Band gap structure of disordered chiral photonic crystals

Based on the non-symmetric transmission-line method, the band gap structure of disordered chiral photonic crystals (CPC) has been investigated. The influence of the chiral parameters, the disorder, the periods and the refractive index on the band gap structure has been discussed. It is found that the photonic band gap (PBG) in CPC is more obvious than that in the conventional photonic crystals, and the PBG can be increased by increasing the periods or the contrast of the refractive index of the two media. It is also found that the existence of disorder will influence the band edge of the PBG, and such influence will increase with the increment of periods or the contrast of the refractive index of the two media.     

Novel optical modulator using silicon photonic crystals

We propose a novel compact and integrated optical modulator, which consists of p–i–n silicon photonic crystals with triangular lattice and a line defect waveguide. The device operation is based on a dynamic shift of the photonic band gap (PBG), which induced change in the silicon refractive index by the free carrier injection. We have numerically analyzed and investigated its light modulation performance by using plane wave expansion (PWE) method and finite-difference time-domain method. With small size, rapid response time and high extinct ratio, the designed optical modulator can be used in photonic integrated circuits.     

A review of photonic crystal fiber sensor applications for different physical quantities

Since the early conceptual and practical demonstrations in the late 1990s, photonic crystal fibers (PCFs) have attracted considerable interest by virtue of their promise to deliver a unique range of optical properties that are simply not possible in standard fiber types. Hollow-core photonic band gap fiber has the potential to overcome some of the fundamental limitations of solid fiber as they also provide a unique medium for a range of light. PCF also be used as a unique optical material to make sensors due to the air-holes that can be filled with different materials (liquid, gas or even solid) to alter the difference of refractive index (RI) in the two modes, has been used in various sensing search fields. The application of PCF on physical quantities is discussed, and the recent results on temperature, magnetic, strain and vibration are reviewed. These developments demonstrate that the enlarged complexity and decreased accuracy of sensors offered by PCF make it useful in a wide range of engineering monitoring applications.     

Enhanced complete photonic band gap in the optimized planar diamond structure

The diamond photonic crystal with dielectric rods has been modified to enlarge the fundamental band gap. By planarizing the diamond structure and reducing the thickness of the hexagonal meshes, the band gap can be increased substantially. The band gap is 29% for a refractive index contrast of 3.6. The modified structure is amenable to fabrication at optical and infrared wavelengths using state-of-the-art silicon-processing methods. Transfer matrix calculations demonstrate a large attenuation within the band gap.     

介质柱型二维Triangular格子光子晶体的禁带特性

采用平面波展开法数值计算了空气背景中由圆形、正六边形和正方形介质柱构造的二维三角晶格光子晶体禁带结构,并研究了介质方柱旋转角度、介质折射率和填充比对完全光子禁带宽度的影响.结果表明,在低频区,介质方柱旋转17°时,出现最大完全光子禁带,且最大禁带宽度随介质折射率的变化较为稳定.在高频区,介质方柱旋转30°时,完全光子禁带宽度最大;且介质材料折射率n=2.2时即出现完全光子禁带,n=2.6时,完全光子禁带达到最大.     

一维Al/SrF2低温超导体-电介质光子晶体能带结构

基于二流体电子模型和平面波展开法,计算了一维Al/SrF2超导体-电介质光子晶体的能带结构.结果表明:随着超导层厚度的增加,第一光子带隙中心频率和截止频率均发生蓝移,且第一带隙宽度逐渐增加到一个峰值后又逐渐变窄.更重要的是,在低于临界温度的超低温环境中,温度的微小变化,对该类光子晶体的带隙宽度、中心频率以及截止频率均有...     

Temperature dependence of photonic crystals based on thermoresponsive magnetic fluids

The influence mechanisms of temperature on the band gap properties of the magnetic fluids based photonic crystals are elaborated. A method has been developed to obtain the temperature-dependent structure information (A_sol/A) from the existing experimental data and then two critical parameters, i.e. the structure ratio (d/a) and the refractive index contrast (Δn) of the magnetic fluids photonic crystals are deduced for band diagram calculations. The temperature-dependent band gaps are gained for z-even and z-odd modes. Band diagram calculations display that the mid frequencies and positions of the existing forbidden bands are not very sensitive to the temperature, while the number of the forbidden bands at certain strengths of magnetic field may change with the temperature variation. The results presented in this work give a guideline for designing the potential photonic devices based on the temperature characteristics of the magnetic fluids based photonic crystals and are helpful for improving their quality.     

Defect and dope selective of transmission properties of 2D photonic crystal

The effects of the defect and doping on the transmission properties are investigated in two-dimensional photonic crystal (PC) with triangular rods using the finite difference time domain (FDTD) method. The results show that the width and the central position of the photonic band gap (PBG) depend on the thickness of rods with defect or composite-defect, and the refractive index of doped dielectric rods. The transmission properties of composite-defect combined with doping are further investigated. The thinner the nested concentric triangular rod and the smaller the refractive index is, the wider the band gaps is.     

一维函数光子晶体的研究

本文提出一种新型函数光子晶体, 其折射率是空间位置函数. 由费马原理, 我们给出光在一维、 二维和三维函数光子晶体中的运动方程, 以及一维函数光子晶体的色散关系、 带隙结构和透射率, 再利用传输矩阵理论研究函数光子晶体周期数、 入射角和介质层的厚度等对透射率和禁带结构的影响, 计算发现通过选择不同的折射率空间分布函数, 可以得到比传统光子晶体更宽或更窄的禁带结构. 这样为我们设计不同带隙结构的光子晶体提供理论依据.     

Theoretical study of relative width of photonic band gap for the 3-D dielectric structure

Calculations for the relative width (Δω/ω₀) as a function of refractive index and relative radius of the photonic band gap for the fcc closed packed 3-D dielectric microstructure are reported and comparison of experimental observations and theoretical predictions are given. This work is useful for the understanding of photonic crystals and occurrence of the photonic band gap.     

Band structure of photonic crystal fibers with silica rings in triangular lattice

The characteristics of the cladding band structure of air-core photonic crystal fibers with silica rings in triangular lattice are investigated by using a standard plane wave method. The numerical results show that light can be localized in the air core by the photonic band gaps of the fiber. By increasing the air-filling fraction, the band gap edges of the low frequency photonic band gaps shift to shorter wavelength, whereas the band gap width decreases linearly. In order to make a specified light fall in the low frequency band gaps of the fiber, the interplay of the silica ring spacing and the air-filling fraction is also analyzed. It shows that the silica ring spacing increases monotonously when the air-filling fraction is increased, and the spacing range increases exponentially. This type fiber might have potential in infrared light transmission.     

Tunable highly birefringent photonic bandgap fibers

A novel tunable highly birefringent photonic bandgap fiber (PBGF) is designed theoretically by filling its air holes with high-index material. The transmission band can be continuously tuned by changing the refractive index of the filling material. Accordingly, the tunable modal birefringence and polarization mode dispersion of the PBGFs are investigated by adjusting the refractive index of the filling material. Furthermore, we have also analyzed the effect of surface modes in the photonic bandgap on the characteristics of the tunable PBGFs. The simulation results show the feasibility of constructing birefringence-tunable photonic crystal fibers and related fiber devices in practical applications.     

Diffractionless optical networking in an inverse opal photonic band gap micro-chip

We present a design for a photonic crystal (PC) all-optical micro-chip based on a three-dimensional (3D) inverse opal heterostructure intercalated with a two-dimensional (2D) triangular lattice photonic crystal slab. Within the 2D micro-chip layer, we demonstrate single-mode (diffractionless) waveguiding of light in air, throughout a bandwidth of more than 70 nm near 1.55 μm. This suggests that inverse opal photonic band gap (PBG) materials can facilitate on-chip optical networking functions over the telecommunication frequency band used in current-day optical fibers.     

Extension of photonic band gaps in one-dimensional photonic crystals

A method is proposed for extending photonic band gaps by constructing periodic structures from two or more consecutively located photonic crystals with different lattice constants or filling factors. The photonic band gaps with a maximum extension are predicted by superposing the photonic band gap maps on one another. It is demonstrated that both the lowest and higher order band gaps can be merged in photonic crystals with a high refractive index contrast.     

Optical refractometer based on large-core air-clad photonic crystal fibers

A large-core air-clad photonic crystal fiber-based sensing structure is described, which is sensitive to refractive index. The sensing head is based on multimodal interference, and relies on a single-mode/large-core air-clad photonic crystal fiber (PCF)/single-mode fiber configuration. Using two distinct large-core air-clad PCF geometries-one for refractive index measurement and the other for temperature compensation, it was possible to implement a sensing head sensitive to refractive index changes in water as induced by temperature variations. The results indicated the high sensitivity of this sensing head to refractive index variations of water, and a resolution of 3.4×10(-5) refractive index units could be achieved.     

Transmission characteristics simulation of an erbium-doped lithium niobate film photonic crystal slab

A photonic crystal slab (PhC slab) which was constructed as a 2D hexagonal lattice with a finite depth was etched into an Er:LiNbO₃ film waveguide. The band diagrams and transmission spectra were simulated by plane wave expansion (PWE) and the finite-difference time-domain (FDTD) method. A high refractive index contrast of 0.5 enables strong light confinement in the vertical direction and a broad band gap. The simulated transmittance spectra indicate that the stop band is determined by lattice constant. The transmission spectra along ΓM of the PhC slab with a lattice constant 500 nm show a 250-nm broad stop band in the wavelength range from 1.33 to 1.58 μm and sharp band edge.     

带有KTP缺陷的2维光子晶体设计与能带特性

 设计了一种通过改变缺陷介质折射率实现能带特性改变的可调谐2维光子晶体激光器微腔,在光子晶体中引入点缺陷磷酸氧钛钾(KTP),在KTP两端施加交流电场控制KTP晶体折射率变化。实验过程中观察到了正方排列的光子晶体随着KTP 晶体折射率逐渐增大,晶体禁带数量减少,且向归一化频率小的方向移动,禁带宽度基本不变;而三角排列的晶格能带随着KTP折射率增大,禁带逐渐变窄,且有向低频方向移动的趋势。用平面波展开法分析了晶体的能带结构,得到理上的描述。     

One-dimensional photonic crystal design

In this article we present a method to determine the band spectrum, band gaps, and discrete energy levels, of a one-dimensional photonic crystal with localized impurities. For one-dimensional crystals with piecewise constant refractive indices we develop an algorithm to recover the refractive index distribution from the period map. Finally, we derive the relationship between the period map and the scattering matrix containing the information on the localized modes.     

Investigation of thermal influence on the bandgap properties of liquid-crystal photonic crystal fibers

We have analyzed the thermal influence on the bandgap properties of liquid-crystal photonic crystal fibers. The bandgap parameters which affect the transmission conditions have been investigated. It is observed that the photonic bandgap can be thermally tuned, i.e. the red or blue shift of the bandgap results from the temperature dependence of the refractive index of the liquid crystal. For the planar alignment of liquid-crystal filled cladding, the ordinary refractive index plays a major role in determining the bandgap properties; the extraordinary refractive index comes into influence while the ordinary refractive index is relatively constant of temperature. The analyses agree well with the experiments results.     

基于光纤的三维可调胶体光子晶体

用改进的垂直沉积法在光纤端面制备了高质量的SiO₂胶体光子晶体,经过烧结、固化构成胶体光子晶体-光纤结构. 用扫描电子显微镜确定了样品为面心立方密排结构,其密排面平行于光纤基底表面. 利用全光纤传感网络测试了该胶体光子晶体,反射峰中心位于845 nm处,与Bragg理论计算值符合很好. 将该样品浸入不同折射率的液体中,反射光谱的峰值位置随着液体折射率的改变而发生偏移,近似呈线性关系,实现了峰位可调. 对于不同浓度引起的液体折射率的变化,基于光纤的胶体光子晶体结构也能够很好地分辨出来. 关键词： 可调胶体光子晶体 2微球')" href="#">SiO₂微球 Bragg反射 光纤