Spectroscopic characterization of the oxo-transfer reaction from a bis(mu-oxo)dicopper(III) complex to triphenylphosphine

The oxygen-atom transfer reaction from the bis(mu-oxo)dicopper(III) complex [Cu(III)(2)(mu-O)(2)(L)(2)](2+), where L =N,N,N',N' -tetraethylethylenediamine, to PPh(3) has been studied by UV-vis, EPR, (1)H NMR and Cu K-edge X-ray absorption spectroscopy in parallel at low temperatures (193 K) and above. Under aerobic conditions (excess dioxygen), 1 reacted with PPh(3), giving O=Ph(3) and a diamagnetic species that has been assigned to an oxo-bridged dicopper(II) complex on the basis of EPR and Cu K-edge X-ray absorption spectroscopic data. Isotope-labeling experiments ((18)O(2)) established that the oxygen atom incorporated into the triphenylphosphine oxide came from both complex 1 and exogenous dioxygen. Detailed kinetic studies revealed that the process is a third-order reaction; the rate law is first order in both complex 1 and triphenylphosphine, as well as in dioxygen. At temperatures above 233 K, reaction of 1 with PPh(3) was accompanied by ligand degradation, leading to oxidative N-dealkylation of one of the ethyl groups. By contrast, when the reaction was performed in the absence of excess dioxygen, negligible substrate (PPh(3)) oxidation was observed. Instead, highly symmetrical copper complexes with a characteristic isotropic EPR signal at g= 2.11 were formed. These results are discussed in terms of parallel reaction channels that are activated under various conditions of temperature and dioxygen.     

Dicopper(I) complexes of unsymmetrical binucleating ligands and their dioxygen reactivities

The design, synthesis, and characterization of binuclear copper(I) complexes and investigations of their dioxygen reactivities are of interest in understanding fundamental aspects of copper/O2 reactivity and in modeling copper enzyme active-site chemistry. In the latter regard, unsymmetrical binuclear systems are of interest. Here, we describe the chemistry of new unsymmetrical binuclear copper complexes, starting with the binucleating ligand UN2-H, possessing a m-xylyl moiety linking a bis[2-(2-pyridyl)ethyl]amine (PY2) tridentate chelator and a 2-[2-(methylamino)ethyl]pyridine bidentate group. Dicopper(I) complexes of UN2-H, [Cu2(UN2-H)]2+ (1), as PF6- and ClO4- salts, are synthesized. These react with O2 (Cu:O2 = 2:1, manometry) resulting in the hydroxylation of the xylyl moiety, producing the phenoxohydroxodicopper(II) complex [Cu2(UN2-O-)(OH-)(CH3CN)]2+ (2). Compound 2(PF6)2 is characterized by X-ray crystallography, which reveals features similar to those of a structure described previously (Karlin, K. D.; et al. J. Am. Chem. Soc. 1984, 106, 2121-2128) for a symmetrical binucleating analogue having two tridentate PY2 moieties; here a CH3CN ligand replaces one pyridylethyl arm. Isotope labeling from a reaction of 1 using 18O2 shows that the ligand UN2-OH, extracted from 2, possesses an 18O-labeled phenol oxygen atom. Thus, the transformation 1 + O2-->2 represents a monooxygenase model system. [CuI2(UN2-OH)(CH3CN)]2+ (3), a new binuclear dicopper(I) complex with an unsymmetrical coordination environment is generated either by reduction of 2 with diphenylhydrazine or in reactions of cuprous salts with UN2-OH. Complex 3 reacts with O2 at -80 degrees C, producing the (mu-1,1-hydroperoxo)dicopper(II) complex [CuII2(UN2-O-)(OOH-)]2+ (4) (lambda max 390 nm (epsilon 4200 M-1 cm-1), formulated on the basis of the stoichiometry of O2 uptake by 3 (Cu:O2 = 2:1, manometry), its reaction with PPh3 giving O=PPh3 (85%), and comparison to previously studied close analogues. Discussions include the relevance and comparison to other copper bioinorganic chemistry.     

Copper(I) complex O(2)-reactivity with a N(3)S thioether ligand: a copper-dioxygen adduct including sulfur ligation, ligand oxygenation, and comparisons with all nitrogen ligand analogues

In order to contribute to an understanding of the effects of thioether sulfur ligation in copper-O(2) reactivity, the tetradentate ligands L(N3S) (2-ethylthio-N,N-bis(pyridin-2-yl)methylethanamine) and L(N3S')(2-ethylthio-N,N-bis(pyridin-2-yl)ethylethanamine) have been synthesized. Corresponding copper(I) complexes, [CuI(L(N3S))]ClO(4) (1-ClO(4)), [CuI(L(N3S))]B(C(6)F(5))(4) (1-B(C(6)F(5))(4)), and [CuI(L(N3S'))]ClO(4) (2), were generated, and their redox properties, CO binding, and O(2)-reactivity were compared to the situation with analogous compounds having all nitrogen donor ligands, [CuI(TMPA)(MeCN)](+) and [Cu(I)(PMAP)](+) (TMPA = tris(2-pyridylmethyl)amine; PMAP = bis[2-(2-pyridyl)ethyl]-(2-pyridyl)methylamine). X-ray structures of 1-B(C(6)F(5))(4), a dimer, and copper(II) complex [Cu(II)(L(N3S))(MeOH)](ClO(4))(2) (3) were obtained; the latter possesses axial thioether coordination. At low temperature in CH(2)Cl(2), acetone, or 2-methyltetrahydrofuran (MeTHF), 1 reacts with O(2) and generates an adduct formulated as an end-on peroxodicopper(II) complex [{Cu(II)(L(N3S))}(2)(mu-1,2-O(2)(2-))](2+) (4)){lambda(max) = 530 (epsilon approximately 9200 M(-1) cm(-1)) and 605 nm (epsilon approximately 11,800 M(-1) cm(-1))}; the number and relative intensity of LMCT UV-vis bands vary from those for [{Cu(II)(TMPA)}(2)(O(2)(2-))](2+) {lambda(max) = 524 nm (epsilon = 11,300 M(-1) cm(-1)) and 615 nm (epsilon = 5800 M(-1) cm(-1))} and are ascribed to electronic structure variation due to coordination geometry changes with the L(N3S) ligand. Resonance Raman spectroscopy confirms the end-on peroxo-formulation {nu(O-O) = 817 cm(-1) (16-18O(2) Delta = 46 cm(-1)) and nu(Cu-O) = 545 cm(-1) (16-18O(2) Delta = 26 cm(-1)); these values are lower in energy than those for [{Cu(II)(TMPA)}(2)(O(2)(2-))](2+) {nu(Cu-O) = 561 cm(-1) and nu(O-O) = 827 cm(-1)} and can be attributed to less electron density donation from the peroxide pi* orbitals to the Cu(II) ion. Complex 4 is the first copper-dioxygen adduct with thioether ligation; direct evidence comes from EXAFS spectroscopy {Cu K-edge; Cu-S = 2.4 Angstrom}. Following a [Cu(I)(L(N3S))](+)/O(2) reaction and warming, the L(N3S) thioether ligand is oxidized to the sulfoxide in a reaction modeling copper monooxygenase activity. By contrast, 2 is unreactive toward dioxygen probably due to its significantly increased Cu(II)/Cu(I) redox potential, an effect of ligand chelate ring size (in comparison to 1). Discussion of the relevance of the chemistry to copper enzyme O(2)-activation, and situations of biological stress involving methionine oxidation, is provided.     

2-Benzoylpyridine thiosemicarbazone as a novel reagent for the single pot synthesis of dinuclear Cu(I)-Cu(II) complexes: formation of stable copper(II)-iodide bonds

2-Benzoylpyridine thiosemicarbazone {R(1)R(2)C(2)=N(2)·N(3)H-C(1)(=S)-N(4)H(2), R(1) = py-N(1), R(2) = Ph; Hbpytsc} with copper(I) iodide in acetonitrile-dichloromethane mixture has formed stable Cu(II)-I bonds in a dark green Cu(II) iodo-bridged dimer, [Cu(2)(II)(μ-I)(2)(η(3)-N(1),N(2),S-bpytsc)(2)] 1. Copper(I) bromide also formed similar Cu(II)-Br bonds in a dark green Cu(II) bromo-bridged dimer, [Cu(2)(II)(μ-Br)(2)(η(3)-N(1),N(2),S-bpytsc)(2)] 3. The formation of dimers 1 and 3 appears to be due to a proton coupled electron transfer (PCET) process wherein copper(I) loses an electron to form copper(II), and this is accompanied by a loss of -N(3)H proton of Hbpytsc ligand resulting in the formation of anionic bpytsc(-). When copper(I) iodide was reacted with triphenylphosphine (PPh(3)) in acetonitrile followed by the addition of 2-benzoylpyridine thiosemicarbazone in dichloromethane (Cu?:?PPh(3)?:?Hbpytsc in the molar ratio 1:1:1), both Cu(II) dimer 1 and an orange Cu(I) sulfur-bridged dimer, [Cu(2)(I)I(2)(μ-S-Hbpytsc)(2)(PPh(3))(2)] 2 were formed. Copper(I) bromide with PPh(3) and Hbpytsc also formed Cu(II) dimer 3 and an orange Cu(I) sulfur-bridged dimer, [Cu(2)(I)Br(2)(μ-S-Hbpytsc)(2)(PPh(3))(2)] 4. While complexes 2 and 4 exist as sulfur-bridged Cu(I) dimers, 1 and 3 are halogen-bridged. The central Cu(2)S(2) cores of 2 and 4 as well as Cu(2)X(2) of 1 (X = I) and 3 (X = Br) are parallelograms. One set of Cu(II)-I and Cu(II)-Br bonds are short, while the second set is very long {1, Cu-I, 2.565(1), 3.313(1) ?; 3, Cu-Br, 2.391(1), 3.111(1) ?}. The Cu···Cu separations are long in all four complexes {1, 4.126(1); 2, 3.857(1); 3, 3.227(1); 4, 3.285(1) ?}, more than twice the van der Waals radius of a Cu atom, 2.80 ?. The pyridyl group appears to be necessary for stabilizing the Cu(II)-I bond, as this group can accept π-electrons from the metal.     

Mononuclear and dinuclear copper(I) complexes of bis(3,5-dimethylpyrazol-1-yl)methane: synthesis, structure, and reactivity

The synthesis and structures of a mononuclear copper(I) carbonyl complex [Cu(OClO3)(CO)(H2CPz2')] (3) and a dinuclear copper(I) carbonyl complex [{Cu(CO)(H2CPz2')}2(mu-pyrazine)](ClO4)2 (4), where H2CPz2' = bis(3,5-dimethylpyrazol-1-yl)methane, are described. These two compounds were generated by the carbonylation of the corresponding copper(I)-acetonitrile complexes, [Cu(H2CPz2')(MeCN)](ClO4) (1) and [{Cu(H2CPz2')(MeCN)}2(mu-pyrazine)](ClO4)2 (2). Alternatively, treatment of mononuclear 1 and 3, respectively, with pyrazine in a molar ratio of 2:1 produces the pyrazine-bridged dinuclear Cu(I) complexes 2 and 4. Each of the complexes 1-4 can react with PPh3 to generate a common three-coordinated copper(I) complex [Cu(PPh3)(H2CPz2')](ClO4) (5). The structures of complexes 1-5 were all confirmed by X-ray crystallography. Comparison of the Cu(I)-C(CO) bond distances and the CO stretching frequencies of 3 and 4 indicates the back-donating properties of d pi(Cu)-pi*(pyrazine) bonds in 4, and accordingly, stabilizes the mixed-valence species generated from 2. Complex 3, stabilized by the strong interaction between copper(I) ion and perchlorate counteranion (Cu(I)-O(ClO4) = 2.240(3) A), is a potential precursor for polynuclear copper(I) carbonyl complexes.     

Mononuclear and binuclear copper(I) complexes ligated by bis(3,5-diisopropyl-1-pyrazolyl)methane: insight into the fundamental coordination chemistry of three-coordinate copper(I) complexes with a neutral coligand

By using the neutral bidentate nitrogen-containing ligand, bis(3,5-diisopropyl-1-pyrazolyl)methane (L1' '), the copper(I) complexes [Cu(L1' ')2](CuCl2) (1CuCl2), [Cu(L1' ')2](ClO4) (1ClO4), [Cu(L1' ')]2(ClO4)2 (2ClO4), [Cu(L1' ')]2(BF4)2 (2BF4), [Cu(L1' ')(NCMe)](PF6) (3PF6), [Cu(L1' ')(PPh3)](ClO4) (4ClO4), [Cu(L1' ')(PPh3)](PF6) (4PF6), [{Cu(L1' ')(CO)}2(mu-ClO4)](ClO4) (5ClO4), and the copper(II) complexes [{Cu(L1' ')}2(mu-OH)2(mu-ClO4)2] (6), and [Cu(L1' ')Cl2] (7) were systematically synthesized and fully characterized by X-ray crystallography and by IR and 1H NMR spectroscopy. In the case of copper(II), ESR spectroscopy was also applied. In comparison with the related neutral tridentate ligand L1', bis-chelated copper(I) complexes and binuclear linear-coordinated copper(I) complexes are easy to obtain with L1' ', like 1CuCl2, 1ClO4, 2ClO4, and 2BF4. Importantly, stronger and bulkier ligands such as acetonitrile (3PF6) and especially triphenylphosphine (4ClO4 and 4PF6) generate three-coordinate structures with a trigonal-planar geometry. Surprisingly, for the smaller ligand carbon monoxide, a mononuclear three-coordinate structure is very unstable, leading to the formation of a binuclear complex (5ClO4) with one bridging perchlorate anion, such that the copper(I) centers are four-coordinate. The same tendency is observed for the copper(II) bis(mu-hydroxo) compounds 6, which is additionally bridged by two perchlorate anions. Both copper(II) complexes 6 and 7 were obtained by molecular O2 oxidation of the corresponding copper(I) complexes. A comparison of the new copper(I) triphenylphosphine complexes 4ClO4 and 4PF6 with corresponding species obtained with the related tridentate ligands L1' and L1 (8ClO4 and 9, respectively) reveals surprisingly small differences in their spectroscopic properties. Density functional theory (DFT) calculations are used to shed light on the differences in bonding in these compounds and the spectral assignments. Finally, the reactivity of the different bis(pyrazolyl)methane complexes obtained here toward PPh3, CO, and O2 is discussed.     

Dioxygen activation of a trinuclear Cu(I)Cu(I)Cu(I) cluster capable of mediating facile oxidation of organic substrates: competition between O-atom transfer and abortive intercomplex reduction

The dioxygen activation of a series of Cu(I)Cu(I)Cu(I) complexes based on the ligands (L) 3,3'-(1,4-diazepane- 1,4-diyl)bis(1-{[2-(dimethylamino)ethyl](methyl)amino}propan-2-ol)(7-Me) or 3,3'-(1,4-diazepane-1,4-diyl)bis(1-{[2-(diethylamino)ethyl](ethyl)amino}propan-2-ol)(7-Et) forms an intermediate capable of mediating facile O-atom transfer to simple organic substrates at room temperature. To elucidate the dioxygen chemistry, we have examined the reactions of 7-Me, 7-Et, and 3,3'-(1,4-diazepane-1,4-diyl)bis[1-(4-methylpiperazin-1-yl)propan-2-ol] (7-N-Meppz) with dioxygen at -80, -55, and -35?°C in propionitrile (EtCN) by UV-visible, 77?K EPR, and X-ray absorption spectroscopy, and 7-N-Meppz and 7-Me with dioxygen at room temperature in acetonitrile (MeCN) by diode array spectrophotometry. At both -80 and -55?°C, the mixing of the starting [Cu(I)Cu(I)Cu(I)(L)](1+) complex (1) with O(2)-saturated propionitrile (EtCN) led to a bright green solution consisting of two paramagnetic species: the green dioxygen adduct [Cu(II)Cu(II)(μ-η(2):η(2)-peroxo)Cu(II)(L)](2+) (2) and the blue [Cu(II)Cu(II)(μ-O)Cu(II)(L)](2+) species (3). These observations are consistent with the initial formation of [Cu(II)Cu(II)(μ-O)(2)Cu(III)(L)](1+)(4), followed by rapid abortion of this highly reactive species by intercluster electron transfer from a second molecule of complex 1 to give the blue species 3 and subsequent oxygenation of the partially oxidized [Cu(II)Cu(I)Cu(I)(L)](2+)(5) to form the green dioxygen adduct 2. Assignment of 2 to [Cu(II)Cu(II)(μ-η(2):η(2)-peroxo)Cu(II)(L)](2+) is consistent with its reactivity with water to give H(2)O(2) and the blue species 3, as well as its propensity to be photoreduced in the X-ray beam during X-ray absorption experiments at room temperature. In light of these observations, the development of an oxidation catalyst based on the tricopper system requires consideration of the following design criteria: 1)?rapid dioxygen chemistry; 2)?facile O-atom transfer from the activated cluster to substrate; and 3)?a suitable reductant to rapidly regenerate complex 1 to accomplish efficient catalytic turnover.     

Reversible binding of dioxygen by the copper(I) complex with tris(2-dimethylaminoethyl)amine (Me6tren) ligand

At low temperatures, the mononuclear copper(I) complex of the tetradentate tripodal aliphatic amine Me(6)tren (Me(6)tren = tris(2-dimethylaminoethyl)amine) [Cu(I)(Me(6)tren)(RCN)](+) first reversibly binds dioxygen to form a 1:1 Cu-O(2) species which further reacts reversibly with a second [Cu(I)(Me(6)tren)(RCN)](+) ion to form the dinuclear 2:1 Cu(2)O(2) adduct. The reaction can be observed using low temperature stopped-flow techniques. The copper superoxo complex as well as the peroxo complex were characterized by resonance Raman spectroscopy. The spectral characteristics and full kinetic and thermodynamic results for the reaction of [Cu(I)(Me(6)tren)(RCN)](+) with dioxygen are reported.     

Syntheses and structures of copper(I) complexes based on Cu(n)X(n) (X = Br and I; n = 1, 2 and 4) units and bis(pyridyl) ligands with longer flexible spacer

Self-assembly of four bis(pyridyl) ligands with longer flexible spacer: 1,4-bis(3-pyridylaminomethyl)benzene (L1), 1,4-bis(2-pyridylaminomethyl)benzene (L2), 1,3-bis(3-pyridylaminomethyl)benzene (L3) and 1,3-bis(2-pyridylaminomethyl)benzene (L4), and CuX (X = Br and I) leads to the formation of eight [Cu(n)X(n)]-based (X = Br and I; n = 1, 2, and 4) complexes, [Cu(2)I(2)L1(PPh(3))(4)] (1), [Cu(4)Cl(2)Br(2)(L4)(2)(PPh(3))(6)]·(CH(3)CN)(2) (2), [Cu(2)I(2)(L3)(2)] (3), {[Cu(2)Br(2)L2(PPh(3))(2)]·(CH(2)Cl(2))(2)}(n) (4), [CuIL1](n)·nCH(2)Cl(2) (5), [CuIL1](n) (6), [CuIL4](n) (7) and [Cu(2)I(2)L4](n) (8), which have been synthesized and characterized by elemental analysis, IR, TG, powder and single-crystal X-ray diffraction. Structural analyses show that the eight complexes possess an increasing dimensionality from 0D (1-3) to 1D (4) to 2D (5-8), in which 1 and 2 contain a CuX unit, 2-7 contain a Cu(2)X(2) unit and 8 contains a Cu(4)X(4) unit. Such evolvement indicates that the conformation of flexible bis(pyridyl) ligands and the participation of triphenylphosphine (PPh(3)) as a second ligand take an essential role in the framework formation of the Cu(i) complexes. Moreover, a pair of symmetry-related L3 ligands in complex 3 coordinate to the rhomboid Cu(2)I(2) dimer to form "handcuff-shaped" dinuclear structures, which are further joined together through intermolecular N-HI hydrogen bonds to furnish a 2D (4,4) layer. Although complexes 5 and 6 exhibit a similar 2D (4,4) layer constructed from L1 ligand bridging [Cu(2)I(2)](n) units, the different packing fashion of the layers leads to the formation of 3D porous frameworks of 5 and dense 3D frameworks of 6. The "twisted-boat" conformation of the Cu(4)I(4) tetramer unit in complex 8 has not been reported so far.     

Cu(I) or Cu(I)-Cu(II) mixed-valence complexes of 2,4,6-Tri(2-pyridyl)-1,3,5-triazine: syntheses, structures, and theoretical study of the hydrolytic reaction mechanism

The reactions of 2,4,6-tri(2-pyridyl)-1,3,5-triazine (tpt) with copper(I) halides under solvothermal or traditional conditions yielded two polymeric Cu(I) complexes [Cu2I2(tpt)]n (1) and [Cu3I3(tpt)]n (2), one mixed-valence Cu(I)-Cu(II) complex [Cu4Cl2I4(tpt)2] (3), and two Cu(II) complexes [CuBr(bpca)] (4) and [CuI(bpca)] (5) (bpca = bis(2-pyridylcarbonyl)amine). Complex 1 is a zigzag chain with tpt in a bis-bipyridine-like coordination mode, whereas complex 2 with tpt chelating three Cu(I) cations is a ladderlike coordination polymer. Complex 3 is mixed-valence, with Cu(I) in a distorted tetrahedral geometry and Cu(II) in a distorted square pyramidal geometry, forming a ladderlike supramolecular chain. Complexes 4 and 5 are the products of in situ hydrolysis of tpt involving the oxidation of Cu(I). The synthesis and characterization of complex 1, 2, and 5 indicated that Cu(I) cannot promote the hydrolysis of tpt. The theoretical study shows that the main effect for hydrolysis of tpt is the electron-withdrawing effect of metal ions.     

Copper(I) complexes, copper(I)/O(2) reactivity, and copper(II) complex adducts, with a series of tetradentate tripyridylalkylamine tripodal ligands

Copper(I) and copper(II) complexes possessing a series of related ligands with pyridyl-containing donors have been investigated. The ligands are tris(2-pyridylmethyl)amine (tmpa), bis[(2-pyridyl)methyl]-2-(2-pyridyl)ethylamine (pmea), bis[2-(2-pyridyl)ethyl]-(2-pyridyl)methylamine (pmap), and tris[2-(2-pyridyl)ethyl]amine (tepa). The crystal structures of the protonated ligand H(tepa)ClO(4), the copper(I) complexes [Cu(pmea)]PF(6) (1b-PF(6)), [Cu(pmap)]PF(6) (1c-PF(6)), and copper(II) complexes [Cu(pmea)Cl]ClO(4).H(2)O (2b-ClO(4).H(2)O), [Cu(pmap)Cl]ClO(4).H(2)O (2c-ClO(4).H(2)O), [Cu(pmap)Cl]ClO(4) (2c-ClO(4)), and [Cu(pmea)F](2)(PF(6))(2) (3b-PF(6)) were determined. Crystal data: H(tepa)ClO(4), formula C(21)H(25)ClN(4)O(4), triclinic space group P1, Z = 2, a = 10.386(2) A, b = 10.723(2) A, c = 11.663(2) A, alpha = 108.77(3) degrees, beta = 113.81(3) degrees, gamma = 90.39(3) degrees; 1b-PF(6), formula C(19)H(20)CuF(6)N(4)P, orthorhombic space group Pbca, Z = 8, a = 14.413(3) A, b = 16.043(3) A, c = 18.288(4) A, alpha = beta = gamma = 90 degrees; (1c-PF(6)), formula C(20)H(22)CuF(6)N(4)P, orthorhombic space group Pbca, Z = 8, a = 13.306(3) A, b = 16.936(3) A, c = 19.163(4) A, alpha = beta = gamma = 90 degrees; 2b-ClO(4).H(2)O, formula C(19)H(22)Cl(2)CuN(4)O(5), triclinic space group P1, Z = 4, a = 11.967(2) A, b = 12.445(3) A, c = 15.668(3) A, alpha = 84.65(3) degrees, beta = 68.57(3) degrees, gamma = 87.33(3) degrees; 2c-ClO(4).H(2)O, formula C(20)H(24)Cl(2)CuN(4)O(5), monoclinic space group P2(1)/c, Z = 4, a = 11.2927(5) A, b = 13.2389(4) A, c = 15.0939(8) A, alpha = gamma = 90 degrees, beta = 97.397(2) degrees; 2c-ClO(4), formula C(20)H(22)Cl(2)CuN(4)O(4), monoclinic space group P2(1)/c, Z = 4, a = 8.7682(4) A, b = 18.4968(10) A, c = 13.2575(8) A, alpha = gamma = 90 degrees, beta = 94.219(4) degrees; 3b-PF(6), formula [C(19)H(20)CuF(7)N(4)P](2), monoclinic space group P2(1)/n, Z = 2, a = 11.620(5) A, b = 12.752(5) A, c = 15.424(6) A, alpha = gamma = 90 degrees, beta = 109.56(3) degrees. The oxidation of the copper(I) complexes with dioxygen was studied. [Cu(tmpa)(CH(3)CN)](+) (1a) reacts with dioxygen to form a dinuclear peroxo complex that is stable at low temperatures. In contrast, only a very labile peroxo complex was observed spectroscopically when 1b was reacted with dioxygen at low temperatures using stopped-flow kinetic techniques. No dioxygen adduct was detected spectroscopically during the oxidation of 1c, and 1d was found to be unreactive toward dioxygen. Reaction of dioxygen with 1a-PF(6), 1b-PF(6), and 1c-PF(6) at ambient temperatures leads to fluoride-bridged dinuclear copper(II) complexes as products. All copper(II) complexes were characterized by UV-vis, EPR, and electrochemical measurements. The results manifest the dramatic effects of ligand variations and particularly chelate ring size on structure and reactivity.     

Tetradentate bis(o-iminobenzosemiquinonate(1-)) pi radical ligands and their o-aminophenolate(1-) derivatives in complexes of nickel(II), palladium(II), and copper(II)

The coordination chemistries of the potential tetradentate ligands N,N'-bis(3,5-di-tert-butyl-2-hydroxyphenyl)ethylenediamine, H4[L1], the unsaturated analogue glyoxal-bis(2-hydroxy-3,5-di-tert-butylanil), H2[L2], and N,N'-bis(2-hydroxy-3,5-di-tert-butylphenyl)-2,2-dimethylpropylenediamine, H4[L3], have been investigated with nickel(II), palladium(II), and copper(II). The complexes prepared and characterized are [Ni(II)(H3L1)2] (1), [Ni(II)(HL2)2].5/8CH2Cl2 (2), [Ni(II)(L3**)] (3), [Pd(II)(L3**)][Pd(II)(H2L3) (4), and [Cu(II)(H2O)(L4)] (5), where (L4)2- is the oxidized diimine form of (L3)4- and (L3**)2- is the bis(o-iminosemiquinonate) diradical form of (L3)4-. The structures of compounds 1-5 have been determined by single crystal X-ray crystallography. In complexes 1 and 2, the ligands (H3L1)- and (HL2)- are tridentate and the nickel ions are in an octahedral ligand environment. The oxidation level of the ligands is that of an aromatic o-aminophenol. 1 and 2 are paramagnetic (mu(eff) approximately 3.2 mu(B) at 300 K), indicating an S = 1 ground state. The diamagnetic, square planar, four-coordinate complexes 3 and [Pd(II)(L3**)] in 4 each contain two antiferromagnetically coupled o-iminobenzosemiquinonate(1-) pi radicals. Diamagnetic [Pd(II)(H2L3)] in 4 forms an eclipsed dimer via four N-H.O hydrogen bonding contacts which yields a nonbonding Pd.Pd contact of 3.0846(4) A. Complex 5 contains a five-coordinate Cu(II) ion and two o-aminophenolate(1-) halves in (L4)2-. The electrochemistries of complexes 3 and 4a ([Pd(II)(L3**)] of 4) have been investigated, and the EPR spectra of the monocations and -anions are reported.     

Reactivity study of a hydroperoxodicopper(II) complex: hydroxylation, dehydrogenation, and ligand cross-link reactions

Employing a binucleating phenol-containing ligand PD'OH, a mu-phenoxo-mu-hydroperoxo dicopper(II) complex [Cu(II)2(PD'O-)(-OOH)(RCN)2](ClO4)2 (1, R = CH3, CH3CH2 or C6H5CH2; lambda(max) = 407 nm; nu(O-O) = 870 cm(-1); J. Am. Chem. Soc. 2005, 127, 15360) is generated by reacting a precursor dicopper(I) complex [Cu(I)2(PD'OH)(CH3CN)2](ClO4)2 (2) with O2 in nitrile solvents at -80 degrees C. Species 1 is unable to oxidize externally added substrates, for instance, PPh3, 2,4-tert-butylphenol, or 9,10-dihydroanthracene. However, upon thermal decay, it hydroxylates copper-bound organocyanides (e.g., benzylcyanide), leading to the corresponding aldehyde while releasing cyanide. This chemistry mimics that known for the copper enzyme dopamine-beta-monooxygenase. The thermal decay of 1 also leads to a product [Cu(II)3(L")2(Cl-)2](PF6)2 (6); its X-ray structure reveals that L" is a Schiff base-containing ligand which apparently derives from both oxidative N-dealkylation and then oxidative dehydrogenation of PD'OH; the chloride presumably derives from the CH2Cl2 solvent. With an excess of PPh3 added to 1, a binuclear Cu(I) complex [Cu(I)2(L')(PPh3)2](ClO4)2 (5) with a cross-linked PD'OH ligand L' has also been identified and crystallographically and chemically characterized. The newly formed C-O bond and an apparent k(H)/k(D) = 2.9 +/- 0.2 isotope effect in the benzylcyanide oxidation reaction suggest a common ligand-based radical forms during compound 1 thermal decay reactions. A di-mu-hydroxide-bridged tetranuclear copper(II) cluster compound [{Cu(II)2(PD'O-)(OH-)}2](ClO4)4 (8) has also been isolated following warming of 1. Its formation is consistent with the generation of [Cu(II)2(PD'O-)(OH-)]2+, with dimerization a reflection of the large Cu...Cu distance and thus the preference for not having a second bridging ligand atom (in addition to the phenolate O) for dicopper(II) ligation within the PD'O- ligand framework.     

Synthesis, structure, and reactivity of ruthenium carboxylato and 2-oxocarboxylato complexes bearing the bis(3,5-dimethylpyrazol-1-yl)acetato ligand

A series of ruthenium(II) acetonitrile, pyridine (py), carbonyl, SO2, and nitrosyl complexes [Ru(bdmpza)(O2CR)(L)(PPh3)] (L = NCMe, py, CO, SO2) and [Ru(bdmpza)(O2CR)(L)(PPh3)]BF4 (L = NO) containing the bis(3,5-dimethylpyrazol-1-yl)acetato (bdmpza) ligand, a N,N,O heteroscorpionate ligand, have been prepared. Starting from ruthenium chlorido, carboxylato, or 2-oxocarboxylato complexes, a variety of acetonitrile complexes [Ru(bdmpza)Cl(NCMe)(PPh3)] (4) and [Ru(bdmpza)(O2CR)(NCMe)(PPh3)] (R = Me (5a), R = Ph (5b)), as well as the pyridine complexes [Ru(bdmpza)Cl(PPh3)(py)] (6) and [Ru(bdmpza)(O2CR)(PPh3)(py)] (R = Me (7a), R = Ph (7b), R = (CO)Me (8a), R = (CO)Et (8b), R = (CO)Ph) (8c)), have been synthesized. Treatment of various carboxylato complexes [Ru(bdmpza)(O2CR)(PPh3)2] (R = Me (2a), Ph (2b)) with CO afforded carbonyl complexes [Ru(bdmpza)(O2CR)(CO)(PPh3)] (9a, 9b). In the same way, the corresponding sulfur dioxide complexes [Ru(bdmpza)(O2CMe)(PPh3)(SO2)] (10a) and [Ru(bdmpza)(O2CPh)(PPh3)(SO2)] (10b) were formed in a reaction of the carboxylato complexes with gaseous SO2. None of the 2-oxocarboxylato complexes [Ru(bdmpza)(O2C(CO)R)(PPh3)2] (R = Me (3a), Et (3b), Ph (3c)) showed any reactivity toward CO or SO2, whereas the nitrosyl complex cations [Ru(bdmpza)(O2CMe)(NO)(PPh3)](+) (11) and [Ru(bdmpza)(O2C(CO)Ph)(NO)(PPh3)](+) (12) were formed in a reaction of the acetato 2a or the benzoylformato complex 3c with an excess of nitric oxide. Similar cationic carboxylato nitrosyl complexes [Ru(bdmpza)(O2CR)(NO)(PPh3)]BF4 (R = Me (13a), R = Ph (13b)) and 2-oxocarboxylato nitrosyl complexes [Ru(bdmpza)(O2C(CO)R)(NO)(PPh3)]BF4 (R = Me (14a), R = Et (14b), R = Ph (14c)) are also accessible via a reaction with NO[BF4]. X-ray crystal structures of the chlorido acetonitrile complex [Ru(bdmpza)Cl(NCMe)(PPh3)] (4), the pyridine complexes [Ru(bdmpza)(O2CMe)(PPh3)(py)] (7a) and [Ru(bdmpza)(O2CC(O)Et)(PPh3)(py)] (8b), the carbonyl complex [Ru(bdmpza)(O2CPh)(CO)(PPh3)] (9b), the sulfur dioxide complex [Ru(bdmpza)(O2CPh)(PPh3)(SO2)] (10b), as well as the nitrosyl complex [Ru(bdmpza)(O2C(CO)Me)(NO)(PPh3)]BF4 (14a), are reported. The molecular structure of the sulfur dioxide complex [Ru(bdmpza)(O2CPh)(PPh3)(SO2)] (10b) revealed a rather unusual intramolecular SO2-O2CPh Lewis acid-base adduct.     

Syntheses and ligand interconversions of copper(II) derivatives of the metalloligand [Pt2(mu-S)2(PPh3)4

The reactivity of the metalloligand [Pt2(micro-S)2(PPh3)4] towards a variety of copper(II)-ligand systems has been studied. Reaction of [Pt2(mu-S)2(PPh3)4] with copper(II) halide complexes [CuCl2L](L = 2,2'-bipyridine and 1,10-phenanthroline) gave trinuclear dicationic products [Pt2(mu-S)2(PPh3)4CuL]2+, and the 8-hydroxyquinolinate (hq) complex [Cu(hq)2] gave [Pt2(mu-S)2(PPh3)4Cu(hq)]+, isolated as their BPh4- or PF6- salts. Related cationic complexes with other ancillary amine ligands (1,2-diaminoethane, 1,2-diaminopropane, 1,2-diaminocyclohexane) were obtained by reactions of [Pt2(mu-S)2(PPh3)4] with CuCl2 and the amine. In contrast, reaction of [Pt2(mu-S)2(PPh3)4] with CuCl2 and NH3 in methanol gave the intensely blue methoxy-bridged dicopper complex [{Pt(2)(mu-S)2(PPh3)4Cu(OMe)}2]2+, isolated as its hexafluorophosphate salt. Copper beta-diketonate complexes reacted with [Pt2(mu-S)2(PPh3)4] giving [Pt2(mu-S)2(PPh3)4Cu(beta-diketonate)]+PF6- complexes, with the CH3COCHCOCH3(acac) and CF3COCHCO(2-thienyl)(tta) derivatives characterised by X-ray structure determinations. The local Cu(II) environment ranges from distorted square-planar to an intermediate form of square-planar and tetrahedral. The beta-diketonate derivatives show varying stability towards methanolysis, giving [{Pt2(mu-S)2(PPh3)4Cu(OMe)}2]2+.     

Copper(I)/S(8) reversible reactions leading to an end-on bound dicopper(II) disulfide complex: nucleophilic reactivity and analogies to copper-dioxygen chemistry

Elemental sulfur (S8) reacts reversibly with the copper(I) complex [(TMPA')CuI](+) (1), where TMPA' is a TMPA (tris(2-pyridylmethyl)amine) analogue with a 6-CH2OCH3 substituent on one pyridyl ligand arm, affording a spectroscopically pure end-on bound disulfido-dicopper(II) complex [{(TMPA')Cu(II)}2(mu-1,2-S2(2-))](2+) (2) {nu(S-S) = 492 cm(-1); nu(Cu-S)sym = 309 cm(-1)}; by contrast, [(TMPA)Cu(I)(CH3CN)](+) (3)/S8 chemistry produces an equilibrium mixture of at least three complexes. The reaction of excess PPh3 with 2 leads to formal "release" of zerovalent sulfur and reduction of copper ion to give the corresponding complex [(TMPA')Cu(I)(PPh3)](+) (11) along with S=PPh3 as products. Dioxygen displaces the disulfur moiety from 2 to produce the end-on Cu2O2 complex, [{(TMPA')Cu(II)}2(mu-1,2-O2(2-)](2+) (9). Addition of the tetradentate ligand TMPA to 2 generates the apparently more thermodynamically stable [{(TMPA)Cu(II)}2(mu-1,2-S2(2-))](2+) (4) and expected mixture of other species. Bubbling 2 with CO leads to the formation of the carbonyl adduct [(TMPA')CuI(CO)](+) (8). Carbonylation/sulfur-release/CO-removal cycles can be repeated several times. Sulfur atom transfer from 2 also occurs in a near quantitative manner when it is treated with 2,6-dimethylphenyl isocyanide (ArNC), leading to the corresponding isothiocyanate (ArNCS) and [(TMPA')Cu(I)(CNAr)](+) (12). Complex 2 readily reacts with PhCH2Br: [{(TMPA')Cu(II)}2(mu-1,2-S(2)(2-)](2+) (2) + 2 PhCH2Br --> [{(TMPA')Cu(II)(Br)}2](2+) (6) + PhCH2SSCH2Ph. The unprecedented substrate reactivity studies reveal that end-on bound mu-1,2-disulfide-dicopper(II) complex 2 provides a nucleophilic S2(2-) moiety, in striking contrast to the electrophilic behavior of a recently described side-on bound mu-eta(2):eta(2)-disulfido-dicopper(II) complex, [{(N3)Cu(II)}(2)(mu-eta(2):eta(2)-S2(2-))](2+) (5) with tridentate N3 ligand. The investigation thus reveals striking analogies of copper/sulfur and copper/dioxygen chemistries, with regard to structure type formation and specific substrate reactivity patterns.     

H2O2-reactivity of copper(II) complexes supported by tris[(pyridin-2-yl)methyl]amine ligands with 6-phenyl substituents

The structure and H(2)O(2)-reactivity of a series of copper(II) complexes supported by tris[(pyridin-2-yl)methyl]amine (TPA) derivatives having a phenyl group at the 6-position of pyridine donor group(s) [(6-phenylpyridin-2-yl)methyl]bis[(pyridin-2-yl)methyl]amine (Ph(1)TPA), bis[(6-phenylpyridin-2-yl)methyl][(pyridin-2-yl)methyl]amine (Ph(2)TPA), and tris[(6-phenylpyridin-2-yl)methyl]amine (Ph(3)TPA) have systematically been examined to get insights into the aromatic substituent (6-Ph) effects on the coordination chemistry of TPA ligand system. The X-ray crystallographic analyses have revealed that [Cu(II)(TPA)(CH(3)CN)](ClO(4))(2) (CuTPA) and [Cu(II)(Ph(3)TPA)(CH(3)CN)](ClO(4))(2) (3) exhibit a trigonal bipyramidal structure, whereas [Cu(II)(Ph(1)TPA)(CH(3)CN)](ClO(4))(2) (1) shows a slightly distorted square pyramidal structure and [Cu(II)(Ph(2)TPA)(CH(3)CN)](ClO(4))(2) (2) has an intermediate structure between trigonal bipyramidal and square pyramidal. On the other hand, the UV-vis and ESR data have suggested that all the copper(II) complexes have a similar trigonal bipyramidal structure in solution. The redox potentials of CuTPA, 1, 2, and 3 have been determined as E(1/2) = -0.34, -0.28, -0.16, and -0.04 mV vs Ag/AgNO(3), respectively, demonstrating that introduction of each 6-Ph group causes positive shift of E(1/2) about 0.1 V. Notable difference in H(2)O(2)-reactivity has been found among the copper(II) complexes. Namely, CuTPA and 1 afforded mononuclear copper(II)-hydroperoxo complexes CuTPA-OOH and 1-OOH, respectively, whereas complex 2 provided bis(mu-oxo)dicopper(III) complex 2-oxo. On the other hand, copper(II) complex 3 was reduced to the corresponding copper(I) complex 3(red). On the basis of the H(2)O(2)-reactivity together with the X-ray structures and the redox potentials of the copper(II) complexes, the substituent effects of 6-Ph are discussed in detail.     

Structural variation in copper(I) complexes with pyridylmethylamide ligands: structural analysis with a new four-coordinate geometry index, tau4

Four Cu(I) complexes were synthesized with a family of pyridylmethylamide ligands, HL(R) [HL(R) = N-(2-pyridylmethyl)acetamide, R = null; 2,2-dimethyl-N-(2-pyridylmethyl)propionamide, R = Me(3); 2,2,2-triphenyl-N-(2-pyridylmethyl)acetamide, R = Ph(3))]. Complexes 1-3 were synthesized from the respective ligand and [Cu(CH(3)CN)(4)]PF(6) in a 2 : 1 molar ratio: [Cu(HL)(2)]PF(6) (1), [Cu(2)(HL(Me3))(4)](PF(6))(2) (2), [Cu(HL(Ph3))(2)]PF(6) (3). Complex 4, [Cu(HL)(CH(3)CN)(PPh(3))]PF(6), was synthesized from the reaction of HL with [Cu(CH(3)CN)(4)]PF(6) and PPh(3) in a 1 : 1 : 1 molar ratio. X-Ray crystal structures reveal that complexes 1, 3 and 4 are mononuclear Cu(I) species, while complex 2 is a Cu(I) dimer. The copper ions are four-coordinate with geometries ranging from distorted tetrahedral to seesaw in 1, 2, and 4. Complexes 1 and 2 are very air sensitive and they display similar electrochemical properties. The coordination geometry of complex 3 is nearly linear, two-coordinate. Complex 3 is exceptionally stable with respect to oxidation in the air, and its cyclic voltammetry shows no oxidation wave in the range of 0-1.5 V. The unusual inertness of complex 3 towards oxidation is attributed to the protection from bulky triphenyl substituent of the HL(Ph3) ligand. A new geometric parameter for four-coordinate compounds, tau(4), is proposed as an improved, simple metric for quantitatively evaluating the geometry of four-coordinate complexes and compounds.     

Modeling Tyrosinase Monooxygenase Activity. Spectroscopic and Magnetic Investigations of Products Due to Reactions between Copper(I) Complexes of Xylyl-Based Dinucleating Ligands and Dioxygen: Aromatic Ring Hydroxylation and Irreversible Oxidation Products

A full account of a chemical system possessing features that mimic the reactivity aspects of tyrosinase is presented. Using dinucleating ligands with a m-xylyl spacer three new dicopper(I) complexes have been synthesized and their reactivity with dioxygen investigated. The six-membered chelate ring forming ligands provide only two nitrogen coordinations to each copper. The complexes [Cu(I)(2)L(CH(3)CN)(2)]X(2) (X = ClO(4)(-) (1a), SbF(6)(-) (1b)) and [Cu(I)(2)(L-NO(2))(CH(3)CN)(2)][SbF(6)](2) (1c) [L = alpha,alpha'-bis[N-methyl-N-(2-pyridylethyl)amino]-m-xylene; L-NO(2) = para-nitro derivative of L] have been characterized by IR and (1)H NMR spectroscopy. The reaction of O(2) with 1a-c in CH(2)Cl(2) or THF is instantaneous and causes stoichiometric xylyl hydroxylation reactions producing phenol products. Thus 1a produces phenoxo-/hydroxo-bridged product [Cu(II)(2)(L-O)(OH)][ClO(4)](2) (2a). The existence of putative peroxo-dicopper(II) species could not be detected even at -80 degrees C. A trend is observed for the extent of aromatic ring hydroxylation (298 K): CH(3)CN approximately DMF > CH(3)OH > CH(2)Cl(2). Cyclic voltammetric experiment of 1a in DMF reveals an appreciably low redox potential (E(1/2) = -0.26 V vs SCE) for the Cu(II)(2)/Cu(I)(2) redox process. Variable-temperature (25-300 K) magnetic susceptibility measurements establish that the copper(II) centers in 2a and the dihydroxo-bridged complex [Cu(II)(2)L'(OH)(2)][ClO(4)](2) (2b) [formed due to an impurity (L') present during the synthesis of L following Method A; L' = bis[alpha,alpha'-bis(N-methyl-N-(2-pyridylethyl)amino)-m-xylene]methylamine] are antiferromagnetically coupled, with 2a considerably more coupled than 2b. Reaction of 1a with O(2) in CH(2)Cl(2) (298 K) produces an additional unhydroxylated product of composition [Cu(II)(2)L(OH)(OH(2))][ClO(4)](3).2H(2)O.0.5HCl (3a). In agreement with its proposed hydroxo-/aquo-bridged structure, 3a is weakly antiferromagnetically coupled. In CH(3)CN solution, 3a rearranges to generate a doubly hydroxo-bridged species [Cu(II)(2)L(OH)(2)](2+). Using a solution-generated dicopper(I) complex of a closely similar ligand (L' ') providing five-membered chelate ring, the reactivity toward dioxygen was also investigated. It produces only an irreversibly oxidized product of composition Cu(II)(2)L' '(OH)(ClO(4))(3)(H(2)O)(2) (3b) (L' ' = alpha,alpha'-bis[N-methyl-N-(2-pyridylmethyl)amino]-m-xylene). For 3b the copper(II) centers are almost uncoupled.