Transesterification of Ethylene Carbonate with Dimethyl Terephthalate over Various Metal Acetate Catalysts

IntroductionDimethyl carbonate(DMC) is known to be a novelbuilding block in organic synthesis. As an environmen-tally benign compound and a unique intermediate,DMC has attracted much attention[1,2]. Among the va-rious methods for synthesizing DMC, the tra…     

Graft Copolymerization of Methyl Methacrylate onto Poly(Ethylene Terephthalate) Fibers Using Benzoyl Peroxide

Abstract

The graft copolymerization of methyl methacrylate onto poly(ethylene terephthalate) fibers has been studied using benzoyl peroxide as initiator. The grafting reactions were carried out within the 70 to 90°C temperature range, and the variations of graft yield with monomer and initiator concentrations were also investigated. The overall activation energy for grafting was calculated as 34.1 kcal/mol. The results of dyeability with the disperse dye suggested that diffusion into the fiber structure was moderately difficult when the graft yield reached 14?15%. The maximum graft yield was obtained at a benzoyl peroxide concentration of 4.00 × 10^?3 M. The decomposition temperature values obtained from thermogravimetric analysis show that the thermal stability of poly(ethylene terephthalate) fibers decreased as a result of grafting. Further, such change in the properties of methyl methacrylate grafted fibers as density, diameter, and moisture regain were also determined.     

Graft Copolymerization of Acrylamide on Swollen poly (Ethylene Terephthalate) Fibers Using Cerium Ammonium Nitrate Initiator

Abstract

In this study the graft copolymerization of acrylamide (AAm) on swollen poly(ethylene terephthalate) (PET) fibers using cerium ammonium nitrate (CeAN) initiator was investigated. Five organic solvents, dimethylsulfoxide (DMSO), morpholine, acetic acid (HAc), n-butanol, and 1,2-dichloroethane (DCE), were used as swelling agents. DMSO was found to be the most suitable swelling agent. Solvent diffusion into the fibers was observed to increase with treatment time and temperature. The optimum graft yield was obtained when fibers were grafted after having been swollen in DMSO for a period of 1 hour at 140°C. Variation of graft yield with polymerization time and temperature, and monomer, initiator, and acid concentrations were investigated. Graft yields were observed to increase initially with polymerization time, then to level off, and were found to increase up to a certain monomer and Ce⁴⁺ concentration, then to decrease slightly. The effect of grafting on such fiber properties as diameter, viscosity, and moisture gain were also investigated.     

Calorimetric study of Diepoxide Chain-Extended Poly(Ethylene Terephthalate)

A series of chain-extended PET samples were obtained by the use of different amounts of a diepoxide as chain extender, which was prepared for this purpose. These samples exhibited different intrinsic viscosities and degrees of branching or cross-linking. The effects of this differentiation on the thermal properties were studied by differential scanning calorimetry. The thermal parameters studied were the glass transition temperature (T_g), the cold-crystallization temperature (T_cc), the melting temperature (T_m), the enthalpy (ΔH_m) and the degree of crystallinity. The data revealed that, the higher the quantity of chain extender or the chain extension time, the higher T_gand T_cc, but the lower T_mand ΔH_m, i.e. the more amorphous the chain-extended samples, as also shown by density measurements. This revised version was published online in July 2006 with corrections to the Cover Date.     

Chromatography of inorganic anions on poly(vinyl alcohol) gel columns with acidic eluents

Summary Poly(vinyl alcohol) (PVA) gel shows ionic retention properties for common inorganic anions when an acidic eluent is used. The ionic property of the PVA gel is due to the proton-acceptable nitrogen atoms of the cross-linking agent and the carboxylic residues being comprised in the gel matrix. The extent of the net charge on the gel surface depends on the pH of the eluent. At a pH ranging from 2.3 to 5.3, the PVA gel behaves as a weak anion exchanger with very low ion-exchange capacity. At these conditions four UV-absorbing inorganic anions (bromate, bromide, nitrate, and nitrite) are separated by eluting with aqueous sulfuric acid. Alkyl groups introduced on the gel surface hinder the ionized solute molecules from accessing to the positively charged functional groups on the gel surface. A neutral solute (HNO₂) is retained with non-ionic interactions.     

High-performance liquid chromatography of sugars on copper (II) modified silica gel

Summary A sensitive method of sugar analysis by HPLC is described in which a copper (II) modified silica gel as stationary phase is used. Detection is based on UV absorption of a complex formed between the sugar, copper, and ammonia.     

The interaction of vinyl monomers and poly (ethylene terephthalate) in the presence of various initiators produces a physical mixture,not a graft copolymer

The interaction between poly(ethylene terephthalate) and four vinyl monomers, methacrylic acid, methyl methacrylate, styrene, and vinyl acetate, has been studied using hydrogen peroxide, benzoyl peroxide, azobisisobutyronitrile, and cobalt acetylacetonate as initiators. The ease of addition of the monomer to the polymer follows the solubility of the monomer in the polymer film. No chemical interaction occurs between the PET film and the monomer; rather, the monomer is homopolymerized within the film and forms a semi-interpenetrating network so that the two homopolymers cannot be separated unless the PET matrix is destroyed. © 1995 John Wiley & Sons, Inc.     

结构改变对聚对苯二甲酸乙二醇酯局域能级性质的影响

用双轴拉伸、热处理和γ射线辐照的方法制备了一系列具有不同平面取向度,不同结晶度和不同分子链长度的PET试样。通过热释电极化温度扫描法分离出对解俘获电流峰贡献的各局域能级峰。平面取向度、结晶度和γ辐照剂量的提高引起局域能级深度增加,结构缺陷种类的增多导致局域能级数增大(由二个增至六个),能级深度分布加宽。     

Determination of Iodide and Thiocyanate in Seawater by Liquid Chromatography with Poly(ethylene glycol) Stationary Phase

Novel, simple, rapid, highly sensitive, and direct determination of iodide and thiocyanate ions in seawater has been performed by liquid chromatography (LC) with UV detection at 220 nm. The separation was achieved on a C₃₀ column of conventional size (150 mm × 4.6 mm i.d.) modified with poly(ethylene glycol); an aqueous solution of 300 mM sodium sulfate and 50 mM sodium chloride was used as mobile phase. Detection limits (S/N=3) obtained by injecting a 20-L sample were 0.5 and 6 ng mL^–1 for iodide and thiocyanate, respectively. The method was successfully used for rapid and direct determination of iodide and thiocyanate in seawater samples, collected from the coasts of Japan, without any extra pretreatment.Dedicated to Professor K. Jinno on the occasion of his 60^th birthday     

Determination of the molecular weight and other physicochemical properties of poly(bubylene glycol) 1000 by gradient RPHPLC and measurement of the ELSD, UV, and fluorescence responses

Summary Molecular weight and other physicochemical data for poly(butylene glycol) 1000 (PBG 1000) have been determined by use of a new, highly efficient, gradient reversed-phase high-performance liquid-chromatographic (RPHPLC) procedure. Separation of the native material or its α, ω-bis(1-naphthylurethane) derivative was achieved on a C₁₈ stationary phase with a ternary acetonitrile-water-tetrahydrofuran mobile phase. Detection was achieved by measurement of the signal response from evaporative light scattering (ELSD), UV, and fluorescence (FD) detection. Proof that all the oligomers contained in the sample had been separated by the method was obtained by liquid chromatography coupled with electrospray ionization time-of-flight mass spectrometry (LC-ESI-TOFMS). It was also confirmed by this technique that di(butylene glycol) is the lowest homologue in the sample. Although the dimer was also observable in the HPLC-UV trace of the PBG 1000 α, ω-bis(1-naphthylurethane) derivative, it was obviously too valatile to be seen in the ELSD trace; tri(butylene glycol) was, nevertheless, still recognizable with sufficient signal intensity. Because all the homologues were separated to baseline, the method was used to calculate the number- and weight-average molecular weights,M _n andM _w, both from peak areas and from peak heights. The best fit to data obtained from end-group titration were obtained from calculations based on the HPLC-UV response;M _n values of 948 and 937 were obtained from peak heights and areas, respectively.M _n andM _w values calculated from the ELSD trace obtained from native PBG 1000 were substantially (ca 10%) lower that those calculated from the UV trace obtained from the α, ω-bis(1-naphthylurethane) derivative. Similar differences were also discovered by comparing theM _n andM _w values obtained from UV and FD-values were approximately 20% higher for FD. When the retention times of individual oligomers, from either ELSD of the native sample or from UV-FD of the α,ω-bis(1-naphthylurethane) derivative, were plotted against the number of repeat units,P, the ELSD curve approaches the UV-FD curve at values ofP of approximately 60. This observation can be explained by the pronounced contribution of the hydrophobic end-groups to the overall retention of PBG 1000; the effect of this decreases with increasing chain length and becomes nearly independent ofP only for a very high degree of polymerization. Papers dedicated to Professor Dr. Heinz Engelhardt on the Occasion of his 65th birthday     

Shape memory effects of poly(ethylene terephthalate-co-ethylene succinate) random copolymers

Random copolymers based on terephthalate acid, succinic acid and ethylene glycol, with thermally induced shape memory, were synthesized via melt polycondensation. The chemical structures of these poly(ethylene terephthalate-co-ethylene succinate) copolymers (PET-co-ES) were ascertained by ¹H NMR spectroscopy. The thermal and viscoelastic characteristics of these copolymers were studied in terms of the succinic acid content using differential scanning calorimetry and dynamic mechanical analysis. The shape memory effects of the copolymers were examined using the strain test. The experimental results suggested that all copolymers exhibited shape memory above the glass transition temperature and that the highest shape recovery rate was 90%. The shape recovery rates of all test samples declined with the number of cycles. This decrease in the shape recovery rate may result from the change in the degree of polymer orientation and/or crystallinity during repeated testing.     

Studies on the Simultaneous Synthesis of Dimethyl Carbonate and Poly（ethylene terephthalate）： I. Catalytic Activity of Metal Acetate in Transesterification of Ethylene Carbonate with Dimethyl Terephthalate

Dimethyl carbonate (DMC) is a new building block of organic synthesis, as an environmentally benign compound and unique intermediate, it has been attracted much attention. Among the various methods for synthesizing DMC, transesterification of ethylene car…     

Polysiloxane-encapsulated stationary phase for reversed-phase high-performance liquid chromatography

Summary Silica beads of 6-μm average diameter were silanized with methylvinyldiethoxysilane and then subjected to encapsulation with poly(methylvinylsiloxane). The resulting product is a new stationary phase for reversed-phase high performance liquid chromatography (RP-HPLC) which has superior ability for the separation of polar, non-polar and basic compounds. The chromatographic peaks are symmetric. Its stability has been studied; after continuous use for three months the carbon content and chromatographic behaviour of the phase were unchanged. on to the silica surface to given an uniform organic film. Material prepared in this way has both good chromatographic behaviour and superior selectivity. Because contact of the silica matrix with the mobile phase is avoided, the alkali-resisting ability of the stationary phase is increased. The non-specific adsorption of alkaline solutes on to the silica surface is also avoided because of the complete coverage of surface silanol groups. Reports of stationary phases encapsulated with polystyrene [6], polybutadiene [I] and octadecylsiloxane polymers have recently appeared in the literature [3]. In this paper we report the encapsulation of poly-(methylvinylsiloxane) (analogous to the phase SE-31 often used in GC) on to a silica matrix previously modified with methylvinyldiethoxysilane. The resulting phase has superior performance in reversed-phase HPLC.     

Synthesis of patterned polymer brushes from flexible polymeric films

Surface-initiated polymerizations were carried out from polymeric surfaces of commercially important polyester films, poly(ethylene terephthalate) (PET) and poly(ethylene naphthalate) (PEN). These plastic films were modified prior to polymerization by plasma oxidation, exposing surface hydroxyl groups, in order to immobilise patterned self assembled monolayers (SAMs) of trichlorosilane initiator, through the soft lithographic method of microcontact printing (μCP). Subsequently, polymerizations were initiated from the surface via controlled atom transfer radical polymerization (ATRP), under aqueous conditions, to create patterned brushes of the thermo-responsive polymer poly(N-isopropyl acrylamide) (PNIPAM). By creating patterned, rather than homogeneous brushes characterization was made possible by atomic force microscopy (AFM).     

Effect of Surface Treatment of Titanium Dioxide Nanoparticles on Non-Isothermal Crystallization Behavior,Viscoelastic Transitions and Cold Crystallization of Poly(Ethylene Terephthalate) Nanocomposites

The effect of untreated and tri-n-octylphosphine oxide (TOPO) surface-treated TiO₂ nanoparticles when included as filler in poly(ethylene terephthalate) on its compatibility, non-isothermal crystallization behavior, viscoelastic transitions and cold crystallization has been studied. The effectiveness of the surface treatment has been studied using infrared spectrophotometry (FTIR) and thermogravimetric analysis (TGA). The effect of the untreated and surface-treated nanofiller content in the polymer, added by an extrusion process, on the non-isothermal crystallization has been studied by differential scanning calorimetry (DSC). The influence on the viscoelastic transitions and cold crystallization of PET nanocomposites has been studied through thermomechanical analysis (TMA). The surface treatment and the concentration of nanofiller influence the non-isothermal crystallization behavior, the viscoelastic transitions and the cold crystallization of the PET nanocomposites, enables us to evaluate the compatibility and the level of dispersion/aggregation of the nanofiller in the poly(ethylene terephthalate).     

Glycolysis of poly(ethylene terephthalate) catalyzed by ionic liquids

Poly(ethylene terephthalate) (PET) from an industrial manufacturer was depolymerized by ethylene glycol in the presence of a novel catalyst: ionic liquids. It was found that the purification process of the products in the glycolysis catalyzed by ionic liquids was simpler than that catalyzed by traditional compounds, such as metal acetate. Qualitative analysis showed that the main product in the glycolysis process was the bis(hydroxyethyl) terephthalate (BHET) monomer. Thermal analysis of the glycolysis products was carried out by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The influences of experimental parameters, such as the amount of catalyst, glycolysis time, reaction temperature, and water content in the catalyst on the conversion of PET, selectivity of BHET, and distribution of the products were investigated. Results show that reaction temperature is a critical factor in this process. In addition, a detailed reaction mechanism of the glycolysis of PET was proposed.     

Characterization of cross-linking structure in terephthalate polyesters formed through material recycling process by pyrolysis-gas chromatography in the presence of organic alkali

Typical terephthalate polyesters such as poly(butylene terephthalate) (PBT) and poly(ethylene terephthalate) (PET) were characterized by pyrolysis-gas chromatography (Py-GC) in the presence of tetramethylammonium hydroxide in terms of the cross-linking structure formed during their material recycling. In the pyrograms of PBT and PET thermally treated at 270 °C for 1 h, which were prepared as model polymers containing cross-linking structures, an additional peak was commonly observed as well as the main reactive pyrolysis products for the original polyesters such as dimethyl terephthalate. Based on the observed spectra obtained by Py-GC/mass spectrometry and Py-GC/Fourier transform infrared spectrometry measurements, this peak was assigned to the product reflecting a biphenyl-type cross-linking structure. Furthermore, in the pyrograms of kneaded PBT and PET samples also at 270 °C for a total of 1 h, which were prepared to simulate material recycling, the same peak for the cross-linking structure was also observed, although its intensity was slightly lower than that in the samples thermally treated in air. This fact verified that the biphenyl-type cross-linking structure would be considerably formed during the recycling of PBT and PET, which might in turn contribute to the deteriorated properties of the recycled materials from waste polyesters. Moreover, difference in the formation of the cross-linking between PBT and PET is discussed on the basis of the observed results.     

Quantification of Teicoplanin in Human Plasma by Liquid Chromatography with Ultraviolet Detection

A simple high-performance liquid chromatographic method was developed for determining five major components of teicoplanin, designated A2–1, A2–2, A2–3, A2–4 and A2–5, in human plasma. Using piperacillin sodium as internal standard, teicoplanin in plasma samples was extracted by coextractive cleanup procedure. The extracts were injected into a Nova-Pak C₁₈ column maintained at ambient temperature. The mobile phase consisted of acetonitrile–0.1% trifluoroacetic acid (27:73, pH = 2.2), at a flow rate of 1.0 mL min⁻¹. The analytes were detected at the UV wavelength of 218 nm. The method was found to be linear over the concentration range of 2.5–50 mg L⁻¹ for teicoplanin (r = 0.9993 ± 0.0038), which covered the clinically expected trough plasma levels. The percentage error of the analytical method was below 9%. The intra- and inter-day reproducibility was adequate with coefficients of variation less than 7%. The chromatographic running time was 11 min. Thus, the method can be effectively applied to measure teicoplanin concentrations in clinical samples.     

The effect of annealing on the subsequent cold crystallization of amorphous poly(ethylene terephthalate)

Amorphous poly(ethylene terephthalate) was annealed at temperatures around the glass transition temperature and then heated up in differential scanning calorimeter at 20 °C min⁻¹. It was found that the annealing favored the subsequent cold crystallization and this effect became stronger with increasing annealing temperature. The experimental results were explained by considering the structural change during the annealing.