Interfacial behavior and film patterning of redox-active cationic copper(II)-containing surfactants

Herein, we describe the synthesis and characterization of a novel series of single-tail amphiphiles LPyCn (Py=pyridine, Cn=C18, C16, C14, C10) and their copper(II)-containing complexes, which are of relevance for patterned films. The N-(pyridine-2-ylmethyl)alkyl-1-amine ligands and their complexes [CuIICl2(LPyC18)] (1), [CuIICl2(LPyC16)] (2), [CuIICl2(LPyC14)] (3), [CuIIBr2(LPyC18)] (4), [CuIIBr2(LPyC16)] (5), and [CuIIBr2(LPyC10)] (6) were synthesized, isolated, and characterized by means of mass spectrometry, IR and NMR spectroscopies, and elemental analysis. Complexes 1, 2, 3, and 6 had their molecular structure solved by X-ray diffraction methods, which showed that the local geometry around the metal center is distorted square planar. With the aim of using these species as precursors for redox-responsive films, an assessment of their electrochemical properties involved cyclic voltammetry in different solvents, with different supporting electrolytes and scan rates. Density functional theory calculations of relevant species in bulk and at interfaces were used to evaluate their electronic structure and dipole moments. The morphology and order of the resulting films at the air/water interface were studied by isothermal compression and Brewster angle microscopy. Biphasic patterned Langmuir films were observed for all complexes except 3 and 6, and dependence on the chain length and the nature of the halogen coligand determine the characteristics of the isotherms and their intricate topology. Complexes 3 and 6, which have shorter chain lengths, failed to exhibit organization. These results exemplify the first comprehensive study of the behavior of single-tail metallosurfactants, which are likely to lead to high-end technological applications based on their patterned films.     

Edelfosine disturbs the sphingomyelin-cholesterol model membrane system in a cholesterol-dependent way - the Langmuir monolayer study

Synthetic alkyl-lysophospholipids, represented by edelfosine (ED), reveal strong anticancer activity and therefore are promising drugs used in anticancer therapy. Primary target for edelfosine is cellular membrane, which is in contrast to traditional cytostatics affecting DNA. The mechanism of antitumor activity of edelfosine was hypothesized to be related to its accumulation in membrane rafts. Inspired by these findings, we have performed the Langmuir monolayer studies on the influence of edelfosine on systems composed of sphingomyelin (SM) and cholesterol (Chol), being the principal components of membrane rafts. Sphingomyelin-cholesterol proportion in monolayers was varied to reflect the composition of solely membrane rafts (SM/Chol=2:1) and contain excess of cholesterol (SM/Chol=1:1 and 1:2). Into these systems, edelfosine was added in various concentrations. The analysis of surface pressure-area isotherms, complemented with films visualization with Brewster angle microscopy (BAM) allowed us to compare the effect of edelfosine on condensation and ordering of SM/Chol monolayers. The results evidenced that the influence of ED on the interactions in model membranes and its fluidizing effect is highly cholesterol-dependent. The strongest decrease of monolayer ordering was observed for model raft system, while the excess of cholesterol present in the remaining mixtures was found to weaken the fluidizing effect of the drug.     

Air–water interfacial behavior of amphiphilic peptide analogs of synthetic chloride ion transporters

A family of heptapeptide-based chloride transporters (called synthetic anion transporters, SATs) were designed to insert into phospholipid membrane bilayers and form pores. Many of these compounds have proved to be chloride selective transporters. The transporters were designed to incorporate hydrophilic heptapeptides that could serves as headgroups and hydrocarbon tails that could serve as hydrophobic membrane anchors. Insertion of the SAT molecules into a bilayer requires approach to and insertion at the aqueous-membrane surface. The studies reported here were conducted to model and understand this process by studying SAT behavior at the air–water interface. A Langmuir trough was used to obtain surface pressure–area isotherm data. These data for amphiphilic SATs were augmented by Brewster angle microscopy (BAM), molecular modeling, and calculations of the hydrophobicity parameter log P. The analyses showed that the heptapeptide (hydrophilic) module of the SAT molecule rested on the water surface while the dialkyl (hydrophobic) tails oriented themselves in the air, perpendicular to the water surface. Brewster angle microscopy visually confirmed a high order of molecular organization. Results from these studies are consistent with the previously proposed mechanism of SAT membrane insertion and pore formation.     

下缘芳香取代结构对杯[4]芳烃Langmuir膜的影响

The Langmuir monolayer properties of lower rim aromatically substituted calix[4]arenes, 5,11,17,23-tetra-tert-butyl-25,27-bis（2-naphth-1＇-ylacetylaminoethoxy）-26,28-dihydroxylcalix[4]arene （BNAEC）, 5,11,17,23-tetra-tert- butyl-25,27-bis（2-benzoylamino ethoxy）-26,28-dihydroxylcalix[4]arene （BBAEC） and 5,11,17,23-tetra-tert-butyl- 25,27-bis（2-cinnamoylaminoethoxy）-26,28-dihydroxylcalix[4]arene （BCAEC）, have been studied. Film balance measurements and Brewster angle microscopy （BAM） observation demonstrate that all the compounds can form Langmuir monolayers with different molecular limiting areas. BNAEC or BBAEC monolayer is able to form condensed domains during compression, while BCAEC monolayer can never form condensed domain. BNAEC monolayer is more readily to form condensed domain than BBAEC monolayer. Moreover, BNAEC monolayer can form the total condensed phase during compression even when T=28℃, while BBAEC monolayer can not when T 〉 10 ℃. The results imply that different lower rim aromatic substitutions affect essentially the intermolecular interaction and molecular packing in the monolayer at air/water interface.     

Clip[5]arenes: A new family of molecular clips

Here we report the design and syntheses of two new triptycene-based rigid acyclic C-shaped hosts, clip[5]arenes C[5]OH and C[5]ME, and the strong host–guest complexation between C[5]OH and an electron-poor bipyridinium salt, paraquat G. The K_a value for the host–guest complex C[5]OH???G was calculated to be (1.09?±?0.36)??×??10⁵?M^?1 in acetone by using a non-linear curve-fitting method based on the UV–vis absorption titration experiments. Furthermore, based on this new host–guest recognition motif, a novel pseudopolyrotaxane-like supramolecular structure was constructed with C[5]OH threaded on polyviologen polymer VP-10.     

Progress in characterization of Langmuir monolayers by consideration of compressibility

Over decades, information about the rheological properties of the condensed monolayer phases has been obtained by introduction of a two-dimensional compressibility which is defined on the basis of the surface pressure-molecular area (Pi-A) features of the monolayer. Since the last decade, fundamental progress was attained in the experimental determination of the main characteristics of Langmuir monolayers in microscopic and molecular scale. Already smallest changes in the molecular structure of the amphiphile can result in changes in the molecular arrangement in the monolayer and thus, in changes of the main characteristics of the monolayer such as, the surface pressure-area per molecule (Pi-A) isotherms, the shape and texture of the condensed phase domains and the two-dimensional lattice structure. As the classical equations of state allowed only characterisation of the fluid (gaseous, liquid-expanded) state, thermodynamically based equations of state, which consider also the aggregation of the monolayer material to the condensed phase, have been developed. The present review focuses particularly to amphiphilic monolayers, the Pi-A isotherms of which indicate the existence of two condensed phases. For this case, the experimental results of the differences in the structure features and phase properties are discussed. The generalisation of the equation of state for Langmuir monolayers developed for the case that one, two or more phase transitions in the monolayer take place, is in agreement with the experimental results that the two-dimensional compressibility of the condensed phases undergoes a jump at the phase transition, whereas the compressibility is proportional to the surface pressure within one of the condensed phases. An example is presented which explains the procedure of the theoretical analysis of Pi-A isotherms indicating the existence of two condensed phases. An element of the procedure is the application of the general principle that the behaviour of any thermodynamic system is determined by the stability condition. An interesting anisotropy of the compressibility is revealed by GIXD studies of the S-phase of octadecanol monolayers. However, similar studies performed close to the LS-S-phase transition would result in a thermodynamically impossible negative compressibility. Close to this phase transition, the compressibility cannot be determined from the positions of the maxima because the monolayer is in a disordered state attributed to elastic distortions by fluctuations with the structure of the new phase in the surrounding matrix without destroying the quasi-long-range positional order.     

In situ observation of protein-adsorbed stearic acid monolayer by Brewster angle microscopy and fluorescence microscopy

A fluorescence probe, fluorescein isothiocyanate (FITC), was introduced to proteins, and the morphology of protein-adsorbed stearic acid monolayer was observed by fluorescence microscopy and Brewster angle microscopy (BAM) in order to analyze images. At a low protein concentration, the surface pressure increased as shown by a sigmoidal curve. A number of stripe patterns in the BAM images increased and the shapes became clear with increasing concentration of proteins. Simultaneously, the size of circular islands also became small, and finally disappeared. These results suggest that the very large stripe patterns in the BAM image show the assembly of both proteins and stearic acid molecules, and small circular islands show only the stearic acid molecules. © 1998 John Wiley & Sons, Ltd.     

Langmuir monolayer behavior of an ion pair amphiphile with a double-tailed cationic surfactant

The spread or Langmuir monolayer behavior of an ion pair amphiphile (IPA), hexadecyltrimethylammonium-dodecylsulfate (HTMA-DS), with a double-tailed cationic surfactant, dihexadecyldimethylammonium bromide (DHDAB), at the air/water interface was analyzed with surface pressure-area isotherms, area relaxation curves, and Brewster angle microscope (BAM) images. The surface pressure-area isotherms showed that with increasing the DHDAB molar ratio, X(DHDAB), spread monolayers of HTMA-DS with DHDAB became rigid. In addition, unreasonably small limiting areas per alkyl chain of the molecules in the monolayers were found, especially at X(DHDAB)=0.5, implying the molecular loss from the monolayers at the interface. For spread HTMA-DS/DHDAB monolayers at the interface, a new IPA, DHDA-DS, was proposed to form through the displacement of HTMA(+) from HTMA-DS by DHDA(+), leaving HTMA(+) dissociated. The formation of DHDA-DS and the desorption of dissociated HTMA(+) upon the interface compression were supported by the results obtained from designed monolayer experiments with BAM observations, and were discussed by considering the hydrophilicity, packing efficiency, and headgroup charge characteristic of the species. Moreover, the area relaxation curves of spread HTMA-DS/DHDAB monolayers suggested that the formation of DHDA-DS was strongly related to the improved monolayer stability at the interface, which may have implications for the DHDAB-enhanced physical stability of catanionic vesicles composed of HTMA-DS.     

Pyrogallol[4]arenes show highly variable amphiphilic behavior at the air-water interface dependent upon side chain length and branching

The behavior of pyrogallol[4]arenes (Pgs) substituted with normal and branched alkyl side chains at the air-water interface was examined on a Langmuir trough. The amphiphilic systems studied form stable monolayers when the straight chains are as short as n-propyl. Remarkably, n-propylpyrogallol[4]arene shows a behavior at the air-water interface that is indistinguishable from that of pyrogallolarenes bearing n-hexyl, n-nonyl, and n-dodecyl side chains. There is no report of amphiphilic side-chain-length dependence or Langmuir trough behavior for families of branched alkyl chain calixarenes or resorcinarenes. In the Pg family reported here, Pgs with straight chains (except for methyl and ethyl) behave very similarly to each other and very differently from symmetrical branched chain analogues having the same total number of carbon atoms. For example, the shortest possible branched side chain of a Pg, isopropyl-Pg, forms stable monolayers by a unique molecular subduction mechanism. Isopropyl-Pg (dimethylmethyl side chain, iPrPg) and 3-pentyl-Pg (diethylmethyl side chain, 3-pentylPg) both show high levels of organization, albeit by quite different mechanisms, at the air-water interface. Both iPrPg and 3-pentylPg differ in behavior from 4-heptylPg. Brewster angle microscopy revealed differences in organization of the Pgs that supports the mechanistic suggestions offered herein.     

Langmur monolayers of cerebroside with different head groups originated from sea cucumber: Binary systems with dipalmitoylphosphatidylcholine (DPPC)

Surface properties (Langmuir monolayer) of two different cerebrosides which are extracted from the sea cucumber (Bohadschia argus) were investigated. A main difference in chemical structure of cerebroside between BAC-2a and BAC-4 is their head groups (glucose and galactose, respectively). Furthermore, miscibility and interaction between dipalmitoylphosphatidylcholine (DPPC) and cerebrosides (BAC-2a and BAC-4) in the monolayer have been systematically examined. The surface pressure (π)−area (A), the surface potential (ΔV)−A, and the dipole moment (μ)−A isotherms for monolayers of DPPC, cerebrosides, and their binary combinations have been measured using the Wilhelmy method and the ionizing electrode method. BAC-4 forms a stable liquid-expanded (LE) monolayer, whereas BAC-2a has a first-order phase transition from the LE phase to the liquid-condensed (LC) state on 0.15 M NaCl at 298.2 K. The fundamental properties for each cerebroside monolayer were elucidated in terms of the surface dipole moment based on the three-layer model [R.J. Demchak, T. Fort Jr., J. Colloid Interface Sci. 46 (1974) 191–202] for both cerebrosides and the apparent molar quantity change (Δs^γ, Δh^γ, and Δu^γ) for BAC-2a. In addition, their miscibility with DPPC was examined by the variation of the molecular areas and the surface potentials as a function of cerebroside mole fractions, the additivity rule. The miscibility was also confirmed by constructing the two-dimensional phase diagrams. The phase diagrams for the both binary systems were of negative azeotropic type. That is, the two-component DPPC/BAC-2a and DPPC/BAC-4 monolayers are miscible. Furthermore, the Joos equation for the analysis of the collapse pressure of binary monolayers allowed calculation of the interaction parameter and the interaction energy between the DPPC and cerebroside monolayers. The miscibility in the monolayer state was also confirmed by the morphological observation with Brewster angle microscopy (BAM), fluorescence microscopy (FM), and atomic force microscopy (AFM).     

Synthesis and supramolecular properties of molecular clips with anthracene sidewalls

Novel molecular clips with anthracene sidewalls (1 a-c) were synthesized; they form stable host-guest complexes with a variety of electron-deficient aromatic and quinoid molecules. According to single-crystal structure analyses of clip 1 c and 1,2,4,5-tetracyanobenzene (TCNB) complex 14@1 b, the clips' anthracene sidewalls have to be compressed substantially during the complex formation to provide attractive pi-pi interactions between the aromatic guest molecule and the two anthracene sidewalls in the complex. The compression and expansion of aromatic sidewalls are calculated by molecular mechanics to be low-energy processes, so the energy required for compression of the anthracene sidewalls during complex formation is apparently overcompensated by the gain in energy resulting from the attractive pi-pi interactions. The finding that complexes of the clips 1 a-c are more stable than those of the corresponding clips 2 a-c can be explained in terms of the larger van der Waals contact surfaces of the anthracene sidewalls in 1 a-c (relative to the naphthalene sidewalls in 2 a-c). Color changes resulting from charge-transfer (CT) bands are observed in complex formation by 1 a-c: from colorless to red or purple with TCNB (14), and from yellow to green with 2,4,7-trinitro-9-fluorenone TNF (17). Independently, the host 1 b and guest 14 fluoresce from their respective excited singlet states, whilst in the complex 14@1 b the charge-transfer state quenches the higher-energy singlet states of the two components, and as a result luminescence is only observed from this new CT state. To the best of our knowledge, complex 14@1 b is the first example of CT luminescence from a host-guest complex. The binding constant determined for the formation of the TCNB complex 14@1 b from a UV/Vis titration experiment (Ka = 12 400 m(-1)) agrees well with the value (K(a) = 12 800 m(-1)) obtained by 1H NMR titration.     

Alignment of liquid crystals using Langmuir‒Blodgett films of unsymmetrical bent-core liquid crystals

ABSTRACT

The properties of the thin films of liquid crystal (LC) molecules can be governed easily by external fields. The anisotropic structure of the LC molecules has a large impact on the electrical and optical properties of the film. The Langmuir monolayer (LM) of LC molecules at the air–water interface is known to exhibit a variety of surface phases which can be transferred onto a solid substrate using the Langmuir?Blodgett (LB) technique. Here, we have studied the LM and LB films of asymmetrically substituted bent-core LC molecules. The morphology of LB film of the molecules is found to be a controlling parameter for aligning bulk LC in the nematic phase. It was found that the LB films of the bent-core molecules possessing defects favour the planar orientation of nematic LC, whereas the LB films with fewer defects show homeotropic alignment. The defect in LB films may introduce splay or bend distortions in the nematic near the alignment layer which can govern the planar alignment of the bulk LC. The uniform layer of LB film facilitates the molecules of nematic to anchor vertically due to a strong van der Waals interaction between the aliphatic chains leading to a homeotropic alignment.     

“Lotus” Domain Formation by the Hydrolysis Reaction of Phospholipase D to Phospholipid Monolayer

Hydrolysis rection of L-α-dipalmitoylphosphatidylcholine(L-DPPC)monolayer with phospholipase D (PLD) has been investigated by Brewster angle microscopy (BAM) combined with the film balance.It has been found that the L-DPPC domains were changed into the “lotus“ structure by PLD.It suggests that the hydrolysis reaction is incomplete and the products together with the nonreacted materials undergo a molecular rearrangement at the interface.     

Langmuir monolayers from perfluorobutyl-n-eicosane

Perfluorobutyl-n-eicosane (abbreviated as F4H20) was spread at the air/water as Langmuir monolayers and studied under different experimental conditions, such as spreading volume, subphase temperature and compression speed. The Langmuir monolayer experiments (π-A isotherms) have been complemented with Brewster angle microscopy results, which enabled direct visualization of the monolayers’ structure and estimation of the film thickness at different stages of compression. It has been found that the molecules are oriented almost vertically (with respect to the interface) in the vicinity of film collapse. The negative sign of the measured surface potential, ΔV, is evidence for the orientation of F4H20 molecules with their perfluorinated parts exposed towards the air. In the case of F4H20 a limited fluorination relative to perfluoroeicosane also results in monolayer formation, in contrast to eicosane itself, which forms lenses.     

Inherently chiral molecular clips: synthesis, chiroptical properties, and application to chiral discrimination

Inherently chiral molecular clips (MCs), pseudoenantiomeric anti-1 and anti-2, as well as mesoid syn-3, were synthesized by diastereodifferentiating repetitive Diels-Alder reactions of the achiral bisdienophile 6 with chiral diene 5 generated in situ from (-)-menthyl 3,4-bis(dibromomethyl)benzoate 4. These MCs were successfully separated by chiral HPLC to give optically active anti-1 and anti-2 and almost optically inactive syn-3. The structures of anti-1, anti-2, and syn-3 were assigned by high-resolution NMR and the absolute configurations of anti-1 and anti-2 were determined by the exciton-chirality method. Optically active anti-2 can serve as a chiral host. It binds the HCl adduct of D-tryptophan methyl ester (D-TrpOMeHCl) 3.5 times stronger than the L-enantiomer (KD/KL=3.5).     

Statistical thermodynamics approach for estimation of the interaction parameters in the mixed Langmuir films at the water/air interface

The treatment of two-dimensional system of three components of molecules of different molecular sizes, adapted from statistical thermodynamics, is used to derive parameters which could be derive parameters which could be related to the interaction between molecules in the mixed Langmuir films formed at the water/air interface.     

Langmuir膜分子动力学模拟中的头基效应

运用分子动力学方法研究了Ｌａｎｇｍｕｉｒ膜的结构和相变特性，比较了不同的头基模型对模拟的影响。发现在压膜过程中，膜分子的结构和排列存在相变，其中，分子脂肪链的倾角随着膜内每分子所占面积的增大而增大，分子链内无序的主要原因是脂肪链两端二面角的扭曲造成的。由不同模型模拟得出，带电模型的分子分布比较紊乱，倾角较小。这说明亚相环境和头基的不同，会影响模拟得的膜分子的排列，选择合理的头基模型非常重要。     

Synthesis of novel, boron-containing cavitands derived from calix[4]resorcinarenes and their molecular recognition of biologically important polyols in Langmuir films

An efficient synthetic route for the synthesis of cavitands derived from calix[4]resorcinarene and its tetrabromo derivative was elaborated. A large-scale preparation was achieved in excellent yield, by replacing the high-boiling solvents with acetone. The tetrabromocavitands were transformed into tetra-boronic acid cavitands via lithiation with butyllithium and reaction with triethylborate. Two lipophilic cavitands bearing four boronic acid residues were demonstrated to form stable Langmuir monolayers at the water-air interface. These cavitand receptors differ in bridging unit between oxygen atoms, i.e. one contains a one-carbon unit and the other a two-carbon unit. l-sorbose, d-galactose, d-glucose, and d-cellobiose were selected for molecular recognition studies using the Langmuir techniques. The unsubstituted tetra-n-undecyl calix[4]resorcinarene was used as a reference receptor compound. Differences in surface potential were diagnostic of the different types of binding forces, which can occur.