Single-drop microextraction for the determination of manganese in seafood and water samples

We describe a method for single drop microextraction of manganese from fish, mollusk, and from natural waters using the reagent 1-(2-pyridylazo)-2-naphthol as the complexing agent and chloroform as the fluid extractor. After extraction, the analyte was directly submitted to graphite furnace electrothermal atomic absorption spectrometry. Once optimized, the method has a detection limit of 30 ng L^?1, a limit of quantification of 100 ng L^?1, and an enrichment factor of 16. Its accuracy was verified by applying the procedure to the following certified reference materials: apple leaves, spinach leaves, bovine liver, and mussel tissue. The procedure was also successfully applied to the determination of manganese in seafood and natural waters.

Metallomic study on plasma samples from Nile tilapia using SR-XRF and GFAAS after separation by 2D PAGE: initial results

An investigation was made on plasma samples obtained after protein separation. The proteome of the plasma of Nile tilapia (Oreochromis niloticus) was separated by 2D PAGE, and manganese and zinc in protein spots was qualitatively and quantitatively determined by synchrotron radiation X-ray fluorescence (SR-XRF) and graphite furnace atomic absorption spectrometry (GFAAS). Manganese and zinc are present in four and six plasma protein spots, respectively. These ions are bound to proteins with molecular weights ranging from 19 to 70?kDa and with isoelectric point (pI) ranging from 4.7 to 6.3. The concentrations of manganese and zinc bound to these proteins as determined by GFAAS following acid digestion of the spots range from 0.8 to 2.6?mg of manganese, and from 1.0 to 6.3?mg of zinc, respectively, per g of protein.

A highly sensitive method for in vitro testing of fluorinated drug candidates using high-resolution continuum source molecular absorption spectrometry (HR-CS MAS)

We report here the development, optimization, and evaluation of a highly sensitive method for the determination of fluorine in biological matrices employing highresolution continuum source molecular absorption spectrometry (HR-CS MAS), suitable for pharmacological testing of fluorine-containing drug candidates. For this purpose, the most important parameters were studied in detail and subsequently optimized using a multivariate approach based on experimental design methodology. We developed a new approach employing a graphite tube lined with tantalum foil, thereby significantly enhancing sensitivity, while interferences from phosphorus monoxide (PO) molecular absorption due to the complex phosphate-rich matrix were completely eliminated. The limit of detection and the characteristic mass were 5.79 and 6.08 pg F, respectively. In order to evaluate the accuracy of the procedure, a recovery test was performed using spiked samples from three bioassays (i.e., DNA binding, protein binding, and cellular uptake) and the recovery rates ranged from 97.4 to 106.4 %. The proposed method is applicable for preclinical in vitro testing of fluorinated drug molecules and thereby establishes HR-CS atomic absorption spectrometry instrumentation as a universal tool in medicinal chemistry.

Amperometric sensor for detection of bisphenol A using a pencil graphite electrode modified with polyaniline nanorods and multiwalled carbon nanotubes

We report on a simple and highly sensitive amperometric method for the determination of bisphenol A (BPA) using pencil graphite electrodes modified with polyaniline nanorods and multiwalled carbon nanotubes. The modified electrodes display enhanced electroactivity for the oxidation of BPA compared to the unmodified pencil graphite electrode. Under optimized conditions, the sensor has a linear response to BPA in the 1.0 and 400?μM concentration range, with a limit of detection of 10?nM (at S/N?=?3). The modified electrode also has a remarkably stable response, and up to 95 injections are possible with a relative standard deviation of 4.2% at 100?μM of BPA. Recoveries range from 86 to 102% for boiling water spiked with BPA from four brands of baby bottles.

The use of gold nanoparticles as an effective modifier for the determination of arsenic and antimony by electrothermal atomic absorption spectrometry

Gold nanoparticles (AuNPs) were used as a new chemical modifier for the determination of arsenic and antimony in salt solutions by electrothermal atomic absorption spectrometry. The AuNPs were prepared by reducing chloroauric acid with sodium citrate. The effects of pyrolysis and atomization temperatures, the amounts of interferents and modifier on the sensitivities of arsenic and antimony were investigated. As and Sb remain in the graphite tube up to 1,100°C, which is sufficient for the determination of the two metals in certified reference materials and spiked sea water samples within a 95% confidence level with low RSD (<10%). The detection limits (N?=?10 at 3??) for As and Sb in sea water are 2.3???g?L^-1 and 3.0???g?L^-1, respectively. Almost no background as well as a blank value was detected for AuNPs.

Liquid-phase microextraction based on solidified floating drops of organic solvents

Microextraction of organic or inorganic analytes using solidified floating drops of organic solvents is a fairly new method that is simple and rapid, and requires only small quantities of solvents and reagents. This review (with 109 references) covers published work up to Sep. 2012, and describes how the method was combined with analytical techniques such as GC, HPLC, ICP-OES and electrothermal atomic absorption spectrometry. We discuss basic principles and the main parameters that affect the extraction efficiency, and give specific applications of the technique.

Voltammetric platform for detection of 2,4,6-trinitrotoluene based on a molecularly imprinted polymer

New methods for determination of explosive substances as, for example, 2,4,6-trinitrotoluene (TNT), in a rapid way and at low cost are highly required. An electrochemical platform has been here developed with good characteristics of low dimension, fast response, low cost, and high selectivity. It is based on a commercially available screen printed cell with graphite ink working and auxiliary electrodes and a silver ink quasi-reference electrode. The whole cell is covered with a thick layer of cation exchanging acrylic polymer molecularly imprinted with 2,4,6-trinitrotoluene. The polymeric layer acts at the same time as electrolytic medium and selective receptor. It has been demonstrated that, in this medium, 2,4,6-trinitrotoluene is electroactive at graphite electrode, being reduced by a non-reversible reaction. The peak current (differential pulse voltammogram) is proportional to TNT concentration with limit of detection for TNT around 5?×?10^?7?M and linearity range up to 2?×?10^?5?M. The selectivity for TNT relative to other reducible compounds as, for example, nitroaromatic derivatives, and to other possible interfering substances, as negatively charged ions, is good. Measurements can be performed in not de-aerated solution and in small volumes (20 μl), so that the proposed platform is very promising for in situ determinations.

Jim Morrison, Friend and Colleague

Our long-time association with Jim Morrison and the work that came from it is the result of a series of fortunate coincidences. We are pleased to be able to share recollections here of our interactions with Jim and how his life and work have influenced us and the field of mass spectrometry.

An efficient electrochemical disinfection of E. coli and S. aureus in drinking water using ferrocene–PAMAM–multiwalled carbon nanotubes–chitosan nanocomposite modified pyrolytic graphite electrode

This work reported an efficient electrochemical treatment for drinking water disinfection using a pyrolytic graphite electrode modified with ferrocenyl tethered poly(amidoamine) dendrimers–multiwalled carbon nanotubes–chitosan nanocomposite. The influence parameters of electrochemical disinfection of Escherichia coli and Staphylococcus aureus, such as applied potential and sterilization time, were investigated. Further investigation indicated that almost all (99.99 %) of the initial bacteria were killed after applying a low potential of 0.4 V for 10 min. During the electrochemical disinfection process, the oxidized form of ferrocene was formed on electrode, which played a key role in the disinfection towards E. coli and S. aureus. Hence, the proposed method may provide potential application for the disinfection of drinking water.

Determination of trace palladium in complicated matrices by displacement dispersive liquid-liquid microextraction and graphite furnace atomic absorption spectrometry

We describe a method for displacement dispersive liquid-liquid microextraction (DLLME) along with graphite furnace atomic absorption spectrometry for the determination of Pd(II) in complex environmental samples. In this method, Cu(II) is first complexed with diethyldithiocarbamate (DDTC), and the resultant Cu-DDTC complex added to a sedimented phase and submitted to DLLME. In the second step, the sedimented phase is dispersed into the sample solution containing Pd, and another DLLME procedure is carried out. The Pd ions can displace Cu ions from the pre-extracted Cu-DDTC complex because the stability of the Pd-DDTC complex is higher than that of Cu-DDTC. As a result, Pd is preconcentrated. Potential interferences by transition metal ions of lower complex stability can be largely reduced as they cannot displace Cu from the Cu-DDTC complex. The tolerance limits for such ions are better by 2 to 4 orders of magnitude compared to conventional DLLME. The typical sample volume is 5?mL, and an enhancement factor of 96 and a detection limit (3?s) of 7.6?ng?L-1 are achieved.

Ionization of pesticides using a far-ultraviolet femtosecond laser in gas chromatography/time-of-flight mass spectrometry

The fourth harmonic emission (200 nm) of a femtosecond Ti:sapphire laser (35 fs) was generated and used in the multiphoton ionization of 49 pesticides in gas chromatography/time-of-flight mass spectrometry. The limit of detection was improved when the ionization source from the third harmonic emission (267 nm) was replaced with the fourth harmonic emission for several pesticide molecules that contained no conjugated double bonds since their absorption bands are located in the far-ultraviolet region. This analytical instrument was used in the analysis of a series of real samples including potatoes, carrots, and cabbage, and a signal suspected to arise from di-allate was observed for the potato sample.

Multi-element analysis of urine by inductively coupled plasma orthogonal acceleration time-of-flight mass spectrometry

This work shows the analytical potential of inductively coupled plasma orthogonal-acceleration time-of-flight mass spectrometry (ICP-OA-TOF-MS) for rapid, simultaneous, and reliable determination of more than 50 elements at ultra-trace levels in urine. Under optimum instrumental conditions, after a 10-fold sample dilution step, and by using Rh as an internal standard, ICP-OA-TOF-MS also enables the determination of elements whose assay is more diffcult when using conventional quadrupole instruments. This is confirmed by the analysis of commercially available reference urine samples and/or by analytical recoveries study and isotope ratio based determination of accuracies. On the other side, the interference resulting from polyatomic carbon, chlorine, or various sulfur species does not allow the determination of elements such as Cr, Fe, V, Se and As without a mathematical correction.

Chitosan matrices modified with carbon nanotubes for use in mediated microbial biosensing

We describe a microbial sensor based on Pseudomonas fluorescens cells that was prepared by modifying graphite electrodes with chitosan and carbon nanotubes. Chronoamperometry was performed at +0.3 V in the presence of hexacyanoferrate as a mediator and revealed a good response to glucose which is linear in the 1.0 to 5.0 mM concentration range. Linearity was defined by the equation of y?=?102.120x?13.279 (R ²?=?0.998) (y shows current density as nA.cm^?2 and x shows glucose concentration in mM). The effect of the CNTs on the response was compared to that of electrodes made without CNTs.

A graphene-based electrochemical sensor for sensitive and selective determination of hydroquinone

Graphene was prepared by electrochemical reduction of exfoliated graphite oxide at cathodic potentials, and used to fabricate a graphene-modified glassy carbon electrode (GCE) which was applied in a sensor for highly sensitive and selective voltammetric determination of hydroquinone (HQ). Compared to a bare (conventional) GCE, the redox peak current for HQ in pH 5.7 acetate buffer solution is significantly increased, indicating that graphene possesses electrocatalytic activity towards HQ. In addition, the peak-to-peak separation is significantly improved. The modified electrode enables sensing of HQ without interference by catechol or resorcinol. Under optimal conditions, the sensor exhibits excellent performance for detecting HQ with a detection limit of 0.8?μM, a reproducibility of 2.5% (expressed as the RSD), and a recoveries from 98.4 to 101.2%.

Picoliter droplet microfluidic immunosorbent platform for point-of-care diagnostics of tetanus

We have developed a sensitive, specific, rapid and low cost picoliter microsphere-based platform for bioanalyte detection and quantification. In this method, a biological sample, biosensing microspheres, and fluorescently labeled detection (secondary) antibodies are co-encapsulated to capture the analyte (here: human anti-tetanus immunoglobulin G) on the surface of the microsphere in microfluidic pL-sized droplets. The absorption of the analyte and detecting antibodies on the microsphere concentrate the fluorescent signal in correlation with analyte concentration. Using our platform and commercially available antibodies, we were able to quantify anti-tetanus antibodies in human serum. In comparison to standard bulk immunosorbent assays, the microfluidic droplet platform presented here reduces the reagent volume by four orders of magnitude, while fast reagent mixing reduces the detection time from hours to minutes. We consider this platform to be a major leap forward in the miniaturization of immunosorbent assays and to provide a rapid and low cost tool for global point-of-care.

Analysis of human blood plasma and hen egg white by chiroptical spectroscopic methods (ECD, VCD, ROA)

Chiroptical methods are widely used in structural and conformational analyses of biopolymers. The application of these methods to investigations of biofluids would provide new avenues for the molecular diagnosis of protein-misfolding diseases. In this work, samples of human blood plasma and hen egg white were analyzed using a combination of conventional and chiroptical methods: ultraviolet absorption/electronic circular dichroism (UV/ECD), Fourier transform infrared absorption/vibrational circular dichroism (FTIR/VCD), and Raman scattering/Raman optical activity (Raman/ROA). For comparison, the main components of these substances—human serum albumin (HSA) and ovalbumin (Ova)—were also analyzed by these methods. The ultraviolet region of the ECD spectrum was analyzed using the CDNN CD software package to evaluate the secondary structures of the proteins. The UV/ECD, FTIR/VCD, and Raman/ROA spectra of the substances were quite similar to those of the corresponding major proteins, while some differences were also detected and explained. The conclusions drawn from the FTIR/VCD and Raman/ROA data were in good agreement with the secondary structures calculated from ECD. The results obtained in this work demonstrate that the chiroptical methods used here can be applied to analyze not only pure protein solutions but also more complex systems, such as biological fluids.

HRMAS NMR spectroscopy combined with chemometrics as an alternative analytical tool to control cigarette authenticity

In this paper, we present for the first time the use of high-resolution magic angle spinning nuclear magnetic resonance (HRMAS NMR) spectroscopy combined with chemometrics as an alternative tool for the characterization of tobacco products from different commercial international brands as well as for the identification of counterfeits. Although cigarette filling is a very complex chemical mixture, we were able to discriminate between dark, bright, and additive-free cigarette blends belonging to six different filter-cigarette brands, commercially available, using an approach for which no extraction procedure is required. Second, we focused our study on a specific worldwide-distributed brand for which established counterfeits were available. We discriminated those from their genuine counterparts with 100 % accuracy using unsupervised multivariate statistical analysis. The counterfeits that we analyzed showed a higher amount of nicotine and solanesol and a lower content of sugars, all endogenous tobacco leaf metabolites. This preliminary study demonstrates the great potential of HRMAS NMR spectroscopy to help in controlling cigarette authenticity.

Mediated glucose enzyme electrodes by cross-linking films of osmium redox complexes and glucose oxidase on electrodes

Here, we report on a novel, versatile approach for the preparation of mediated enzyme electrodes, demonstrated using cross-linked films of glucose oxidase and a range of functionalised osmium complexes on graphite electrodes. Response of enzyme electrodes are optimised by evaluation of glucose response as a function of variation in ratios of [Os(2,2′-bipyridine)₂(4-aminomethyl pyridine)Cl]⁺ redox mediator, polyallylamine support and glucose oxidase enzyme cross-linked using a di-epoxide reagent in films on graphite. Lowering of the redox potential required to mediate glucose oxidation is achieved by synthesis of complexes using (4,4′-dimethyl-2,2′-bipyridine) or (4,4′-dimethoxy-2,2′-bipyridine) as a ligand instead of (2,2′-bipyridine). Enzyme electrodes prepared using the complexes based on dimethoxy- or dimethyl-substituted bipyridines provide glucose oxidation current densities of 30 and 70 μA?cm^?2 at 0.2 and 0.35 V applied potential compared to 120 μA?cm^?2 at 0.45 V for the initial enzyme electrode, under pseudo-physiological conditions in 5 mM glucose, with stability of signals proving inadequate for long-term operation. Current output and stability may be improved by selection of alternate anchoring and cross-linking methodology, to provide enzyme electrodes capable for application to long-term glucose biosensors and anodes in enzymatic fuel cells.

The coupling of rapidly synergistic cloud point extraction with thermospray flame furnace atomic absorption spectrometry

Rapidly synergistic cloud point extraction (RS-CPE) was coupled with thermospray flame furnace atomic absorption spectrometry (TS-FF-AAS) to result in new CPE patterns and accelerated (1?min) protocols. It is demonstrated, for the case of copper (II) ion, that TS-FF-AAS improves the sampling efficiency and the sensitivity of FAAS determinations. Problems of nebulization associated with previous methods based on the coupling of FAAS and RS-CPE are overcome. TS-FF-AAS also improves sensitivity and gives a limit of detection for copper of 0.20?μg?L^-1, which is better by a factor of 32. Compared to direct FAAS, the factor is 114.

New strategies for the chemical characterization of multi-walled carbon nanotubes and their derivatives

Industrially relevant characterization of multi-walled carbon nanotubes (MWCNT) is still a challenging task. The aim of this work is to show novel and fast concepts for the chemical characterization of carbon nanotubes (CNT) by a combination of analytical techniques. Information obtained by individual tools like Fourier transform infrared spectroscopy (FTIR), attenuated total reflection infrared spectroscopy or Raman spectroscopy is not providing a full picture of the functionalization of MWCNTs. However, a combination of tools such as FTIR or mass spectrometry with thermogravimetric methods proved to be very useful. Sample preparation for FTIR and Raman spectroscopy is another focus of this contribution because of its strong effect on the results obtained. We also are suggesting methods for sample preparation that lead to highly reproducibility results. Measurements have been carried out on typical CNT samples such as commercially available pristine, carboxylated and amino-functionalized MWCNTs, and on polystyrenegrafted MWCNTs. The results may serve as a guidance for the qualitative and quantitative characterization of CNT.