Characterization of hexacationic imidazolium ionic liquids as effective and highly stable gas chromatography stationary phases

Polycationic ionic liquids (ILs) are an attractive class of ILs with great potential applicability as gas chromatography stationary phases. A family of hexacationic imidazolium ILs derived from the cycloalkanol family was chemically first prepared in a straightforward manner and then applied for analytical separation purposes. Four tuneable engineering vectors, namely cation ring size structure, anion nature, spatial disposition of cycloalkanol substituents and O‐substitution, were considered as experimental parameters for the design of the desired ionic liquids. A total number of five new phases based on a common benzene core respectively exhibited column efficiencies around to 2500 plates/m, broad operating temperature ranges and also, even more importantly, good thermal stabilities (bleeding temperature between 260 and 365°C), finding variations in the selectivity and analytes elution orders depending on the IL structures. Their solvation characteristics were evaluated using the Abraham solvation parameter model, establishing clear correlations between their cation structure and retention capability with respect to certain analytes. The study of relationships between the ILs structure and solvation parameters gives us an idea of the IL stationary phase to be used for specific separations.     

Characterization of phosphonium ionic liquids through a linear solvation energy relationship and their use as GLC stationary phases

In recent years, room temperature ionic liquids (RTILs) have proven to be of great interest to analytical chemists. One important development is the use of RTILs as highly thermally stable GLC stationary phases. To date, nearly all of the RTIL stationary phases have been nitrogen-based (ammonium, pyrrolidinium, imidazolium, etc.). In this work, eight new monocationic and three new dicationic phosphonium-based RTILs are used as gas–liquid chromatography (GLC) stationary phases. Inverse gas chromatography (GC) analyses are used to study the solvation properties of the phosphonium RTILs through a linear solvation energy model. This model describes the multiple solvation interactions that the phosphonium RTILs can undergo and is useful in understanding their properties. In addition, the phosphonium-based stationary phases are used to separate complex analyte mixtures by GLC. Results show that the small differences in the solvent properties of the phosphonium ILs compared with ammonium-based ILs will allow for different and unique separation selectivities. Also, the phosphonium-based stationary phases tend to be more thermally stable than nitrogen-based ILs, which is an advantage in many GC applications.     

Evaluation of new ionic liquids as high stability selective stationary phases in gas chromatography

Two ionic liquids (ILs), namely (S,S)-1-butyl-3-(2'-hydroxy-cyclohexyl)-3H-imidazol-1-ium tetrafluoroborate and (S,S)-1-butyl-3-(2'-acetyl-cyclohexyl)-3H-imidazol-1-ium tetrafluoroborate have been employed as stationary phases in capillary gas chromatography. These new phases exhibit a column efficiency of 1,600 and 2,100 plates m(-1) for IL 1 and IL 2, respectively, a wide operating temperature range and good thermal stability (bleeding temperature of 250 °C for IL 1 and 160 °C for IL 2). Inverse gas chromatography (GC) analyses were used to study the solvation properties of these ILs through a linear solvation energy model. The application of these ILs as new GC stationary phases was studied. These stationary phases exhibited unique selectivity for many organic substances, such as alkanes, ketones, esters, and aromatic compounds. The efficient separation of several mixtures containing compounds of different polarities and the good separation of fatty acid methyl esters (FAMEs) and cis/trans isomers indicate that these ILs may be applicable as a new type of GC stationary phases.     

Studies on –SO3H functionalized Brønsted acidic imidazolium ionic liquids (ILs) for one-pot,two-step synthesis of 2-styrylquinolines

Four task-specific –SO₃H functionalized imidazolium ionic liquids (ILs) were investigated for Brønsted acidities by Hammett functions. After knowing their thermal stabilities, the catalytic activity was observed for the preparation of 2-styrylquinolines by following consecutive Friedländer and Knoevenagel reactions in solvent-free thermal energy. The acidity order ([Dsim][OOCCF₃] > [Dsim][OTs] > [Dsim][OOCCl₃] > [Msim][OOCCF₃]) of three ILs was consistent with their activity order observed in the acid-catalyzed synthesis of 2-styrylquinolines under solvent-free conditions at 90° C, with the exception of [Dsim][OTs]. The best catalytic activity was shown by 25 mol% of [Dsim][OOCCF₃] IL. The less acidic IL required 50 mol% to give good yield of 2-styrylquinolines under the optimized condition.     

硅烷基咪唑双三氟甲烷磺酰亚胺离子液体气相色谱固定相的性能评价

以双三氟甲烷磺酰亚胺离子([NTf₂]^-)为阴离子,合成阳离子烷基取代不同(C1、C2和C4)的硅烷基咪唑离子液体,以其为固定相制备气相色谱填充柱。 硅烷基咪唑离子液体为强极性固定相;阳离子结构影响固定相的热稳定性、极性和分离性能。 在这些离子液体固定相中,1-丁基-3-[(3-三甲氧基硅基)-丙基]咪唑双三氟甲烷磺酰亚胺([PBIM]NTf₂)对Grob试剂分离性能较好。 利用溶剂化作用参数模型,评价[PBIM]NTf₂固定相特性,研究固定相-组分分子之间相互作用机制;同时考察[PBIM]NTf₂色谱柱对不同类型化合物的分离性能。 结果表明,[PBIM]NTf₂固定相主要作用力是氢键碱性和偶极作用,对烷烃、醇、酯和胺等不同类型的样品组分表现出良好的分离能力。     

The increase in diffraction efficiency of an azobenzene side-chain polymer using imidazolium and ammonium ionic liquids

The advancement of the information age has intensified the focus on photosensitive materials for information storage devices. To develop new photosensitive two azobenzene side-chain polymers i.e., poly(E)-3-(4-((4-nitrophenyl)diazenyl)phenoxy)propyl acrylate (polymer-1) and poly(E)-3-(4-((2-methoxy-4-nitrophenyl)diazenyl)phenoxy)propyl acrylate (polymer-2), were developed, and their diffraction efficiency was evaluated. The impact of ionic liquids (ILs) on the diffraction efficiency was evaluated by combining the polymers with imidazolium and ammonium families of ILs such as 1-butyl-3-methylimidazolium bromide [Bmim]Br, 1-ethyl-3-methyl-imidazolium-bromide [Emim]Br (imidazolium ILs), and triethylammonium methanesulfonate [TMEAS] (ammonium IL). The molecular interaction of both azobenzene side-chain polymers with the ILs was evaluated before the diffraction efficiency studies by employing UV–vis, FT-IR, and confocal Raman spectroscopies. The spectroscopic studies revealed the interaction of the polymers with the imidazolium and ammonium ILs. The mean diffraction efficiency of polymers-1 and ?2 were ～0.05 and ～0.022%, respectively. After the addition of the ILs, the diffraction efficiency increased. The highest diffraction efficiency was achieved with the polymer-2 + [Emim]Br system of 3.5% and polymer-2 + TEMS combination of 4.03%. Therefore, although the diffraction efficiency of polymer-1 was higher than that of polymer-2, after adding the ILs, the diffraction efficiency of polymer-2 surpassed that of the polymer-1 + ILs system.     

Characterization of herbal medicine with different particle sizes using pyrolysis GC/MS, SEM, and thermal techniques

Analytical techniques have been used to characterize compounds from herbal medicine, its products and extracts. The objective of this study was to characterize a variety of particle sizes of Erythrina velutina Willd powder. The samples used in the study were named MUF01 (710 μm), MUF03 (180 μm) and MUF05 (75 μm). The techniques employed were scanning electron microscopy (SEM), thermal analysis such as thermogravimetry (TG) and differential thermal analysis (DTA) together with pyrolysis coupled to gas chromatography/mass spectrometry (Pyr-GC/MS). SEM enabled us to detect the existence of divergences from the expected results from the granulometry process. Thermal analytical techniques (TG and DTA) showed the thermal decomposition profile, corresponding to physical and chemical phenomena. The chromatographic data relative to the peak area of the compounds analyzed evidenced quantitative differences in the chemical compositions of the samples MUF01, MUF03, and MUF05 at 300, 450 and 600 °C. Neophytadiene 2,6,10-trimethyl, 14 and 3-eicosyne were identified by Pyr-GC/MS at 300, 450 and 600 °C, and it classified the samples according the peak area values, which were MUF05 > MUF03 > MUF01. SEM, DTA and TG confirmed this through particle size uniformity, heat flow, and mass loss, respectively.     

Application of 1-Alkyl-3-methylimidazolium-Based Ionic Liquids as Background Electrolytes in Nonaqueous Capillary Electrophoresis for the Analysis of Coptidis Alkaloids

Interest in ionic liquids (ILs) for their potential in analytical chemistry is increasing because they are environmentally benign and are good separation solvents. The aim of the presented investigation was to verify whether ILs would be a suitable background electrolyte (BGE) in nonaqueous capillary electrophoresis (NACE) for organic cations analysis of the closely related analogues. In this study, a novel and very simple NACE method has been established for analyzing seven quaternary alkaloids in Coptis rhizome using 1-alkyl-3-methylimidazolium tetrafluoroborate-based ionic liquid as BGE. The effects of the alkyl group, imidazolium counterion (anionic part), along with the concentration of IL, are investigated and discussed. Baseline separation, high efficiencies, and symmetrical peaks of the seven alkaloids were obtained. The separation mechanism could be hydrophobic and hydrogen-bonding interactions between the alkaloids and the imidazolium cations. The optimum conditions were 70 mM 1-decyl-3-methylimidazolium tetrafluoroborate (1D-3MI-TFB) methanol solution (apparent pH 2.66) and 30 kV applied voltage. The detection was performed at 254 nm. Seven quaternary alkaloids in Coptis rhizome were separated within 14 min. The proposed NACE separation procedure is highly reproducible and can be applied in the qualitative and quantitative analysis of Coptidis alkaloids.     

A Simple Method for Determination of Homologue Imidazolium Cations in Ionic Liquids Using IC with Direct Conductivity Detection

An investigation was carried out into the fast determination of five homologue imidazolium cations in ionic liquids by ion chromatography using a cation-exchange column and direct conductivity detection. Ethylenediamine, complex organic acid (citric acid, oxalic acid and tartaric acid) and organic modifiers (acetonitrile) were used as mobile phase. The influences of the eluent types, eluent concentration, eluent pH and column temperature on separation of the cations were discussed. Simultaneous separation and determination of the five homologue imidazolium cations in ionic liquids were achieved under an optimum condition. The optimized mobile phase was consisted of 0.25 mmol L^?1 ethylenediamine + 0.5 mmol L^?1 citric acid + 3% acetonitrile (v/v) (pH 4.1), set at a flow rate of 1.0 mL min^?1. The column temperature was 40 °C and detection limits were obtained in the range of 1.1–45.6 mg L^?1. The relative standard deviations of the chromatographic peak areas for the cations were <3.0% (n = 5). This method was successfully applied to separate imidazolium cations in ionic liquids produced by organic synthesis. The recoveries of spiked components were 92.5–101.9%.     

Ultrafast solvation dynamics in room temperature ionic liquids observed by three-pulse photon echo peak shift measurements

Three-pulse photon echo peak shift (3PEPS) measurement was applied to the investigation of the primary part (<100 ps) of the solvation dynamics in a series of imidazolium ionic liquids (IL) with an organic dye, oxazine 4 (Ox4), utilized as a probe. The ultrafast solvent response in the range of ≤300 fs exhibited dependence on the square root of the anion mass, indicating its relation with the inertial motion of anion. The inertial response of ILs with chloride anion was the fastest among other ILs with heavier and larger anions. Because Ox4 is a cationic dye, it holds a stronger interaction with the anion of IL, thus the ultrafast part of the solvation is strongly affected by the inertial motion of anions. The second solvation component in the range of ≤3.5 ps had better correlation with the reduced mass and the size of both ions included, indicating the beginning of a more global solvation process.     

Reversed phase liquid chromatography of alkyl-imidazolium ionic liquids

Eleven 1-alkyl-3-methyl imidazolium ionic liquid (IL) salts were analyzed in reversed phase mode with a Kromasil C18 column. The mobile phases were water-rich acetonitrile solutions (water content > or =70%, v/v) without any added salts. It is shown that it is possible to separate different ILs sharing the same cation and differing by the anion when salt-free mobile phases are used. When a buffer, acetate or phosphate salt, or any salt, such as sodium chloride or sodium tetrafluorobarate, is added to the mobile phase, the ILs differing only by their anions cannot be separated. ILs with different alkyl chains in the imidazolium cation are separated by mobile phases with or without added salts following a hydrophobic interaction behavior: log k is proportional to nC, the carbon number of the alkyl chain. Important differences in ion/stationary phase interactions are observed depending on the ionic content of the mobile phase. With salt-free mobile phases, the IL/C18 stationary phase interactions correspond to concave isotherms associated with fronting peaks for all ILs. With mobile phase containing 0.01 M of salt, tailing IL peaks correspond to convex adsorption isotherms. Also, the IL retention factor depends on the concentration and nature of the added salt. Hexafluorophosphate chaotropic anions can adsorb on the Kromasil C18 surface dramatically increasing the imidazolium cation retention factors.     

Preparation and evaluation of a novel bonded imidazolium ionic liquid as stationary phase for gas chromatography

1‐Butyl‐3‐[(3‐trimethoxysilyl)propyl]imidazolium chloride ionic liquid was synthesized and chemically modified onto the inner wall of a fused capillary column as a stationary phase for gas chromatography. The 1‐butyl‐3‐[(3‐trimethoxysilyl)propyl]imidazolium chloride ionic liquid bonded capillary column was evaluated in detail. The results revealed that the ionic liquid bonded capillary column exhibited high column efficiency of 1.08 × 10⁴ plates/m, and good chromatographic separation selectivity (α ) for polar and non‐polar substances, and a good thermal stability between room temperature and 400°C. Moreover, the determination of thermodynamic parameters and the linear solvation energy relationship were further carried out. The results indicated that the chromatographic retention of each probe molecule on the ionic liquid bonded stationary phase was an enthalpy‐driven process, and the system constants of the linear solvation energy relationship signified that the dispersion interaction, the hydrogen bonding acidity and hydrogen bonding basicity were dominant interactions between probes and stationary phase among five interactions during the chromatographic separation. However, the contribution of each specific interaction for the stationary phase is ranked as the dispersion interaction > the hydrogen bonding basicity > the hydrogen bonding acidity.     

Solubility Measurements and Prediction of Coenzyme Q10 Solubility in Different Solvent Systems

The solubility of coenzyme Q10 in ethyl acetate, n-hexane, 1-butanol, 1-propanol, 2-propanol and ethanol in the temperature range 270.15–320.15 K, under atmospheric pressure, was measured by a gravimetric method and compared with the data predicted using the conductor like screening model for realistic solvation (COSMO-RS) method. The results show that the solubilities of coenzyme Q10 in the above solvents increase with temperature. The temperature dependences of predicted solubilities were consistent with the experimental data. The experimental data were correlated with the Apelblat equation. At the same temperature, the order of increasing solubility is ethyl acetate > n-hexane > 1-butanol > 1-propanol > 2-propanol > ethanol.     

咪唑氟硼酸类离子液体熔点与分子内相互作用能的关系

运用密度泛函理论B3LYP方法及6-311++G(d,p)基组对11种咪唑氟硼酸离子液体进行了研究.选择相应化合物的离子体系{[XIM][BF4]n}(n-1)-(n=2,3)作为研究对象,即研究体系由一个烷基咪唑阳离子XIM+和2-3个BF4-阴离子构成,对其进行结构优化.在优化得到的最低能量构型的基础上计算了分子内阳离子与阴离子间的相互作用能,同时考虑了基组重叠误差的修正.结果表明所研究离子体系的离子间相互作用能与离子液体的实验熔点之间存在明确的线性关系,并且所得到的线性方程与氨基酸阳离子型离子液体中存在的线性关系相近.我们的工作为今后借助量子化学方法设计功能化离子液体提供了一定的理论基础.     

A functionalised ionic liquid: 1-(3-chloro-2-hydroxypropyl)-3-methyl imidazolium chloride

An ionic liquid (IL) containing an appended 3-chloro-2-hydroxypropyl functionality group 1-(3-chloro-2-hydroxypropyl)-3-methyl imidazolium chloride was synthesised by the reaction of N-methyl imidazole, hydrochloric acid and epichlorohydrin. The ionic liquid showed reasonably high conductivity and heat stability up to 230°C. Its structures were characterised by FT-IR, ¹H NMR and ¹³C NMR spectra. The physical characteristics of the ionic liquid, such as conductivity and solvation abilities have been investigated. Due to its high polarity, the IL is able to dissolve many inorganic salts, and due to hydroxyl-rich microenvironment, it is able to dissolve cellulose go up to 10 (wt%). The ILs can be used for synthesising other ILs or polyelectrolyte.     

Treatment of chromium effluent by adsorption on chitosan activated with ionic liquids

This study proposes, verifies, and refines the use of biopolymers treated with two new ionic liquids (ILs) (sec-butylammonium acetate and n-octylammonium acetate), as a platform for chromium adsorption. The ILs were synthesized, characterized, and applied to chitosan treatment. Analyzing the size distribution of microparticles of chitosan and chitosan activated with ILs (sec-butylammonium acetate and n-octylammonium acetate), we observed that a little decrease in the particle size occurred with the activation of chitosan (176 ± 0.02 μm to 167 ± 0.054 and 168.5 ± 0.05 μm, respectively), as well as changes in the X-ray diffraction FTIR_ATR spectra. Further studies were performed using the best adsorbent – chitosan treated with sec-butylammonium acetate. In this case, the chromium VI concentration in the sample was reduced by more than 99% when using chitosan treated with IL sec-butylammonium acetate. The best reaction time was determined as 1 h, which allowed a chromium adsorption of 99.1% and the adsorption kinetic data were best represented by the second-order model (k₂ = 11.7258 g mg^?1 min^?1). The maximum adsorption capacity was obtained using the Langmuir isotherm model (20.833 mg g^?1 at pH 4 during 1 h, using 1.0 g of chitosan), and the adsorption efficiency was enhanced at 25 °C by the Freundlich isotherm model, in which the constants KF and n were determined as 0.875 mg L^?1 and 1.610, respectively.     

CE Profiling of Organic Acids in Distilled Alcohol Beverages Using Pattern Recognition Analysis

The objective of this work has been to assess the potential of capillary isotachophoretic organic acids profiling using multivariate statistical methods to classify brandy samples and wine distillate samples. The leading electrolyte was 10 mmol L⁻¹ hydrochloric acid including 0.1% methylhydroxylethylcellulose adjusted with β-alanine to pH 2.9. The terminating electrolyte was 5 mmol L⁻¹ acetic acid. Principal component analysis, cluster analysis, and linear discriminant analysis were used for the classification of beverages. The results show that for the 12 acids analysed, 98.57% of the total variance is extracted by the six principal components (PC). After performing backward linear discriminant analysis, a classification function was obtained containing four variables: formic (PC2-loadings: 0.989), lactic (PC1-loadings: 0.886), malic (PC1-loadings: 0.989) and oxalic (PC2-loadings: 0.777) acids, which provide 100.0% correct classification of brandies and wine distillates.

     

Determination of Imidazolium Ionic Liquid Cations by Ion-Pair Chromatography Using a Monolithic Column and Direct Conductivity Detection

Determination of four imidazolium ionic liquid cations by ion-pair chromatography was carried out using direct conductivity detection. Chromatographic separations were performed on a silica-based monolithic column with 1-heptanesulfonic acid sodium + acetonitrile + citric acid as eluent. Carbon number rule and influence of acetonitrile on the retention of imidazolium cations were discussed. Detection limits (S/N = 3) for the cations were 2.1–55.9 mg L^?1. Relative standard deviations (RSD, n = 5) for peak areas were less than 3.0%. The method has been successfully applied to the determination of two ionic liquids synthesized by organic chemistry lab.