Determination of the C4-H bond dissociation energies of NADH models and their radical cations in acetonitrile

Heterolytic and homolytic bond dissociation energies of the C4-H bonds in ten NADH models (seven 1,4-dihydronicotinamide derivatives, two Hantzsch 1,4-dihydropyridine derivatives, and 9,10-dihydroacridine) and their radical cations in acetonitrile were evaluated by titration calorimetry and electrochemistry, according to the four thermodynamic cycles constructed from the reactions of the NADH models with N,N,N',N'-tetramethyl-p-phenylenediamine radical cation perchlorate in acetonitrile (note: C9-H bond rather than C4-H bond for 9,10-dihydroacridine; however, unless specified, the C9-H bond will be described as a C4-H bond for convenience). The results show that the energetic scales of the heterolytic and homolytic bond dissociation energies of the C4-H bonds cover ranges of 64.2-81.1 and 67.9-73.7 kcal mol(-1) for the neutral NADH models, respectively, and the energetic scales of the heterolytic and homolytic bond dissociation energies of the (C4-H)(.+) bonds cover ranges of 4.1-9.7 and 31.4-43.5 kcal mol(-1) for the radical cations of the NADH models, respectively. Detailed comparison of the two sets of C4-H bond dissociation energies in 1-benzyl-1,4-dihydronicotinamide (BNAH), Hantzsch 1,4-dihydropyridine (HEH), and 9,10-dihydroacridine (AcrH(2)) (as the three most typical NADH models) shows that for BNAH and AcrH(2), the heterolytic C4-H bond dissociation energies are smaller (by 3.62 kcal mol(-1)) and larger (by 7.4 kcal mol(-1)), respectively, than the corresponding homolytic C4-H bond dissociation energy. However, for HEH, the heterolytic C4-H bond dissociation energy (69.3 kcal mol(-1)) is very close to the corresponding homolytic C4-H bond dissociation energy (69.4 kcal mol(-1)). These results suggests that the hydride is released more easily than the corresponding hydrogen atom from BNAH and vice versa for AcrH(2), and that there are two almost equal possibilities for the hydride and the hydrogen atom transfers from HEH. Examination of the two sets of the (C4-H)(.+) bond dissociation energies shows that the homolytic (C4-H)(.+) bond dissociation energies are much larger than the corresponding heterolytic (C4-H)(.+) bond dissociation energies for the ten NADH models by 23.3-34.4 kcal mol(-1); this suggests that if the hydride transfer from the NADH models is initiated by a one-electron transfer, the proton transfer should be more likely to take place than the corresponding hydrogen atom transfer in the second step. In addition, some elusive structural information about the reaction intermediates of the NADH models was obtained by using Hammett-type linear free-energy analysis.     

Equilibrium thermodynamic studies in water: reactions of dihydrogen with rhodium(III) porphyrins relevant to Rh-Rh, Rh-H, and Rh-OH bond energetics

Aqueous solutions of rhodium(III) tetra p-sulfonatophenyl porphyrin ((TSPP)Rh(III)) complexes react with dihydrogen to produce equilibrium distributions between six rhodium species including rhodium hydride, rhodium(I), and rhodium(II) dimer complexes. Equilibrium thermodynamic studies (298 K) for this system establish the quantitative relationships that define the distribution of species in aqueous solution as a function of the dihydrogen and hydrogen ion concentrations through direct measurement of five equilibrium constants along with dissociation energies of D(2)O and dihydrogen in water. The hydride complex ([(TSPP)Rh-D(D(2)O)](-4)) is a weak acid (K(a)(298 K) = (8.0 +/- 0.5) x 10(-8)). Equilibrium constants and free energy changes for a series of reactions that could not be directly determined including homolysis reactions of the Rh(II)-Rh(II) dimer with water (D(2)O) and dihydrogen (D(2)) are derived from the directly measured equilibria. The rhodium hydride (Rh-D)(aq) and rhodium hydroxide (Rh-OD)(aq) bond dissociation free energies for [(TSPP)Rh-D(D(2)O)](-4) and [(TSPP)Rh-OD(D(2)O)](-4) in water are nearly equal (Rh-D = 60 +/- 3 kcal mol(-1), Rh-OD = 62 +/- 3 kcal mol(-1)). Free energy changes in aqueous media are reported for reactions that substitute hydroxide (OD(-)) (-11.9 +/- 0.1 kcal mol(-1)), hydride (D(-)) (-54.9 kcal mol(-1)), and (TSPP)Rh(I): (-7.3 +/- 0.1 kcal mol(-1)) for a water in [(TSPP)Rh(III)(D(2)O)(2)](-3) and for the rhodium hydride [(TSPP)Rh-D(D(2)O)](-4) to dissociate to produce a proton (9.7 +/- 0.1 kcal mol(-1)), a hydrogen atom (approximately 60 +/- 3 kcal mol(-1)), and a hydride (D(-)) (54.9 kcal mol(-1)) in water.     

Hydrogen bonding of the nucleobase mimic 2-pyridone to fluorobenzenes: an ab initio investigation

The hydrogen-bonded complexes of the nucleobase mimic 2-pyridone (2PY) with seven different fluorinated benzenes (1-, 1,2-, 1,4-, 1,2,3-, 1,3,5-, 1,2,3,4-, and 1,2,4,5-fluorobenzene) are important model systems for investigating the relative importance of hydrogen bonding versus pi-stacking interactions in DNA. We have shown by supersonic-jet spectroscopy that these dimers are hydrogen bonded and not pi-stacked at low temperature (Leist, R.; Frey, J. A.; Leutwyler, S. J. Phys. Chem. A 2006, 110, 4180). Their geometries and binding energies D(e) were calculated using the resolution of identity (RI) M?ller-Plesset second-order perturbation theory method (RIMP2). The most stable dimers are bound by antiparallel N-H...F-C and C-H...O=C hydrogen bonds. The binding energies are extrapolated to the complete basis set (CBS) limit, , using the aug-cc-pVXZ basis set series. The CBS binding energies range from -D(e,CBS) = 6.4-6.9 kcal/mol and the respective dissociation energies from -D(0,CBS) = 5.9-6.3 kcal/mol. In combination with experiment, the latter represent upper limits to the dissociation energies of the pi-stacked isomers (which are not observed experimentally). The individual C-H...O=C and N-H...F-C contributions to D(e) can be approximately separated. They are nearly equal for 2PY.fluorobenzene; each additional F atom strengthens the C-H...O=C hydrogen bond by approximately 0.5 kcal/mol and weakens the C-F...H-N hydrogen bond by approximately 0.3 kcal/mol. The single H-bond strengths and lengths correlate with the gas-phase acid-base properties of the C-H and C-F groups of the fluorobenzenes.     

Mechanism of the hydration of carbon dioxide: direct participation of H2O versus microsolvation

Thermochemical parameters of carbonic acid and the stationary points on the neutral hydration pathways of carbon dioxide, CO 2 + nH 2O --> H 2CO 3 + ( n - 1)H 2O, with n = 1, 2, 3, and 4, were calculated using geometries optimized at the MP2/aug-cc-pVTZ level. Coupled-cluster theory (CCSD(T)) energies were extrapolated to the complete basis set limit in most cases and then used to evaluate heats of formation. A high energy barrier of approximately 50 kcal/mol was predicted for the addition of one water molecule to CO 2 ( n = 1). This barrier is lowered in cyclic H-bonded systems of CO 2 with water dimer and water trimer in which preassociation complexes are formed with binding energies of approximately 7 and 15 kcal/mol, respectively. For n = 2, a trimeric six-member cyclic transition state has an energy barrier of approximately 33 (gas phase) and a free energy barrier of approximately 31 (in a continuum solvent model of water at 298 K) kcal/mol, relative to the precomplex. For n = 3, two reactive pathways are possible with the first having all three water molecules involved in hydrogen transfer via an eight-member cycle, and in the second, the third water molecule is not directly involved in the hydrogen transfer but solvates the n = 2 transition state. In the gas phase, the two transition states have comparable energies of approximately 15 kcal/mol relative to separated reactants. The first path is favored over in aqueous solution by approximately 5 kcal/mol in free energy due to the formation of a structure resembling a (HCO 3 (-)/H 3OH 2O (+)) ion pair. Bulk solvation reduces the free energy barrier of the first path by approximately 10 kcal/mol for a free energy barrier of approximately 22 kcal/mol for the (CO 2 + 3H 2O) aq reaction. For n = 4, the transition state, in which a three-water chain takes part in the hydrogen transfer while the fourth water microsolvates the cluster, is energetically more favored than transition states incorporating two or four active water molecules. An energy barrier of approximately 20 (gas phase) and a free energy barrier of approximately 19 (in water) kcal/mol were derived for the CO 2 + 4H 2O reaction, and again formation of an ion pair is important. The calculated results confirm the crucial role of direct participation of three water molecules ( n = 3) in the eight-member cyclic TS for the CO 2 hydration reaction. Carbonic acid and its water complexes are consistently higher in energy (by approximately 6-7 kcal/mol) than the corresponding CO 2 complexes and can undergo more facile water-assisted dehydration processes.     

A new database and benchmark of the bond energies of noble-gas-containing molecules

We have developed a new database of structures and bond energies of 59 noble-gas-containing molecules. The structures were calculated by CCSD(T)/aug-cc-pVTZ methods and the bond energies were obtained using the CCSD(T)/complete basis set method. Many wavefunction-based and density functional theory methods have been benchmarked against the 59 accurate bond energies. Our results show that the MPW1B95, B2GP-PLYP, and DSD-BLYP functionals with the aug-cc-pVTZ basis set excel in predicting the bond energies of noble-gas molecules with mean unsigned errors (MUEs) of 2.0 to 2.1 kcal/mol. When combinations of Dunning's basis sets are used, the MPW1B95, B2GP-PLYP, DSD-BLYP, and BMK functionals give significantly lower MUEs of 1.6 to 1.9 kcal/mol. Doubly hybrid methods using B2GP-PLYP and DSD-BLYP functionals and MP2 calculation also provide satisfactory accuracy with MUEs of 1.4 to 1.5 kcal/mol. If the Ng bond energies and the total atomization energies of a group of 109 main-group molecules are considered at the same time, the MPW1B95/aug-cc-pVTZ single-level method (MUE = 2.7 kcal/mol) and the B2GP-PLYP and DSD-PLYP functionals with combinations of basis sets or using the doubly hybrid method (MUEs = 1.9-2.2 kcal/mol) give the overall best result.     

Visualizing internal stabilization in weakly bound systems using atomic energies: hydrogen bonding in small water clusters

Atomic energies are used to visualize the local stabilizing and destabilizing energy changes in water clusters. Small clusters, (H(2)O)(n), from n = 2-5, at MP2/aug-cc-pVTZ geometries are evaluated using energies defined by the quantum theory of atoms in molecules (QTAIM). The atomic energies reproduce MP2 total energies to within 0.005 kcal mol(-1). Oxygen atoms are stabilized for all systems and hydrogen atoms are destabilized. The increased stability of the water clusters due to hydrogen bond cooperativity is demonstrated at an atomic level. Variations in atomic energies within the clusters are correlated to the geometry of the waters and reveal variations in the hydrogen bond strengths. The method of visualization of the energy changes applied here is especially suited for application to large biomolecules.     

Intramolecular hydrogen bonding and cooperative interactions in carbohydrates via the molecular tailoring approach

In spite of many theoretical and experimental attempts for understanding intramolecular hydrogen bonding (H-bonding) in carbohydrates, a direct quantification of individual intramolecular H-bond energies and the cooperativity among the H-bonded networks has not been reported in the literature. The present work attempts, for the first time, a direct estimation of individual intramolecular O-H...O interaction energies in sugar molecules using the recently developed molecular tailoring approach (MTA). The estimated H-bond energies are in the range of 1.2-4.1 kcal mol(-1). It is seen that the OH...O equatorial-equatorial interaction energies lie between 1.8 and 2.5 kcal mol(-1), with axial-equatorial ones being stronger (2.0-3.5 kcal mol(-1)). The strongest bonds are nonvicinal axial-axial H-bonds (3.0-4.1 kcal mol(-1)). This trend in H-bond energies is in agreement with the earlier reports based on the water-water H-bond angle, solvent-accessible surface area (SASA), and (1)H NMR analysis. The contribution to the H-bond energy from the cooperativity is also estimated using MTA. This contribution is seen to be typically between 0.1 and 0.6 kcal mol(-1) when H-bonds are a part of a relatively weak equatorial-equatorial H-bond network and is much higher (0.5-1.1 kcal mol(-1)) when H-bonds participate in an axial-axial H-bond network.     

Intramolecular and intermolecular contributions to the barriers for rotation of methyl groups in crystalline solids: electronic structure calculations and solid-state NMR relaxation measurements

The rotation barriers for 10 different methyl groups in five methyl-substituted phenanthrenes and three methyl-substituted naphthalenes were determined by ab initio electronic structure calculations, both for the isolated molecules and for the central molecules in clusters containing 8-13 molecules. These clusters were constructed computationally using the carbon positions obtained from the crystal structures of the eight compounds and the hydrogen positions obtained from electronic structure calculations. The calculated methyl rotation barriers in the clusters (E(clust)) range from 0.6 to 3.4 kcal/mol. Solid-state (1)H NMR spin-lattice relaxation rate measurements on the polycrystalline solids gave experimental activation energies (E(NMR)) for methyl rotation in the range from 0.4 to 3.2 kcal/mol. The energy differences E(clust) - E(NMR) for each of the ten methyl groups range from -0.2 kcal/mol to +0.7 kcal/mol, with a mean value of +0.2 kcal/mol and a standard deviation of 0.3 kcal/mol. The differences between each of the computed barriers in the clusters (E(clust)) and the corresponding computed barriers in the isolated molecules (E(isol)) provide an estimate of the intermolecular contributions to the rotation barriers in the clusters. The values of E(clust) - E(isol) range from 0.0 to 1.0 kcal/mol.     

Toward modeling H-NOX domains: a DFT study of heme-NO complexes as hydrogen bond acceptors

Density functional theory calculations (PW91/STO-TZP, including basis-set superposition error corrections) have been used to evaluate hydrogen bond energies of five- and six-coordinate heme-NO complexes with phenol and imidazole, chosen as models for distal pocket tyrosine and histidine residues. The calculated interaction energies are approximately 2 kcal/mol for phenol and 3-4 kcal/mol for imidazole, which are 2-4 times smaller than the energies calculated for heme-O(2) complexes hydrogen-bonding with a distal histidine. Interestingly, the hydrogen bond energies are found to be very similar for five- and six-coordinate heme-NO complexes, which may be viewed as contrary to the interpretation of a recent observation on a bacterial H-NOX (Heme-Nitric oxide/OXygen-binding) protein with sequence homology to mammalian-soluble guanylate cyclase.     

Determination of the electron affinities of alpha- and beta-naphthyl radicals using the kinetic method with full entropy analysis. The C-H bond dissociation energies of naphthalene.

The C - H bond dissociation energies for naphthalene were determined using a negative ion thermochemical cycle involving the gas-phase acidity (Delta H (acid)) and electron affinity (EA) for both the alpha- and beta-positions. The gas-phase acidity of the naphthalene alpha- and beta-positions and the EAs of the alpha- and beta-naphthyl radicals were measured in the gas phase in a flowing after glow-triple quadrupole apparatus. A variation of the Cooks kinetic method was used to measure the EAs of the naphthyl radicals by collision-induced dissociation of the corresponding alpha- and beta-naphthylsulfinate adducts formed by reactions in the flow tube portion of the instrument. Calibration references included both pi and sigma radicals, and full entropy analysis was performed over a series of calibration curves measured at collision energies ranging from 3.5 to 8 eV (center-of-mass). The measured EAs are 33.0 +/- 1.4 and 31.4 +/- 1.0 kcal mol(-1) (1 kcal = 4.184 kJ) for the alpha- and beta-naphthyl radicals, respectively. The gas-phase acidities for naphthalene were measured by the DePuy silane cleavage method, which utilizes the relative abundances of aryldimethylsiloxides and trimethylsiloxide that result from competitive cleavages from a proposed penta coordinate hydroxysiliconate intermediate. The measured acidities are 394.0 +/- 5.0 and 397.6 +/- 4.8 kcal mol(-1) for the alpha- and beta- positions, respectively. The C - H bond dissociation energies calculated from the thermochemical cycle are 113.4 +/- 5.2 and 115.4 +/- 4.9 kcal mol(-1) for the alpha- and beta-positions, respectively. These energies are, to within experimental error, indistinguishable and are approximately the same as the first bond dissociation energy for benzene.     

Photophysical studies of the trans to cis isomerization of the push-pull molecule: 1-(pyridin-4-yl)-2-(N-methylpyrrol-2-yl)ethene (mepepy)

Organic molecules possessing intramolecular charge-transfer properties (D-pi-A type molecules) are of key interest particularly in the development of new optoelectronic materials as well as photoinduced magnetism. One such class of D-pi-A molecules that is of particular interest contains photoswitchable intramolecular charge-transfer states via a photoisomerizable pi-system linking the donor and acceptor groups. Here we report the photophysical and electronic properties of the trans to cis isomerization of 1-(pyridin-4-yl)-2-(N-methylpyrrol-2-yl)ethene ligand (mepepy) in aqueous solution using photoacoustic calorimetry (PAC) and theoretical methods. Density functional theory (DFT) calculations demonstrate a global energy difference between cis and trans isomers of mepepy to be 8 kcal mol(-1), while a slightly lower energy is observed between the local minima for the trans and cis isomers (7 kcal mol(-1)). Interestingly, the trans isomer appears to exhibit two ground-state minima separated by an energy barrier of approximately 9 kcal mol(-1). Results from the PAC studies indicate that the trans to cis isomerization results in a negligible volume change (0.9 +/- 0.4 mL mol(-1)) and an enthalpy change of 18 +/- 3 kcal mol(-1). The fact that the acoustic waves associated with the trans to cis transition of mepepy overlap in frequency with those of a calorimetric reference implies that the conformational transition occurs faster than the approximately 50 ns response time of the acoustic detector. Comparison of the experimental results with theoretical studies provide evidence for a mechanism in which the trans to cis isomerization of mepepy results in the loss of a hydrogen bond between a water molecule and the pyridine ring of mepepy.     

Polarization charge densities provide a predictive quantification of hydrogen bond energies

A systematic density functional theory based study of hydrogen bond energies of 2465 single hydrogen bonds has been performed. In order to be closer to liquid phase conditions, different from the usual reference state of individual donor and acceptor molecules in vacuum, the reference state of donors and acceptors embedded in a perfect conductor as simulated by the COSMO solvation model has been used for the calculation of the hydrogen bond energies. The relationship between vacuum and conductor reference hydrogen bond energies is investigated and interpreted in the light of different physical contributions, such as electrostatic energy and dispersion. A very good correlation of the DFT/COSMO hydrogen bond energies with conductor polarization charge densities of separated donor and acceptor atoms was found. This provides a method to predict hydrogen bond strength in solution with a root mean square error of 0.36 kcal mol(-1) relative to the quantum chemical dimer calculations. The observed correlation is broadly applicable and allows for a predictive quantification of hydrogen bonding, which can be of great value in many areas of computational, medicinal and physical chemistry.     

Comparison of SCC-DFTB and NDDO-based semiempirical molecular orbital methods for organic molecules

Extensive testing of the SCC-DFTB method has been performed, permitting direct comparison to data available for NDDO-based semiempirical methods. For 34 diverse isomerizations of neutral molecules containing the elements C, H, N, and O, the mean absolute errors (MAE) for the enthalpy changes are 2.7, 3.2, 5.0, 5.1, and 7.2 kcal/mol from PDDG/PM3, B3LYP/6-31G(d), PM3, SCC-DFTB, and AM1, respectively. A more comprehensive test was then performed by computing heats of formation for 622 neutral, closed-shell H, C, N, and O-containing molecules; the MAE of 5.8 kcal/mol for SCC-DFTB is intermediate between AM1 (6.8 kcal/mol) and PM3 (4.4 kcal/mol) and significantly higher than for PDDG/PM3 (3.2 kcal/mol). Similarly, SCC-DFTB is found to be less accurate for heats of formation of ions and radicals; however, it is more accurate for conformational energetics and intermolecular interaction energies, though none of the methods perform well for hydrogen bonds with strengths under ca. 7 kcal/mol. SCC-DFTB and the NDDO methods all reproduce MP2/cc-pVTZ molecular geometries with average errors for bond lengths, bond angles, and dihedral angles of only ca. 0.01 A, 1.5 degrees , and 3 degrees . Testing was also carried out for sulfur containing molecules; SCC-DFTB currently yields much less accurate heats of formation in this case than the NDDO-based methods due to the over-stabilization of molecules containing an SO bond.     

Hypervalency avoided: simple substituted BrF3 and BrF5 molecules. Structures, thermochemistry, and electron affinities of the bromine hydrogen fluorides HBrF2 and HBrF4

Five different pure density functional theory (DFT) and hybrid Hartree-Fock/DFT methods have been used to search for the molecular structures, thermochemistry, and electron affinities of the bromine hydrogen fluorides HBrF(n)/HBrF(n)(-) (n = 2, 4). The basis sets used in this work are of double-zeta plus polarization quality in conjunction with s- and p-type diffuse functions, labeled as DZP++. Structures with Br-F and Br-H normal bonds, that is, HBrF(2)/HBrF(2)(-) with C(2v) or C(s) symmetry and HBrF(4)/HBrF(4)(-) with C(4v) or C(s) symmetry, are genuine minima. However, unlike the original BrF(3) and BrF(5) molecules, the global minima for HBrF(n)/HBrF(n)(-) (n = 2, 4) species are predicted to be complexes, some of which contain hydrogen bonds. The demise of the hypervalent structures is due to the availability of favorable dissociation products involving HF, which has a much larger dissociation energy than F(2). Similar reasoning suggests that PF(4)H, SF(3)H, SF(5)H, ClF(2)H, ClF(4)H, AsF(4)H, SeF(3)H, and SeF(5)H will all be hydrogen bond structures incorporating diatomic HF. The most reasonable theoretical values of the adiabatic electron affinities (EA(ad)) are 3.69 (HBrF(2)) and 4.38 eV (HBrF(4)) with the BHLYP method. These electron affinities are comparable to those of the analogous molecules: Br(2)F(n), ClBrF(n), and BrF(n)(+1) systems. The first F-atom dissociation energies for the neutral global minima are 60 (HBrF(2)) and 49 kcal/mol (HBrF(4)) with the B3LYP method. The first H-atom dissociation energies for the same systems are 109 (HBrF(2)) and 116 kcal/mol (HBrF(4)). The large Br-H bond energies are not sufficient to render the hypervalent structures energetically tenable. The dissociation energies for the complexes to their fragments are relatively small.     

Theoretical study of (CH...C)- hydrogen bonds in CH(4-n)X(n) (X = F, Cl; n = 0, 1, 2) systems complexed with their homoconjugate and heteroconjugate carbanions

This work deals with a theoretical study of the (CH...C)- hydrogen bonds in CH4, CH3X, and CH2X2 (X = F, Cl) complexed with their homoconjugate and heteroconjugate carbanions. The properties of the complexes are calculated with the B3LYP method using the 6-311++G(d,p) or 6-311++G(2df,2p) basis sets. The deprotonation enthalpies (DPE) of the CH bond or the proton affinities of the carbanions (PA(C-) are calculated as well. All the systems with the exception of the CH4...CHCl2(-) one are characterized by a double minimum potential. In some of the complexes, the (CH(b)...C)- hydrogen bond is linear. In other systems, such as CH3F...CH2F- and CH3F...CHF2(-), there is a large departure from linearity, the systems being stabilized by electrostatic interactions between the nonbonded H of the neutral molecule and the F atom of the carbanion. In the transition state, the (CH(b)...C)- bond is linear, and there is a large contraction of the intermolecular C...C distance. The binding energies vary within a large range, from -1.4 to -11.1 kcal mol(-1) for the stable complexes and -8.6 to -44.1 kcal mol(-1) for the metastable complexes. The energy barriers to proton transfer are between 5 and 20 kcal mol(-1) for the heteroconjugate systems and between 3.8 and 8.3 kcal mol(-1) for the homoconjugate systems. The binding energies of the linear complexes depend exponentially on 1.5DPE - PA(C-), showing that the proton donor is more important than the proton acceptor in determining hydrogen bond strength. The NBO analysis indicates an important electronic reorganization in the two partners. The elongations of the CH bond resulting from the interaction with the carbanion depend on the occupation of the sigma*(CH(b)) antibonding orbitals and on the hybridization of the C bonded to H(b). The frequency shifts of the nu(CH)(A1) stretching vibration range between 15 and 1150 cm(-1). They are linearly correlated to the elongation of the CH(b) bond.     

Cheletropic decomposition of cyclic nitrosoamines revisited: the nature of the transition states and a critical role of the ring strain

The cheletropic decompositions of 1-nitrosoaziridine (1), 1-nitroso-Delta(3)-pyrroline (2), 7-nitroso-7-azabicyclo[2.2. 1]hepta-2,5-diene (3), and 6-nitroso-6-azabicyclo[2.1.1]hexa-4-ene (4) have been studied theoretically using high level ab initio computations. Activation parameters of the decomposition of nitrosoaziridine 1 were obtained experimentally in heptane (DeltaH()(298) = 18.6 kcal mol(-)(1), DeltaS()(298) = -7.6 cal mol(-)(1) K(-)(1)) and methanol (20.3 kcal mol(-)(1), 0.3 cal mol(-)(1) K(-)(1)). Among employed theoretical methods (B3LYP, MP2, CCD, CCSD(T)//CCD), the B3LYP method in conjunction with 6-31+G, 6-311+G, and 6-311++G(3df,2pd) basis sets gives the best agreement with experimental data. It was found that typical N-nitrosoheterocycles 2-4 which have high N-N bond rotation barriers (>16 kcal mol(-)(1)) extrude nitrous oxide via a highly asynchronous transition state with a planar ring nitrogen atom. Nitrosoaziridine 1, with a low rotation barrier (<9 kcal mol(-)(1)) represents a special case. This compound can eliminate N(2)O via a low energy linear synperiplanar transition state (DeltaH()(298) = 20.6 kcal mol(-)(1), DeltaS()(298) = 2.5 cal mol(-)(1) K(-)(1)). Two higher energy transition states are also available. The B3LYP activation barriers of the cheletropic fragmentation of nitrosoheterocycles 2-4 decrease in the series: 2 (58 kcal mol(-)(1)) > 3 (18 kcal mol(-)(1)) > 4 (12) kcal mol(-)(1). The relative strain energies increase in the same order: 2 (0 kcal mol(-)(1)) < 3 (39 kcal mol(-)(1)) < 4 (52 kcal mol(-)(1)). Comparison of the relative energies of 2-4 and their transition states on a common scale where the energy of nitrosopyrroline 2 is assumed as reference indicates that the thermal stability of the cyclic nitrosoamines toward cheletropic decomposition is almost entirely determined by the ring strain.     

Nature of one-dimensional short hydrogen bonding: bond distances, bond energies, and solvent effects

On the basis of recently synthesized calix[4]hydroquinone (CHQ) nanotubes which were self-assembled with infinitely long one-dimensional (1-D) short hydrogen bonds (SHB), we have investigated the nature of 1-D SHB using first-principles calculations for all the systems including the solvent water. The H-bonds relay (i.e., contiguous H-bonds) effect in CHQs shortens the H...O bond distances significantly (by more than 0.2 A) and increases the bond dissociation energy to a large extent (by more than approximately 4 kcal/mol) due to the highly enhanced polarization effect along the H-bond relay chain. The H-bonds relay effect shows a large increase in the chemical shift associated with the SHB. The average binding energies for the infinite 1-D H-bond arrays of dioles and dions increase by approximately 4 and approximately 9 kcal/mol per H-bond, respectively. The solvent effect (due to nonbridging water molecules) has been studied by explicitly adding water molecules in the CHQ tube crystals. This effect is found to be small with slight weakening of the SHB strength; the H...O bond distance increases only by 0.02 A, and the average binding energy decreases by approximately 1 kcal/mol per H-bond. All these results based on the first-principles calculations are the first detailed analysis of energy gain by SHB and energy loss by solvent effect, based on a partitioning scheme of the interaction energy components. These reliable results elucidate not only the self-assembly phenomena based on the H-bond relay but also the solvent effect on the SHB strength.     

A critical evaluation of the factors determining the effect of intramolecular hydrogen bonding on the O-H bond dissociation enthalpy of catechol and of flavonoid antioxidants

New experimental results on the determination of the bond dissociation enthalpy (BDE) value of 3,5-di-tert-butylcatechol, a model compound for flavonoid antioxidants, by the EPR radical equilibration technique are reported. By measurement of the equilibrium constant for the reaction between 3,5-di-tert-butylcatechol and the 2,6-di-tert-butyl-4-methylphenoxyl radical, in UV irradiated isooctane solutions at different temperatures, it has been shown that the thermodynamic parameters for this reaction are DeltaH degrees = -2.8+/-0.1 kcal mol(-1) and DeltaS degrees = +1.3+/-0.2 cal mol(-1) K(-1). This demonstrates that the entropic variations in the hydrogen exchange reaction between phenols and the corresponding phenoxyl radicals are also negligible when one of the reacting species is a polyphenol and that the EPR radical equilibration technique also allows the determination of the Obond;H BDEs in intramolecularly hydrogen-bonded polyphenols. The BDE of 3,5-di-tert-butylcatechol (78.2 kcal mol(-1)) was determined to be identical to that of alpha-tocopherol. Through use of the group additivity rule, this piece of data was also used to calculate the strength of the intramolecular hydrogen bond between the hydroxyl proton and the oxygen radical centre in the corresponding semiquinone radical (5.6 kcal mol(-1)), which is responsible both for the excellent antioxidant properties of catechols and for the BDE of catechol (81.8 kcal mol(-1)). These values are in poor agreement with those predicted by DFT calculations reported in the literature (9.5 kcal mol(-1) and 77.6 kcal mol(-1), respectively). Extensive theoretical calculations indicate that the BDE of catechol is reproduced well (81.6 kcal mol(-1)) by use of diffuse functions on oxygen and the CCSD method.     

Mechanism of epoxide hydrolysis in microsolvated nucleotide bases adenine, guanine and cytosine: a DFT study

Six water molecules have been used for microsolvation to outline a hydrogen bonded network around complexes of ethylene epoxide with nucleotide bases adenine (EAw), guanine (EGw) and cytosine (ECw). These models have been developed with the MPWB1K-PCM/6-311++G(3df,2p)//MPWB1K/6-31+G(d,p) level of DFT method and calculated S(N)2 type ring opening of the epoxide due to amino group of the nucleotide bases, viz. the N6 position of adenine, N2 position of guanine and N4 position of cytosine. Activation energy (E(act)) for the ring opening was found to be 28.06, 28.64, and 28.37 kcal mol(-1) respectively for EAw, EGw and ECw. If water molecules were not used, the reactions occurred at considerably high value of E(act), viz. 53.51 kcal mol(-1) for EA, 55.76 kcal mol(-1) for EG and 56.93 kcal mol(-1) for EC. The ring opening led to accumulation of negative charge on the developing alkoxide moiety and the water molecules around the charge localized regions showed strong hydrogen bond interactions to provide stability to the intermediate systems EAw-1, EGw-1 and ECw-1. This led to an easy migration of a proton from an activated water molecule to the alkoxide moiety to generate a hydroxide. Almost simultaneously, a proton transfer chain reaction occurred through the hydrogen bonded network of water molecules and resulted in the rupture of one of the N-H bonds of the quaternized amino group. The highest value of E(act) for the proton transfer step of the reaction was 2.17 kcal mol(-1) for EAw, 2.93 kcal mol(-1) for EGw and 0.02 kcal mol(-1) for ECw. Further, the overall reaction was exothermic by 17.99, 22.49 and 13.18 kcal mol(-1) for EAw, EGw and ECw, respectively, suggesting that the reaction is irreversible. Based on geometric features of the epoxide-nucleotide base complexes and the energetics, the highest reactivity is assigned for adenine followed by cytosine and guanine. Epoxide-mediated damage of DNA is reported in the literature and the present results suggest that hydrated DNA bases become highly S(N)2 active on epoxide systems and the occurrence of such reactions can inflict permanent damage to the DNA.