Performance Optimizations with Single-, Bi-, Tri-, and Quadru-Objective for Irreversible Diesel Cycle

Applying finite time thermodynamics theory and the non-dominated sorting genetic algorithm-II (NSGA-II), thermodynamic analysis and multi-objective optimization of an irreversible Diesel cycle are performed. Through numerical calculations, the impact of the cycle temperature ratio on the power density of the cycle is analyzed. The characteristic relationships among the cycle power density versus the compression ratio and thermal efficiency are obtained with three different loss issues. The thermal efficiency, the maximum specific volume (the size of the total volume of the cylinder), and the maximum pressure ratio are compared under the maximum power output and the maximum power density criteria. Using NSGA-II, single-, bi-, tri-, and quadru-objective optimizations are performed for an irreversible Diesel cycle by introducing dimensionless power output, thermal efficiency, dimensionless ecological function, and dimensionless power density as objectives, respectively. The optimal design plan is obtained by using three solution methods, that is, the linear programming technique for multidimensional analysis of preference (LINMAP), the technique for order preferences by similarity to ideal solution (TOPSIS), and Shannon entropy, to compare the results under different objective function combinations. The comparison results indicate that the deviation index of multi-objective optimization is small. When taking the dimensionless power output, dimensionless ecological function, and dimensionless power density as the objective function to perform tri-objective optimization, the LINMAP solution is used to obtain the minimum deviation index. The deviation index at this time is 0.1333, and the design scheme is closer to the ideal scheme.     

Four-Objective Optimization for an Irreversible Porous Medium Cycle with Linear Variation in Working Fluid’s Specific Heat

Considering that the specific heat of the working fluid varies linearly with its temperature, this paper applies finite time thermodynamic theory and NSGA-II to conduct thermodynamic analysis and multi-objective optimization for irreversible porous medium cycle. The effects of working fluid’s variable-specific heat characteristics, heat transfer, friction and internal irreversibility losses on cycle power density and ecological function characteristics are analyzed. The relationship between power density and ecological function versus compression ratio or thermal efficiency are obtained. When operating in the circumstances of maximum power density, the thermal efficiency of the porous medium cycle engine is higher and its size is less than when operating in the circumstances of maximum power output, and it is also more efficient when operating in the circumstances of maximum ecological function. The four objectives of dimensionless power density, dimensionless power output, thermal efficiency and dimensionless ecological function are optimized simultaneously, and the Pareto front with a set of solutions is obtained. The best results are obtained in two-objective optimization, targeting power output and thermal efficiency, which indicates that the optimal results of the multi-objective are better than that of one-objective.     

Performance Analysis and Four-Objective Optimization of an Irreversible Rectangular Cycle

Based on the established model of the irreversible rectangular cycle in the previous literature, in this paper, finite time thermodynamics theory is applied to analyze the performance characteristics of an irreversible rectangular cycle by firstly taking power density and effective power as the objective functions. Then, four performance indicators of the cycle, that is, the thermal efficiency, dimensionless power output, dimensionless effective power, and dimensionless power density, are optimized with the cycle expansion ratio as the optimization variable by applying the nondominated sorting genetic algorithm II (NSGA-II) and considering four-objective, three-objective, and two-objective optimization combinations. Finally, optimal results are selected through three decision-making methods. The results show that although the efficiency of the irreversible rectangular cycle under the maximum power density point is less than that at the maximum power output point, the cycle under the maximum power density point can acquire a smaller size parameter. The efficiency at the maximum effective power point is always larger than that at the maximum power output point. When multi-objective optimization is performed on dimensionless power output, dimensionless effective power, and dimensionless power density, the deviation index obtained from the technique for order preference by similarity to an ideal solution (TOPSIS) decision-making method is the smallest value, which means the result is the best.     

变温热源布雷顿循环的功率密度优化

计入工质与高、低温侧换热器的热阻损失及压气机和涡轮机中的不可逆压缩和膨胀损失,用有限时间热力学方法,导出了恒温热源条件下不可逆布雷顿循环功率密度与压比间的解析式,借助于数值计算,研究了高、低温侧换热器的热导率分配和工质与热源间的热容率匹配对最大功率密度的影响。     

Performance Analysis and Optimization for Irreversible Combined Carnot Heat Engine Working with Ideal Quantum Gases

An irreversible combined Carnot cycle model using ideal quantum gases as a working medium was studied by using finite-time thermodynamics. The combined cycle consisted of two Carnot sub-cycles in a cascade mode. Considering thermal resistance, internal irreversibility, and heat leakage losses, the power output and thermal efficiency of the irreversible combined Carnot cycle were derived by utilizing the quantum gas state equation. The temperature effect of the working medium on power output and thermal efficiency is analyzed by numerical method, the optimal relationship between power output and thermal efficiency is solved by the Euler-Lagrange equation, and the effects of different working mediums on the optimal power and thermal efficiency performance are also focused. The results show that there is a set of working medium temperatures that makes the power output of the combined cycle be maximum. When there is no heat leakage loss in the combined cycle, all the characteristic curves of optimal power versus thermal efficiency are parabolic-like ones, and the internal irreversibility makes both power output and efficiency decrease. When there is heat leakage loss in the combined cycle, all the characteristic curves of optimal power versus thermal efficiency are loop-shaped ones, and the heat leakage loss only affects the thermal efficiency of the combined Carnot cycle. Comparing the power output of combined heat engines with four types of working mediums, the two-stage combined Carnot cycle using ideal Fermi-Bose gas as working medium obtains the highest power output.     

Exergetic efficiency optimization for an irreversible heat pump working on reversed Brayton cycle

This paper deals with the performance analysis and optimization for irreversible heat pumps working on reversed Brayton cycle with constant-temperature heat reservoirs by taking exergetic efficiency as the optimization objective combining exergy concept with finite-time thermodynamics (FTT). Exergetic efficiency is defined as the ratio of rate of exergy output to rate of exergy input of the system. The irreversibilities considered in the system include heat resistance losses in the hot- and cold-side heat exchangers and non-isentropic losses in the compression and expansion processes. The analytical formulas of the heating load, coefficient of performance (COP) and exergetic efficiency for the heat pumps are derived. The results are compared with those obtained for the traditional heating load and coefficient of performance objectives. The influences of the pressure ratio of the compressor, the allocation of heat exchanger inventory, the temperature ratio of two reservoirs, the effectiveness of the hot- and cold-side heat exchangers and regenerator, the efficiencies of the compressor and expander, the ratio of hot-side heat reservoir temperature to ambient temperature, the total heat exchanger inventory, and the heat capacity rate of the working fluid on the exergetic efficiency of the heat pumps are analysed by numerical calculations. The results show that the exergetic efficiency optimization is an important and effective criterion for the evaluation of an irreversible heat pump working on reversed Brayton cycle.     

Optimization Modeling of Irreversible Carnot Engine from the Perspective of Combining Finite Speed and Finite Time Analysis

An irreversible Carnot cycle engine operating as a closed system is modeled using the Direct Method and the First Law of Thermodynamics for processes with Finite Speed. Several models considering the effect on the engine performance of external and internal irreversibilities expressed as a function of the piston speed are presented. External irreversibilities are due to heat transfer at temperature gradient between the cycle and heat reservoirs, while internal ones are represented by pressure losses due to the finite speed of the piston and friction. Moreover, a method for optimizing the temperature of the cycle fluid with respect to the temperature of source and sink and the piston speed is provided. The optimization results predict distinct maximums for the thermal efficiency and power output, as well as different behavior of the entropy generation per cycle and per time. The results obtained in this optimization, which is based on piston speed, and the Curzon–Ahlborn optimization, which is based on time duration, are compared and are found to differ significantly. Correction have been proposed in order to include internal irreversibility in the externally irreversible Carnot cycle from Curzon–Ahlborn optimization, which would be equivalent to a unification attempt of the two optimization analyses.     

工质变比热对不可逆Otto循环性能的影响

用有限时间热力学的方法分析空气标准Otto循环,由数值计算给出了存在不可逆损失和工质变比热时循环功率与压缩比、效率与压缩比以及功率和效率的特性关系,分析了工质变比热对不可逆Otto循环性能的影响特点,通过分析可知工质变比热特性对不可逆Otto循环性能有较大影响,在实际循环分析中应该予以考虑,本文所得结果对实际内燃机的设计有一定的指导意义。     

两级中冷回热再热布雷顿热电联产装置的性能

应用有限时间热力学理论和方法建立了恒温热源不可逆两级中冷回热再热布雷顿热电联产装置模型,基于分析的观点,导出了装置无量纲输出率和效率的解析式。在给定总压比的情形下,通过数值计算分别研究了输出率和效率与两个中冷压比和两个再热压比的关系,当总压比变化时,发现输出率和效率对总压比存在最大值,并分别求出了两个相应的最佳的中冷压比和再热压比。分析了回热度、中冷度、再热度、压气机和涡轮机效率、压降损失等特征参数对装置性能的影响。最后发现分别存在最佳的用户侧温度使输出率和效率取得双重最大值。     

Optimal Heat Exchanger Area Distribution and Low-Temperature Heat Sink Temperature for Power Optimization of an Endoreversible Space Carnot Cycle

Using finite-time thermodynamics, a model of an endoreversible Carnot cycle for a space power plant is established in this paper. The expressions of the cycle power output and thermal efficiency are derived. Using numerical calculations and taking the cycle power output as the optimization objective, the surface area distributions of three heat exchangers are optimized, and the maximum power output is obtained when the total heat transfer area of the three heat exchangers of the whole plant is fixed. Furthermore, the double-maximum power output is obtained by optimizing the temperature of a low-temperature heat sink. Finally, the influences of fixed plant parameters on the maximum power output performance are analyzed. The results show that there is an optimal temperature of the low-temperature heat sink and a couple of optimal area distributions that allow one to obtain the double-maximum power output. The results obtained have some guidelines for the design and optimization of actual space power plants.     

冷热联供的空气制冷不可逆循环分析

本文分析了压气机排气余热利用的冷热联供回热空气制冷不可逆循环,并建立了仅忽略系统内所有换热器流动阻力损失的循环工作性能系数(COP)计算方程式。用该方程分析研究了透平膨胀机与压气机等熵效率、压缩机排气余热度、降温比、传热温差、压比等参数对系统COP值的影响,发现膨胀透平等熵效率提高对COP值的贡献远大于压气机效率同样提高的功效;在其它参数确定时,存在最佳压比,可使系统工作性能系数在该条件下达极值。在优化参数配置下,用于空气调节的冷热联供回热空气制冷不可逆循环的COP值可达2左右。     

摩擦对空气标准Diesel循环功率效率特性的影响

1前言自Novikov（1957），Chambadait1957）和Curzon－Ahlborn（1975）将传热过程引入卡诺热机循环研究，开创有限时间热力学理论后，截止96年9月已有八百余篇有关文献发表，包括专著七部，有关进展见综述文献＞3I。对mesel循环的有限时间热力学分析也已取得了一些进展。Hoffman等N用最优控制理论优化Diesel循环的活塞运动规律，AIZ。nblld等和本文作者将活塞式加热气缸中活塞最优运动规律用到了内燃机循环分析中；Orlov等导出了内燃机的功率效率极限，Klein，Blank等和本文作者问考虑了传热对Diesel循环特性的影响。除了热漏（传热）…     

Modeling and Performance Optimization of an Irreversible Two-Stage Combined Thermal Brownian Heat Engine

Based on finite time thermodynamics, an irreversible combined thermal Brownian heat engine model is established in this paper. The model consists of two thermal Brownian heat engines which are operating in tandem with thermal contact with three heat reservoirs. The rates of heat transfer are finite between the heat engine and the reservoir. Considering the heat leakage and the losses caused by kinetic energy change of particles, the formulas of steady current, power output and efficiency are derived. The power output and efficiency of combined heat engine are smaller than that of single heat engine operating between reservoirs with same temperatures. When the potential filed is free from external load, the effects of asymmetry of the potential, barrier height and heat leakage on the performance of the combined heat engine are analyzed. When the potential field is free from external load, the effects of basic design parameters on the performance of the combined heat engine are analyzed. The optimal power and efficiency are obtained by optimizing the barrier heights of two heat engines. The optimal working regions are obtained. There is optimal temperature ratio which maximize the overall power output or efficiency. When the potential filed is subjected to external load, effect of external load is analyzed. The steady current decreases versus external load; the power output and efficiency are monotonically increasing versus external load.     

Ecological optimization for an irreversible magnetic Ericsson refrigeration cycle

An irreversible Ericsson refrigeration cycle model is established, in which multi-irreversibilities such as finite-rate heat transfer, regenerative loss, heat leakage, and the efficiency of the regenerator are taken into account. Expressions for several important performance parameters, such as the cooling rate, coefficient of performance （COP）, power input, exergy output rate, entropy generation rate, and ecological function are derived. The influences of the heat leakage and the time of the regenerative processes on the ecological performance of the refrigerator are analyzed. The optimal regions of the ecological function, cooling rate, and COP are determined and evaluated. Furthermore, some important parameter relations of the refrigerator are revealed and discussed in detail. The results obtained here have general significance and will be helpful in gaining a deep understanding of the magnetic Ericsson refrigeration cycle.     

热光伏能量转换器件的热力学极限与优化性能预测

受不可逆损失的影响,热光伏能量转换器件在高品位热能回收与利用方面受到限制.本文揭示不可逆损失来源,提供热光伏能量转换器件性能提升方案.利用半导体物理和普朗克热辐射理论,确定热光伏能量转换器件在理想条件下的最大效率.进而考虑Auger与Shockley-Reed-Hall非辐射复合和不可逆传热损失对光伏电池的电学、光学和热学特性的影响,预测热光伏器件优化性能.确定功率密度、效率和光子截止能量的优化区间.结果表明:相比于理想热光伏器件,非理想热光伏器件的开路电压、短路电流密度和效率有所降低;优化热光伏电池电压、光子截止能量和热源温度,可提升器件的功率密度和效率.通过对比发现理论与实验结果较一致,所得结果可为实际热光伏能量转换器件的研制提供理论指导.     

Ecological optimization of an irreversible harmonic oscillators Carnot heat engine

A model of an irreversible quantum Carnot heat engine with heat resistance, internal irreversibility and heat leakage and many non-interacting harmonic oscillators is established in this paper. Based on the quantum master equation and semi-group approach, equations of some important performance parameters, such as power output, efficiency, exergy loss rate and ecological function for the irreversible quantum Carnot heat engine are derived. The optimal ecological performance of the heat engine in the classical limit is analyzed with numerical examples. Effects of internal irreversibility and heat leakage on the ecological performance are discussed. A performance comparison of the quantum heat engine under maximum ecological function and maximum power conditions is also performed.     

工质变比热条件下内燃机循环普适特性

用有限时间热力学的方法分析空气标准不可逆内燃机循环,导出了考虑工质变比热情况下,存在摩擦及传热损失时,由两个加热过程、两个放热过程和两个绝热过程组成的普适的空气标准不可逆内燃机循环的功率与压缩比、效率与压缩比以及功率和效率的最佳特性关系,同时由数值计算分析了工质变比热和循环过程对循环性能的影响特点,比较了工质恒、变比热时循环性能差异。所得结果包含了不可逆往复式Diesel、Otto、Brayton、Atkinson、Dual和Miller 循环的性能特性。     

第二代AFBC—CC热力性能初探

第二代ＡＦＢＣ—ＣＣ热力性能初探张娜，蔡睿贤，林汝谋（中国科学院工程热物理研究所）关键词常压流化床，燃煤联合循环，效率，功比符号表Ｄ总压恢复系数Ｔｅ余热锅炉排烟温度Ｂ燃烧室Ｇ流量△增量Ｃ压气机Ｈ焓η效率ｃｃ联合循环Ｈｕ煤气热值π压比ｄ燃气透平出口Ｎ功...     

以广义Redlich-Kwong气体为工质的不可逆回热式斯特林热机循环输出功率和效率

研究了热阻、回热损失和热漏等多种不可逆因素对以广义Redlich-Kwong气体为工质的斯特林热机性能的影响,给出了斯特林热机输出功率和效率的具体表达式并分析非理想回热特性及循环主要性能参数(如循环体积比及工质高低温比等)对循环输出功率和效率的影响.同时指出,只有在理想回热及无热漏的情况下,气体斯特林热机的效率才能达到卡诺效率.     

Refuse-fired,pressurized, fluidized-bed combustion combined cycle analysis

Use of pressurized, fluidized-bed combustion (PFBC) has given a new opportunity to use municipal refuse as fuel for combined gas and steam power cycles keeping the pollutants of sulphur and nitrogen oxides to a minimum at reduced capital cost.In combined gas and steam power cycles, the heat energy in the exhaust gases of a simple gas turbine cycle is used to generate steam in a waste-heat boiler and the generated steam is used in the steam turbine for power generation.The effects of gas turbine pressure ratio and inlet temperature on the main parameters of refuse-fired, pressurized, fluidized-bed combustion combined cycles are determined.The results indicate a maximum combined cycle thermal efficiency and work output at a possible range of optimum pressure ratios between 10 and 12 for a range of gas turbine inlet temperatures of 750–1000°C.