对2个涉及炭与浓硝酸反应问题的探讨

从实验与理论的角度, 对涉及炭与浓硝酸反应的2个问题进行探讨, 结果表明: (1)常温下氯离子对炭与浓硝酸的反应未见明显加速作用, 但自身会被浓硝酸氧化;(2)炭与浓硝酸反应的主要氧化产物是CO2, CO虽有生成但含量较低。     

铜与浓、稀硝酸反应的改进实验

使用大试管、胶头滴管、Y形导管等改进了铜与浓、稀硝酸的反应实验,在完全密闭条件下进行,操作简单,现象明显,尾气处理方便安全,零污染。     

铅与硝酸反应及影响因素

铅与硝酸的反应比较复杂,在无机化学教材和相关资料中对铅与硝酸反应的阐述不一致,这将不利于学生在无机化学学习中对铅的基本性质的掌握。针对无机化学教材中存在的问题,本文通过大量实验探究了铅与硝酸反应的条件以及硝酸浓度、反应温度、反应时间等对铅与硝酸反应的影响,并考查了硝酸铅在不同浓度硝酸中溶解度的变化,利用红外光谱(IR)和X射线粉末衍射(XRD)对铅与浓硝酸的反应产物进行了表征,明确了铅易溶于稀硝酸而在浓硝酸中溶解度小的实质。     

Functionalization of Carbon Nanotubes with Well‐Defined Functional Polymers via Thiol‐Coupling Reaction

Summary: Thiol‐reactive‐functionality decorated multi‐walled carbon nanotubes (MWNTs) have been obtained. Trithiocarbonate‐ended poly(N‐(2‐hydroxypropyl)methacrylamide) (PHPMA) is prepared by reversible addition‐fragmentation chain transfer (RAFT) polymerization of N‐(2‐hydroxypropyl)methacrylamide (HPMA) using S‐1‐dodecyl‐S′‐(α,α′‐dimethyl‐α″‐acetic acid)trithiocarbonate as chain transfer agent, subsequently, thiol‐terminated PHPMA (PHPMA‐SH) is obtained by treating trithiocarbonate‐ended PHPMA with hexylamine. The PHPMA‐S‐S‐MWNT conjugate is formed by simply stirring the mixture of thiol‐reactive‐functionality decorated MWNTs with PHPMA‐SH in phosphate buffered saline by a thiol‐coupling reaction. FT‐IR, HRTEM, ¹H NMR, and TGA results show that this thiol‐coupling reaction is effective to produce aqueous soluble polymer–MWNT conjugates under mild conditions.

Thiol‐reactive‐functionality decorated multi‐walled carbon nanotubes are modified with thiol end‐capped polymers by a thiol‐coupling reaction.     

固载Ru基催化剂上二氧化碳加氢合成甲酸Ⅱ反应条件对催化剂性能的影响

The synthesis of formic acid from carbon dioxide and hydrogen using a silica immobilized ruthenium catalyst as precursor has been studied in different reaction conditions. The results revealed that the TOF （turn over frequency） of HCOOH achieved 1481.5 h^-1 on immobilized ruthenium catalyst near the critical pressure point of CO2 with H2 pressure of 4.0 MPa, reaction temperature of 80℃ and PPh3/Ru molar ratio of 6：1. The reaction activity of immobilized catalyst was higher than that of homogeneous catalyst, and the immobilized catalyst also offered the practical advantages such as easy separation and reuse.     

柠檬酸配合法制备CuMnCeOx催化剂及常温催化氧化性能研究

摘要：常温催化氧化是消除室内HCHO污染最可行的方法之一,其中以过渡金属氧化物为代表的催化剂因性能优异、成本低廉而备受广泛关注。采用柠檬酸络合法和水热法制备了一系列CuMnCeOx催化剂,研究考察制备方法及载体对催化剂氧化性能的影响,并利用XRD、SEM、BET、H2-TPR、XPS和IR等对催化剂进行微观表征与分析。研究发现,制备方法及载体类型对催化剂的表面结构形貌、氧化性能产生显著影响,其中采用柠檬酸络合法所制的CuMnCeOx-C催化剂性能最佳,48h的HCHO去除率达98.6%,完全满足GB50325-2001标准要求,其介孔结构,晶体粒径及所形成的铈基铜锰固溶体均利于形成大量氧空位及催化氧化反应,且展示出良好的抗水蒸气和稳定性能,其在常温催化氧化VOCs方面具有重要应用前景。     

一氧化氮在水杨醛谷氨酸合镍修饰碳黑微电极上的电催化氧化

制备了水杨醛谷氨酸合镍修饰碳黑微电极,试验了修饰电极对一氧化氮的电催化氧化性能。试验结果表明,在pH 6.8的磷酸盐中,一氧化氮在该电极上的线性范围为4.0×10-8~1.0×10-5mol.L-1;检出限(3σ)为1.0×10-8mol.L-1。将此电极用于3种模拟样品的分析,并在此基础作回收率试验,测得RSD(n=8)值在1.9%~2.8%之间,回收率在97%~105%之间。在一氧化氮浓度1.0×10-6mol.L-1的水平上进行精密度试验,测得RSD(n=10)为2.2%。     

Dehydrogenation of Formic Acid at Room Temperature: Boosting Palladium Nanoparticle Efficiency by Coupling with Pyridinic‐Nitrogen‐Doped Carbon

The use of formic acid (FA) to produce molecular H₂ is a promising means of efficient energy storage in a fuel‐cell‐based hydrogen economy. To date, there has been a lack of heterogeneous catalyst systems that are sufficiently active, selective, and stable for clean H₂ production by FA decomposition at room temperature. For the first time, we report that flexible pyridinic‐N‐doped carbon hybrids as support materials can significantly boost the efficiency of palladium nanoparticle for H₂ generation; this is due to prominent surface electronic modulation. Under mild conditions, the optimized engineered Pd/CN_0.25 catalyst exhibited high performance in both FA dehydrogenation (achieving almost full conversion, and a turnover frequency of 5530 h^?1 at 25 °C) and the reversible process of CO₂ hydrogenation into FA. This system can lead to a full carbon‐neutral energy cycle.     

Direct Oxidation of Ascorbic Acid at an Edge Plane Pyrolytic Graphite Electrode: A Comparison of the Electroanalytical Response with Other Carbon Electrodes

The direct electrochemical oxidation of ascorbic acid at an edge plane pyrolytic graphite electrode (EPPG) is investigated and compared with other common carbon‐based electrodes, specifically glassy carbon, boron doped diamond and basal plane pyrolytic graphite. It is found that the EPPG electrode shows a significantly higher degree of electrochemical reversibility than the other electrode substrates giving rise to an analytically optimized limit of detection and sensitivity of 7.1×10^?5 M and 0.065 A M^?1 respectively.     

Mechanistic Insights into an Unexpected Carbon Dioxide Insertion Reaction through the Crystal Structures of Carbamic Diphenylthiophosphinic Anhydride and l‐[(4‐Nitrophenyl)‐sulfonyl]‐trans‐2,5‐pyrrolidinedicarboxylic Acid Methyl Ester

The crystal structures of an unexpected carbon dioxide inserted carbamidiphenylthiophosphinic anhydride and l‐[(4‐nitrophenyl) sulfonyl]‐trans‐2, 5‐pyrrolidinedicarboxylic acid methyl ester were determined by X‐ray analysis. They crystallized in the space group P2₁(#4) with a =0.9550(2), b = 0.9401(4), c= 1.2880(2) nm, β= 107.74°, V= 1.1013 (5) nm³, D_caled= 1.349 g/cm³, Z = 2 and P2₁2₁2₁(# 19) with a = 1.4666(2), b = 0.7195(2), c = 1.6339(2) nm, V = 1.7240(7) nm³, D_caled = 1.434 g/cm³, Z = 4, respectively. Through the investigation of these two crystal structures, the mechanistic insights into this unexpected carbon dioxide insertion in the reaction of trans‐2,5‐disubstituted pyrrolidine with diphenylthiophosphoryl chloride in the presence of potassium carbonate were disclosed.