Phosphorus-containing block copolymer templates can control the size and shape of gold nanostructures

Amphiphilic block copolymers containing phosphine moieties in the main chain are employed as macromolecular ligands for gold(I). The sequential living anionic copolymerization of isoprene (I) and the phosphaalkene, MesP CPh2 (Mes = 2,4,6-trimethylphenyl) affords the block copolymer [PI]404-b-[MesP-CPh2]32 (1a). The incorporation of gold(I) moieties into this functional copolymer is accomplished by treating 1 with THT.AuCl (THT = tetrahydrothiophene) which affords [PI]404-b-[MesP(AuCl)-CPh2]32 (2a). Remarkably, dissolution of gold-functionalized 2 in n-heptane, a block-selective solvent for isoprene, affords spherical micelles with gold(I)-rich cores. Micelles were examined by transmission electron microscopy (TEM) and dynamic light scattering (DLS). We also prepared two additional copolymers with longer phosphine blocks and shorter PI segments: [PI]222-b-[MesP(AuCl)-CPh2]77 (2b) and [PI]164-b-[MesP(AuCl)-CPh2]85 (2c). When assembled in isoprene-selective solvents, 2b forms wormlike structures and 2c, with the longest phosphine block, forms fascinating micron sized intertwined wormlike structures. This represents a new method to control the shape and size of gold(I) nanostructures.     

Heterogeneous or homogeneous catalysis? Mechanistic studies of the rhodium-catalyzed dehydrocoupling of amine-borane and phosphine-borane adducts

In depth, comparative studies on the catalytic dehydrocoupling of the amine-borane adduct Me(2)NH.BH(3) (to form [Me(2)N-BH(2)](2)) and the phosphine-borane adduct Ph(2)PH.BH(3) (to form Ph(2)PH-BH(2)-PPh(2)-BH(3)) with a variety of Rh (pre)catalysts such as [[Rh(1,5-cod)(micro-Cl)](2)], Rh/Al(2)O(3), Rh(colloid)/[Oct(4)N]Cl, and [Rh(1,5-cod)(2)]OTf have been performed in order to determine whether the dehydrocoupling proceeds by a homogeneous or heterogeneous mechanism. The results obtained suggest that the catalytic dehydrocoupling of Me(2)NH.BH(3) is heterogeneous in nature involving Rh(0) colloids, while that of Ph(2)PH.BH(3) proceeds by a homogeneous mechanism even when starting with Rh(0) precursors such as Rh/Al(2)O(3). The catalytic dehydrocoupling reactions are thought to proceed by different mechanisms due to a combination of factors such as (i) the greater reducing strength of amine-borane adducts, (ii) the increased ease of dissociation of phosphine-borane adducts, and (iii) phosphine ligation and/or poisoning of active catalytic sites on metal colloids.     

Osmabenzenes from the reactions of a dicationic osmabenzyne complex

Treatment of the osmabenzyne Os([triple bond]CC(SiMe(3))=C(Me)C(SiMe(3))=CH)Cl(2)(PPh(3))(2) (1) with 2,2'-bipyridine (bipy) and thallium triflate (TlOTf) produces the thermally stable dicationic osmabenzyne [Os([triple bond]CC(SiMe(3))=C(Me)C(SiMe(3))=CH)(bipy)(PPh(3))(2)](OTf)(2) (2). The dicationic osmabenzyne 2 reacts with ROH (R = H, Me) to give osmabenzene complexes [Os(=C(OR)CH=C(Me)C(SiMe(3))=CH)(bipy)(PPh(3))(2)]OTf, in which the metallabenzene ring deviates significantly from planarity. In contrast, reaction of the dicationic complex 2 with NaBH(4) produces a cyclopentadienyl complex, presumably through the osmabenzene intermediate [Os(=CHC(SiMe(3))=C(Me)C(SiMe(3))=CH)(bipy)(PPh(3))(2)]OTf. The higher thermal stability of [Os(=C(OR)CH=C(Me)C(SiMe(3))=CH)(bipy)(PPh(3))(2)]OTf relative to [Os(=CHC(SiMe(3))=C(Me)C(SiMe(3))=CH)(bipy)(PPh(3))(2)]OTf can be related to the stabilization effect of the OR groups on the metallacycle. A theoretical study shows that conversion of the dicationic osmabenzyne complex [Os([triple bond]CC(SiMe(3))=C(Me)C(SiMe(3))=CH)(bipy)(PPh(3))(2)](OTf)(2) to a carbene complex by reductive elimination is thermodynamically unfavorable. The theoretical study also suggests that the nonplanarity of the osmabenzenes [Os(=C(OR)CH=C(Me)C(SiMe(3))=CH)(bipy)(PPh(3))(2)]OTf is mainly due to electronic reasons.     

Enantiomerically pure phosphaalkene-oxazolines (PhAk-Ox): synthesis, scope and copolymerization with styrene

The design of a synthetic route to a class of enantiomerically pure phosphaalkene-oxazolines (PhAk-Ox) is presented. The condensation of a lithium silylphosphide and a ketone (the phospha-Peterson reaction) was used as the P=C bond-forming step. Attempted condensation of PhC(=O)Ox (Ox = CNOCH(iPr)CH(2)) and MesP(SiMe(3))Li gave the unusual heterocycle (MesP)(2)C(Ph)=CN-(S)-CH(iPr)CH(2)O (3). However, PhAk-Ox (S,E)-MesP=C(Ph)CMe(2)Ox (1?a) was successfully prepared by treating MesP(SiMe(3))Li with PhC(=O)CMe(2)Ox (52?%). To demonstrate the modularity and tunability of the phospha-Peterson synthesis several other phosphaalkene-oxazolines were prepared in an analogous manner to 1?a: TripP=C(Ph)CMe(2)Ox (1?b; Trip = 2,4,6-triisopropylphenyl), 2-iPrC(6)H(4)P=C(Ph)CMe(2)Ox (1?c), 2-tBuC(6)H(4)P=C(Ph)CMe(2)Ox (1?d), MesP=C(4-MeOC(6)H(4))CMe(2)Ox (1?e), MesP=C(Ph)C(CH(2))(4)Ox (1?f), and MesP=C(3,5-(CF(3))(2)C(6)H(3))C(CH(2))(4)Ox (1?g). To evaluate the PhAk-Ox compounds as prospective precursors to chiral phosphine polymers, monomer 1?a and styrene were subjected to radical-initiated copolymerization conditions to afford [{MesPC(Ph)(CMe(2)Ox)}(x){CH(2)CHPh}(y)](n) (9?a: x = 0.13n, y = 0.87n; GPC: M(w) = 7400?g mol(-1) , PDI = 1.15).     

Flexible coordination of the carboxylate ligand in tin(II) amides and a 1,3-diaza-2,4-distannacyclobutanediyl

A series of tin(II) amido complexes possessing m-terphenyl carboxylate ligands have been prepared. These complexes, namely [(Me(3)Si)(2)NSn(mu-O(2)CC(6)H(2)Ph(3))](2), [(Me(3)Si)(2)NSn(mu-O(2)CC(6)H(3)Mes(2))](2), and [(Me(3)Si)(2)NSn(mu-O(2)CC(6)H(2)Mes(2)Me)](2) [Mes = 2,4,6-trimethylphenyl], are the first structurally characterized examples of tin(II) carboxylate complexes exhibiting discrete Sn(2)O(4)C(2) heterocyclic cores. Initial reactivity studies led to the isolation of a 1,3-diaza-2,4-distannacyclobutanediyl, [(Mes(2)C(6)H(3)CO(2))Sn(mu-NSiMe(3))](2). This molecule possesses a Sn(2)N(2) heterocyclic core and it was crystallised as both the CH(2)Cl(2) and Et(2)O solvates. Although the tin atoms in this molecule have a formal oxidation state of 3+, preliminary computational studies on this molecule suggest that it is best described as a ground state singlet. Finally, the X-ray crystal structure of (CH(2)Cl)(Cl)Sn[N(SiMe(3))(2)](2), the product of oxidative addition of CH(2)Cl(2) to Sn[N(SiMe(3))(2)](2), is also presented herein.     

Synthesis, structures and stabilities of thioanisole-functionalised phosphido-borane complexes of the alkali metals

Treatment of the secondary phosphine {(Me(3)Si)(2)CH}PH(C(6)H(4)-2-SMe) with BH(3)·SMe(2) gives the corresponding phosphine-borane {(Me(3)Si)(2)CH}PH(BH(3))(C(6)H(4)-2-SMe) (9) as a colourless solid. Deprotonation of 9 with n-BuLi, PhCH(2)Na or PhCH(2)K proceeds cleanly to give the corresponding alkali metal complexes [[{(Me(3)Si)(2)CH}P(BH(3))(C(6)H(4)-2-SMe)]ML](n) [ML = Li(THF), n = 2 (10); ML = Na(tmeda), n = ∞ (11); ML = K(pmdeta), n = 2 (12)] as yellow/orange crystalline solids. X-ray crystallography reveals that the phosphido-borane ligands bind the metal centres through their sulfur and phosphorus atoms and through the hydrogen atoms of the BH(3) group in each case, leading to dimeric or polymeric structures. Compounds 10-12 are stable towards both heat and ambient light; however, on heating in toluene solution in the presence of 10, traces of free phosphine-borane 9 are slowly converted to the free phosphine {(Me(3)Si)(2)CH}PH(C(6)H(4)-2-SMe) (5) with concomitant formation of the corresponding phosphido-bis(borane) complex [{(Me(3)Si)(2)CH}P(BH(3))(2)(C(6)H(4)-2-SMe)]Li (14).     

Fluoride ion complexation by a B(2)/Hg heteronuclear tridentate Lewis acid

The reaction of [Li(THF)(4)][1,8-mu-(Mes(2)B)C(10)H(6)] with HgCl(2) affords [1,1'-(Hg)-[8-(Mes(2)B)C(10)H(6)](2)] () or [1-(ClHg)-8-(Mes(2)B)C(10)H(6)] (), depending on the stoichiometry of the reagents. These two new compounds have been characterized by (1)H, (13)C, (11)B and (199)Hg NMR, elemental analysis and X-ray crystallography. The cyclic voltammogram of in THF shows two distinct waves observed at E(1/2) -2.31 V and -2.61 V, corresponding to the sequential reductions of the two boron centers. Fluoride titration experiments monitored by electrochemistry suggest that binds tightly to one fluoride anion and more loosely to a second one. Theses conclusions have been confirmed by a UV-vis titration experiment which indicates that the first fluoride binding constant (K(1)) is greater than 10(8) M(-1) while the second (K(2)) equals 5.2 (+/- 0.4) x 10(3) M(-1). The fluoride binding properties of have been compared to those of [1-(Me(2)B)-8-(Mes(2)B)C(10)H(6)] () and [1-((2,6-Me(2)-4-Me(2)NC(6)H(2))Hg)-8-(Mes(2)B)C(10)H(6)] (). Both experimental and computational results indicate that its affinity for fluoride anions is comparable to that of but significantly lower than that of the diborane . In particular, the fluoride binding constants of , and in chloroform are respectively equal to 5.0 (+/- 0.2) x 10(5) M(-1), 1.0 (+/- 0.2) x 10(3) M(-1) and 1.7 (+/- 0.1) x 10(3) M(-1). Determination of the crystal structures of the fluoride adducts [S(NMe(2))(3)][-mu(2)-F] and [S(NMe(2))(3)][-mu(2)-F] along with computational results indicate that the higher fluoride binding constant of arises from a strong chelate effect involving two fluorophilic boron centers.     

Copper-catalyzed oxidation of azolines to azoles

We report herein convenient, aerobic conditions for the oxidation of thiazolines to thiazoles and data regarding the oxidation mechanism. These reactions feature operationally simple and environmentally benign conditions and proceed in good yield to afford the corresponding azoles, thus enabling the inexpensive preparation of valuable molecular building blocks. Incorporation of a novel diimine-ligated copper catalyst, [((Mes)DAB(Me))Cu(II)(OH(2))(3)](2+) [(-)OTf](2), provides increased reaction efficiency in many cases. In other cases copper-free conditions involving a stoichiometric quantity of base affords superior results.     

Linear hybrid aminoborane/phosphinoborane chains: synthesis, proton-hydride interactions, and thermolysis behavior

The reaction of the lithiated phosphine-borane adducts Li[PPhR.BH(3)] or Li[CH(2)-PR(2).BH(3)] with Me(2)NH.BH(2)Cl afforded the hybrid linear species Me(2)NH-BH(2)-PPhR-BH(3) (1, R = Ph; 2, R = H) or Me(2)NH-BH(2)-CH(2)-PR(2)-BH(3) (3, R = Ph; 4, R = Me). Single-crystal X-ray diffraction studies on 1 and 3, the first for linear hybrid aminoborane/phosphinoborane adducts, confirmed the expected four-coordinate N-B-P-B and N-B-C-P-B frameworks. In addition, interactions between the protic N-H and hydridic B-H hydrogen atoms resulted in short intermolecular H...H contacts for 1, whereas 3 was found to possess an exceptionally short intramolecular H...H distance of 1.95 A. Solution and solid state infrared studies on 3 and 4 also suggest that these dihydrogen interactions were maintained even in dilute solution. Hydrogen bond strengths in the range of 7.9 to 10.9 kJ mol(-1) indicate the presence of a relatively weak interaction. The thermal and catalytic dehydrocoupling reactivities of 1-4 were also investigated. Chain cleavage reactions were observed for 1 and 2 upon thermolysis at 130 degrees C to afford species such as Me(2)NH.BH(3), [Me(2)N-BH(2)](2), PhPRH.BH(3) (R = Ph, H), PhPRH (R = Ph, H), Ph(2)PH-BH(2)-PPh(2)-BH(3), and also the low molecular weight polyphosphinoborane [PhPH-BH(2)](n) (M(w) approximately 5000). Similar products were observed for the attempted catalytic dehydrocoupling reactions but under milder reaction conditions (50 degrees C). Thermolysis of 3 at 130 degrees C yielded the six-membered ring [BH(2)-CH(2)-PPh(2)](2) (5), which presumably results from the dissociation of Me(2)NH.BH(3) from 3. Thermolysis of 4 at 90 degrees C afforded Me(2)NH.BH(3) and Me(3)P.BH(3), in addition to a product tentatively assigned as [BH(2)-CH(2)-PMe(2)](2) (6).     

Zirconium, hafnium, and tantalum amide silyl complexes: their preparation and conversion to metallaheterocyclic complexes via gamma-hydrogen abstraction by silyl ligands

New transition metal silyl amide complexes (Me(2)N)(3)Ta[N(SiMe(3))(2)](SiPh(2)Bu(t)) (1) and (Me(2)N)M[N(SiMe(3))(2)](2)(SiPh(2)Bu(t)) (M = Zr, 2a, and Hf, 2b) were found to undergo gamma-H abstraction by the silyl ligands to give metallaheterocyclic complexes (3) and (M = Zr, 4a, and Hf, 4b), respectively. The conversion of 1 to 3 follows first-order kinetics with DeltaH() = 23.6(1.6) kcal/mol and DeltaS() = 3(5) eu between 288 and 313 K. The formation of 4a from (Me(2)N)Zr[N(SiMe(3))(2)](2)Cl (5a) and Li(THF)(2)SiPh(2)Bu(t) (6) involves the formation of the intermediate 2a, followed by gamma-H abstraction. Kinetic studies of these consecutive reactions, a second-order reaction to give 2a and then a first-order gamma-H abstraction to give 4a, were conducted by an analytical method and a numerical method. At 278 K, the rate constants k(1) and k(2) for the two consecutive reactions are 2.17(0.03) x 10(-)(3) M(-)(1) s(-)(1) and 5.80(0.15) x 10(-)(5) s(-)(1) by the analytical method. The current work is a rare kinetic study of the A + B --> C --> D (+ E) consecutive reactions. Kinetic studies of the formation of a metallaheterocyclic moiety have, to our knowledge, not been reported. In addition, gamma-H abstraction by a silyl ligand to give such a metallaheterocyclic moiety is new. Theoretical investigations of the gamma-H abstraction by silyl ligands have been conducted by density functional theory calculations at the Becke3LYP (B3LYP) level, and they revealed that the formation of the metallacyclic complexes through gamma-H abstraction is entropically driven. X-ray crystal structures of (Me(2)N)(3)Ta[N(SiMe(3))(2)](SiPh(2)Bu(t)) (1), (Me(2)N)Zr[N(SiMe(3))(2)](2)Cl (5a), and (M = Zr, 4a, and Hf, 4b) are also reported.     

Syntheses, structures and reactions of a series of beta-diketiminatoyttrium compounds

This paper describes the synthesis and selected reactions of a series of crystalline mono(beta-diiminato)yttrium chlorides , , , , , , and . The X-ray structure of each has been determined, as well as of [YCl()(2)] (), [Y()(2)OBu(t)] () and [Y{CH(SiMe(3))(2)}(thf)(mu-Cl)(2)Li(OEt(2))(2)(mu-Cl)](2) (). The N,N'-kappa(2)-beta-diiminato ligands were [{N(R)C(Me)}(2)CH](-) [R = C(6)H(4)Pr(i)-2 (); R = C(6)H(4)Bu(t)-2 (); R = C(6)H(3)Pr(i)(2)-2,6 ()], [{N(SiMe(3))C(Ph)}(2)CH)](-) () and [{N(C(6)H(3)Pr(i)(2)-2,6)C(H)}(2)CPh](-) (). Equivalent portions of Li[L(x)] and YCl(3) in Et(2)O under mild conditions yielded [Y(mu-Cl)(L(x))(mu-Cl)(2)Li(OEt(2))(2)](2) [L(x) = () or ()] and [Y(mu-Cl)()(mu-Cl)Li(OEt(2))(2)(mu-Cl)](2) () or its thf (instead of Et(2)O) equivalent . Each of the Li(OEt(2))(2)Cl(2) moieties is bonded in a terminal () or bridging () mode with respect to the two Y atoms; the difference is attributed to the greater steric demand of than or . Under slightly more forcing conditions, YCl(3) and Li() (via) gave the lithium-free complex [YCl(2)()(thf)(2)] (). Two isoleptic compounds and (having in place of in , and , respectively) were obtained from YCl(3) and an equivalent portion of K[] and Na[], respectively; under the same conditions using Na[], the unexpected product was [YCl()(2)] () (i.e. incorporating only one half of the YCl(3)). A further unusual outcome was in the formation of from and 2 Li[CH(SiMe(3))(2)]. Compound [Y(){N(H)C(6)H(3)Pr(i)(2)-2,6}(thf)(mu(3)-Cl)(2)K](2).4Et(2)O (), obtained from and K[N(H)C(6)H(3)Pr(i)(2)-2,6], is noteworthy among group 3 or lanthanide metal (M) compounds for containing MClKCl (M = Y) moieties.     

Boron and aluminum complexes of sterically demanding phosphinimines and phosphinimides

Reactions of sterically demanding phosphinimines R3PNH [R=i-Pr (1), t-Bu (2)] were examined. Reactions with B(C6F5)3 formed the adducts (R3PNH)B(C6F5)3 [R=i-Pr (3), t-Bu (4)] in high yield. On the other hand, 2 reacts with HB(OBu)2, evolving H2 to give t-Bu3PNB(OBu)2 (5). The reaction of 2 equiv of 2 with BH3.SMe2 affords the species (t-Bu3PN)2BH (6). In contrast, the reaction of n-Bu(t-Bu)2PNH with BH3.SMe2 results in the formation of the robust adduct n-Bu(t-Bu)2PNH.BH3 (8). An alternative route to borane-phosphinimide complexes involves Me3SiCl elimination, as exemplified by the reaction of BCl2Ph with n-Bu3PNSiMe3, which gives the product n-Bu3PNBCl(Ph) (9). The corresponding reactions of the parent phosphinimines 1 and 2 with AlH3.NMe2Et give the dimers [(mu-i-Pr3PN)AlH2]2 (10) and [(mu-t-Bu3PN)AlH2]2 (11). Species 11 reacts further with Me3SiO3SCF3 to provide [(mu-t-Bu3PN)AlH(OSO2CF3)]2 (12). The reaction of the lithium salt [t-Bu3PNLi]4 (13) with BCl3 proceeds smoothly to give t-Bu3PNBCl2 (14), which is readily alkylated to give t-Bu3PNBMe2 (15). Subsequent reaction of 15 with B(C6F5)3 results in methyl abstraction and the formation of [(mu-t-Bu3PN)BMe]2[MeB(C6F5)3]2 (16). The reaction of 13 in a 2:1 ratio with BCl3 gives the salt [(t-Bu3PN)2B]Cl (17). This species can be methylated to give (t-Bu3PN)2BMe (18), which undergoes subsequent reaction with [Ph3C][X] (X=[B(C6F5)4], [PF6]) to form the related salts [(t-Bu3PN)2B][B(C6F5)4] (19) and [(t-Bu3PN)2B][PF6] (20), respectively. Analogous reactions with [Ph3C][BF4] afforded [t-Bu3PNBF2]2 (21). Compounds 3, 4, 6, 8, 11, 12, 17, 19, and 21 were characterized by X-ray crystallography.     

Reactivity at the beta-diketiminate ligand Nacnac- on titanium(IV) (Nacnac- = [Ar]NC(CH3)CHC(CH3)N[Ar], Ar = 2,6-[CH(CH3)2]2C6H3). Diimine-alkoxo and bis-anilido ligands stemming from the Nacnac- skeleton

The reaction of ketene OCCPh(2) with the four-coordinate titanium(IV) imide (L(1))Ti[double bond]NAr(OTf) (L(1)(-) = [Ar]NC(CH(3))CHC(CH(3))N[Ar], Ar = 2,6-[CH(CH(3))(2)](2)C(6)H(3)) affords the tripodal dimine-alkoxo complex (L(2))Ti[double bond]NAr(OTf) (L(2)(-) = [Ar]NC(CH(3))CHC(O)[double bond]CPh(2)C(CH(3))N[Ar]). Complex (L(2))Ti[double bond]NAr(OTf) forms from electrophilic attack of the beta-carbon of the ketene on the gamma-carbon of the Nacnac(-) NCC(gamma)CN ring. On the contrary, nucleophiles such as LiR (R(-) = Me, CH(2)(t)Bu, and CH(2)SiMe(3)) deprotonate cleanly in OEt(2) the methyl group of the beta-carbon on the former Nacnac(-) backbone to yield the etherate complex (L(3))Ti[double bond]NAr(OEt(2)), a complex that is now supported by a chelate bis-anilido ligand (L(3)(2)(-) = [Ar]NC(CH(3))CHC(CH(2))N[Ar]). In the absence of electrophiles or nucleophiles, the robust (L(1))Ti[double bond]NAr(OTf) template was found to form simple adducts with Lewis bases such as CN(t)Bu or NCCH(2)(2,4,6-Me(3)C(6)H(2)). Complexes (L(2))Ti[double bond]NAr(OTf), (L(3))Ti[double bond]NAr(OEt(2)), and the adducts (L(1))Ti[double bond]NAr(OTf)(XY) [XY = CN(t)Bu and NCCH(2)(2,4,6-Me(3)C(6)H(2))] were structurally characterized by single-crystal X-ray diffraction studies.     

Alkali metal complexes of a phosphine-borane-stabilised carbanion: influence of co-ligands on structure

The adducts [[(Me(3)Si)(2){Me(2)P(BH(3))}C]K(L)(n)](m) [L = THF, n = 0.5, m = infinity (2a); L = tmeda (2b), pmdeta (2c), n = 1, m = 2] may be synthesised by treatment of solvent-free [[(Me(3)Si)(2){Me(2)P(BH(3))}C]K](infinity) (2) with the corresponding Lewis base (tmeda = N,N,N',N'-tetramethylethylenediamine; pmdeta = N,N,N',N',N'-pentamethyldiethylenetriamine). X-Ray crystallography reveals that, whereas 2 crystallises with a complex 2-dimensional sheet structure, 2a crystallises as a ribbon-type one-dimensional polymer and both 2b and 2c crystallise as dimers. The corresponding complex with 12-crown-4, [K(12-crown-4)(2)][(Me(3)Si)(2){Me(2)P(BH(3))}C] (2d) crystallises as a separated ion pair. The complexes [[(Me(3)Si)(2){Me(2)P(BH(3))}C]M(pmdeta)](n) [M = Na, n = 1 (6); M = Rb, n = 2 (7)] may be synthesised by treatment of [(Me(3)Si)(2){Me(2)P(BH(3))}C]M with pmdeta. Whereas crystallises as a discrete monomer, compound 7 crystallises as a dimer. Compounds 2, 2a-2d, 6, 7 and the corresponding caesium derivative [[(Me(3)Si)(2){Me(2)P(BH(3))}C]Cs(pmdeta)](2) () provide an opportunity to consider the influence of the ionic radius of the metal and the nature of the co-ligands on the structures of alkali metal complexes of a phosphine-borane-stabilised carbanion.     

The structural characteristics of organozinc complexes incorporating N,N'-bidentate ligands

Dimethylzinc reacts with an excess of N-2-pyridylaniline 6 to give the homoleptic species, Zn[PhN(2-C(5)H(4)N)](2) 8. Single crystal X-ray diffraction reveals a solid-state dimer based on an 8-membered (NCNZn)(2) core motif. Zn[CyN(2-C(5)H(4)N)]Me (Cy =c-C(6)H(11)) 10, prepared by the combination of ZnMe(2) with the corresponding cyclohexyl-substituted pyridylamine, is also dimeric in the solid state but reveals a central (ZnN)(2) metallacycle. Employment of (p-Tol)NH(2-C(5)H(4)N)(p-Tol = 4-MeC(6)H(4)) 11 yielded the tris(zinc) adduct Zn(3)[(p-Tol)N(2-C(5)H(4)N)](4)Me(2) 12, which incorporates a central chiral molecule of 'Zn[(p-Tol)N(2-C(5)H(4)N)](2)' 12a, that bridges two 'Zn[(p-Tol)N(2-C(5)H(4)N)]Me' 12b units. A similar trimetallic structure is noted when the pyridylaniline substrate 11 is replaced with the bicyclic guanidine 1,3,4,6,7,8-hexahydro-2H-pyrimido[1,2-a]pyrimidine (hppH), affording Zn(3)(hpp)(4)Me(2) 13. Spectroscopic studies point to retention of the solid-state structure of in hydrocarbon solution. Reaction of 13 with dimesityl borinic acid, Mes(2)BOH (Mes = mesityl), affords Zn(3)(hpp)(4)(OBMes(2))(2) 14 in which the trimetallic core is retained. This reactivity is in contrast to the closely related reaction of dimeric Zn[Me(2)NC[N(i)Pr](2)]Me 15 with Mes(2)BOH, which yielded Zn[Me(2)NC[N(i)Pr](2)][OBMes(2)].Me(2)NC[N(i)Pr][NH(i)Pr] 16 as a result of protonation at the guanidine ligand in addition to the Zn-Me bond.     

Chemistry of phosphine-borane adducts at platinum centers: dehydrocoupling reactivity of Pt(II) dihydrides with P-H bonds

The reaction of the Pt(II) dihydride complex cis-[PtH2(dcype)](dcype = 1,2-bis(dicyclohexylphosphino)ethane) with the primary or secondary phosphine-borane adducts PhRPH x BH3(R = H, Ph) was found to exclusively afford the mono-substituted complexes cis-[PtH(PPhR x BH3)(dcype)](1: R = H; 2: R = Ph)via a dehydrocoupling reaction between Pt-H and P-H bonds. Similar reactivity was observed between the uncoordinated phosphines PhRPH (R = H, Ph) and cis-[PtH2(dcype)], which gave cis-[PtH(PPhR)(dcype)](4: R = H; 5: R = Ph). The complexes were characterized by 1H, 11B, 13C and 31P NMR spectroscopy, IR, MS and, in the case of 2, X-ray crystallography that confirmed the cis geometries. The di-substituted complex cis-[Pt(PhPH x BH3)2(dcype)](3) was prepared from the reaction of cis-[PtCl2(dcype)] with two equivalents of Li[PPhH x BH3]. This suggested that steric reasons alone cannot be used to explain the lack of reactivity with respect to a second dehydrocoupling reaction involving the remaining Pt-H bond in complexes 1, 2, 4 and 5.     

Solution behavior and structural properties of Cu(I) complexes featuring m-terphenyl isocyanides

The synthesis of the m-terphenyl isocyanide ligand CNAr (Mes2) (Mes = 2,4,6-Me 3C 6H 2) is described. Isocyanide CNAr (Mes2) readily functions as a sterically encumbering supporting unit for several Cu(I) halide and pseudo halide fragments, fostering in some cases rare structural motifs. Combination of equimolar quantities of CNAr (Mes2) and CuX (X = Cl, Br and I) in tetrahydrofuran (THF) solution results in the formation of the bridging halide complexes (mu-X) 2[Cu(THF)(CNAr (Mes2))] 2. Addition of CNAr (Mes2) to cuprous chloride in a 2:1 molar ratio generates the complex ClCu(CNAr (Mes2)) 2 in a straightforward manner. Single-crystal X-ray diffraction has revealed ClCu(CNAr (Mes2)) 2 to exist as a three-coordinate monomer in the solid state. As determined by solution (1)H NMR and FTIR spectroscopic studies, monomer ClCu(CNAr (Mes2)) 2 resists tight binding of a third CNAr (Mes2) unit, resulting in rapid isocyanide exchange. Contrastingly, addition of 3 equiv of CNAr (Mes2) to cuprous iodide readily affords the tris-isocyanide species, ICu(CNAr (Mes2)) 3, as determined by X-ray diffraction. Similar coordination behavior is observed in the tris-isocyanide salt [(THF)Cu(CNAr (Mes2)) 3]OTf (OTf = O 3SCF 3), which is generated upon treatment of (C 6H 6)[Cu(OTf)] 2 with 6 equiv of CNAr (Mes2) in THF. The disparate coordination behavior of the [CuCl] fragment relative to both [CuI] and [CuOTf] is rationalized in terms of structure and Lewis acidity of the Cu-containing fragments. The putative triflate species [Cu(CNAr (Mes2)) 3]OTf itself serves as a good Lewis acid and is found to weakly bind C 6H 6 in an eta (1)- C manner in the solid-state. Density Functional Theory is used to describe the bonding and energetics of the eta (1)- C Cu-C 6H 6 interaction.     

Rhodium-catalyzed dehydrocoupling of fluorinated phosphine-borane adducts: synthesis, characterization, and properties of cyclic and polymeric phosphinoboranes with electron-withdrawing substituents at phosphorus

The dehydrocoupling of the fluorinated secondary phosphine-borane adduct R2PH.BH3 (R = p-CF3C6H4) at 60 degrees C is catalyzed by the rhodium complex [{Rh(mu-Cl)(1,5-cod)}2] to give the four-membered chain R2PH-BH2-R2P-BH3. A mixture of the cyclic trimer [R2P-BH2]3 and tetramer [R2P-BH2]4 was obtained from the same reaction at a more elevated temperature of 100 degrees C. The analogous rhodium-catalyzed dehydrocoupling of the primary phosphine-borane adduct RPH2.BH3 at 60 degrees C gave the high molecular weight polyphosphinoborane polymer [RPH-BH2]n (Mw = 56,170, PDI = 1.67). The molecular weight was investigated by gel permeation chromatography and the compound characterized by multinuclear NMR spectroscopy. Interestingly, the electron-withdrawing fluorinated aryl substituents have an important influence on the reactivity as the dehydrocoupling process occurred efficiently at the mildest temperatures observed for phosphine-borane adducts to date. Thin films of polymeric [RPH-BH2]n (R = p-CF3C6H4) have also been shown to function as effective negative-tone resists towards electron beam (e-beam) lithography (EBL). The resultant patterned bars were characterized by scanning electron microscopy (SEM), atomic force microscopy (AFM) and time-of-flight secondary ion mass spectrometry (TOF-SIMS).     

Copper complexes of mono- and ditopic [(methylthio)methyl]borates: missing links and linked systems en route to copper enzyme models

TMEDA-free (TMEDA: tetramethylethylenediamine) LiCH(2)SMe is a suitable reagent for the selective introduction of (methylthio)methyl groups into PhBBr(2) and its p-silylated derivative Me(3)Si--C(6)H(4)--BBr(2). The resulting compounds, R*--C(6)H(4)--B(Br)(CH(2)SMe) (R*=H: 2; R*=SiMe(3): 7) and PhB(CH(2)SMe)(2) (3), form cyclic dimers through B--S adduct bonds in solution and in the solid state. Compounds 2 and 3 have successfully been used for preparing the (N(2)S) scorpionate [PhBpz(2)(CH(2)SMe)](-) ([5](-)) (pz: pyrazol-1-yl) and the (NS(2)) scorpionate [PhBpz(CH(2)SMe)(2)](-), respectively. Compound 7 proved to be an excellent building block for the heteroditopic poly(pyrazol-1-yl)borate p-[pz(3)B--C(6)H(4)--Bpz(2)(CH(2)SMe)](2-) ([10](2-)) that mimics the two ligation sites of the copper enzymes peptidylglycine alpha-hydroxylating monooxygenase and dopamine beta-monooxygenase. Treatment of the monotopic tripod [5](-) with CuCl and CuBr(2) results in the formation of complexes K[Cu(5)(2)] and [Cu(5)(2)]. An X-ray crystallography study of K[Cu(5)(2)] revealed a tetrahedral (N(2)S(2)) coordination environment for the Cu(I) ion, whereas the Cu(II) ion of [Cu(5)(2)] possesses a square-pyramidal (N(4)S) ligand sphere (S-atom in the axial position). The remarkable redox properties of K[Cu(5)(2)] and [Cu(5)(2)] have been assessed by cyclic voltammetry and quantum chemical calculations. The reaction of K[Cu(5)(2)] with dry air leads to the Cu(II) species [Cu(5)(2)] and to a tetranuclear Cu(II) complex featuring [PhB(O)pz(2)](2-) ligands. Addition of CuCl to K(2)[10] gives the complex K(3)[Cu(10)(2)] containing two ligand molecules per Cu(I) center. The Cu(I) ion binds to both heteroscorpionate moieties and thereby establishes a coordination environment similar to that of the Cu(I) ion in K[Cu(5)(2)].     

Synthesis and characterization of three-coordinate and related beta-diketiminate derivatives of manganese,iron, and cobalt

Treatment of M[N(SiMe(3))(2)](2) (M = Mn, Fe, Co) with various bulky beta-diketimines afforded a variety of new three-coordinate complexes which were characterized by UV-vis, (1)H NMR and IR spectroscopy, magnetic measurements, and X-ray crystallography. Reaction of the beta-diketimine H(Dipp)NC(Me)CHC(Me)N(Dipp) (Dipp(2)N(wedge)NH; Dipp = C(6)H(3)-2,6-Pr(i)(2)) with M[N(SiMe(3))(2)](2) (M = Mn or Co) gave Dipp(2)N(wedge)NMN(SiMe(3))(2) (M = Mn, 1; Co, 3) while the reaction of Fe[N(SiMe(3))(2)](2) with Ar(2)N(wedge)NH (Ar = Dipp, C(6)F(5), Mes, C(6)H(3)-2,6-Me(2), or C(6)H(3)-2,6-Cl(2)) afforded the series of iron complexes Ar(2)N(wedge)NFe[N(SiMe(3))(2)] (Ar = Dipp, 2a; C(6)F(5), 2b; Mes, 2c; C(6)H(3)-2,6-Me(2), 2d; C(6)H(3)-2,6-Cl(2), 2e). This represents a new synthetic route to beta-diketiminate complexes of these metals. The four-coordinate bis-beta-diketiminate complex Fe[N(wedge)N(C(6)F(5))(2)](2), 4, was also isolated as a byproduct from the synthesis of 2b. Direct reaction of the Dipp(2)N(wedge)NLi with CoCl(2) gave the "ate" salt Dipp(2)N(wedge)NCoCl(2)Li(THF)(2), 5, in which the lithium chloride has formed a complex with Dipp(2)N(wedge)NCoCl through chloride bridging. The Fe(III) species Dipp(2)N(wedge)NFeCl(2), 6, was obtained cleanly from the reaction of FeCl(3) with Dipp(2)N(wedge)NLi. Magnetic measurements showed that all the complexes have a high spin configuration. The different substituents in the series of iron complexes 2a-e allowed assignment of their paramagnetically shifted (1)H NMR spectra. The X-ray crystal structures 1-2d and 3 showed that they have a distorted three-coordinate planar configuration at the metals whereas complexes 4-6 have highly distorted four-coordinate geometries.