Sensitive and selective determination of metabolically formed trans-dihydrodiols and phenols of benzo[a]pyrene in water and urine samples by HPLC with amperometric detection

A method has been developed to separate hydroxylated metabolites of the carcinogenic polycyclic aromatic hydrocarbon benzo[a]pyrene, i. e. trans-4,5-, 7,8-, 9,10-dihydrodiol and 1-, 3-, 7-, and 9-phenol, by HPLC with amperometric detection employing an isocratic methanol/water eluent (70:30, v/v) containing 0.5 g/L sulfuric acid and 1 g/L lithium perchlorate. Compared with the usually applied fluorescence (λ_ex = 265 nm, λ_em = 460 nm) and ultraviolet (λ = 265 nm) detection, the amperometric technique is about 2–12 times more sensitive for the determination of all metabolites investigated. The method was applied to the determination of the seven metabolites of benzo[a]pyrene in different water samples and in urine after solid-phase extraction (SPE). The results obtained by HPLC with amperometric detection after SPE enrichment from an aqueous extract of a soil sample and from the urine of a rat intragastrically treated with benzo[a]pyrene agreed well with the values determined with fluorescence and/or UV detection. Received: 20 December 1996 / Revised: 10 March 1997 / Accepted: 30 April 1997     

DNA intercalating studies of [Ru(bpy)<Subscript>2</Subscript>HPIP]<Superscript>2+</Superscript> with intramolecular hydrogen bond ligand based on introduction of copper ion

The effects of copper ion on the interaction of [Ru(bpy)₂HPIP]²⁺(bpy = 2,2′-bipyridine, HPIP = 2-(2-hydroxyphenyl) imidazo [4,5-f] [1, 10] phenanthroline) with DNA have been investigated by electronic absorption spectroscopy and fluorescence spectroscopy. HPIP ligand of the complex with an intramolecular hydrogen bond can bind Cu²⁺ in the absence of DNA, as revealed by the absorbance and fluorescence decrease for [Ru(bpy)₂HPIP]²⁺. The resultant heterometallic complex binds to DNA via intercalation of HPIP into the DNA base pairs and its DNA-binding ability is stronger than [Ru(bpy)₂HPIP]²⁺ itself. The DNA bound [Ru(bpy)₂HPIP]²⁺ cannot bind Cu²⁺ at low Cu²⁺ concentration and the intramolecular hydrogen bond in HPIP is located inside the DNA helix. While the Cu²⁺ concentration is relative high, Cu²⁺ can quench the fluorescence of DNA bound [Ru(bpy)₂HPIP]²⁺. The quenching reason is proposed.     

Spectrofluorometric determination of hesperidin by manual and flow-injection methods

A reliable and highly sensitive method for the determination of hesperidin is described. It involves the formation of a highly fluorescent complex between hesperidin and aluminium (III) in a micellar medium. There is a linear relationship between fluorescence intensity (λ_em = 496 nm, λ_ex = 391 nm) and hesperidin concentration over the range 5 × 10^–7– 2 × 10^–5 mol L^–1. The detection limit is 79 μg L^–1. The method can easily be adapted to a flow system using a three-channel manifold, the peak height being proportional to the hesperidin concentration over the range 1 × 10^–6– 1 × 10^–4 mol L^–1. Manual and flow-injection procedures have been successfully applied to the determination of hesperidin in orange peel and orange juice. Received: 21 October 1998 / Revised: 16 December 1998 / Accepted: 25 December 1998     

Kinetics of Cu<Superscript>2+</Superscript> binding to the poly(acrylic acid) hydrogel

Isothermal kinetics of copper (ion) binding to poly(acrylic acid) (PAA) hydrogel at 20, 25, 35 and 45°C was investigated. Isothermal conversions and kinetic curves of Cu²⁺ binding to the PAA hydrogel were determined. It was found that the well-known kinetic models of Peppas cannot be applied to describing the entire process of Cu²⁺ binding. The new method for the determination of the kinetic model of the Cu²⁺ binding process, as well as the activation energy density distribution functions of PAA hydrogel interaction with Cu²⁺, were established. It was found that Cu²⁺ diffusion to the active centers (with E _a = 9 kJ/mol) has a dominant influence on the kinetics of the process at temperatures T ≥ 30°C, but at T ≥ 30°C and for the degree of bound Cu²⁺ α ≥ 0.2, the interaction of Cu²⁺ from the adsorption center with E _a = 26 kJ/mol is dominant. The text was submitted by the authors in English.     

Fluorescent ratioable recognition of Cu in water using a pyrene-attached macrocycle/γ-cyclodextrin complex

A pyrene-functional fluoroionophore, 1 was used to construct a supramolecular 1/γ-CD complex for Cu²⁺ recognition in water. In aqueous γ-CD solution, 1 exhibits pyrene monomer fluorescence emission at 378 nm and 397 nm, while in the presence of Cu²⁺, it shows a pyrene excimer emission at 452 nm with a decrease in the monomer fluorescence due to the formation of a 1:2 metal-liganded complex. Based on the response characteristics of the supramolecular complex, a fluorescent ratiometric method was performed for the determination of Cu²⁺ concentration in water. With the optimum conditions described, Cu²⁺ in aqueous solution can be determined from 1.2 × 10⁻⁶ to 4.5 × 10⁻⁴ M. The Cu²⁺ selectivity of the complex is excellent, and the excimer fluorescence enhancements are very smaller induced by other heavy metal and transition metal ions.     

Methoxyl-induced fluorescence quenching in N,N′-bridged 9H-dipyrrinones and an X-ray crystal structure

Strongly fluorescent dipyrrinones can be prepared by bridging the pyrrole and lactam nitrogens with a carbonyl group, from reaction with N,N′-carbonyldiimidazole in the presence of a strong, non-nucleophilic base. The yellow, N,N′-carbonyl-bridged dipyrrinones typically have fluorescent quantum yields (φ_F) approaching 1.0. Thus, in chloroform, N,N′-bridged 9H-dipyrrinones with β-alkyl substituents: 2,3-diethyl-7,8-dimethyl has φ_F = 0.90 (λ_em = 465 nm) and 2,3-dimethyl-7,8-dimethoxy has φ_F = 0.84 (λ_em = 482 nm). In contrast, 2,3-dimethoxy-7,8-dimethyl and 2,3,7,8-tetramethoxy show red-shifted λ_em but with strongly reduced φ_F: φ_F = 0.10 (λ_em = 511 nm) and 0.08 (λ_em = 511 nm), respectively. Methoxy substituents on the lactam, but not the pyrrole ring act to quench the fluorescence and shift the emission and excitation wavelengths bathochromically. The first X-ray crystal structure of an N,N′-carbonyl-bridged dipyrrinone was obtained from 7,8-dimethoxy-2,3-dimethyl-10H-dipyrrin-1-one. Correspondence: David A. Lightner, Department of Chemistry, University of Nevada, Reno, Nevada 89557-0020, USA.     

Sensitive determination of nucleotides and polynucleotides based on the fluorescence quenching of the Tb3+-Tiron complex

 A sensitive method using fluorescence quenching for the determination of nucleotides (ATP, ADP, AMP, CTP, UTP) and polynucleotides[poly(A), poly(I), poly(U)] is proposed. It is based on the ability of nucleotides and polynucleotides to inhibit the formation of a strongly fluorescent complex of Tb³⁺ ion with Tiron. The possibilities of spectrofluorimetric measurements of these systems were studied under optimal conditions (pH 6.9 in hexamethylene tetramine-HCl buffer, 1.2×10^-6 mol/L of Tb³⁺, 4.0×10^-6 mol/L of Tiron, λ_ex=317 nm, λ_em=546 nm). The results showed that the Tb³⁺-Tiron complex could be used as a fluorescence test for the phosphate moieties of nucleotides and polynucleotides. The detection limits are 0.3, 1.2, 3.7, 0.2, 0.3, 1.1, 0.6 and 0.9 ng/mL for ATP, ADP, AMP, CTP, UTP, poly(A), poly(I), and poly(U), respectively. The relative standard deviations (6 replicates) are within 4.0% in the middle of the linear range. The fluorescence quenching mechanism of these systems is also discussed. Received: 16 July 1996 / Revised: 13 November 1996 / Accepted: 13 November 1996     

Complex formation of maleic acid with the Zn<Superscript>2+</Superscript>, Ni<Superscript>2+</Superscript>, Co<Superscript>2+</Superscript>, Cu<Superscript>2+</Superscript> in aqueous solution

The process of complex formation of maleic acid (H₂L) with the ions Zn²⁺, Ni²⁺, Co²⁺, Cu²⁺ was studied by potentiometric titration in a wide range of concentration ratios at 298 K and I = 0.1 mol/l (NaNO₃). The moieties ZnL, CoL, NiL, NiL ₂ ^2? , CuL, and CuL ₂ ^2? were detected and their stability constants were determined.     

2-(5-Benzoacridine)ethyl-p-toluenesulfonate as sensitive reagent for the determination of bile acids by HPLC with fluorescence detection and online atmospheric chemical ionization-mass spectrometric identification

2-(5-Benzoacridine)ethyl-p-toluenesulfonate (BAETS), a dual-sensitive probe, was reacted with bile acids in the presence of K₂CO₃ catalyst in dimethyl sulfoxide (DMSO) solvent to give BAETS–bile acid derivatives. Derivatives exhibited intense fluorescence (FL) with an excitation maximum at λ _ex 270 nm and an emission maximum at λ _em 510 nm. MS analysis using APCI-MS indicated that derivatives had excellent APCI-MS ionizability with percentage ionization δ values changing from 0 to 88.83% in aqueous acetonitrile and from 0 to 89.15% in aqueous methanol. The collision induced dissociation spectra of m/z [M + H]⁺ contained specific fragment ions at m/z [M + H−H₂O]⁺, [M + H−2H₂O]⁺, [M + H−3H₂O]⁺, 347.3, and 290.1. Repeatability was good for LC separation of BAETS–bile acid derivatives with aqueous acetonitrile as mobile phase. The relative standard deviations (RSDs) of retention time and peak area at 6.6 nmol mL⁻¹ levels with fluorescence detection (FL) were from 0.045 to 0.072% and from 2.16 to 2.73%, respectively. Excellent linear responses were observed, with regression coefficients >0.9995. The FL detection limits (S/N = 3) were in the range of 18.0–36.1 fmol. The online APCI-MS detection limits are in the range of 500–790 fmol (at a signal-to-noise ratio of 3).     

A new perylene diimide-based colorimetric and fluorescent sensor for selective detection of Cu<Superscript>2+</Superscript> cation

A new perylene diimide (PDI) ligand (1) functionalized with a dipicolylethylenediamine (DPEN) moiety was synthesized and first used as a colorimetric and fluorometric dual-channel sensor to specifically detect the presence of Cu²⁺ over a wide range of other cations. The solution of 1 (10 μmol/L) upon addition of Cu²⁺ displayed distinguishing pink color compared with other cations including K⁺, Ni²⁺, Ca²⁺, Mn²⁺, Na⁺, Sr²⁺, Zn²⁺, Co²⁺, Cd²⁺, Mg²⁺, Cr³⁺, Ag⁺, and Ba²⁺, indicating the sensitivity and selectivity of 1 to Cu²⁺. Thus, the advantage of this assay is that naked-eye detection of Cu²⁺ becomes possible. Moreover, among these metal ions investigated, only Cu²⁺ quenched more than half fluorescent intensity of 1. The ESI-TOF spectrum of a mixture of 1 and CuCl₂ in combination of the fluorescence titration spectra of 1 (10 μmol/L) upon addition of various amounts of Cu²⁺ revealed the formation of a 2:1 metal-ligand complex through the metal coordination interaction. Supported by the National Natural Science Foundation of China (Grant Nos. 20872101 & 20772086)     

Fluorescence enhancement assay for trace iron(II) using Pyr-tempo as a spin label fluorescent probe

Pyrene-tetramethylpiperidinyl (Pyr-Tempo) as a spin label fluorescent probe for iron(II) was synthesized. It exhibited weak fluorescence (λ_exc/λ_em = 346/399 nm) in aqueous solution due to an intramolecular quenching pathway. A method for determination of iron(II) was proposed based on the fluorescence enhancement of the probe in the presence of iron(II) in acidic medium. Under optimum conditions, the fluorescence enhancement of Pyr-Tempo is linearly proportional to the iron(II) concentration range of 6.0 × 10⁻⁸ to 9.6 × 10⁻⁶ mol L⁻¹ with a detection limit of 8.0 × 10⁻⁹ mol L⁻¹. The relative standard deviation (RSD) of six replicate measurements is 1.95% for 3.0 × 10⁻⁷ mol L⁻¹ iron(II). The developed spin label fluorescence probe is found to be rapidly and sensitively responsive to iron(II) with high selectivity compared to existing fluorescence methods. The proposed method was successfully applied to iron(II) detection in five real samples with satisfactory results obtained by manual UV/Vis spectrophotometry (standard method) with 1,10-phenanthroline.     

Novel 1,8-naphthalimide dye for multichannel sensing of H<Superscript>+</Superscript> and Cu<Superscript>2+</Superscript>

A novel 1,8-naphthalimide dye with simple structure has been produced by a facile synthetic method for colorimetric and fluorescent sensing of H⁺ and Cu²⁺. In CH₃CN/H₂O (1/1, v/v), the dye could monitor H⁺ using dual channels (ratiometric absorbance and fluorescence intensity change) from pH 6.2 to 12.0. Meanwhile, in the pH range of 1.9–5.2, the dye could also be used to detect Cu²⁺ using triple channels [ultraviolet–visible (UV–Vis) absorption, fluorescence intensity reduction, as well as fluorescence blueshift]. The detection limits for Cu²⁺ evaluated by colorimetric and fluorescent titration were 6.10 × 10^?7 and 2.62 × 10^?7 M, respectively. The dye exhibited specific selectivity and sensitivity for H⁺ and Cu²⁺ over various coexisting metal ions. Moreover, the sensing mechanism of the dye for H⁺ and Cu²⁺ was carefully examined.     

Kinetic Spectrofluorimetric Determination of Nitrite in Water Samples and Nitrogen Dioxide in the Atmosphere Sampled by the Liquid Droplet Method

 A simple, sensitive and selective kinetic spectrofluorimetric determination of NO₂ sampled by the droplet method in the atmosphere was proposed on the basis of the reaction of safranin O with nitrite. By this reaction, a diazonium salt is formed, which causes a fluorescent reddish-orange dye color of the solution to change into a non fluorescent blue color. The reaction was monitored fluorimetrically by measuring the decrease in fluorescence intensity of safranin O at (λ_ex/λ_em = 536 nm/579 nm) by a fixed-time method. The experimental conditions were optimized. Under the optimum conditions in the concentration range of 7.5–400 ng/ml, a linear calibration curve (r² = 0.9978) was obtained with a detection limit of 7.5 ng/ml. The method was applied successful ly to the determination of nitrite in spiked water and NO₂ in the atmosphere, as sampled by a liquid droplet method. Received August 23, 1999. Revision February 29, 2000.     

Simultaneous dual wavelength spectrophotometric determination of citric and ascorbic acids using an artificial neural network

In this study, a very simple spectrophotometric method for the simultaneous determination of citric and ascorbic acid based on the reaction of these acids with a copper(II)-ammonia complex is presented. The Cu²⁺-NH₃ complex (with λ_max = 600 nm) was decomposed by citrate ion and formed a Cu²⁺-citrate complex (with λ_max = 740 nm). On the other hand, during the reaction of ascorbic acid with copper(II)-ammonia complex, ascorbic acid is oxidized and the copper(II)-ammonia complex is reduced to the copper(I)-ammonia complex and the absorbance decreases to 600 nm. Although there is a spectral overlap between the absorbance spectra of complexes Cu²⁺-NH₃ and Cu²⁺-citrate, they have been simultaneously determined using an artificial neural network (ANN). The absorbances at 600 and 740 nm were used as the input layer. The ANN architectures were different for citric and ascorbic acid. The output of the citric acid ANN architecture was used as an input node for the ascorbic acid ANN architecture. This modification improves the capability of the ascorbic acid ANN model for the prediction of ascorbic acid concentrations. The dynamic ranges for citric and ascorbic acid were 1.0–125.0 and 1.0–35.0 mM, respectively. Finally, the proposed method was successfully applied to the determination of citric and ascorbic acids in vitamin C tablets and some powdered drink mixes. The text was submitted by the authors in English.     

Extraction of metal ions (Fe<Superscript>3+</Superscript>, Co<Superscript>2+</Superscript>, Ni<Superscript>2+</Superscript>, Cu<Superscript>2+</Superscript> and Zn<Superscript>2+</Superscript>) using immobilized-polysiloxane iminobis(n-2-aminophenylacetamide) ligand system

A new insoluble solid functionalized ligand system bearing chelating ligand group of the general formula P-(CH₂)₃-N[CH₂CONH(C₆H₄)NH₂]₂, where P represents [Si–O] _n polysiloxane network, was prepared by the reaction of the immobilized diethyliminodiacetate polysiloxane ligand system, P-(CH₂)₃N(CH₂CO₂Et)₂ with 1,2-diaminobenzene in toluene. ¹³C CP-MAS NMR, XPS and FTIR results showed that most ethylacetate groups (–COOEt) were converted into the amide groups (–N–C=O). The new functionalized ligand system exhibits high capacity for extraction and removal of the metal ions (Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺ and Zn²⁺) with efficiency of 95–97% after recovery from its primary metal complexes. This functionalized ligand system formed 1:1 metal to ligand complexes.     

Analysis of ofloxacin in plasma samples by high-performance liquid chromatography

Summary A sensitive HPLC method has been developed for determination of ofloxacin (OFL) in biological fluids. Sample preparation was performed by adding phosphate buffer (pH 7.4, 0.1m) then extraction with trichloromethane. OFL and the internal standard, sarafloxacin (SAR), were separated on a reversed-phase column with aqueous phosphate solution-acetonitrile, 80∶20, as mobile phase. The fluorescence of the column effluent was monitored at λ_ex 338 and λ_em 425 nm. The retention times were 2.66 and 4.24 min for OFL and SAR, respectively, and the detection and quantitation limits were 8 and 15 ng mL⁻¹, respectively. Plots of response against ofloxacin concentration were linear in the range 8 to 2000 ng mL⁻¹. Recovery was 92.9% for OFL.     

Separation of L-DOPA and four metabolites in plasma using a porous graphitic carbon column in capillary liquid chromatography

Summary A sensitive HPLC method with marbofloxacin (MAR) as internal standard and fluorescence detection is described for the analysis of ofloxacin (OFL) enantiomers in plasma samples. Plasma samples were prepared by adding phosphate buffer (pH 7.4, 0.1m), then extracted with trichloromethane.S-OFL,R-OFL, and the internal standard were separated on a reversed-phase column with water-methanol, 85.5∶14.5, as mobile phase. The concentrations ofS-OFL andR-OFL eluting from the column (retention times 7.5 and 8.7 min, respectively) were monitored by fluorescence detection withλ _ex = 331 andλ _em = 488 nm. The detection and quantitation limits were 10 and 20 ng mL⁻¹, respectively, forS-OFL and 11 and 21 ng mL⁻¹ forR-OFL. Response was linearly related to concentration in the range 10 to 2500 ng mL⁻¹. Recovery was close to 93% for both compounds. The method was applied to determination of the enantiomers of OFL in plasma samples collected during pharmacokinetic studies.     

FRET-derived ratiometric fluorescence sensor for Cu

New N-(pyrenylmethyl)naphtho-azacrown-5 (1) was synthesized as an ‘On-Off’ fluorescent chemosensor for Cu²⁺. Excited at 240 nm corresponding to the absorption of naphthalene unit (energy donor) of 1, emission at 380 nm from pyrene unit (energy acceptor) is observed, indicating that intramolecular fluorescence resonance energy transfer (FRET-On) occurs in 1. When Cu²⁺ is added to a solution of 1, however, the fluorescence of pyrene is strongly quenched (FRET-Off) whereas that of naphthalene group is revived. Such FRET ‘On-Off’ behavior of 1 is observed only in the case of Cu²⁺ binding, but not for other metal cations. The high selectivity of 1 toward Cu²⁺ can be potentially applied to a new kind of FRET-based chemosensor. The FRET On-Off behavior is supported by computational studies. The calculated molecular orbitals of HOMO and LUMOs suggest the excited-state interactions leading to FRET from naphthalene to pyrene in 1, but no electron density changes in 1·Cu²⁺ complex.     

Determination of trace rhodium by supramolecular catalytic kinetic spectrofluorimetry of β-CD-rhodium-KBrO3-vanillin salicylhydrazone

A sensitive catalytic kinetic spectrofluorimetric approach for determining ng mL⁻¹ levels of rhodium is presented, and the possible mechanism of the catalytic reaction was investigated. The determination is based on the catalytic property of rhodium to enhance the reaction of o-vanillin salicylhydrazone (OVSH) with potassium bromate in a water-ethanol medium at pH 4.80 and 45 °C. The presence of β-cyclodextrin (β-CD) obviously sensitized the assay due to its high inclusion ability towards OVSH. Under optimized experimental conditions, fluorescence measurements of the β-CD-rhodium-KBrO₃-OVSH catalytic kinetic reaction system were carried out in its fluorescent band centered at λ_ex = 333 nm and λ_em = 476 nm, respectively. The calibration graph was linear over the concentration range of 0.47–100 ng mL⁻¹ with a detection limit of 0.14 ng mL⁻¹. The effect of interferences was discussed, and the results show that the extraction method can be used to separate rhodium from interference species such as iridium. The proposed method, applied to several synthetic mixtures containing rhodium mixed with varying amounts of metal salts, produced satisfactory results.     

A new fluorescent sensor selective for Pb<Superscript>2+</Superscript> in water capable of two-photon-induced fluorescence measurement

A new fluorescent sensor (1) for Pb²⁺ containing a 1,4-dicyano-2,5-bis(styryl)benzene fluorophore and 2-(N,N′-bis(carboxylmethyl))amino-1-carboxylmethoxylbenzene as receptor has been synthesized. The sensor selectively responds to Pb²⁺ in the aqueous environment, and brings about similar and significant changes in one- and two-photon excited emission spectra: λ _max red-shift from 460 (519) to 590 nm. The selective response is pH-independent in a large physiological pH range, and two-photon action cross section (ϕδ) is 51 GM (1 GM = 1×10⁻⁵⁰ cm⁴·s·photon⁻¹·molecule⁻¹) at 740 nm. Supported by the National Natural Science Foundation of China (Grant Nos. 20705621 & 20706008), the National Basic Research Project of China (Grant No. 2009CB724706), the Ministry of Education of China, Changjiang Scholars Innovative Research Team in University (Grant No. IRT0711) and Cultivation Fund of the Key Scientific and Technical Innovation Project (Grant No. 707016)