Effects of gaseous hydrogenation on crystallization behavior of melt-spun Mg<Subscript>63</Subscript>Pr<Subscript>15</Subscript>Ni<Subscript>22</Subscript> amorphous ribbons

Effects of gaseous hydrogenation on crystallization behavior of melt-spun Mg₆₃Pr₁₅Ni₂₂ amorphous ribbons have been investigated. The crystallization peak temperature T _p1 shifted to higher temperature with increasing heating rate for the un-hydrogenated Mg₆₃Ni₂₂Pr₁₅ metallic glass, however, it is nearly unchanged for the hydrogenated sample. The present work indicates that the crystallization is a nucleation-and-growth process for the un-hydrogenated Mg₆₃Ni₂₂Pr₁₅ metallic glass. However, the crystallization of hydrogenated sample begins with nucleation and then diffusion-controlled growth takes place.     

Crystallization kinetics and thermal stability of an amorphous Fe<Subscript>77</Subscript>C<Subscript>5</Subscript>B<Subscript>4</Subscript>Al<Subscript>2</Subscript>GaP<Subscript>9</Subscript>Si<Subscript>2</Subscript> bulk metallic glass

The thermal stability, kinetics and glass forming ability of an Fe₇₇C₅B₄Al₂GaP₉Si₂ bulk amorphous alloy have been studied by differential scanning calorimetry. The activation energy, frequency factor and rate constant corresponding to the multiple crystallization steps were determined by the Kissinger method. X-ray diffraction and transmission electron microscopy studies revealed that the crystallization starts with the primary precipitation of α-Fe from the amorphous matrix. The kinetics of nucleation of the α-Fe nanoparticles was investigated by two different methods, i.e. isothermal annealing and continuous heating after partial annealing.     

Hydrogen sorption characteristics of magnesium-based composites with addition of Mg<Subscript>2</Subscript>Ni<Subscript>0.7</Subscript>Co<Subscript>0.3</Subscript> and graphite

Magnesium-based composites of 75 wt% Mg — (10, 15, 20) wt% Mg2Ni0.7Co0.3 — (15, 10, 5) wt% C mechanically activated for 30 min under argon in a planetary mill, were obtained. Their absorption-desorption characteristics were investigated under a pressure P = 1 MPa and temperatures of 623, 573, 473, 423 and 373 K. Desorption was carried out at 623 K and 573 K and a pressure of 0.15 MPa. All the three composites showed improved hydriding kinetics as compared to pure magnesium. However, the desorption temperature was somewhat higher than needed for practical application.      

Thermodynamics of Zr<Subscript>52.5</Subscript>Cu<Subscript>17.9</Subscript>Ni<Subscript>14.6</Subscript>Al<Subscript>10</Subscript>Ti<Subscript>5</Subscript> bulk metallic glass forming alloy

Recently, multicomponent glass forming alloys have been found which exhibit extraordinary glass forming ability and cooling rates of less than 100 K/s are sufficient to suppress nucleation of crystalline phases and consequently bulk metallic glass (BMG) is formed. The undercooled melts of BMG systems have high thermal stability in the undercooled region. Therefore, it is interesting to study the thermodynamics of such materials. This article investigates the thermodynamic behavior of a BMG system namely Zr_52.5Cu_17.9Ni_14.6Al₁₀Ti₅ by estimating the Gibbs free energy difference ΔG, entropy difference ΔS, enthalpy difference ΔH between the undercooled liquid and corresponding equilibrium crystalline solid phase, in the entire temperature range from T _m to T _K. Glass forming ability (GFA) of this system has been investigated through various GFA parameters indicating the degree of ease of glass formation.     

Hydrogen sorption and electrochemical properties of intermetallic compounds La<Subscript>2</Subscript>MgNi<Subscript>9</Subscript> and La<Subscript>1.9</Subscript>Mg<Subscript>1.1</Subscript>Ni<Subscript>9</Subscript>

Intermetallic compounds La_3–xMg_xNi₉ (x = 1.0, 1.1) were synthesized and their hydrogen sorption and electrochemical properties were studied. The maximum hydrogen storage capacities for La₂MgNi₉ and La_1.9Mg_1.1Ni₉ were shown to be 1.6±0.1 and 1.5±0.1 wt.%, respectively, and the unit cell volume increased by 24% and 16%, respectively, upon the hydrogenation of the alloys. The maximum specific capacity of the electrodes with the La_1.9Mg_1.1Ni₉ and La₂MgNi₉ alloys is 390 mA h g^–1 at a discharge current density of 60 mA g^–1, which is 24% higher as compared to the similar data for the LaNi₅ alloy (315 mA h g^–1). The electrodes demonstrate high specific capacity and performance at high current densities, as well as good cyclic stability.     

New metal-rich mixed chalcogenides with an intergrowth structure: Ni<Subscript>5.68</Subscript>SiSe<Subscript>2</Subscript>, Ni<Subscript>5.46</Subscript>GeSe<Subscript>2</Subscript>, and Ni<Subscript>5.42</Subscript>GeTe<Subscript>2</Subscript>

New metal-rich mixed nickel-silicon and nickel-germanium chalcogenides, Ni_5.68SiSe₂, Ni_5.46GeSe₂, and Ni_5.42GeTe₂, were synthesized by high-temperature ceramic techniques. The X-ray diffraction study of single crystals grown from a molten flux revealed that the compounds are isostructural and crystallize in the tetragonal system (space group I4/mmm, Z = 2). These compounds are the first members of the family of M_7−δEX₂-type (M = Ni or Pd; E = Sn or Sb; X is chalcogen) intergrowth structures containing “light” p elements E. Resistivity measurements on pressed textured pellets showed that both selenides are anisotropic metallic conductors in the directions parallel and perpendicular to the heterometallic bond systems. The geometric criteria of stability of the intergrowth structure type under consideration are discussed. Dedicated to Academician G. A. Abakumov on the occasion of his 70th birthday. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1632–1638, September, 2007.     

Synthesis and crystal structure of the new complex cobalt and nickel oxide Sr<Subscript>2.25</Subscript>Y<Subscript>0.75</Subscript>Co<Subscript>1.25</Subscript>Ni<Subscript>0.75</Subscript>O<Subscript>6.84</Subscript>

The complex cobalt and nickel oxide Sr_2.25Y_0.75Co_1.25Ni_0.75O_6.84 has been synthesized by the citrate method. The oxygen content of the oxide has been determined by iodometric titration. The crystal structure of the compound has been refined using X-ray powder diffraction data (a = 3.7951(2) Å, c = 19.700(1) Å, χ₂ = 1.15, R _F ² = 0.0586, R _p = 0.0365, R _wp = 0.0462). Sr_2.25Y_0.75Co_1.25Ni_0.75O_6.84 has the structure of the second member of the Ruddlesden-Popper series A _{n + 1}B_nO_{3n + 1}.     

Structure of aqueous dispersions of Mg<Subscript>3</Subscript>Si<Subscript>2</Subscript>O<Subscript>5</Subscript>(OH)<Subscript>4</Subscript> nanotubes

Behavior of hydrosilicate nanotubes of composition Mg₃Si₂O₅(OH)₄ in aqueous dispersions was studied. Experiments devoted to observation of steady-state and relaxation electro-optical effects demonstrated that, irrespective of their initial concentration in water, nanotubes form stable bulk aggregates with weak anisotropy, rather than a homogeneous system of separate suspended nanosize cylinders.     

Controlled synthesis,characterization and thermal properties of Mg<Subscript>2</Subscript>B<Subscript>2</Subscript>O<Subscript>5</Subscript>

Optimum conditions for synthesizing monoclinic and triclinic Mg₂B₂O₅ compounds by high-temperature solid-state reactions were investigated. Mixtures composed of boric acid and magnesium oxide at MgO:B₂O₃ mole ratios of 1:0.25, 1:0.5 and 1:1.5 were heated for 1 hour at temperatures between 600–1050°C and the formed phases were identified by XRD analysis. Monoclinic Mg₂B₂O₅ was formed by heating at 850°C for 4 hours together with minimum amounts of triclinic Mg₂B₂O₅, while triclinic Mg₂B₂O₅ was formed as a single phase at 1050°C for the same reaction time. The products obtained at optimum conditions were subjected to a series of tests to determine their chemical compositions, particle size distributions, surface area values, IR spectra and TG/DTA patterns.      

Study of non-isothermal crystallization of amorphous Cu<Subscript>50</Subscript>Ti<Subscript>50</Subscript> alloy

The crystallization kinetics of amorphous Cu₅₀Ti₅₀ has been studied using differential scanning calorimetry (DSC) under non-isothermal conditions. The curves at different linear heating rates (2, 4, 8 and 16 K min^–1) show sharp crystallization peaks. The crystallization peak shifts to higher temperatures with increasing heating rate. The Kissingers method of analysis of the shift in the transformation peak is applied to evaluate the activation energy (E _c). The KJMA formalism, which is basically developed for isothermal experiments, is also used to obtain E _c and the Avrami parameter (n).The DSC data have been analysed in terms of kinetic parameters, viz. activation energy (E _c), Avrami exponent (n) and frequency factor K ₀ using three different theoretical models. It is observed that the activation energy values derived from KJMA approach and modified Kissinger equation agree fairly well with each other. The activation energy values obtained from normal Kissinger method, and Gao and Wang expression underestimate the activation energy.The financial support provided by All India Council for Technical Education (AICTE), New Delhi (Govt. of India) is gratefully acknowledged.     

The crystal structure of Ho<Subscript>4</Subscript>Ni<Subscript>11</Subscript>In<Subscript>20</Subscript>

The polycrystalline Ho₄Ni₁₁In₂₀ was obtained by arc-melting of the elements. The subsequent high temperature procedure was used for single crystal growth. Crystal structure of the compound was investigated by X-ray single crystal method: U₄Ni₁₁Ga₂₀ type, C 2/m, a = 22.4528(17), b = 4.2947(3), c = 16.5587(13) Å, β = 124.591(5)°, R1 = 0.0276, wR2 = 0.0493 for 1989 independent reflections with [I>2σ(I)].The structure is composed of three-dimensional network from Ni and In atoms in which Ho atoms fill distorted pentagonal channels. Open image in new window     

Synthesis and High-Temperature Heat Capacity of Y<Subscript>2</Subscript>Ge<Subscript>2</Subscript>O<Subscript>7</Subscript>

Yttrium germanate Y₂Ge₂O₇ was prepared by solid-phase synthesis from a stoichiometric Y₂O₃–GeO₂ mixture under multistage calcination in air within a temperature range of 1273–1473 K. The molar heat capacity of polycrystalline samples was measured by differential scanning calorimetry (DSC), and the C _P = f(T) dependence was used to calculate the thermodynamic properties of yttrium digermanates, such as the enthalpy and entropy changes and the reduced Gibbs energy.     

Effect of heat treatment on structural-chemical transformations in magnesium hydrosilicate [Mg<Subscript>3</Subscript>Si<Subscript>2</Subscript>O<Subscript>5</Subscript>(OH)<Subscript>4</Subscript>] nanotubes

The structural-chemical transformations in nanotubular magnesium hydrosilicate of composition Mg₃Si₂O₅(OH)₄ (chrysotile) obtained by hydrothermal synthesis were studied in heating to 1200°C.     

Oxidation of Diethyl Sulfide in Aqueous Solutions by Peroxynitrite and the H<Subscript>2</Subscript>O<Subscript>2</Subscript>-NO<Stack><Subscript>2</Subscript><Superscript>−</Superscript></Stack> System

It was found that nitrite anions are effective activators of hydrogen peroxide in the reaction with diethyl sulfide. The observed kinetics are consistent with the proposed intermediate formation of peroxynitrous acid (ONOOH). The rate constants for the reaction of diethyl sulfide Et₂S with the acid ONOOH (k₀ = 1.8⋅10³ L/mol⋅s) and with the anion ONOO⁻ (k₋ = 6⋅10⁻² L/mol⋅s) are respectively 10⁵ and three times higher than with hydrogen peroxide. __________ Translated from Teoreticheskaya i Eksperimental'naya Khimiya, Vol. 41, No. 5, pp. 290–295, September–October, 2005.     

Kinetics of the oxidation of diethyl sulfide in the B(OH)<Subscript>3</Subscript>-H<Subscript>2</Subscript>O<Subscript>2</Subscript>/H<Subscript>2</Subscript>O system

Data obtained for the kinetics of oxidation of diethyl sulfide (Et₂S) by hydrogen peroxide in aqueous solution catalyzed by boric acid indicate that monoperoxoborates B(O₂H)(OH) ₃ ⁻ and diperoxoborates B(O₂H)₂(OH) ₂ ⁻ are the active species. The rates of the reactions of Et₂S with B(O₂H)(OH) ₃ ⁻ and B(O₂H)₂(OH) ₂ ⁻ are 2.5 and 100 times greater than with H₂O₂. __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 43, No. 1, pp. 38–42, January–February, 2007.     

Preparation and adsorption of magnetic Co<Subscript>0.5</Subscript>Ni<Subscript>0.5</Subscript>Fe<Subscript>2</Subscript>O<Subscript>4</Subscript>-chitosan nanoparticles

In this paper, magnetic chitosan microspheres were prepared by the emulsification cross-linking technique, with glutaraldehyde as the cross-linking agent, liquid paraffin as the dispersant, and the Span-80 as emulsifier. The time of cross-linking and the ratio of Co_0.5Ni_0.5Fe₂O₄/chitosan were investigated. The morphology was studied by different instruments. The adsorption performance was investigated and the effects of initial concentration of methyl orange, the time of cross-linking, and the amount of adsorbent were discussed. It is found that the product has uniform morphology when the ratio of magnetic Co_0.5Ni_0.5Fe₂O₄/chitosan is 1 : 2 and the time of cross-linking is 5 h; At room temperature, magnetic Co_0.5Ni_0.5Fe₂O₄–chitosan has a good adsorption toward methyl orange when the magnetic Co_0.5Ni_0.5Fe₂O₄/chitosan dosage is 20 mg.     

Electrochemical and magnetic characterization of LiFePO<Subscript>4</Subscript> and Li<Subscript>0.95</Subscript>Mg<Subscript>0.05</Subscript>FePO<Subscript>4</Subscript> cathode materials

A series of lithium iron phosphates was synthesized via the sol–gel route. Iron phosphides, which are electronic conductors, were formed when sintered at 850°C. Magnetic susceptibility measurements on the samples show antiferromagnetic behaviour with T _N=50±2 K for LiFePO₄ and Li_0.95Mg_0.05PO₄ sintered at temperatures below 850°C. The LiFePO₄ and Li_0.95Mg_0.05FePO4 cathodes show a stable electrochemical capacity in the range of 150–160 mA h/g on cycling. The cyclability deteriorates with increasing sample sintering temperature due to the increased crystal size and impurities.     

Enthalpy of formation of talc Mg<Subscript>3</Subscript>[Si<Subscript>4</Subscript>O<Subscript>10</Subscript>](OH)<Subscript>2</Subscript> according to dissolution calorimetry

A thermochemical study of natural talc was performed by high-temperature melt dissolution calorimetry on a Tian-Calvet calorimeter. Based on the total values of the increment in enthalpy upon heating the sample from room temperature to 973 K, and of the dissolution enthalpy at 973 K measured in this work for talc and gibbsite (along with those determined for tremolite, brucite, and their corresponding oxides), the enthalpy of formation was calculated for talc composed of elements, Mg₃[Si₄O₁₀](OH)₂, at 298.15 K: Δ_f H _el^o(298.15 K) = −5900.6 ± 4.7 kJ/mol.     

Formation of a regular cellular structure on the surface of Zr<Subscript>67</Subscript>Ni<Subscript>30</Subscript>Si<Subscript>3</Subscript> alloy at electrochemical polishing in ionic liquids

The surfaces of the alloy based on Zr₂Ni doped by silicon (3 at.%) in the amorphous and crystalline states and of the Zr and Ni foils were electrochemically modified for the first time. The modification was carried out in the ionic liquid in the galvanostatic regime. The much more uniform distribution of the nanosized fragments can be obtained and stability of their geometric shapes can be retained in the absence of intergrain boundaries and texture in the amorphous materials.