Modeling single-scattering properties of small cirrus particles by use of a size-shape distribution of ice spheroids and cylinders

In this study, we model single-scattering properties of small cirrus crystals using mixtures of polydisperse, randomly oriented spheroids and cylinders with varying aspect ratios and with a refractive index representative of water ice at a wavelength of 1.88 μm. The Stokes scattering matrix elements averaged over wide shape distributions of spheroids and cylinders are compared with those computed for polydisperse surface-equivalent spheres. The shape-averaged phase function for a mixture of oblate and prolate spheroids is smooth, featureless, and nearly flat at side-scattering angles and closely resembles those typically measured for cirrus. Compared with the ensemble-averaged phase function for spheroids, that for a shape distribution of cylinders shows a relatively deeper minimum at side-scattering angles. This may indicate that light scattering from realistic cirrus crystals can be better represented by a shape mixture of ice spheroids. Interestingly, the single-scattering properties of shape-averaged oblate and prolate cylinders are very similar to those of compact cylinders with a diameter-to-length ratio of unity. The differences in the optical cross sections, single-scattering albedo, and asymmetry parameter between the spherical and the nonspherical particles studied appear to be relatively small. This may suggest that for a given optical thickness, the influence of particle shape on the radiative forcing caused by a cloud composed of small ice crystals can be negligible.     

气体-表面相互作用的分子动力学模拟研究

采用分子动力学模拟方法研究了气体分子Ar在光滑和粗糙Pt表面上的散射规律.提出了一种速度抽样方法,计算了不同温度条件下气体分子对光滑和粗糙表面的切向动量适应系数和吸附概率.结果显示：光滑表面条件下,气体分子的切向动量系数和吸附概率都随着温度的升高而降低;粗糙度对气体分子切向动量与表面的适应具有极大的促进作用,当粗糙度足够大时,切向动量适应系数的大小趋近于1.0,对温度的敏感性也逐渐降低.采用粒子束方法对气体分子在光滑和粗糙表面上的散射规律进行了定量分析.总结了散射过程中气体分子的典型轨迹和动量变化规律,将气体分子在光滑表面的散射分为两种类型：单次碰撞后散射和多次碰撞后散射.单次碰撞后散射的气体分子平均切向动量有所减小,而经过多次碰撞后散射的气体分子则倾向于保持原有的平均切向动量.对于粗糙表面,粗糙度的存在使气体分子与表面间的动量和能量适应更加充分,导致气体分子在较粗糙表面上散射后的平均切向动量大幅减小并接近于0,且气体分子在表面上经历的碰撞次数越多,其散射后的能量损失越严重.     

Photoelectron diffraction at low energies: the applicability of single scattering calculations

The energy dependence of the 4f core level photoemission intensity from Ta(100) has been modeled at low electron kinetic energies using the single scattering cluster (SSC) approximation. The results show a strikingly similar shape to that of a full multiple scattering calculation, particular at electron kinetic energies less than 75 eV. A comparison with the experimentally measured surface/bulk core level intensity oscillations indicates that the first interlayer spacing of the Ta(100) surface is contracted by 11 ± 3%, consistent with previous determinations. These results suggest that SSC calculations can model low energy photoelectron diffraction data from surface shifted core levels with sufficient accuracy to enable a quantitative structural determination of clean, unreconstructed surfaces.     

The impact of ice particle roughness on the scattering phase matrix

The goal of this study is to explore the influence of ice particle habit (or shape) and surface roughness on the scattering phase matrix. As an example, reported here are the results for two wavelengths: 0.67 and 1.61 μm. For this effort, a database of single-scattering properties has been computed for a set of habits including hexagonal plates, hollow and solid columns, hollow and solid 3D bullet rosettes, droxtals, aggregates of solid columns, and aggregates of plates. The database provides properties for each of the habits at 101 wavelengths between 0.45 and 2.24 μm for smooth, moderately roughened, and severely roughened particles. At each wavelength, the scattering properties are provided at 233 discrete particle diameters ranging from 2 to 10,000 μm. A single particle size distribution from a very cold ice cloud sampled during the CRYSTAL-FACE field campaign (T_cld=–76 °C) is used to illustrate the influence of habit and roughness on the phase matrix. In all, four different habit mixtures are evaluated. The nonzero elements of the phase matrix are shown to be quite sensitive to the assumed habit, particularly in the case of ?P₁₂/P₁₁ that is associated with the degree of linear polarization of scattered radiation. Surface roughness is shown to smooth out maxima in the scattering phase function and in the other elements of the phase matrix, consistent with other studies. To compare with the theoretical simulations of the phase matrix for smooth and roughened particles, a full year of cloud-aerosol lidar with orthogonal polarization (CALIOP) data from 2008 is analyzed to provide global statistics on the values of P₁₁ and P₂₂/P₁₁ in the backscattering direction. In a comparison of two of the habit mixtures (one used for MODIS Collection 5 and another that incorporates new habits including hollow bullet rosettes and aggregates of plates) with the CALIOP data, the values for P₁₁ are higher regardless of the degree of particle surface roughness, and the values for P₂₂/P₁₁ are lower than those for CALIOP. Further investigation is warranted to better understand this discrepancy.     

Chemical resistance and cleanability of glazed surfaces

Adhesion of soil on glazed surfaces and their cleanability depends on chemical composition, phase composition, and roughness of the surface. The surface can be glossy consisting mainly of a smooth glassy phase. A matt and rough surface consists of a glassy phase and one or more crystalline phases. The origin and composition of the crystalline phases affect the chemical resistance and the cleanability of the surface. Fifteen experimental glossy and matt glazes were soaked in a slightly alkaline cleaning agent solution. The surfaces were spin-coated with sebum, i.e. a soil component typical for sanitary facilities. After wiping out the soil film in a controlled manner, the surface conditions and the soil left were evaluated with colour measurements, SEM/EDXA and COM. The results show that wollastonite-type crystals in the glaze surfaces were attacked in aqueous solutions containing typical cleaning agents. This corrosion led to significant decrease in the cleanability of the surface. The other crystal types observed, i.e. diopside and quartz crystals were not corroded, and the cleanability of glazes containing only these crystals was not changed in the cleaning agent exposures. Also the glassy phase was found to be attacked in some formulations leading to a somewhat decreased cleanability. The repeated soiling and cleaning procedures indicated that soil is accumulated on rough surfaces and surfaces which were clearly corroded by the cleaning agent.     

Anisotropic surface melting in lyotropic cubic crystals

From experiments with ice or metal crystals, in the vicinity of their crystal/liquid/vapor triple points, it is known that melting of crystals starts on their surfaces and is anisotropic. It is shown here by direct observations under an optical microscope that this anisotropic surface melting phenomenon occurs also in lyotropic systems. In the case of C12EO2/water mixture, it takes place in the vicinity of the peritectic Pn3m/L3/L1 triple point. Above the peritectic triple point, where the Pn3m and L1 phases coexist in the bulk, the surface of a Pn3m-in-L1 crystal is composed of (111)-type facets surrounded by rough surfaces. The angular junction suggests that rough surfaces are wet by a L3-like layer while facets stay “dry”. This is analogous to the pre-melting at rough surfaces in solid crystals. Upon cooling below the peritectic triple point, where L3 and L1 phases coexist in the bulk, a thick layer of the L3 phase grows from the pre-melted, rough Pn3m/L1 interface. Simultaneously, facets stay dry and their radius decreases. In this tri-phasic configuration, stable in a narrow temperature range, the L3/L1 and L3/Pn3m interfaces have shapes of constant mean curvature surfaces having common borders: edges of facets.     

Mechanical properties and photomechanical effect in GaP single crystals

Mechanical properdes of GaP single crystals have been investigated from 100° to 300°C by observing dislocation rosette patterns on indented specimen surfaces. It has been found that GaP has mechanical properties which are common to those of other III–V compounds or elemental semiconductors in several points: the {111} surface polarity dependence of microhardness, the mobility difference between α- and β-dislocations, and the conduction type dependence of dislocation mobility. The growth of dislocation rosettes is suppressed by baking specimens in air. Contrary to the case of II–VI compounds, illumination of visible light during indentation enhances the mobility of dislocations. These experimental results are discussed in terms of an effect of electronic charge of dislocation on its mobility.     

气泡/泡沫覆盖粗糙海面电磁散射的修正双尺度法研究

提出了风驱粗糙海面覆盖水气泡层的‘体-面’复合模型.基于修正的双尺度粗糙面散射理论、MIE理论和矢量辐射传输理论,比较了水气泡与实心水粒子的电磁散射特性的差异,分析了海面泡沫覆盖率与风速、气-海温差的关系.在有、无泡沫层情形下,采用高斯和经验海谱,讨论了单站、双站散射系数与入射角、方位角、风速、风向、极化等参量的关系,并将数值计算的结果与相关文献的测量值进行了比较和分析. 关键词： 电磁散射 海面复合模型 修正双尺度法 MIE     

Light scattering by slightly nonspherical particles on surfaces

We investigate the shape dependence of the scattering by dielectric and metallic particles on surfaces by considering particles whose free-space scattering properties are nearly identical. The scattering by metallic particles is strongly dependent on the shape of the particle in the region near where the particle touches the surface. The scattering by dielectric particles displays a weaker, but nonetheless significant, dependence on particle shape. These results have a significant effect on the use of light scattering to size and identify particles on surfaces.     

Résistance thermique de contact entre isolateurs

The transport of heat between smooth sapphire surfaces has been measured in ultra-high vacuum in the temperature range from 15 to 300°K. The contact consists of a sphere pressed against a plane with a variable load up to 5 kp. In this way the contact shape is well defined and reproducible. The thermal resistance can be separated into two terms: the constriction resistance and the boundary resistance. A model has been developed to describe the last term. Two parameters must be introduced to take into account the phonon scattering at the interface. The experimental results as a function of load and temperature are in very good agreement with such a model. The influence of different surface treatments is also well explained. Additional results for the contact between rough surfaces, which needs a simple extension of the previous theory, are reported.     

Scattering of Radiation of the Sun and the Sky from Two Dimensional Rough Sea Surfaces

The scattering of optical wave from two dimensional rough sea surfaces is studied first with method of facets. The sea surface is divided into many facets, and each facet is treated as a surface with small roughness instead of a smooth plane, therefore more practical and effective. In addition the shadowing function of sea surfaces for arbitrary incident and scattering angles is numerically calculated with the Z-BUFFER method, which applies to any kinks of rough surfaces compared with the methods available. Finally the spectral irradiance of the sun and the spectral radiance of the sky for different time at sea level with fine weather are obtained with the software of Lowtran7, and the scattering of the radiation of the sun and the sky from two dimensional rough sea surfaces for different time, waveband and wind speed is studied, which is of great reference value for reducing the interference to the infrared detector due to the scattering of the radiation of the sun and the sky from sea surfaces.     

随机起伏冰面三维声散射的Kirchhoff近似数值计算模型

针对随机起伏冰面的声散射问题,建立了随机起伏冰面三维声散射的Kirchhoff近似数值计算模型.利用Delaunay三角剖分方法对随机起伏冰面进行三角面元剖分,然后采用Z-buffer算法进行面元的遮挡消隐,得到处于声波照射亮区的面元,最后采用Gordon面元积分的板块元方法计算得到随机起伏冰面的散射强度.数值计算模型...     

Bistatic scattering and depolarization by randomly rough surfaces: application to the natural rough surfaces in X-band

Abstract

The scattering of waves by random rough surfaces has important applications in the remote sensing of oceans and land. The problem of developing a model for rough surfaces is very difficult since, at best, the scattering coefficient σ⁰ is dependent upon (at least) the radar frequency, geometrical and physical parameters, incident and observation angles, and polarization. The problem of electromagnetic scattering from a randomly rough surface is analysed using the Kirchhoff approximation (stationary phase, scalar approximation), the small-perturbation model and the two-scale models. A first major new consideration in this paper is the polarimetric signature calculations as a function of the transmitter location and receiver location for a bistatic radio-link. We calculate the like- and cross-polarized received power directly using the scattering coefficients, without calculating the Mueller matrix. Next, a study of the regions of validity of the Kirchhoff and small-perturbation rough surface scattering models (in the bistatic case) is presented. Comparisons between the numerical calculations and the models are made for various surface rms heights and correlation lengths both normalized to the incident wavenumber (denoted by σ and L, respectively). By using these two parameters to form a two-dimensional space, the approximate regions of validity are then established. The second major new consideration is the development of a theoretical two-scale model describing bistatic reflectivity as well as the numerical results computed for the bistatic radar cross section from rough surfaces especially from the sea and snow-covered surfaces. The results are used to show the Brewster angle effect on near-grazing angle scattering.     

Scattering phase functions of horizontally oriented hexagonal ice crystals

Finite-difference time domain (FDTD) solutions are first compared with the corresponding T-matrix results for light scattering by circular cylinders with specific orientations. The FDTD method is then utilized to study the scattering properties of horizontally oriented hexagonal ice plates at two wavelengths, 0.55 and 12 μm. The phase functions of horizontally oriented ice plates deviate substantially from their counterparts obtained for randomly oriented particles. Furthermore, we compute the phase functions of horizontally oriented ice crystal columns by using the FDTD method along with two schemes for averaging over the particle orientations. It is shown that the phase functions of hexagonal ice columns with horizontal orientations are not sensitive to the rotation about the principal axes of the particles. Moreover, hexagonal ice crystals and circular cylindrical ice particles have similar optical properties, particularly, at a strongly absorbing wavelength, if the two particle geometries have the same length and aspect ratio defined as the ratio of the radius or semi-width of the cross section of a particle to its length. The phase functions for the two particle geometries are slightly different in the case of weakly absorbing plates with large aspect ratios. However, the solutions for circular cylinders agree well with their counterparts for hexagonal columns.     

Multiple scattering of plasmons at rough surfaces

We investigated the polarization and angle dependence of the scattered light intensity of surface plasma oscillations (SPO) propagating along rough silver surfaces. The rough silver films were prepared using the methods of pre-evaporating CaF₂ and silver on heated substrates. The scattered light intensity of both systems is explained by surface scattering effects. Differences of the light intensities between the rough silver films prepared by the two methods mainly were observed in “restlight intensities”, which cannot be described by first-order scattering theories. We explain these differences by higher order scattering effects.     

表面分形球、柱的光散射

分形和分维是近些年才兴起的一门处理复杂事物的新方法￣［１］。本文主要研究具有表面分形的球、柱的光散射特征。我们首先利用几何光学近似研究了一种表面满足自仿射原理的分形均匀球的散射，其散射特性与分维存在一定的关系。我们还利用微扰法讨论了表面具有沟槽的分形柱的光散射的分形特征。     

Bistatic scattering and depolarization by randomly rough surfaces: application to the natural rough surfaces in X-band

The scattering of waves by random rough surfaces has important applications in the remote sensing of oceans and land. The problem of developing a model for rough surfaces is very difficult since, at best, the scattering coefficient σ⁰ is dependent upon (at least) the radar frequency, geometrical and physical parameters, incident and observation angles, and polarization. The problem of electromagnetic scattering from a randomly rough surface is analysed using the Kirchhoff approximation (stationary phase, scalar approximation), the small-perturbation model and the two-scale models. A first major new consideration in this paper is the polarimetric signature calculations as a function of the transmitter location and receiver location for a bistatic radio-link. We calculate the like- and cross-polarized received power directly using the scattering coefficients, without calculating the Mueller matrix. Next, a study of the regions of validity of the Kirchhoff and small-perturbation rough surface scattering models (in the bistatic case) is presented. Comparisons between the numerical calculations and the models are made for various surface rms heights and correlation lengths both normalized to the incident wavenumber (denoted by σ and L, respectively). By using these two parameters to form a two-dimensional space, the approximate regions of validity are then established. The second major new consideration is the development of a theoretical two-scale model describing bistatic reflectivity as well as the numerical results computed for the bistatic radar cross section from rough surfaces especially from the sea and snow-covered surfaces. The results are used to show the Brewster angle effect on near-grazing angle scattering.     

Temperature dependence of the effective anisotropy in Ni nanowire arrays

Magnetic hysteresis in Ni nanowire arrays grown by electrodeposition inside the pores of anodic alumina templates is studied as a function of temperature in the range between 5 K and 300 K. Nanowires with different diameters, aspect ratios, inter-wire distance in the array and surface condition (smooth and rough) are synthesized. These microstructure parameters are linked to the different free magnetic energy contributions determining coercivity and the controlling magnetization reversal mechanisms. Coercivity increases with temperature in arrays of nanowires with rough surfaces and small diameters ─33 nm and 65 nm─ when measured without removing the alumina template and/or the Al substrate. For thicker wires ─200 nm in diameter and relatively smooth surfaces─ measured without the Al substrate, coercivity decreases as temperature rises. These temperature dependences of magnetic hysteresis are described in terms of an effective magnetic anisotropy K_a, resulting from the interplay of magnetocrystalline, magnetoelastic and shape anisotropies, together with the magnetostatic interaction energy density between nanowires in the array. The experimentally determined coercive fields are compared with results of micromagnetic calculations, performed considering the magnetization reversal mode acting in each studied array and microstructure parameters. A method is proposed to roughly estimate the value of K_a experimentally, from the hysteresis loops measured at different temperatures. These measured values are in agreement with theoretical calculations. The observed temperature dependence of coercivity does not arise from an intrinsic property of pure Ni but from the nanowires surface roughness and the way the array is measured, with or without the alumina template and/or the aluminum support.     

Structure and fluctuations of the premelted liquid film of ice at the triple point

ABSTRACT

In this paper, we study the structure of the ice/vapour interface in the neighbourhood of the triple point for the TIP4P/2005 model. We probe the fluctuations of the ice/film and film/vapour surfaces that separate the liquid film from the coexisting bulk phases at basal, primary prismatic and secondary prismatic planes. The results are interpreted using a coupled sine Gordon plus Interface Hamiltonian model. At large length scales, the two bounding surfaces are correlated and behave as a single complex ice/vapour interface. For small length, on the contrary, the ice/film and film/vapour surfaces behave very much like independent ice/water and water/vapour interfaces. The study suggests that the basal facet of the TIP4P/2005 model is smooth, the prismatic facet is close to a roughening transition, and the secondary prismatic facet is rough. For the faceted basal face, our fluctuation analysis allows us to estimate the step free energy in good agreement with experiment. Our results allow for a quantitative characterisation of the extent to which the adsorbed quasi-liquid layer behaves as water and explains experimental observations which reveal similar activation energies for crystals grown in bulk vapour or bulk water.