Differentiation between Shallow and Deep Charge Trap States on Single Poly(3‐hexylthiophene) Chains through Fluorescence Photon Statistics

Blinking of the photoluminescence (PL) emitted from individual conjugated polymer chains is one of the central observations made by single‐molecule spectroscopy (SMS). Important information, for example regarding excitation energy transfer, can be extracted by evaluating dynamic quenching. However, the nature of trap states, which are responsible for PL quenching, often remains obscured. We present a detailed investigation of the photon statistics of single poly(3‐hexylthiophene) (P3HT) chains obtained by SMS. The photon statistics provide a measure of the number and brightness of independently emitting areas on a single chain. These observables can be followed during blinking. A decrease in PL intensity is shown to be correlated with either 1) a decrease in the average brightness of the emitting sites; or 2) a decrease in the number of emitting regions. We attribute these phenomena to the formation of 1) shallow charge traps, which can weakly affect all emitting areas of a single chain at once; and 2) deep traps, which have a strong effect on small regions within the single chains.     

树状大分子保护的CdS纳米粒子的合成与表征

以聚酰胺-胺型树状大分子（PAMAM）为保护剂,在水溶液中制备了不同粒径的CdS纳米粒子,分别考察了PAMAM的代数以及保护剂与CdS物质的量比对CdS纳米粒子大小及荧光性能的影响.利用紫外-可见光谱、荧光光谱、透射电子显微镜对其光学性能和结构进行了表征.     

聚乙烯烷酮修饰CdS纳米微粒的制备及其光电转移特性

以聚乙烯烷酮（PVP）为修饰剂,制备了CdS纳米微粒。实验结果表明PVP与CdS纳米微粒间存在着强的相互作用,PVP和CdS纳米微粒的荧光都在很大程度上发生淬灭。其原因在于作为修饰剂的PVP与CdS纳米微粒子间发生了特殊缔合．受激时形成共振激发态,电子能量弛豫被延迟。     

NIR‐to‐NIR Two‐Photon Scanning Laser Microscopy Imaging of Single Nanoparticles Doped by YbIII Complexes

The photophysical and nonlinear optical properties of water‐soluble chromophore‐functionalised tris‐dipicolinate complexes [LnL₃]^3? (Ln=Yb and Nd) are thoroughly studied, revealing that only the Yb^III luminescence can be sensitized by a two‐photon excitation process. The stability of the complex in water is strongly enhanced by embedding in dispersible organosilicate nanoparticles (NPs). Finally, the spectroscopic properties of [NBu₄]₃[YbL₃] are studied in solution and in the solid state. The high brightness of the NPs allows imaging them as single objects using a modified two‐photon microscopy setup in a NIR‐to‐NIR configuration.     

单源前体合成水溶性的CdS和ZnS纳米晶

0引言量子点(QuantumDots)一般指半径小于或接近玻尔激子半径的半导体纳米晶颗粒。和有机染料分子相比,无机半导体纳米晶的带隙宽度可通过简单     

Factors Affecting Sensitivity and Stability of Polycyclic Aromatic Hydrocarbons Determined by Gas Chromatography Quadrupole Ion Trap Mass Spectrometry

Abstract

This study retrospectively analyzes the daily results of relative response factors (RRFs) of polycyclic aromatic hydrocarbons detected by gas chromatography–mass spectrometry (GC-MS). Although instrumental routine maintenance can enhance the reliability of measurement, there is no quantitative study to investigate the effects of glass liner contamination, manifold temperature drop, and column degradation on deteriorating sensitivities and stabilities of RRFs. This study demonstrates that by removing the contribution of outliners to the background level, great reductions of RRFs were achieved. Although several factors potentially undermined the analyzer's confidence on data reliability, there were no significant differences on the relative sensitivities of RRFs.     

Methane Activation by Platinum: Critical Role of Edge and Corner Sites of Metal Nanoparticles

Complete dehydrogenation of methane is studied on model Pt catalysts by means of state‐of‐the‐art DFT methods and by a combination of supersonic molecular beams with high‐resolution photoelectron spectroscopy. The DFT results predict that intermediate species like CH₃ and CH₂ are specially stabilized at sites located at particles edges and corners by an amount of 50–80 kJ mol^?1. This stabilization is caused by an enhanced activity of low‐coordinated sites accompanied by their special flexibility to accommodate adsorbates. The kinetics of the complete dehydrogenation of methane is substantially modified according to the reaction energy profiles when switching from Pt(111) extended surfaces to Pt nanoparticles. The CH₃ and CH₂ formation steps are endothermic on Pt(111) but markedly exothermic on Pt₇₉. An important decrease of the reaction barriers is observed in the latter case with values of approximately 60 kJ mol^?1 for first C? H bond scission and 40 kJ mol^?1 for methyl decomposition. DFT predictions are experimentally confirmed by methane decomposition on Pt nanoparticles supported on an ordered CeO₂ film on Cu(111). It is shown that CH₃ generated on the Pt nanoparticles undergoes spontaneous dehydrogenation at 100 K. This is in sharp contrast to previous results on Pt single‐crystal surfaces in which CH₃ was stable up to much higher temperatures. This result underlines the critical role of particle edge sites in methane activation and dehydrogenation.     

Preparation and Characterization of Size-Controlled Lignin Nanoparticles with Deep Eutectic Solvents by Nanoprecipitation

Lignin nanomaterials have wide application prospects in the fields of cosmetics delivery, energy storage, and environmental governance. In this study, we developed a simple and sustainable synthesis approach to produce uniform lignin nanoparticles (LNPs) by dissolving industrial lignin in deep eutectic solvents (DESs) followed by a self-assembling process. LNPs with high yield could be obtained through nanoprecipitation. The LNPs were characterized by dynamic light scattering (DLS), transmission electron microscopy (TEM), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and gel permeation chromatography (GPC). Distinct LNPs could be produced by changing the type of DES, lignin sources, pre-dropping lignin concentration, and the pH of the system. Their diameter is in the range of 20–200 nm and they show excellent dispersibility and superior long-term stability. The method of preparing LNPs from lignin–DES with water as an anti-solvent is simple, rapid, and environmentally friendly. The outcome aids to further the advancement of lignin-based nanotechnology.     

Sensitization of Photoconductivity in Polymeric Compositions with Fe2O3 and CdS Nanoparticles by an Organic Compound with Intramolecular Charge Transfer

The electric conductivity and photoconductivity of films based on polyvinylbutyral and containing Fe₂O₃ and CdS nanoparticles and an organic compound with intramolecular charge transfer as photoconductivity sensitizer in the visible and near infrared regions were investigated. In the absorption region of the sensitizer the activation energy of the photocurrent is somewhat greater than 0.1 eV and is close to the activation energy of the electric conductivity current.     

Tunneling Splittings in the S0 and S1 States of the Benzoic Acid Dimer Determined by High‐Resolution UV Spectroscopy

Five different isotopologues of the benzoic acid dimer and a vibronic band located 57 cm^?1 above the electronic origin, which is assigned to the out‐of‐plane butterfly motion, are studied by rotationally resolved UV spectroscopy. From these measurements a ground‐state structure with C_2h symmetry is deduced, whereas the symmetry is lowered to C_s in the S₁ state. The increase in the center‐of‐mass distance between the two monomers that is found on electronic excitation indicates a decrease in hydrogen‐bond strength. The tunneling splittings in the S₀ and S₁ states are 1385.2±0.7 and 271.2±0.7 MHz, respectively, corresponding to an increase in barrier height by 7.2 % on electronic excitation.     

Visible‐Light‐Induced Generation of H2 by Nanocomposites of Few‐Layer TiS2 and TaS2 with CdS Nanoparticles

Graphene analogues of TaS₂ and TiS₂ (3–4 layers), prepared by Li intercalation followed by exfoliation in water, were characterized. Nanocomposites of CdS with few‐layer TiS₂ and TaS₂ were employed for the visible‐light‐induced H₂ evolution reaction (HER). Benzyl alcohol was used as the sacrificial electron donor, which was oxidized to benzaldehyde during the reaction. Few‐layer TiS₂ is a semiconductor with a band gap of 0.7 eV, and its nanocomposite with CdS showed an activity of 1000 μmol h^?1 g^?1_. The nanocomposite of few‐layer TaS₂, in contrast, gave rise to higher activity of 2320 μmol h^?1 g^?1, which was attributed to the metallic nature of few‐layer TaS₂. The amount of hydrogen evolved after 20 and 16 h for the CdS/TiS₂ and CdS/TaS₂ nanocomposites was 14833 and 28132 μmol, respectively, with turnover frequencies of 0.24 and 0.57 h^?1, respectively.     

基于纳米CdS对尿酸的光催化氧化和铜(Ⅱ)配合物对氧的电催化还原的燃料电池性能

以纳米硫化镉薄膜修饰的铟锡氧化物电极(CdS/ITO)作光阳极, 铜(Ⅱ)配合物[Cu(phen)(L-Trp)·(H₂O)]⁺(phen=1,10-菲啰啉, L-Trp=L-色氨酸)修饰单壁碳纳米管(SWCNTs)电极作阴极, 构建了光催化尿酸(UA)燃料电池, 并研究了其性能及热处理温度的影响. 结果表明, 在40 ℃以下获得的纳米CdS修饰电极在320~550 nm波长区间显现明显的吸收和光伏响应, 在可见光辐射下能光催化氧化UA; 较高温度的热处理(200~300 ℃)却降低了纳米CdS对UA的光催化氧化活性. [Cu(phen)(L-Trp)(H₂O)]⁺/SWCNTs电极在-0.131 V电位下呈现一对准可逆的氧化还原峰, 并能电催化还原O₂和H₂O₂. 此外, 基于UA在CdS/ITO电极上的光催化氧化及O₂在[Cu(phen)(L-Trp)(H₂O)]⁺/SWCNTs电极上的电催化还原, 组装了UA(0.2 mmol/L)燃料电池, 其在可见光照射(0.18 mW/cm²)下产生0.52 V开路电压, 13.08 μA/cm²短路光电流, 在0.41 V下呈现的最大功率密度为4.10 μW/cm².     

Extraction and Analysis of Six Effective Components in Glycyrrhiza uralensis Fisch by Deep Eutectic Solvents (DES) Combined with Quantitative Analysis of Multi-Components by Single Marker (QAMS) Method

Deep eutectic solvents (DESs) are green organic solvents that have broad prospects in the extraction of effective components of traditional Chinese medicine. This work employed the quantitative analysis of multi-components by a single marker (QAMS) method to quantitatively determine the six effective components of glycyrrhizic acid, liquiritin, isoliquiritin apioside, liquiritigenin, isoliquiritin, and glycyrrhetinic acid in Glycyrrhiza uralensis, which was used for comprehensive evaluation of the optimal extraction process by DESs. First, Choline Chloride: Lactic Acid (ChCl-LA, molar ratio 1:1) was selected as the most suitable DES by comparing the extraction yields of different DESs. Second, the extraction protocol was investigated by extraction time, extraction temperature, liquid-to-material ratio, molar ratio, and ultrasonic power. The Box–Behnken design (BBD) combined with response surface methodology (RSM) was used to investigate the optimal DES conditions. The result showed that the best DES system was 1.3-butanediol/choline chloride (ChCl) with the molar ratio of 4:1. The optimal extraction process of licorice was 20 mL/g, the water content was 30%, and the extraction time was 41 min. The comprehensive impact factor (z) was 0.92. At the same time, it was found that the microstructure of the residue extracted by the eutectic solvent was more severely damaged than the residue after the traditional solvent extraction through observation under an electron microscope. The DES has the characteristics of high efficiency and rapidity as an extraction solution.