nanofluids present a new type of dispersed fluids consisting of a carrier fluid and solid nanoparticles. Unusual properties of nanofluids, particularly high thermal conductivity, make them eminently suitable for many thermophysical applications, e.g., for cooling of equipment, designing of new heat energy transportation and production systems and so on. This requires a systematic study of heat exchange properties of nanofluids. The present paper contains the measurement results for the heat transfer coefficient of the laminar and turbulent flow of nanofluids on the basis of distilled water with silica, alumina and copper oxide particles in a minichannel with circular cross section. The maximum volume concentration of particles did not exceed 2%. The dependence of the heat transfer coefficient on the concentration and size of nanoparticles was studied. It is shown that the use of nanofluids allows a significant increase in the heat transfer coefficient as compared to that for water. However, the obtained result strongly depends on the regime of flow. The excess of the heat transfer coefficient in the laminar flow is only due to an increase in the thermal conductivity coefficient of nanofluid, while in the turbulent flow the obtained effect is due to the ratio between the viscosity and thermal conductivity of nanofluid. The viscosity and thermal conductivity of nanofluids depend on the volume concentration of nanoparticles as well as on their size and material and are not described by classical theories. That is why the literature data are diverse and contradictory; they do not actually take into account the influence of the mentioned factors (size and material of nanoparticles). It has been shown experimentally and by a molecular dynamics method that the nanofluid viscosity increases while the thermal conductivity decreases with the decreasing dispersed particle size. It is found experimentally for the first time that the nanofluid viscosity coefficient depends on the particle material. The higher is the density of particles, the higher is the thermal conductivity coefficient of nanofluid.     

Natural convective heat transfer of Ag-water nanofluid flow inside enclosure with center heater and bottom heat source

A numerical study on natural convective heat transfer inside an enclosure with center heater using nanofluid has been carried out. The effect of different length of center heater on the flow and temperature fields is analysed for different Rayleigh numbers. Results are displayed in terms of streamlines, isotherms, mid height velocity profile and average Nusselt number. The numerical results reveal heat transfer increases with increasing heater length at both vertical and horizontal positions for increasing values of Rayleigh numbers. In particular, a higher increase in heat transfer is obtained with heater situated with vertical position of maximum length. Also it is obtained that enhancement of heat transfer is high for Ag - water nanofluid than CuO -water and Al₂O₃ -water nanofluids.     

纳米流体应用于强化传热的研究进展及面临的挑战

纳米流体是近年来新兴的一种强化传热工质,其在强化传热领域有着广阔的应用前景,然而目前对纳米流体强化传热应用的研究还存在一些障碍。本文从纳米流体的制备和传热特性方面总结了近几年的研究进展,并提出了研究过程中需要克服的几个问题,以促进今后进一步的研究工作。     

Convective heat transfer flow of nanofluid in a porous medium over wavy surface

In this letter, water base nanofluid flow over wavy surface in a porous medium of spherical packing beds is investigated. The copper oxides particles are taken into account. These properties are rehabilitated when fluid interacts with porous walls. For porous medium, Dupuit–Forchheimer model; an extension of Darcy's law model is utilized. The natures of velocity and temperature profiles of nanofluid are discussed graphically whereas the values of convection heat transfer coefficient in the presence of different nanoparticles concentrations in porous medium is presented in tabular form. The obtained results illustrate that convection heat transfer is improved by nanoparticles concentration but reduces when fluid attract to pores structured medium. On the other hand, when particles are added in fluid, convection heat transfer rate is improved but flow velocity is declined.     

纳米流体在热管中应用的研究进展

随着纳米流体用于换热器的强化换热,纳米流体热管换热器的研究逐步扩展到各个领域,从航天到化工,从电子到能源。纳米流体热管由于表面温度低,较高的传热系数和较小的热阻,受到了广泛的关注。文中总结了纳米流体热管国内外的最新研究进展。     

Numerical modeling of nanofluid flow and heat transfer in a quartered gearwheel-shaped heat exchanger using FVM

The numerical modeling of natural convection fluid flow and heat transfer in a quarter of gearwheel-shaped heat exchanger is carried out. The heat exchanger is included with internal active square bodies. These bodies have hot and cold temperatures with different thermal arrangements. Three different thermal arrangements are considered and showed with Case A, Case B and Case C. The CuO-water nanofluid is selected as operating fluid. The Koo-Kleinstreuer-Li (KKL) correlation is utilized to estimate the dynamic viscosity and thermal conductivity. In addition, the shapes of nanoparticles are taken account in the analysis. The Rayleigh number, nanoparticle concentration and thermal arrangements of internal active bodies are the governing parameters. The impacts of these parameters on the fluid flow, heat transfer rate, local and total entropy generation and heatlines are studied, comprehensively. The results show that the heat transfer rate enhances with increasing of Rayleigh number and nanoparticle concentration. Moreover, the thermal arrangement of internal active bodies has considerable effect on the heat transfer between heat sources and heat sinks. On the other hand, the total entropy generation enhances and decreases with increasing of Rayleigh number and nanoparticle concentration, respectively.     

Flow and heat transfer over a rotating porous disk in a nanofluid

The steady flow of an incompressible viscous fluid due to a rotating disk in a nanofluid is studied. The transformed boundary layer equations are solved numerically by a finite difference scheme, namely the Keller-box method. Numerical results for the flow and heat transfer characteristics are obtained for various values of the nanoparticle volume fraction parameter φ and suction/injection parameter h₀. Two models for the effective thermal conductivity of the nanofluid, namely the Maxwell-Garnett model and the Patel model, are considered. It is found that for the Patel model, the heat transfer rate at the surface increases for both suction and injection, whereas different behaviors are observed for the Maxwell-Garnett model, i.e. increasing the values of φ leads to a decrease in the heat transfer rate at the surface for suction, but increases for injection. The results of this study can be used in the design of an effective cooling system for electronic components to help ensure effective and safe operational conditions.     

Flow and heat transfer of a hybrid nanofluid past a permeable moving surface

A steady flow and heat transfer of a hybrid nanofluid past a permeable moving surface is investigated. In this study, 0.1 solid volume fraction of alumina (Al₂O₃) is fixed, then consequently, various solid volume fractions of copper (Cu) are added into the mixture with water as the base fluid to form Cu-Al₂O₃/water hybrid nanofluid. The similarity equations are obtained by converting the governing equations of the hybrid nanofluid using the technique of similarity transformation. The bvp4c function available in Matlab software is used to solve the similarity equations numerically. The numerical results are obtained for selected parameters and discussed in detail. It is found that hybrid nanofluid enhances the heat transfer rate compared to the regular nanofluid. The results show that two solutions exist up to a certain value of the moving parameter and suction strengths. The critical value in which the solution is in existence decreases as nanoparticle volume fractions increase. The temporal stability analysis is conducted in determining the stability of the dual solutions, and it is revealed that only one of them is stable and physically reliable.     

Transient electrohydrodynamic convective flow and heat transfer of MWCNT - Dielectric nanofluid in a heated enclosure

A computational research was performed to analyze the electrohydrodynamic (EHD) convective heat transfer in a differentially heated dielectric-MWCNT nanofluid layer. The study was conducted on a square enclosure subjected to a temperature gradient between these two vertical walls as well as a potential difference between these horizontal walls. The enclosure was filled with MWCNT oil-based nanofluid; the MWCNT nanoparticles were dispersed in a perfectly insulating thermal oil with a volume fraction of hardly exceeded 0.4%. The governing equations were derived with the assumption of homogeneous nanofluid and were solved with employing finite volume method. Based on the obtained results, it was found that the increase of Rayleigh number, electric Rayleigh number and nanoparticle concentration enhanced the heat transfer. For high thermal and electric Rayleigh number values, the flow and heat transfer became time dependent and accordingly a frequency study was also performed. It was found that the inclusion of an electric field with the addition of nanoparticles led to a significant heat transfer enhancement of about 43%.     

利用格子Boltzmann方法模拟矩形腔内纳米流体Raleigh-Benard对流

利用格 子 Boltzmann方法模拟矩形腔内纳米流体Rayleigh-Benard对流, 得到温度场和流线分布, 比较分析不同Ra数、体积分数、粒径下纳米流体对流换热的变化情况. 结果表明: 在相同的Ra 数和体积分数下, 纳米流体的对流换热随着粒径的增大而减弱; 在相同的Ra数和粒径下, 纳米流体的对流换热随着体积分数增大而增强. 关键词： 纳米流体 Raleigh-Benard 多相流 格子Boltzmann方法     

Flow and heat transfer of a nanofluid over a hyperbolically stretching sheet

This article explores the boundary layer flow and heat transfer of a viscous nanofluid bounded by a hyperbolically stretching sheet. Effects of Brownian and thermophoretic diffusions on heat transfer and concentration of nanoparticles are given due attention. The resulting nonlinear problems are computed for analytic and numerical solutions. The effects of Brownian motion and thermophoretic property are found to increase the temperature of the medium and reduce the heat transfer rate. The thermophoretic property thus enriches the concentration while the Brownian motion reduces the concentration of the nanoparticles in the fluid. Opposite effects of these properties are observed on the Sherwood number.     

Numerical investigation of laminar flow and heat transfer in a radial flow cooling system with the use of nanofluids

Nanofluids, because of their enhanced heat transfer capability as compared to normal water/glycol/oil based fluids, offer the engineer opportunities for development in areas where high heat transfer, low temperature tolerance and small component size are required. In this present paper, the hydrodynamic and thermal fields of a water–γAl₂O₃ nanofluid in a radial laminar flow cooling system are considered. Results indicate that considerable heat transfer enhancement is possible, even achieving a twofold increase in the case of a 10% nanoparticle volume fraction nanofluid. On the other hand, an increase in wall shear stress is also noticed with an increase in particle volume concentration.