Theoretical Study on the Structures and Properties of Phenobarbital Imprinted Polymers

Recently, the investigation of novel molecularly imprinted polymers（MIPs） has attracted a lot of interest and becomes a fascinating field. The phenobarbital（PHN） was taken as an imprinted molecule and the 2-vinyl-4,6-diamino-1,3,5-triazine（VDAT） was considered as a functional monomer in this study. The geometry optimization, natural bond orbital（NBO） charge, and molecular electrostatic potential（MEP） of PHN and VDAT were studied at the M062 X level belonging to one of the hybrid density functional theories. Furthermore, we discussed the bonding conditions of PHN molecular imprinted polymers（PHN-MIPs） via the hydrogen bond length and atoms in molecules（AIM） theory. The rebinding property of PHN-MIPs was also researched. The results of MEP and NBO charge analysis were coincident. The stability property was excellent when the ratio of PHN and VDAT was 1：4. Except the classic hydrogen bonds, non-classical hydrogen bonds also existed in the imprinted polymers. By simulating the rebinding energies between the pentobarbital（PNT）, barbital（BAR）, and PHN-MIPs after the elution of PHN, the rebinding property of PHN-MIPs to PHN was excellent when PNT and BAR existed all at once. This research can provide theoretical reference for the synthesis and characterization of novel PHN-MIPs.     

Theoretical research on self-assembly system of molecularly imprinted polymers formed by melamine and trifluoromethacrylic acid

The long-range correction method (WB97XD) was applied to simulate the self-assembly system of the molecularly imprinted polymers via Gaussian 09 software. Melamine (MAM) was taken as the template molecule and trifluoromethacrylic acid (TFMAA) was taken as the functional monomer. The ethylene glycol dimethacrylate, divinylbenzene, pentaerythritol triacrylate, and trimethylolpropane trimethylacrylate were chosen as the cross-linking agents, respectively. The acetonitrile, methanol, dichloromethane, chloroform, toluene, ethanol, and dimethylsulfoxide were taken as solvents, respectively. The bonding situation, the geometry optimization of the different imprinting ratios, the binding energy, the molecular imprinting mechanism between MAM and TFMAA, and the influence of cross-linking agent as well as solvent have been studied. The detailed topological property was also applied to discuss the nature of the imprinting effect. The results indicate that MAM and TFMAA can form ordered compounds via hydrogen bond interaction. The melamine-molecularly imprinted polymers with a molar ratio of 1:6 have the lowest binding energy, the largest amount of hydrogen bonds, and the stable structure in toluene solvent. Divinylbenzene is the best cross-linking agent for the melamine-molecularly imprinted polymers in comparison with others. The study can provide a theoretical reference for the synthesis of the high selectivity melamine-molecularly imprinted polymers.     

Theoretical Design and Adsorption Properties of Molecularly Imprinted Polymers Obtained from Chloramphenicol and Acrylamide

Molecular simulations are widely used to model molecularly imprinted polymers(MIPs) in order to enhance their adsorption and selectivity. In this study, chloramphenicol(CAP) and acrylamide(AM) were used as the template and functional monomer, respectively, and pentaerythritol triacrylate(PETA), ethylene glycol dimethacrylate (EGDMA), and trimethylolpropane trimethylacrylate(TRIM) were used as cross-linking agents. The ωB97XD/6-31G(d,p) density functional theory method was employed to simulate binding sites, binding energy, the number of hydrogen bonds, the imprinted molar ratio, which produced the most stable complex, and the interaction mechanism. The cross-linking agent was optimized based on the binding energy. The atoms in molecules theory were used to study the nature of the imprinting effects. The theoretical calculations revealed that CAP and AM formed ordered complexes via hydrogen bonding interactions when the molar ratio between CAP and AM was 1:7 using TRIM as the cross-linking agent. The CAP-AM complex(molar ratio 1:7) had the most stable structure, the largest number of hydrogen bonds, and the smallest ∆E. The experimental results indicate that the CAP-MIPs formed perfect microspheres with an average particle size of 314 nm. Scatchard plot analysis showed that the CAP-MIPs had only one type of binding site over the studied concentration ranges. The dissociation equilibrium constant and maximum apparent adsorption capacities were 1887.35 mg/L(5.84 mmol/L) and 155.56 mg/g(0.482 mmol/g), respectively.     

Theoretical design and selectivity researches on the enrofloxacin imprinted polymer

In this paper, enrofloxacin (ENRO) was chosen as the template molecule, 4-vinylpyridine (4-Vpy), acrylamide (AM), trifluoromethacrylic acid (TFMAA), and 2-hydroxyethyl methacrylate (HEMA) were selected as the functional monomers, with the following cross-linking agents, ethylene glycol dimethacrylate (EDMA), pentaerythritol triacrylate (PETA), and trimethylolpropane trimethacrylate (TRIM). The stable complex configurations formed by ENRO and four monomers at the molar ratio of 1:1 were calculated using the density functional theory at the B3LYP/6-31G(d,p) level. Their natural bond orbital charges and the action sites were discussed to screen the appropriate functional monomer. The optimal molar ratio of template–monomer complex and the effects of cross-linking agent were investigated. The nature of the imprinting interaction was also researched via the infrared spectrum. The results reveal that the complex formed from ENRO and TFMAA has the strongest hydrogen bond interaction. When the molar ratio is 1:7, the complex has the most stable configuration. Owning to the weakest interaction between EDMA and ENRO, and the strongest interaction between EDMA and TFMAA, EDMA is considered as the suitable cross-linking agent, in comparison with PETA and TRIM for ENRO-MIPs. After the removal of ENRO molecule, the most stable ENRO-TFMAA complex owing to the better binding capacity to ENRO is compared with its structural analogues (ciprofloxacin, sparfloxacin, pefloxacin, ofloxacin, and sarafloxacin). This study provides a reliable theoretical guidance for the preparation of new ENRO-MIPs.     

模板结构与分子印迹效果间关系的研究

以一些分子量和体积都较小的简单化合物作为模板分子,合成分子印迹聚合物 。通过总结43种化合物的分子印迹聚合物的色谱数据,来研究模板分子的分子量、 作用位点数目、分子刚性等因素与印迹效果的关系。根据免疫学中免疫原性的定义 ,我们提出“印迹原性”的概念,即,化合物能够产生印迹效应的性质称为印迹原 性;具有印迹原必的化合物称为印迹原;并讨论了具有较强选择性的印迹原的化学 基础。所得到的结论将有助于对分子印迹聚合物的识别机理的进一步理解,并且对 于根据模板分子性质预测MIP分子识别能力将具有一定的指导意义。     

Molecular imprinting inside dendrimers

Synthetic hosts capable of binding porphyrins have been produced by a mixed-covalent-noncovalent imprinting process wherein a single binding site is created within cross-linked dendrimers. Two synthetic hosts were prepared, using as templates 5,10,15,20-tetrakis(4-hydroxyphenyl)porphyrin and 5,10,15,20-tetrakis(3,5-dihydroxyphenyl)porphyrin. These two templates were esterified with, respectively, fourth- and third-generation Fréchet-type dendrons containing homoallyl end-groups. The resulting tetra- and octadendron macromolecules underwent the ring-closing metathesis reaction using Grubbs' Type I catalyst, RuCl(2)(P(C(6)H(5))(3))(2)(CHCH(2)C(6)H(5)), to give extensive interdendron cross-linking. Hydrolytic removal of the porphyrin cores afforded imprinted hosts whose ability to bind porphyrins with various peripheral substituents was investigated by UV-visible spectrophotometric titrations and size exclusion chromatography. The results indicate a high yield of imprinted sites that show high selectivity for binding of porphyrins capable of making at least four hydrogen bonds, but only a moderate degree of shape selectivity.     

环丙沙星分子印迹聚合物的合成及识别性能研究

采用分子印迹技术合成了以环丙沙星为印迹分子,以甲基丙烯酸和4-乙烯基吡啶同时为功能单体的分子印迹聚合物。运用平衡结合实验研究了印迹聚合物的吸附特性和选择识别能力。Scatchard分析表明,在所研究的浓度范围内,分子印迹聚合物中形成了两类不同的结合位点。底物选择实验表明,这种聚合物对环丙沙星呈现高的选择结合能力。     

苄嘧磺隆印迹聚合物的波谱分析及吸附性能研究

以苄嘧磺隆为模板分子, α-甲基丙烯酸为功能单体, 三甲氧基丙烷三甲基丙烯酸酯为交联剂, 二氯甲烷为致孔剂, 在20 ℃温度下, 采用紫外引发沉淀聚合方法制备了苄嘧磺隆分子印迹聚合物. 紫外光谱和核磁共振氢谱实验提示了聚合前模板分子与功能单体之间的相互作用主要是分子间氢键, 分子间氢键相互作用能和双氢键的键距由Hyperchem 7.0和Gaussian 03W软件分别计算为: －28.6163 kJ/mol和0.179～0.181 nm. 制备的印迹聚合物在高效液相色谱和吸附动力学实验中都表现出对模板分子有较强的吸附作用.     

A connection between the binding properties of imprinted and nonimprinted polymers: a change of perspective in molecular imprinting

In the current paradigm for molecular imprinting, the imprinted binding sites exist as a consequence of the polymerization process around templates, and the properties of nonimprinted polymers (NIPs) have largely been overlooked. Thus, nothing can be affirmed a priori concerning the binding properties of NIPs. We propose an alternative view where the imprinting effect is due to the presence of a template molecule that enhances the pre-existing binding properties of a polymer. If a NIP shows no binding properties toward a target molecule, the corresponding imprinted polymer (MIP) will show a weak imprinting effect. On the other hand, if a NIP shows binding properties toward a target molecule, the corresponding MIP will show a significant imprinting effect. To verify this hypothesis, we prepared a 96-member combinatorial polymeric library in the absence of any template molecule. This library was screened for several potential ligands, and with no exceptions, the composition of the best-binding NIP produced a MIP with excellent binding properties, whereas a low-binding NIP formulation produced a MIP with comparable low binding. To validate these results, the binding properties toward naproxen and ibuprofen were measured for two combinatorial libraries of polymers prepared in the presence (MIP library) and the absence (NIP library) of the template molecule. The experiment's results showed a correlation between the apparent affinity constants measured for the NIP and MIP libraries, confirming the proposed hypothesis. Moreover, for closely related molecules, it was shown that binding selectivity is an emergent property derived from the imprinting process and not a property of NIPs.     

Computer Simulation and Experimental Investigations of Phenobarbital Molecular Imprinting System

The interaction process between the phenobarbital(PHN) and acrylamide(AM) was studied using the M062X/6-31G(d,p) method. The PHN and AM were used as the template and functional monomer,respectively. The molecular electrostatic potential(MEP) was simulated for predicting the reactive sites. The atoms in molecules theory helped to reveal the imprinting mechanism and optimize the molar ratios for PHN and AM. The molecular imprinted polymers(MIPs) containing PHN were synthesized through the precipitation polymerization. The diameter range of the obtained MIPs was from 150 to 390 nm. According to the computational results,MIPs with the molar ratio of PHN and AM equal to 1:6 showed high selective adsorption for PHN. The apparent maximum adsorption quantity(Q_(max)) of MIPs toward PHN was 7.9 mg/g,and the Qmax of nonimprinted polymer microspheres(NIPs) was 3.2 mg/g. Herein,the studies can provide theoretical and experimental references for the controllable fabrication of MIPs.     

橙皮苷印迹聚合物的识别性能及机理研究

为了制备对橙皮苷(HES)具有特定识别能力的吸附材料,以HES为模板分子,丙烯酰胺(AM)为功能单体,甲基丙烯酸乙二醇酯(EDMA)为交联剂,在甲醇中制备了HES印迹聚合物(MIP),采用平衡吸附实验方法研究了聚合物的吸附性能和选择性能,探讨了聚合物的印迹机理和识别机理.结果表明,MIP对HES具有较高的亲和性和选择性.当HES浓度为0.048 mmol/L时,MIP及相应NMIP对HES的分配系数KD分别为10.17 和2.973,印迹因子α达到3.421.MIP对结构相似物芦丁及柚皮苷的选择因子β分别为2.446和1.246.机理研究表明识别位点来自AM与HES苯甲酰系统的氢键作用,吸附溶液中水含量的增加对MIP的识别能力有较大的影响.最后,以高效液相色谱研究了MIP在样品中的分离富集能力,表明该印迹聚合物具有一定的应用潜能.     

Chemically Modified Chitosan Beads as Molecularly Imprinted Polymer Matrix for Adsorptive Separation of Proteins

In a phosphate buffer, a hemoglobin (Hb)-imprinted polymer complex was preparedusing maleic anhydride (MAH) modified chitosan beads as matrix, acrylamide (AM) as functionalmonomer, N,N-methylenebisacrylamide (MBA) as cross-linker and potassiumpersulfate (KPS) /sodium hydrogen sulfite (NaHSO3) as initiators. Langmuir analysis showed that an equal class ofadsorption was formed in the molecular imprinting polymer (MIP), and the MIP has highadsorption capacity and selectivity for the imprinted molecule. The MIP can be reused and therecovery was approximately 100% at low concentration.     

Evaluation of molecularly imprinted polymers using 2′,3′,5′-tri-O-acyluridines as templates for pyrimidine nucleoside recognition

In this paper, we describe the synthesis and evaluation of molecularly imprinted polymers (MIPs), prepared using 2′,3′,5′-tri-O-acyluridines as ‘dummy’ templates, for the selective recognition of uridine nucleosides. The MIPs were synthesised using a non-covalent approach with 2,6-bis-acrylamidopyridine (BAAPy) acting as the binding monomer and ethylene glycol dimethacrylate (EGDMA) as the cross-linking agent. The MIPs were evaluated in terms of capacity, selectivity and specificity by analytical and frontal liquid chromatography measurements. The results obtained in organic mobile phases suggest that the nucleosides are specifically bound to the polymer by the complementary hydrogen bonding motifs of the binding monomer and the nucleoside bases. The MIPs exhibited relatively high imprinting factors for 2′,3′,5′-tri-O-acyluridines, while they did not show any binding capacity for other nucleosides lacking the imide moiety on their base. Moreover, the presence of ester-COO groups in the EGDMA cross-linker may lead to the formation of additional hydrogen bonds with the 2′,3′ and/or 5′-OH of sugar part, allowing enhancement of the recognition of the uridine nucleosides. In aqueous media, results show that the binding is driven by hydrophobic interactions.     

Theoretical and experimental research on self‐assembly system of molecularly imprinted polymers formed via chloramphenicol and methacrylic acid

Chloramphenicol was chosen as the imprinting molecule and the methacrylic acid was chosen as the functional monomer to prepare molecularly imprinted polymers. Ethylene glycol dimethacrylate, pentaerythritol triacrylate, and trimethylolpropane trimethylacrylate were used as the cross‐linking agents, respectively. The interaction processes between chloramphenicol and methacrylic acid were simulated by using the ωB97XD/6‐31G (d,p) method. The self‐assembled configuration, bonding sites, binding number, binding energy, and interaction principle of stable complex formed by chloramphenicol and methacrylic acid with different molar ratios have been studied. The selectivity of the most stable complex formed from chloramphenicol and methacrylic acid was discussed with the thiamphenicol and florfenicol as the analogues of chloramphenicol. The results showed that chloramphenicol and methacrylic acid were interacted through the hydrogen bonds. When the molar ratio was 1:10 and pentaerythritol triacrylate as the cross‐linking agent, the ordered complex formed by chloramphenicol and methacrylic acid has the largest amount of hydrogen bonds and the lowest binding energy. Scatchard analysis showed that the maximum apparent adsorption capacity was 173.3 mg/g (0.536 mol/g), and the selection factor of florfenicol was the largest. This study provides a reliable theoretical and experimental basis for the design, preparation, and characterization of chloramphenicol molecularly imprinted polymers.     

尼卡地平分子聚合物的制备及识别性能研究

采用分子印迹技术合成了以尼卡地平为模板分子,甲基丙烯酸为功能单体的分子印迹聚合物(MIP).运用平衡结合实验研究了聚合物的吸附特性和选择识别能力.通过Scatchard方程分析,结合位点的离解常数Kd=1.03 mmol·L-1,最大表观结合常数Qmax=18.76 μmol·g-1.结果表明,分子印迹聚合物对尼卡地平呈现出较高的吸附性和选择识别性,对尼卡地平药物的分离富集和检测具有实际临床意义.     

Preparation of melamine molecularly imprinted polymer by computer‐aided design

Melamine was chosen as template, methacrylic acid was chosen as functional monomer, and divinylbenzene, ethylene glycol dimethacrylate, trimethylolpropane trimethylacrylate were chosen as cross‐linking agents, respectively. The WB97XD/6‐31G(d, p) method was used to calculate the geometry optimization of the different imprinting ratios, the action sites, the bonding situation, and the optimization of the cross‐linking agents. The nature of the imprinting effect was also studied by the atoms in molecules theory. The theoretical results showed that melamine interacts with methacrylic acid by hydrogen bonding, and the melamine molecularly imprinted polymers with a molar ratio of 1:6 have the most hydrogen bonds and the most stable structure. Divinylbenzene is the best cross‐linking agent for the melamine molecularly imprinted polymers. The melamine molecularly imprinted polymers were synthesized by precipitation polymerization. The results showed that the maximum adsorption capacity for molecularly imprinted polymers towards melamine is 19.84 mg/g, and the adsorption quantity of the polymers to melamine is obviously higher than that of cyromazine, cyanuric acid, and trithiocyanuric in milk. This study could provide theoretical and experimental references for the screening of the imprinting ratio and the cross‐linking agent for the given template and monomer system.     

二茂铁甲酸分子印迹聚合物的制备和识别机理、结合特性

以二茂铁甲酸（FCA）为模板,选用不同的功能单体制备了一系列分子印迹聚合物,用平衡结合实验考察了它们对模板分子的结合性能。 结果表明,以甲基丙烯酸为功能单体制得的印迹聚合物P1对模板分子有很好的选择性,特异性吸附量ΔCP为23.18 μmol/g,印迹因子IF为2.33,竞争性结合实验结果表明,P1可以将模板分子从结构类似物中分离出来。 Scatchard方程研究表明,在研究的浓度范围内聚合物中形成了一类等价的结合位点,其对模板分子的平衡离解常数K=1.94 mmol/L,最大表观结合量Cpmax=92.33 μmol/g。 研究还表明,FCA的羧基是在聚合物的孔穴中产生识别位点的功能基,模板分子上的羧基与MAA的羧基形成双重氢键作用是分子识别的主要作用力。     

核-壳型厚朴酚印迹聚合物的制备及性能研究

以表面修饰功能基团的SiO2微球为基体,以厚朴酚为模板分子,丙烯酰胺为功能单体,丙烯酸乙二醇二甲酯为交联剂,在SiO2微球表面制备对厚朴酚具有较好选择识别能力的核-壳型印迹聚合物.采用红外光谱及扫描电镜等技术表征聚合物的结构及形态.结果表明,该印迹聚合物表面成功制备了壳层厚度约为200nm的均匀印迹层.通过静态吸附、Scatchard分析法以及竞争吸附实验研究了该聚合物的吸附性能和选择性,结果表明,它对厚朴酚形成均一结合位点,离解常数为0.19mg/mL.     

杯芳烃衍生物和丙烯酰胺作为复合功能单体的分子印迹聚合物对海因类化合物的选择性识别研究

以杯[4]芳烃衍生物+丙烯酰胺作为复合功能单体,将其运用到分子印迹技术中,对海因类化合物R-苄基海因进行选择性识别.研究结果表明,由单一的杯[4]芳烃衍生物或丙烯酰胺作为功能单体的分子印迹聚合物对R-苄基海因的选择性均不高,而由杯[4]芳烃衍生物+丙烯酰胺作为复合功能单体的分子印迹聚合物对模板分子具有较高的特异选择性.     

活性自由基聚合法制备多壁碳纳米管表面槲皮素分子印迹聚合物及其应用

为了制备能有效分离富集药草中槲皮素的固相萃取柱,以丙烯酰胺(AM)修饰的碳纳米管为载体,三硫代碳酸酯(DBTTC)为可逆加成-断裂链转移剂(RAFT试剂),槲皮素为模板,甲基丙烯酸(MAA)为功能单体,乙二醇二甲基丙烯酸酯(EGDMA)为交联剂,乙腈为致孔剂,制备了槲皮素分子印迹聚合物,采用红外光谱、扫描电镜和热重分析对印迹材料进行表征,通过高效液相色谱(HPLC)研究聚合物的吸附性能和对底物的特异性识别能力。结果表明,通过活性自由基聚合法合成的多壁碳纳米管表面槲皮素分子印迹聚合具有更好的形态结构和吸附性能,且对槲皮素有很好的特异性识别能力。