Magnetic fluid applications require stability under demanding conditions. Complete magnetic fluids and their component surfactants and dispersing oils were irradiated. Their subsequent thermal oxidation was characterized by chemiluminescence and DSC. Except for polyisobutylsuccinic anhydride, irradiation sensitized the components toward oxidation. The components were ranked by stability. Complete fluids were more stable than would be predicted from their components suggesting that they may be used for nuclear applications.
Biocatalysts with microorganisms immobilized on solid carriers could provide the solution for development of continuous industrial processes for ethanol obtaining by fermentation of sugars. In this study, modified polyacrylamide hydrogels and marrow stem sunflower are used as supports for Saccharomyces cerevisiae yeast immobilization. The obtained structures are used for fermentation of molasses in batch systems. The free yeast cells are used as reference. The modification of polyacrilamide matrix with (2-hydroxyethyl)methacrylate has a positive effect on structure pore uniformity and fermentation performance. The mechanical properties of the obtained biocatalysts are compared. The novel natural matrix has net superior compression strength.
Specular reflection infrared microspectroscopy was used for chemical imaging of cross-sectioned urinary stones to determine their chemical composition and morphology simultaneously. Absorption spectral bands were recovered from reflection spectra by Kramers-Kronig transform. FUse of far-infrared radiation provides high-contrast images and allows more precise constituent distribution determinations than mid-infrared because band asymmetry after the transform caused by diffuse reflection is less in the far-infrared.
In this study, microwave assisted a hydrodistillation process (MWHD) of essential oils from lavender (Lavandula angustifolia Miller) was investigated. In order to examine any potential differences in essential oil extraction, the lavender flowers underwent enzymatic pretreatment.A 23 factorial design of experiments, combined with statistical methods of data analysis were used to optimize enzymatic pretreatment and to evaluate the influence of major variables (enzyme concentration, temperature and pH) on the performance of the microwave assisted extraction.Under optimal conditions, an extraction yield of 24 mg oil g?1 substrate was achieved (an increase by approximately 25% in comparison with the classic extraction conditions of conventional hydrodistillation).The main compounds of the essential oils obtained were analyzed and identified by gas chromatography coupled to mass spectrometry (GC-MS). Analyzing the data obtained indicated that the content of main compounds (linalool and linalyl acetate ? 73%) was greater than that obtained by conventional extraction (67%).
Bacterial cellulose (BC), a natural polymer with unique physical and mechanical properties, has several applications in the biomedical field, including drug loading and controlled drug delivery. For this study, a Box-Behnken experimental design was employed as a statistical tool to optimize the release of a model drug, amoxicillin, from BC membranes. Independent variables studied were the concentration of the drug (X1), the concentration of glycerol (X2) and the concentration of a permeation enhancer (X3). From the variables studied, drug concentration had the highest effect on drug release. Among the other independent variables, th linear and quadratic X2 terms, the linear X3 term and the interaction term X2X3 were found to affect the release of amoxicillin from bacterial cellulose membranes.
In addition to the commonly observed single molecule fluorescence intensity fluctuations due to molecular reorientation dynamics, a perylene bisimide-calixarene compound (1) shows additional on-off fluctuations due to its ability to undergo intramolecular excited state electron transfer (PET). This quenching process is turned on rather sharply when a film of poly(vinylacetate) containing 1 is heated above its glass transition temperature (Tg), which indicates that the electron transfer process depends on the availability of sufficient free volume. Spatial heterogeneities cause different individual molecules to reach the electron transfer regime at different temperatures, but these heterogeneities also fluctuate in time: in the matrix above Tg molecules that are mostly nonfluorescent due to PET can become fluorescent again on timescales of seconds to minutes.The two different mechanisms for intensity fluctuation, rotation and PET, thus far only observed in compound 1, make it a unique probe for the dynamics of supercooled liquids.
An one-pot approach was developed for the synthesis of substituted 5,7-dihydro-1,6-naphthyridines and 5,6,7,8-tetrahydroquinolines with moderate to good yields. This pathway is a modified two-step synthesis of Kröhnke pyridine and involves a four-component tandem reaction of N-phenacylpyridinium bromide, aromatic aldehydes, substituted or nitrogen-containing cyclic ketones and a nitrogen source. This multi-component reaction is performed using microwave irradiation heating of the reaction substrates under an environment of NH4OAc/HOAc.
Electron beam (EB) irradiation is a useful method to generate stable silver nanoparticles without the interference of inherent impurities generated from chemical reactions. Our experiments were carried out using linear electron beam accelerators with two different EB absorbed dose rates: 2 kGy min?1 and 7–8 kGy s?1, and with different absorbed dose levels. The optimum conditions for silver nanoparticles (AgNPs) generation by radiolysis, or by radiolysis combined with chemical reduction, were established. In order to obtain a good yield for AgNPs synthesized by radiolysis, a high dose rate is required, resulting in a rapid production process. At low absorbed dose rates, the utilization of a stabilization agent is advisable. By modifying the experimental conditions, the ratio between the chemical and radiolytic reduction process can be adjusted, thus it is possible to obtain nanoparticles with tailored characteristics, depending on the desired application.
Three mesostructured silica-type carriers, MCM-41 and MCM-41 functionalized by a postsynthesis grafting procedure with hydrophilic aminopropyl groups (MCM-APTES) and hydrophobic vinyl moieties (MCM-VTES), respectively, were investigated in order to elaborate drug delivery systems (DDS) for irinotecan molecules. All studied drug delivery systems exhibited higher cytotoxicity on murine embrionary fibroblastic (MEF) cells than free irinotecan at the same content of the cytostatic agent, whereas no toxicity was observed for the three unloaded carriers. The cytotoxic effect of irinotecan loaded on MCM-41-type carriers continued to increase even 24 h after ceasing the cell exposure to the drug and remained significantly higher than that of free irinotecan. The cellular uptake of silica-type hybrids was investigated by labelling MCM-APTES with Rhodamine B. In the case of the studied DDS, an endocytotic mechanism was found to be involved in the cell uptake process, and it was used to explain the cytotoxicity differences between free irinotecan and drug loaded on MCM-41-type supports.
The phase behavior of the carbon dioxide + cycloalkane mixtures usually receives low attention, though these systems are important for many industries, e.g. the carbon capture and storage. In this paper calculations results for the carbon dioxide + cyclopentane binary system are presented, based on SRK and PR cubic equations of state with classical van der Waals mixing rules. A single set of binary parameters for each model was proposed to predict the global phase behavior of the system in a wide range of pressure and temperature. Albeit the thermodynamic models used are simple, they are able to represent fairly well the phase behavior of the system analyzed in this paper.
This paper characterizes uranium (VI) sorption from synthetic solutions using a fixed bed Purolite resin SGA 600 U/3472 system. The effect of the sulphate anion presence in the liquid phase on sorbtion dynamics and equilibrium is analysed. In the industrial processing of solutions obtained from leaching of uranium ore (alkaline/acid), in a continuous system, there are several compounds which strongly compete with uranium for ion exchange sites and consequently these substances depress the uranium adsorption. The influence of vanadate, molybdate, chloride, and nitrate is known, therefore, in this paper, the adsorption equilibrium isotherms for uranium (VI) are obtained for different sulphate ion concentrations in solution. The adsorption capacity variation of the Purolite resin SGA 600U/3472 with the number of adsorption/desorption cycles is also studied. The experimental results reveal the negative impact of high sulphate ion content in solution on the adsorption capacity of the resin Purolite SG 600 U / 3472 with uranium (VI) and therefore it is considered one of the compounds which strongly affect the uranium adsorption.
We successfully synthesized tin dioxide nanoparticles with polyhedral morphology via an ethylene glycol assisted sol-gel approach. The structural characteristics of three tin dioxide samples were investigated after being thermally treated at 400°C, 600°C and 800°C. X-ray diffraction (XRD) patterns clearly show the formation of single phase tin dioxide nanoparticles, with crystallite size of 6–20 nm, in good correlation with Fourier transform infrared (FTIR) spectra. Transmission electron microscopy (TEM) analysis confirms the formation of 6nm polyhedral nanoparticles for the 400°C sample. Ultraviolet-visible (UV-Vis) and photoluminescence (PL) spectra suggest a high concentration of oxygen vacancies. The oxygen vacancy concentration increases with temperature, due to the combined action of the formation of VO and the energetic O compensation. X-ray photoelectron spectroscopy (XPS) analysis also confirms the formation of single phase tin dioxide and the presence of oxygen vacancies in good agreement with UV-VIS and PL data.
The aim of this research was to investigate the chemical composition of Coreopsis tinctoria Nutt. fruits extract, to highlight the potential of ultrasound assisted extraction in the fast preparation of extracts rich in polyphenols using different solvents (55%, 78% and 96% hydrous ethanol) and to evaluate the antioxidant potential of formulated extracts. LC-MS/MS was used to characterize the ethanolic extract from Coreopsis tinctoria Nutt. dried fruits. The extract contains different flavonoids (marein, flavanomarein, quercetagetin-7-O-glucoside, okanin aurone, leptosidin, luteolin, apigenin) and phenolic acids (chlorogenic acid, caffeic acid). Several parameters that could affect extraction efficiency were evaluated. Finally, this study focused on determination of plant extracts total phenolic content and their antioxidant capacity. The experimental results allowed the selection of the optimum operating parameters leading to the highest total polyphenolic content, expressed as gallic acid equivalents, and avoiding the degradation of phenolic compounds (ethanol 55%; extraction temperature 323.15 K, extraction time 30 min, liquid/solid ratio 20/1). A good relationship between total phenolic content and antioxidant capacity was obtained.
Common waste glasses (window, bottle glass or tableware) with fly ash form a glass matrix for chromium waste immobilization. Soluble chromium from residual waters was adsorbed on fly ash; the resulting solid contained 23.7% Cr6+. The three glass wastes, chromium-containing fly ash, and borax were used to make glasses in weight ratios waste glass: borax: fly ash of 1: 1: 1 and 1.5: 0.5: 1. The hydrolytic stability ranged from 18.46 to 28.13 µg g?1 soluble Na2O, qualifying them in the HGB1 class. The chemical stability, characterized by the dissolution rate, was 0.011–0.077 µg cm?2 h?1, depending on the glass composition and the aggressive medium pH. The chromium leachability is influnced by the glass composition and the pH of the leaching solution, ranging between 0–0.015% of the total chromium. Chromium waste vitrification is a viabile solution with multiple economic advantages.
The aim of this study is to evaluate the accuracy of three binary alloys’ composition, and their biocompatibility. Depending on the intended use of the medical devices made from these materials, dynamic or static tests should be performed. We have chosen static tests as we thought they may be used as knee or hip replacement, and not as cardiac valves.Three binary alloys ( Zr10Nb, Zr2.5Nb and Zr12Ta) were obtained from high purity powders (>99.9%), using an induction furnace first, and an electric arc furnace for a perfect homogenization. Their final composition was verified with a XRF analyzer-INNOV-X.Hemolysis tests can determine the degree of red blood cells lysis and the release of hemoglobin. The released hemoglobin quantity was extremely small, under 2%, in all cases, and the coagulation tests showed no risk for thrombosis. The electrochemical behavior was also studied in biological fluid, human female serum, and showed a low corrosion rate.
The obtained alloys do not cause hemolysis, so they are hemocompatible with all blood types.
A light-responsive material, aminoazobenzene functionalized AlMCM-41, was synthesized and characterized in order to be used as carrier for drug delivery devices. The light-induced hydrophobic-hydrophilic switching effect of azobenzene functionalized aluminosilicate was exploited in the release of irinotecan, a cytostatic drug. To obtain the functionalized mesoporous support, an azobenzene-silane precursor was synthesized by coupling 4-(4′-aminophenylazo) benzoic acid with 3-aminopropyl triethoxysilane and further grafted on AlMCM-41. The azobenzene functionalized mesoporous aluminosilicate exhibited no significant toxicity towards murine fibroblast healthy cells and a reduced toxicity towards murine melanocyte cells. The hybrid materials obtained by loading irinotecan on AlMCM-41 (wt. 35.4%) and aminoazobenzene modified AlMCM-41 (wt. 22%), respectively were characterized by FTIR, small and wide angle XRD, N2 adsorption-desorption isotherms and DSC analyses. A two-fold increase in the drug release rate from azobenzene functionalized aluminosilicate in phosphate buffer solution under UV irradiation was noticed, as compared with dark conditions. Moreover, the azobenzene functionalization of AlMCM-41 significantly increased the irinotecan delivery rate and total cumulative release in comparison with the pristine AlMCM-41 in similar conditions.
A thermodynamic approach for the complex chemical equilibria investigation of two-phase systems containing hydroxy aluminium sulfate (HAS) minerals in soils has been developed. This approach utilizes thermodynamic relationships combined with original mass balance constraints, where the HAS mineral phases are explicitly expressed. The factors influencing the distribution and concentrations of various soluble aluminium species have been taken into account. The new type of diagrams, based on thermodynamic, graphical and computerized methods, which quantitatively describe the distribution of soluble and insoluble inorganic, and organic, monomeric and polymeric aluminium species in acidic soil solutions in a large range of pH values has been used. The thermodynamics of equilibria of different natural HAS in soils, the conditions under which solids involving common ions can coexist at equilibrium, the acid-base and mineral equilibria and complex formation have been examined. It has been proved that the presence of sulfate ion dramatically alters the HAS mineral solubility under acidic conditions. The obtained data regarding the factors influencing Al speciation, based on the constructed diagrams of heterogeneous chemical equilibria, are in good agreement with the current experimental and theoretical evidence. The proposed approach is intended to determine the dominant processes that are responsible for the Al3+ concentration levels and its speciation in acidic soils.
After oxidation of tannins (Tannins 1–3) extracted from grape seeds, Tanoxil compounds with increased solubility and enhanced antioxidant activities were synthesized. In this research, ABTS+· assay and a chemiluminescence method were used for antioxidant measurement of hydrophilic compounds (Tanoxils 1–3).
It was observed that the antioxidant activity (AA, %) is very similar for the three samples, while at the same time AA is quite high (93.16%–96.48%). The percentage of inhibition by ABTS+· is higher for Tanoxil 2 (96.4%) as compared to Tannin 2 compound (14.34%). Moreover, the total content (TCF) of carboxyl and phenolic groups was investigated. TCF values, determined for Tanoxil products, revealed a double (Tanoxil 1) or triple (Tanoxil 2) increase as compared to the value of the TCF of Tannin 1. Tanoxil products represent an interest for future research as they have a high AA (96.4%) and the content of acidic groups is significant (TCF, 0.191 meq g?1).
