NON-EQUILIBRIUM MICROWAVE RESPONSE OF Yba2Cu3O7-δ GRANULAR THIN FILMS UNDER MAGNETIC FIELDS

Microwave responses of YBa₂Cu₃O_7-δ(YBCO) granular film have been studied at the microwave frequency of 30.5 GHz. In the absence of a magnetic field the dependence of a normal microwave response on the bias current is observed at a temperature close to T_c. When a magnetic field ranged from 5.0 mT to 33.0 mT is applied, the responses broaden and shift toward a lower temperature. In the superconducting state, the responses were found to be highly dependent on the magnetic field. For the current equal to 5.0mA and a magnetic field above 17.0mT the response increases and did not vanish even at a very low temperature, the fact is believed to be correlated to the anisotropic character of the structure.     

Influence of DCM dye doping on the magnetic field dependent electroluminescence in organic light emitting diodes

The DCM dye doped organic electroluminescence devices with structure of ITO/NPB/Alq 3 : DCM/Alq 3 /LiF/Al were fabricated. From 15 K to room temperature, the magnetic field dependent of electroluminescence (MEL) of devices was investigated. Our observations indicated that the MEL is composed of two effects in different regimes: a low field (0≤B≤40 mT) effect and a high field (B 40 mT) effect. For undoped devices, the low field effect exhibits a rapid rising with the increasing field, and the high field effect shows a slow increase and gradually saturates at room temperature. For doped devices, the low field rapid increase is also present, whereas the high field effect displays a decrease with the increasing field. The larger the injection current is, the more apparent the high field decrease is. In addition, the doped device demonstrates less temperature dependence of the high field effect than undoped device, although the undoped devices also present high field decrease of electroluminescence at low temperatures (T≤150 K). Based on the energy level trapping effect due to dye doping and magnetic field modulated triplet exciton annihilation, the experimental results are carefully explained.     

IRREVERSIBILITY LINE AND THERMAL DEPINNING IN YBa2Cu3O7-δ

By measuring magnetic torque moment in a field-sweeping process, the temperature and field dependence of the critical current density j (with a criterion of electric field) and the normalized relaxation rate Q = d lnj/d ln E of a YBa₂Cu₃O_7-δ thin film were obtained. With a minimum current density (j_min = 10A·cm^-2) the irreversibility lines at different sweeping rates were determined. It was found that these irreversibility lines cannot be fitted to either the melting line or the vortex-glass transition. All the data can be interpreted by the thermally-assisted-flux-flow model. Further investigation shows that, at irreversible tem-perature and field, U_c is much smaller than k_BT, which indicates that the thermal depinning is the real origin of the irreversibility line.     

Thermodynamic behaviour of Rashba quantum dot in the presence of magnetic field

The thermodynamic properties of an In Sb quantum dot have been investigated in the presence of Rashba spin–orbit interaction and a static magnetic field. The energy spectrum and wave-functions for the system are obtained by solving the Schrodinger wave-equation analytically. These energy levels are employed to calculate the specific heat, entropy,magnetization and susceptibility of the quantum dot system using canonical formalism. It is observed that the system is susceptible to maximum heat absorption at a particular value of magnetic field which depends on the Rashba coupling parameter as well as the temperature. The variation of specific heat shows a Schottky-like anomaly in the low temperature limit and rapidly converges to the value of 2kB with the further increase in temperature. The entropy of the quantum dot is found to be inversely proportional to the magnetic field but has a direct variation with temperature. The substantial effect of Rashba spin–orbit interaction on the magnetic properties of quantum dot is observed at low values of magnetic field and temperature.     

Electric field distribution and effective nonlinear AC and DC responses of graded cylindrical composites

The perturbation method is used to study the localization of electric field distribution and the effective nonlinear response of graded composites under an external alternating-current (AC) and direct-current (DC) electric field E_app = E₀ (1+sin ωt). The dielectric profile of the cylindrical inclusions is modeled by function ε_i (r) = C_k r^k (r ≤ a), where r is the radius of the cylindrical inclusion, and C_k, k, a are parameters. In the dilute limit, the local potentials and the effective nonlinear responses at all harmonics are derived. Meanwhile, the general effective nonlinear responses are also derived and compared with the effective nonlinear responses at harmonics under the AC and DC external field. It is found that the effective nonlinear AC and DC responses at harmonics can be calculated by those of the general effective nonlinear of the graded composites under the external DC electric field. Moreover, the obtained local electrical fields show that the electrical field distribution in the cylindrical inclusions is controllable, and the maximum of the electric field inside the cylinder is at its center.     

Second-Harmonic Response in Magnetic Nodal-Line Semimetal Fe3GeTe2

We experimentally investigate second-harmonic transverse voltage response to ac electrical current for a magnetic nodal-line semimetal Fe₃GeTe₂(FGT). For zero magnetic field, the observed second-harmonic voltage behaves as a square of the longitudinal current, as it should be expected for nonlinear Hall effect. The magnetic field behavior is found to be sophisticated: while the first-harmonic response shows the known anomalous Hall hysteresis in FGT, the second-harmonic Hal...     

Angle-dependent spin waves in antidot bilayers

Ferromagnetic resonance is introduced to examine the microwave frequency response of Ni Fe/Ir Mn bilayers, patterned as antidot arrays. In the experiment, field direction dependence on mode is obtained by rotating the applied magnetic field. We find that at a given resonance frequency, the dependence of the resonance field on the angle has a tendency of sinusoid/cosine variation in the experiment. From micromagnetic simulation it can be seen that spin waves are localized between dots from a given mode profile. This is caused by a demagnetization distribution with a larger value in the center of the two nearest dots than that of the next-nearest dots.     

Development of the relativistic backward wave oscillator with a permanent magnet

Firstly, an X-band relativistic backward wave oscillator with a low guiding magnetic field is simulated, whose output microwave power is 520 MW. Then, an experiment is carried out on an accelerator to investigate a relativistic backward wave oscillator with a permanent magnetic field whose strength is 0.46 T. When the energy of the electron is 630 keV and the current of the electron beam is 6.7 kA, a 15 ns width pulsed microwave with 510 MW output power at 8.0 GHz microwave frequency is achieved.     

Thermal entanglement in two-qutrit spin-1 anisotropic Heisenberg model with inhomogeneous magnetic field

The thermal entanglement of a two-qutrit spin-1 anisotropic Heisenberg XXZ chain in an inhomogeneous magnetic field is studied in detail. The effects of the external magnetic field (B), a parameter b which controls the inhomogeneity of B, and the bilinear interaction parameters J_{x=Jy≠Jz on the thermal variation of the negativity are studied in detail. It is found that negativity N decreases when the values of magnetic field, inhomogeneity b and temperature are increasing. In addition, N remains at higher temperatures for higher values of Jz and lower values of B and b.}     

A scanning superconducting quantum interference device microscope for room temperature samples

We have constructed a scanning low-T_c superconducting quantum interference device (SQUID) microscope, in which the SQUID is mounted on the lower end of a copper rod and cooled to liquid helium temperature. There is a 65μm thick sapphire window under the SQUID. The sample at room temperature underneath the window can be scanned to produce magnetic images. The microscope has a spatial resolution of 100－150μm and a magnetic field sensitivity of 3－60pT/$\sqrt{Hz}$ in a magnetically unshielded environment. We have used this scanning SQUID microscope to measure various room temperature samples.     

Magnetic hysteresis of the magnetoresistance and the critical current density in polycrystalline YBa2Cu3O7−δ–Ag superconductors

A systematic study of the magnetic hysteresis in transport properties of polycrystalline YBa₂Cu₃O_7−δ–Ag compounds has been made based on two kinds of measurements at 77 K and under applied magnetic fields up to 30 mT: critical current density J_c(B_a) and magnetoresistance R(B_a). The R(B_a) curves show a minimum in their decreasing branch occurring at B=B_min which was found to be both the excitation current I_ex and the maximum applied magnetic field B_am dependent. In addition, for a certain value of B_am>5 mT, we have observed that B_min increases with increasing I_ex and reaches a saturation value. The J_c(B_a) curves show a maximum in decreasing applied magnetic fields occurring at B=B_max. We have also found that B_max increases with increasing B_am and reaches a saturation value. The minimum in the R(B_a) and the maximum in J_c(B_a) curves were found to be related to the trapped flux within the grains. All the experimental results are discussed within the context of the flux dynamics and transport mechanisms in these high-T_c materials.     

Single-channel vector magnetic information detection method based on diamond NV color center

A method of detecting the single channel triaxial magnetic field information based on diamond nitrogen-vacancy (NV) color center is introduced. Firstly, the incident angle of the bias magnetic field which can achieve the equal frequency difference optically-detected magnetic resonance (ODMR) spectrum of diamond NV color center is calculated theoretically, and the triaxial magnetic information solution model is also constructed. Secondly, the microwave time-controlled circuit module is designed to generate equal timing and equal frequency difference microwave pulse signals in one channel. Combining with the optical detection magnetic resonance technology, the purpose of sequentially locking and detecting the four formant signals on one side of the diamond NV color center (m_s=-1 state signal) is achieved, and the vector magnetic field information detection is accomplished by combining the triaxial magnetic information solution model. The system can obtain magnetic field detection in a range of 0 mT-0.82 mT. The system's magnetic noise sensitivity is 14.2 nT/Hz^1/2, and the deviation angle errors of magnetic field detection θ_x and θ_y are 1.3^o and 8.2^o respectively.     

Microwave studies of the superconducting state in Rb3C60

Methods of electron-spin resonance (ESR) and direct, non-linear field-modulated microwave absorption (FMMA) were applied for the measurements in low- and high-purity samples of rubidium-doped fullerene, Rb₃C₆₀. The coexistence of the normal strong ESR signals and regular series of weak absorption lines similar to those seen in systems of Josephson junctions was observed in the high-purity sample. The possible influence of the vortex lattice on the ESR signals was also studied. We determined from FMMA investigations using the Portis model the critical field μ₀H^* = 40 μT, the depinning current density J_c^*(μ₀H₀ = 1 mT) 4 × 10⁸ A/m² in low magnetic field and J_c^*(μ₀H₀ > 100 mT) 1.6 × 10⁸ A/m² in higher fields. These values were generally one order of magnitude higher than the highest corresponding values previously observed in high-temperature superconductors (HTS's).     

Double-step behavior of critical current vs. magnetic field in Y-, Bi- and Tl-based bulk high-Tc superconductors

A double step characteristic is observed at 76 K in the transport critical current as a function of magnetic field (10^-4 T to 10 T) in bulk sintered Y-, Bi- and Tl-based high-T_c superconducting materials. The low-field, step-like drop in the critical current density J_c commences at magnetic fields B between about 0.3 and 2 mT. This is followed by a plateau region of relatively constant critical current extending from about 30 to 300 mT, and then a second drop at fields between about 0.3 and 10 T. These features occur for all three superconductor materials and are interpreted respectively as a self-field/weak-link regime, a remnant percolation path regime and a flux-flow/upper-critical-field regime. The sharpness of the transition of the voltage-current (V-I characteristic, represented by the transition parameter n (i.e., V∝Iⁿ), has a similar double-step shape as a function of magnetic field directly corresponding to the features of the J_c(B) characteristic.     

Experimental study of a plasma-filled backward wave oscillator

Experimental studies of a plasma-filled X-band backward-wave oscillator (BWO) are presented. Depending on the background gas pressure, microwave frequency upshifts of up to 1 GHz appeared along with an enhancement by a factor of 7 in the total microwave power emission. The bandwidth of the microwave emission increased from ⩽0.5 GHz to 2 GHz when the BWO was working at the RF power enhancement pressure region. The RF power enhancement appeared over a much wider pressure range in a high beam current case (10-100 mT for 3 kA) than in a lower beam case (80-115 mT for 1.6 kA). The plasma-filled BWO has higher power output than the vacuum BWO over a broader region of magnetic guide field strength. Trivelpiece-Gould modes (T-G modes) are observed with frequencies up to the background plasma frequency in a plasma-filled BWO. Mode competition between the T-G modes and the X-band Tm₀₁ mode prevailed when the background plasma density was below 6×10¹¹ cm^-3 . At a critical background plasma density of ≃8×10¹¹ cm^-3 power enhancement appeared in both X-band and the T-G modes. Power enhancement of the S-band in this mode collaboration region reached up to 8 dB. Electric fields measured by the Stark-effect method were as high as 34 kV/cm while the BWO power level was 80 MW. These electric fields lasted throughout the high-power microwave pulse     

Harmonic generation in TlBa2Ca3Cu4Oy superconductor

We have studied harmonic generation in the magnetic response of bulk samples of the ceramic superconductor TlBa₂Ca₃Cu₄O_y. Dependence of the odd and even harmonics of magnetization on the DC magnetic field, amplitude of the AC magnetic field and temperature was investigate experimentally. We have used a critical state model recently developed by Müller et al. to calculate the full harmonic response. At fixed temperature, the dependence of the odd order harmonic response on the amplitude of the AC magnetic field H_m shows an unambiguous crossover from an H²_m behaviour (Bean-like) at small amplitudes to an H³_m behaviour for larger H_m, in quantitative agreement with the modified critical state model.     

STRUCTURE AND MAGNETIC PROPERTIES OF NITRIDES R3Fe29-xCrxN4

A systematic investigation of nitrides R₃Fe_29-xCr_xN₄(R=Y, Ce, Nd, Sm, Gd, Tb, and Dy) has been performed. The nitrogen concentration in the nitride R₃Fe_29-xCr_xN_y was determined to be y=4. Nitrogenation leads to a relative volume expansion of about 5.3%. The lattice constants and unit cell volume decrease with in creasing rare earth atomic number from Nd to Dy, reflecting the lanthanide contraction. In average, the increase of Curie temperature upon nitrogenation is about 200 K, compared with its parent compound. The nitrogenation also results in a remarkable improvement in the saturation magnetization and anisotropy fields for R₃Fe_29-xCr_xN₄ at 4.2 K and room temperature, comp ared with their parent compounds. A spin reorientation of Nd₃Fe_24.5 Cr_4.5N₄ occurs at around 368 K, which is 138 K higher than that of Nd₃Fe_24.5Cr_4.5.Magnetohistory effects of R₃Fe_29-xCr_xN₄(R=Nd and Sm) are observed in a low field of 0.04 T. First order magneti zation process occurs in Sm₃Fe_24.0Cr_5.0N₄ in magnetic fields of around 3.0 T at 4.2 K. After nitrogenation the easy magnetization direction of Sm₃Fe_24.0Cr_5.0 is changed from the easy cone structure to the uniaxial. The excellent intrinsic magnetic properties of Sm₃Fe_24.0Cr_5.0N₄ make this compound a hopeful candidate for new high performance permanent magnets.     

磁致伸缩材料弱磁场响应特性的实验研究

针对磁致伸缩材料在弱磁场传感器领域的应用需要,采用迈克耳逊干涉原理实验测量了零应力条件下Tb-Dy-Fe材料和Fe-Ga合金的磁场响应灵敏度,以及不同应力下Fe-Ga合金的磁场响应特性和温度响应特性.实验结果表明：在零应力,外加磁场16 mT条件下,Fe-Ga合金的磁场响应灵敏度远高于Tb-Dy-Fe材料,更合适作为弱磁场传感器敏感材料;同时,在1.2 MPa预应力和26 mT偏置磁场下,Fe-Ga合金材料具有较好的磁场响应灵敏度和较大的饱和磁致伸缩系数,因而处在最佳工作状态.所得到的材料的磁场和温度响应曲线可作为弱磁场传感器参量设计的参考依据.     

Effective activation energy Ue(T,J,H) in textured Bi1.84Pb0.4Sr2Ca2Cu3Oy silver-clamped thick films

We have measured the resistivity of textured Bi_1.84Pb_0.4Sr₂Ca₂Cu₃O_y silver-clamped thick films as a function of temperature, current density ranging from 10 to 1×10³ A/cm² and magnetic field up to 0.3 T. We find that the effective activation energy U_e follows U_e(T,J,H)=U₀(1−T/T_p)^mln(J_c0/J)H⁻ with m=1.75 for Hab-plane and 2.5 for Hc-axis and =0.76 for Hab and 0.97 for Hc, for the current density regime above 100 A/cm², where T_p is a function of applied magnetic field and current density. This result suggests the effective activation energy U_e be correlated with the temperature, current density and magnetic field. The possible dissipative mechanisms responsible for the temperature, current density and magnetic field dependence of the effective activation energy are discussed.     

基于原子的射频识别标签近场散射场矢量测量

基于原子的时间/频率、长度以及磁场、微波电场等方面的量子精密测量近年来引起广泛关注。里德堡原子作为微波精密测量工具,具有可溯源性好、空间分辨率高以及探测灵敏度高等优势。通过室温铯里德堡原子的电磁诱导透明光谱特征分析实现了微波电场矢量空间高分辨测量。利用铯原子蒸气池中共线的耦合光和探测光形成了6S_1/2-6P_3/2-51D_5/2的阶梯型三能级系统,5.365 GHz微波电场将诱导相邻里德堡态51D_5/2-52P_3/2的共振跃迁,导致阶梯型三能级系统的电磁诱导透明光谱发生Autler-Townes分裂。通过计算光谱的分裂间隔可得到可溯源至普朗克常数的微波电场强度,微波电场测量的空间分辨率达到1/31被测微波波长。特别是提出一种新的微波电场极化方向测量方法,解决了基于里德堡原子进行微波电场极化方向测量时无法分辨互补角的问题。通过对射频识别标签的近场散射场进行矢量测量,实现了标签角度的有效识别,角度分辨率达到1.64°,测量结果与有限元分析方法仿真结果吻合地很好。该研究对于微波电场空间高分辨成像、射频识别标签的设计和识别以及电磁兼容测试等方面具有重要价值。