Thermal degradation and evolved gas analysis of epoxy (DGEBA)/novolac resin blends (ENB) during pyrolysis and combustion

The thermal degradation of epoxy (DGEBA) and phenol formaldehyde (novolac) resins blend was investigated by using thermogravimetric analysis (TGA) coupled with Fourier transform infrared spectroscopy and mass spectroscopy. The results of TGA revealed that the thermal degradation process can be subdivided into four stages: drying the sample, fast and second thermal decomposition, and further cracking process of the polymer. The total mass loss of 89.32 mass% at 950 °C is found during pyrolysis, while the polymer during the combustion almost finished at this temperature. The emissions of carbon dioxide, aliphatic hydrocarbons, carbon monoxide, etc., while aromatic products, are emitted at higher temperature during combustion and pyrolysis. It was observed that the intensities of CO₂, CO, H₂O, etc., were very high when compared with their intensities during pyrolysis, attributed to the oxidation of decomposition product.     

Thermal degradation and evolved gas analysis: A polymeric blend of urea formaldehyde (UF) and epoxy (DGEBA) resin

A polymeric blend has been prepared using urea formaldehyde (UF) and epoxy (DGEBA) resin in 1:1 mass ratio. The thermal degradation of UF/epoxy resin blend (UFE) was investigated by using thermogravimetric analyses (TGA), coupled with FTIR and MS. The results of TGA revealed that the pyrolysis process can be divided into three stages: drying process, fast thermal decomposition and cracking of the sample. There were no solid products except ash content for UFE during combustion at high temperature. The total mass loss during pyrolysis at 775 °C is found to be 97.32%, while 54.14% of the original mass was lost in the second stage between 225 °C and 400 °C. It is observed that the activation energy of the second stage degradation during combustion (6.23 × 10⁻⁴ J mol⁻¹) is more than that of pyrolysis (5.89 × 10⁻⁴ J mol⁻¹). The emissions of CO₂, CO, H₂O, HCN, HNCO, and NH₃ are identified during thermal degradation of UFE.     

Thermal degradation and evolved gas analysis of N,N′-bis(2 hydroxyethyl) linseed amide (BHLA) during pyrolysis and combustion

The thermal degradation of N,N′-bis(2 hydroxyethyl) linseed amide (BHLA) was investigated by thermogravimetric analysis coupled with Fourier transform infrared spectroscopy and mass spectroscopy (TG–FTIR–MS). Thermogravimetric analysis revealed that the thermal degradation process can be subdivided into three stages: sample drying (<200 °C), main decomposition (200–500 °C), and further cracking (>500 °C) of the polymer. The compound reached almost 800 °C during pyrolysis and combustion. The activation energy at the second step during combustion was slightly higher than that of pyrolysis emissions of carbon dioxide, aliphatic hydrocarbons, carbon monoxide, and hydrogen cyanide, and other gases during combustion and pyrolysis were detected by FTIR and MS spectra. It was observed that the intensities of CO₂, CO, HCN, and H₂O were very high when compared with their intensities during pyrolysis, and this was attributed to the oxidation of the decomposition product.     

Synthesis of HCN Polymer from Thermal Decomposition of Formamide

Prolonged heating of formamide (HCONH₂) at 185°C or 220°C produces a black insoluble product. The FT-IR spectroscopy and the X-ray photoelectron spectroscopy (XPS) suggest that the product has the chemical structure of a polymer of hydrocyanic acid: (HCN)_x. The pyrolysis of (HCN)_x prepared from formamide produces a large amount of gaseous HCN in a wide range of temperatures together with ammonia (NH₃) and isocyanic acid (H─N─C═O).

During the thermal decomposition of formamide to produce (HCN)_x, the volatile products evolved were monitored with gas phase infrared spectroscopy. At 185°C, the gaseous product released were CO₂, CO and NH₃ while at 220°C, also HCN was detected. In both cases, a white sublimate was collected in the upper part of the reaction vessel. It consists of ammonium carbamate and its hydrolysis products ammonium carbonate and hydrogen carbonate. It is therefore possible to synthesize the polymer of hydrocyanic acid (HCN)_x starting from formamide avoiding to handle the dangerous hydrocyanic acid.     

Experimental characterization of gaseous species emitted by the fast pyrolysis of biomass and polyethylene

This study aims to experimentally characterize the carbonaceous and nitrogenous species, from the flash pyrolysis of millet stalks and polyethylene plastic bags, using the device of the tubular kiln, coupled to two gas analyzers: Analyzer Fourier Transform Infrared (FTIR) and an analyzer Infrared Non-Dispersive (IRND). Gaseous products analyzed are: CH₄, C₂H₂, C₂H₄, C₃H₈, C₆H₆, CO, CO₂, NO₂, NO, N₂O, HCN and NH₃. Whatever the temperature of thermal degradation, the pyrolysis shows us that in terms of mass:

• •For the millet stalks, the gaseous compounds are formed mainly CO and CO₂ to the carbonaceous species, HCN and NH₃, for the nitrogenous species analyzed;
• •As regards the polyethylene bags, hydrocarbons for carbonaceous species and HCN, NH₃ and NO₂ for the nitrogenous species, are most abundant.

In addition, the results suppose that in our experimental conditions, the hydrocarbon which is involved primarily in the formation of CO is ethylene C₂H₄. At the end of this characterization, we determined the rate of carbon and nitrogen found in the volatile gas. With millet stalks we have about 45% of volatile carbon and 15% of the nitrogen of fuel that are found in gaseous products. The results obtained with the plastic bags give 68% carbon and 15% nitrogen found in the nitrogenous species analyzed.     

Effects of melamine phosphate on the thermal decomposition and combustion behavior of reconstituted tobacco sheet

In this paper, first the MP-modified reconstituted tobacco sheet (RTS) was prepared by a paper-making process. Thermogravimetric analysis coupled to Fourier transform infrared spectrometer (TG-FTIR) had been used to investigate the influences of melamine phosphate (MP) on the thermal decomposition and the formation of evolved volatile products of RTS. TG-FTIR results illustrated that the incorporation of MP into RTS could retard the thermal decomposition of the major components of RTS and meanwhile lead to the formation of more thermally stable char. Moreover, the main gases released during the pyrolysis of RTS and MP-modified RTS were H₂O, CO₂, CO, NH₃, carbonyl compounds, alcohols, phenols, alkanes, and alkenes. The presence of MP changed the formation of evolved volatile products of RTS obviously. The effects of MP on the combustion behavior of RTS were studied by micro-scale combustion calorimetry and cone calorimetry. Results demonstrated that the formation of combustible gases was mainly determined by the thermal decomposition stage occurred in the temperature range of 150–600 °C. The incorporation of MP into RTS influenced the release of fuel gases and the char formation in the process of the thermal decomposition of RTS, and eventually retarded the flammability and combustibility of RTS.     

Study on the thermal degradation of high performance fibers by TG/FTIR and Py-GC/MS

The thermal degradation behaviors of Kevlar 49, Kevlar 129 (Poly(p-phenylene terephthamide), Nomex (polyisophthaloyl metaphenylene diamine), and PBO(poly(p-phenylene benzobisoxazole)) fibers were measured by TG/FTIR and Py-GC/MS. The characteristic temperatures of the fibers in air were obtained by TG. It indicated that the initial degradation temperature of the PBO is the highest. The initial degradation temperature of Nomex fiber is the lowest, but the end decomposition temperature of Nomex is the highest. The gases released by the pyrolysis in air were mainly CO₂, CO, H₂O, NO, and HCN, also containing a small amount of NH₃, and the absorption peaks of CO₂ were the strongest. The results of Py-GC/MS showed that CO₂ and benzene were the most pyrolysis fragment. With the change of pyrolysis temperature, the chromatogram and mass spectra results take a large variety. The pyrolysates can help us to study the pyrolysis process of high performance fibers.     

利用温度跃升傅立叶变换红外原位分析技术对斯蒂酚酸碳酰肼和斯蒂酚酸氨基脲快速热解反应的研究

Flash pyrolysis of （CHZ）2TNR and （SCZ）2TNR was conducted by T-jump/FTIR spectroscopy under 0.1 MPa Ar atmosphere. The results show that eleven IR-active gas products obtained during flash pyrolysis process of the two title compounds are NO, CO, HCN, NH3, NO2, N2O, HNCO, HNO2, CO2, H2O and HCHO, of which NO and CO are the main gas products. The molar fraction of the individual product in the pyrolysis gas mixture was described as a function of time. At least some of the NO2, N2O and H2O can result from the oxidization reaction of NH3 during flash pyrolysis of （CHZ）2TNR. It can be concluded that the two compounds are not worthy of further in-depth consideration of the adoption in detonators as eco-friendly primary explosive, and should not be used as gas generation composition of automobile crash airbag system taking into account the toxicity.     

Fabrication and thermal decomposition of glycidyl azide polymer modified nitrocellulose double base propellants

Glycidyl azide polymer(GAP) with the advantages of non-volatility and excellent thermal stability is a candidate as a replacement for nitroglycerine(NG) in a double base propellant. The GAP-NC double base propellants were formulated with GAP and nitrocellulose(NC) fibers. Tensile test and SEM characterization indicated that GAP-NC propellants had a homogeneous structure. Thermogravimetric analysis of GAP-NC propellants revealed that the onset decomposition temperature reached a high level ranging from 192.9 to 194.6 °C, which indicated that the substitution of NG with GAP contributed to the safe storage and process operations for double base propellant. The result analysis of decomposition products of GAP-NC propellants showed that the main gas decomposition products of the propellants were NO, NO_2, CO, CO_2, NH_3, CH_4, HCN, N_2, CH_2O and C_2H_4O. The thermal decomposition process of the specimens was proposed.     

Comparative evolved gas analyses on thermal degradation of thiourea by coupled TG-FTIR and TG/DTA-MS instruments

Identification and monitoring of gaseous species released during thermal decomposition of pure thiourea, (NH₂)₂C=S in argon, helium and air atmosphere have been carried out by both online coupled TG-FTIR and simultaneous TG/DTA-MS apparatuses manufactured by TA Instruments (USA). In both inert atmospheres and air between 182 and 240°C the main gaseous products of thiourea are ammonia (NH₃) and carbon disulfide (CS₂), whilst in flowing air sulphur dioxide (SO₂) and carbonyl sulphide (COS) as gas phase oxidation products of CS₂, and in addition hydrogen cyanide (HCN) also occur, which are detected by both FTIR spectroscopic and mass spectrometric EGA methods. Some evolution of isothiocyanic acid (HNCS) and cyanamide (NH₂CN) vapours have also observed mainly by EGA-FTIR, and largely depending on the experimental conditions. HNCS is hardly identified by mass spectrometry. Any evolution of H₂S has not been detected at any stage of thiourea degradation by either of the two methods. The exothermic heat effect of gas phase oxidation process of CS₂ partially compensates the endothermicity of the corresponding degradation step producing CS₂.     

Emission of Toxic HCN During NOx Removal by Ammonia SCR in the Exhaust of Lean‐Burn Natural Gas Engines

Reducing greenhouse gas and pollutant emissions is one of the most stringent priorities of our society to minimize their dramatic effects on health and environment. Natural gas (NG) engines, in particular at lean conditions, emit less CO₂ in comparison to combustion engines operated with liquid fuels but NG engines still require emission control devices for NO_x removal. Using state‐of‐the‐art technologies for selective catalytic reduction (SCR) of NO_x with NH₃, we evaluated the interplay of the reducing agent NH₃ and formaldehyde, which is always present in the exhaust of NG engines. Our results show that a significant amount of highly toxic hydrogen cyanide (HCN) is formed. All catalysts tested partially convert formaldehyde to HCOOH and CO. Additionally, they form secondary emissions of HCN due to catalytic reactions of formaldehyde and its oxidation intermediates with NH₃. With the present components of the exhaust gas aftertreatment system the HCN emissions are not efficiently converted to non‐polluting gases. The development of more advanced catalyst formulations with improved oxidation activity is mandatory to solve this novel critical issue.     

Monitoring of N-doped organic xerogels pyrolysis by TG–MS

Pyrolysis of N-doped organic xerogels prepared from different N-containing precursors has been studied by TG–MS. The pyrolytic process has been ascertained to consist of three steps. The first step (up to cca. 250 °C) has been interpreted as water loss (humidity, fixed water from pores) and in some cases as formaldehyde loss. The second step has been connected with volatile substances evolution (cca. 250–450 °C) with predominant release of NH₃, CO₂ and products of melamine (M) or urea decomposition. Reaction/pore water and formaldehyde have also been detected in this step. The third step of pyrolysis (450–1,000 °C) has been ascribed to carbonization reaction when the other releases of NH₃, CO₂, reaction/pore water and M decomposition products have continued. This was accompanied with evolution of H₂ and 3-hydroxypyridine. On the basis of TG measurements, it was found that increasing time of condensation of organic xerogels and amount of used catalyst lead to higher yield of carbonaceous products. In addition, adsorption experiments of Pb(II) on N-doped carbon xerogels proved that relationship between adsorption properties of xerogels and nitrogen loss during pyrolysis exists. When the sample contains only amino groups, they are lost during pyrolysis as ammonia and the adsorption ability is low, while nitrogen comprised in the aromatic rings of N-precursors stays in the structure and causes enlarging of adsorption capacity.     

TG–MS analysis of thermal behavior and gaseous emissions during co-combustion of straw with municipal sewage sludge

The thermal behavior and gas product distribution during combustion of straw (wheat straw, corn stalks, and cotton stalks), municipal sewage sludge (MSS), and their blends were investigated by thermogravimetry–mass spectroscopy. The experiments were conducted with various blending ratios and temperatures ranging from 323 to 1,173 K. Addition of MSS decreased the combustion performance of the straw. The reactions between wheat straw and corn stalks with MSS proceeded more easily than that of cotton stalks. Significant interactions were observed between the straw and MSS at the char combustion stage. Gaseous species (CO₂, SO₂, NH₃, HCN, and NO) were mainly produced at temperatures of 523–873 K at which most of the mass loss occurred. Higher MSS proportions in the blends resulted in lower emissions peaks for CO₂, NH₃, HCN, and NO except for SO₂. To ensure combustion performance and mitigate problematic gaseous emissions, the proportion of MSS added to the blends should be <30 mass%.     

The pyrolysis of cigarette paper under the conditions that simulate cigarette smouldering and puffing

The combustion properties and pyrolysis behavior of cigarette paper under the pyrolysis conditions of cigarette smouldering were investigated by micro-scale combustion calorimetry (MCC), thermogravimetric analysis coupled to Fourier transform infrared spectrometer (TG-FTIR), respectively. MCC results demonstrated that the combustion and pyrolysis behavior are influenced by heating rate obviously. TG-FTIR results illustrated that the composition of the gaseous products were mainly composed of CO₂, H₂O carbonyl compounds, CO, and methanol. Flash pyrolysis experiment in combination with high performance liquid chromatography (FPy-HPLC) was used to study the pyrolytic formation of eight carbonyl compounds (i.e., formaldehyde, acetaldehyde, acetone, acrolein, propionaldehyde, crotonaldehyde, methyl ethyl ketone, and butyraldehyde) during the pyrolysis of cigarette paper under the pyrolysis conditions of cigarette puffing. Moreover, the solid char formed after the flash pyrolysis experiments were studied by X-ray photoelectron spectroscopy (XPS). It had been found that the pyrolysis temperature influenced the formation of carbonyl compounds and the composition of char greatly.     

用T-jump/FTIR研究MnCP、NiCP和PbCP的快速热分解(英)

0IntroductionCarbohydrazideisahydrazinederivativewithwhitecrystalofstrongreducingbehaviors.Becauseithasmanycoordinationatoms(fournitrogenatomsandoneoxygenatom),carbohydrazidecan,therefore,beusedasmultidentateligand.Itscoordinationcom鄄poundiswidelyusedint…     

Thermal characteristics of novel NaH2PO4/NaHSO4 flame retardant system for polyurethane foams

The thermal decomposition of iminodiacetic, oxydiacetic, and thiodiacetic acids in helium atmosphere has been studied by means of thermogravimetry (TG), differential thermal analysis (DTA) and temperature-programmed pyrolysis directly coupled with mass spectrometry (TPPy-MS). Evolved gas analysis (EGA) profiles of iminodiacetic and oxydiacetic acids were obtained and compared with TG and DTA profiles. The decomposition of iminodiacetic acid forms water, CO, CO₂, CH₃CN, HCN and some hydrocarbons. After water evolution a cyclic anhydride is formed, as well as for oxydiacetic acid. Thiodiacetic acid vaporizes without decomposition.     

Pyrolysis behavior of pectin under the conditions that simulate cigarette smoking

In this paper, the formation mechanism of pyrolysis gases released during the pyrolysis of pectin under the conditions that simulate cigarette smouldering was investigated by thermogravimetric analysis coupled to Fourier transform infrared spectrometer (TG-FTIR). Moreover, the combustion behavior of pyrolysis gases was studied by micro-scale combustion calorimetry (MCC). TG-FTIR results illustrated that the composition of the gaseous products was mainly composed of CO₂, H₂O, CO, methanol, methane and carbonyl compounds. MCC results demonstrated that the combustion of pectin was mainly determined by the prolysis gases formed in the temperature range of 200-300 °C. Flash pyrolysis experiment in combination with high performance liquid chromatography (FPy-HPLC) was used to study the pyrolytic formation of eight carbonyl compounds (i.e. formaldehyde, acetaldehyde, acetone, acrolein, propionaldehyde, crotonaldehyde, methyl ethyl ketone and butyraldehyde) during the pyrolysis of pectin under the pyrolysis conditions of cigarette puffing. Results demonstrated that pyrolysis temperature influenced the formation of acetaldehyde, acrolein, propionaldehyde and butyraldehyde greatly, while nitrogen flow affected the generation of formaldehyde, acetone, crotonaldehyde and methyl ethyl ketone deeply.     

TG-FTIR, Py-two-dimensional GC–MS with heart-cutting and LC–MS/MS to reveal hydrocyanic acid formation mechanisms during glycine pyrolysis

To elucidate the formation process of HCN from the pyrolysis of glycine, the small molecule gaseous pyrolysates, H₂O, NH₃, CO₂, CO, HNCO, and HCN, were analyzed in real-time by TG-FTIR. The appearance of the volatile pyrolysis products and the solid residue was determined in real-time at their corresponding formation temperatures by online Py-two-dimensional GC–MS with heart-cutting and LC–MS/MS. The pyrolysis of 2,5-diketopiperazine, a thermolytic by-product of glycine pyrolysis, was also studied. The results showed that: (1) the pyrolysis of glycine can be divided into three temperature ranges 200–300, 300–440, and 440–900 °C; HCN forms in each range with three peaks appearing at 273, 422, and 763 °C, respectively. (2) The mechanistic pathways of HCN formation from glycine in the low- and high-temperature heating stages are different. Below 273 °C, glycine undergoes a decarboxylation reaction to produce methylamine, which subsequently forms HCN by means of dehydrogenation. Above 300 °C, glycine gives relatively large amounts of HCN via 2,5-diketopiperazine and subsequent HNCO or methylenimine formation.     

STUDY ON THE GASEOUS PRODUCTS OF HIGH TEMPERATURE PYROLYSIS OF ACRYLONITRILE POLYMERS BY ON-LINE FTIR METHOD

The gaseous products of high temperature pyrolysis (300℃ to 960℃) of aerylonitrile polymers were measured continuously under nitrogen atmosphere by on-line Fourier Transform Infrared Spectroscopic method (FTIR). From the variations of characteristic peaks it was found that the nitrogen of macromolecules evolved were mainly in the form of hydrogen cyanide and ammonia. During the pyrolysis amorphous carbonaceous element was formed, and crosslinked to form network structure. Three kinds of samples were used for comparison. The experimental results show that the gaseous products of volatile small molecules were HCN, NH_3, CH_4, C_2H_6 and cyanide. CO and CO_2 were also formed when copolymers of PAN were thermally pyrolyzed.     

Thermal,spectroscopic and XRD studies on nitroaminoguanidine (NAG)

Nitroaminoguanidine (NAG) has been investigated as regards its thermal decomposition characteristics using simultaneous thermal analysis, infrared spectroscopy, X-ray diffraction and polarising microscopy. XRD studies show thatNAG crystal belongs to the tetragonal system. The crystal structure parameters are found to be:a=17.063±0.005Å,b=17.063±0.005Å,c=5.155±0.005Å andc/a axial ratio=0.302. Under non-isothermal conditions,NAG decomposed apparently in one stage with a loss in weight of 80%. But the thermal decomposition ofNAG in the solid phase under isothermal conditions proceeded through three stages. Both the first and the second stages obeyed theA-E (Avrami Erofee'v) equation forn=1. The 3rd stage is too slow and kinetics has not been attempted. The rate parameters for the first and second stages have been evaluated. Gaseous decomposition products detected using the IR gas cell are NH₃, NO₂, HCN, N₂O, CO and CO₂. High temperature IR studies indicate preferential deamination reaction initially indicating breaking of N?NH₂ and C?NH₂ bonds leading to NH₂ radical formation. Addition of diphenylamine, a known chain inhibitor, decelerated the thermal decomposition, supporting a radical chain reaction.