A thermodynamic study of complexation of 18-crown-6 with Zn2+, Tl+, Hg2+ and {\text{UO}}^{{{\text{2 + }}}}_{{\text{2}}} cations in acetonitrile-dimethylformamide binary media and study the effect of anion on the stability constant of (18C6-Na+) complex in methanol solutions

The equilibrium constants and thermodynamic parameters for complex formation of 18-crown-6(18C6) with Zn²⁺, Tl⁺, Hg²⁺ and $ {\text{UO}}^{{{\text{2 + }}}}_{{\text{2}}} $ cations have been determined by conductivity measurements in acetonitrile(AN)-dimethylformamide(DMF) binary solutions. 18-crown-6 forms 1:1 complexes [M:L] with Zn²⁺, Hg²⁺ and $ {\text{UO}}^{{{\text{2 + }}}}_{{\text{2}}} $ cations, but in the case of Tl⁺ cation, a 1:2 [M:L₂] complex is formed in most binary solutions. The thermodynamic parameters ( $ \Delta {\text{H}}^{ \circ }_{{\text{c}}} $ and $ \Delta {\text{S}}^{ \circ }_{{\text{c}}} $ ) which were obtained from temperature dependence of the equilibrium constants show that in most cases, the complexes are enthalpy destabilized but entropy stabilized and a non-monotonic behaviour is observed for variations of standard enthalpy and entropy changes versus the composition of AN/DMF binary mixed solvents. The obtained results show that the order of selectivity of 18C6 ligand for these cations changes with the composition of the mixed solvent. A non-linear relationship was observed between the stability constants (logK_f) of these complexes with the composition of AN/DMF binary solutions. The influence of the $ {\text{ClO}}^{ - }_{{\text{4}}} $ , $ {\text{NO}}^{ - }_{{\text{3}}} $ and $ {\text{Cl}}^{ - } $ anions on the stability constant of (18C6-Na⁺) complex in methanol (MeOH) solutions was also studied by potentiometry method. The results show that the stability of (18C6-Na⁺) complex in the presence of the anions increases in order: $ {\text{ClO}}^{ - }_{{\text{4}}} $  >  $ {\text{NO}}^{ - }_{{\text{3}}} $  >  $ {\text{Cl}}^{ - } $ .     

Synthesis of lanthanide(III) complexes appended with a diphenylphosphinamide and their interaction with human serum albumin

Two DOTA-based proligands bearing a pendant diphenylphosphinamide 4a and 4b were synthesised. Their Eu(III) complexes exhibit sensitised emission when excited at 270 nm via the diphenylphosphinamide chromophore. Hydration states of q = 1.5 were determined from excited state lifetime measurements (Eu.4a $ k_{{{\text{H}}_{ 2} {\text{O}}}} = 2. 1 4 \,{\text{ms}}^{ - 1} ,\;k_{{{\text{D}}_{ 2} {\text{O}}}} = 0. 6 4 \,{\text{ms}}^{ - 1} $ ; Eu.4b $ k_{{{\text{H}}_{ 2} {\text{O}}}} = 2. 6 7\, {\text{ms}}^{ - 1} ,\;k_{{{\text{D}}_{ 2} {\text{O}}}} = 1. 1 8 \,{\text{ms}}^{ - 1} $ ). In the presence of human serum albumin (HSA) (0.1 mM Eu.4a/b, 0.67 mM HSA, pH 7.4) q = 0.4 for Eu.4a ( $ k_{{{\text{H}}_{ 2} {\text{O}}}} = 1. 3 4\, {\text{ms}}^{ - 1} ,\;k_{{{\text{D}}_{ 2} {\text{O}}}} = 0. 7 5\, {\text{ms}}^{ - 1} $ ) and q = 0.6 for Eu.4b ( $ k_{{{\text{H}}_{ 2} {\text{O}}}} = 1. 8 3\, {\text{ms}}^{ - 1} ,\;k_{{{\text{D}}_{ 2} {\text{O}}}} = 1.0 5 \,{\text{ms}}^{ - 1} $ ). Relaxivites (pH 7.4, 298 K, 20 MHz) of the Gd(III) complexes in the absence and presence of HSA (0.1 mM Gd.4a/b, 0.67 mM HSA) were: Gd.4a (r ₁ = 7.6 mM^?1s^?1 and r ₁ = 11.7 mM^?1s^?1) and Gd.4b. (r ₁ = 7.3 mM^?1s^?1 and r ₁ = 16.0 mM^?1s^?1). These relatively modest increases in r ₁ are consistent with the change in inner-sphere hydration on binding to HSA shown by luminescence measurements on Eu.4a/b. Binding constants for HSA determined by the quenching of luminescence (Eu) and enhancement of relaxivity (Gd) were Eu.4a (27,000 M^?1 ± 12%), Eu.4b (32,000 M^?1 ± 14%), Gd.4a (21,000 M^?1 ± 15%) and Gd.4b (26,000 M^?1 ± 15%).     

Thermodynamic behavior of complexation process between benzo-15-crown-5 with Li+, Na+, K+, and NH4 + cations in acetonitrile–methanol binary media

The stability constants of 1:1 (M:L) complexes of benzo-15-crown-5 (B15C5) with Li⁺, Na⁺, K⁺ and NH₄ ⁺ cations, the Gibbs standard free energies ( $ \Updelta {\text{G}}_{\text{c}}^{ \circ } $ ), the standard enthalpy changes ( $ \Updelta {\text{H}}_{\text{c}}^{ \circ } $ ) and standard entropy changes ( $ \Updelta {\text{S}}_{\text{c}}^{ \circ } $ ) for formation of these complexes in acetonitrile–methanol (AN–MeOH) binary mixtures have been determined conductometrically. The conductance data show that the stoichiometry of the complexes formed between the macrocyclic ligand and the studied cations is 1:1 (M:L). In most cases, addition of B15C5 to solutions of these cations, causes a continuous increase in the molar conductivities which indicates that the mobility of complexed cations is more than the uncomplexed ones. The stability constants of the complexes were obtained from fitting of molar conductivity curves using a computer program, GENPLOT. The results show that the selectivity order of B15C5 for the metal cations changes with the nature and composition of the binary mixed solvent. The values of standard enthalpy changes ( $ \Updelta {\text{H}}_{\text{c}}^{ \circ } $ ) for complexation reactions were obtained from the slope of the van’t Hoff plots and the changes in standard entropy ( $ \Updelta {\text{S}}_{\text{c}}^{ \circ } $ ) were calculated from the relationship $ \Updelta {\text{G}}_{{{\text{c}},298.15}}^{ \circ } = \Updelta {\text{H}}_{\text{c}}^{ \circ } - 298.15\Updelta {\text{S}}_{\text{c}}^{ \circ } $ . A non-linear behavior was observed between the stability constants (log K_f) of the complexes and the composition of the acetonitrile–methanol (AN–MeOH) binary solution. The results obtained in this study, show that in most cases, the complexes formed between B15C5 and Li⁺, Na⁺, K⁺ and NH₄ ⁺ cations are both enthalpy and entropy stabilized and the values of these thermodynamic quantities change with the composition of the binary solution.     

Thermodynamic studies on Pr2TeO6

The standard Gibbs energy of formation of Pr₂TeO₆ $ (\Updelta_{\text{f}} G^{^\circ } \left( {{ \Pr }_{ 2} {\text{TeO}}_{ 6} ,\;{\text{s}}} \right)) $ was derived from its vapour pressure in the temperature range of 1,400–1,480 K. The vapour pressure of TeO₂ (g) was measured by employing a thermogravimetry-based transpiration method. The temperature dependence of the vapour pressure of TeO₂ over the mixture Pr₂TeO₆ (s) + Pr₂O₃ (s) generated by the incongruent vapourization reaction, Pr₂TeO₆ (s) = Pr₂O₃ (s) + TeO₂ (g) + ½ O₂ (g) could be represented as: $ { \log }\left\{ {{{p\left( {{\text{TeO}}_{ 2} ,\;{\text{g}}} \right)} \mathord{\left/ {\vphantom {{p\left( {{\text{TeO}}_{ 2} ,\;{\text{g}}} \right)} {{\text{Pa}} \pm 0.0 4}}} \right. \kern-0em} {{\text{Pa}} \pm 0.0 4}}} \right\} = 19. 12- 27132\; \left({\rm{{{\text{K}}}}/T} \right) $ . The $ \Updelta_{\text{f}} G^{^\circ } \;\left( {{ \Pr }_{ 2} {\text{TeO}}_{ 6} } \right) $ could be represented by the relation $ \left\{ {{{\Updelta_{\text{f}} G^{^\circ } \left( {{ \Pr }_{ 2} {\text{TeO}}_{ 6} ,\;{\text{s}}} \right)} \mathord{\left/ {\vphantom {{\Updelta_{\text{f}} G^{^\circ } \left( {{ \Pr }_{ 2} {\text{TeO}}_{ 6} ,\;{\text{s}}} \right)} {\left( {{\text{kJ}}\,{\text{mol}}^{ - 1} } \right)}}} \right. \kern-0em} {\left( {{\text{kJ}}\,{\text{mol}}^{ - 1} } \right)}} \pm 5.0} \right\} = - 2 4 1 5. 1+ 0. 5 7 9 3\;\left(T/{\text{K}}\right) .$ Enthalpy increments of Pr₂TeO₆ were measured by drop calorimetry in the temperature range of 573–1,273 K and heat capacity, entropy and Gibbs energy functions were derived. The $ \Updelta_{\text{f}} H_{{298\;{\text{K}}}}^{^\circ } \;\left( {{ \Pr }_{ 2} {\text{TeO}}_{ 6} } \right) $ was found to be $ {{ - 2, 40 7. 8 \pm 2.0} \mathord{\left/ {\vphantom {{ - 2, 40 7. 8 \pm 2.0} {\left( {{\text{kJ}}\,{\text{mol}}^{ - 1} } \right)}}} \right. \kern-0em} {\left( {{\text{kJ}}\,{\text{mol}}^{ - 1} } \right)}} $ .     

Experimental and DFT study on complexation of Eu3+ with a macrocyclic lactam receptor

From extraction experiments and $ \gamma $ -activity measurements, the extraction constant corresponding to the equilibrium $ {\text{Eu}}^{ 3+ } \left( {\text{aq}} \right) + 3 {\text{A}}^{ - } \left( {\text{aq}} \right) + {\mathbf{1}}\left( {\text{nb}} \right) \Leftrightarrow {\mathbf{1}} \cdot {\text{Eu}}^{ 3+ } \left( {\text{nb}} \right) + 3 {\text{A}}^{ - } \left( {\text{nb}} \right) $ taking place in the two-phase water–nitrobenzene system ( $ {\text{A}}^{ - } = \text {CF}_{3} \text{SO}_{3}^{ - } $ ; 1 = macrocyclic lactam receptor—see Scheme 1; aq = aqueous phase, nb = nitrobenzene phase) was evaluated as $ { \log } K_{{{\text{ex}} }} ({\mathbf{1}} \cdot {\text{Eu}}^{ 3+ } ,{\text{ 3A}}^{ - } )\; = \; - 4. 9 \pm 0. 1 $ . Further, the stability constant of the 1·Eu³⁺ cationic complex in nitrobenzene saturated with water was calculated for a temperature of 25 °C: $ { \log } \beta_{{{\text{nb}} }} ({\mathbf{1}} \cdot {\text{Eu}}^{ 3+ } ) \; = \; 8. 2 \pm 0. 1 $ . Finally, using DFT calculations, the most probable structure of the cationic complex species 1·Eu³⁺ was derived. In the resulting 1·Eu³⁺ complex, the “central” cation Eu³⁺ is bound by five bond interactions to two ethereal oxygen atoms and two carbonyl oxygens, as well as to one carbon atom of the corresponding benzene ring of the parent macrocyclic lactam receptor 1 via cation-π interaction.

Densities and Volumetric Properties of Butyl Acrylate + 1-Butanol, or +2-Butanol, or +2-Methyl-1-propanol, or +2-Methyl-2-propanol Binary Mixtures at Temperatures from 288.15 to 318.15 K

The densities, ρ, of binary mixtures of butyl acrylate with 1-butanol, 2-butanol, 2-methyl-1-propanol, and 2-methyl-2-propanol, including those of the pure liquids, were measured over the entire composition range at temperatures of (288.15, 293.15, 298.15, 303.15, 308.15, 313.15, and 318.15) K and atmospheric pressure. From the experimental data, the excess molar volume $ V_{\text{m}}^{\text{E}} $ V m E , partial molar volumes $ \overline{V}_{\text{m,1}} $ V ¯ m,1 and $ \overline{V}_{\text{m,2}} $ V ¯ m,2 , and excess partial molar volumes $ \overline{V}_{\text{m,1}}^{\text{E}} $ V ¯ m,1 E and $ \overline{V}_{\text{m,2}}^{\text{E}} $ V ¯ m,2 E , were calculated over the whole composition range as were the partial molar volumes $ \overline{V}_{\text{m,1}}^{^\circ } $ V ¯ m,1 ° and $ \overline{V}_{\text{m,2}}^{^\circ } $ V ¯ m,2 ° , and excess partial molar volumes $ \overline{V}_{\text{m,1}}^{{^\circ {\text{E}}}} $ V ¯ m,1 ° E and $ \overline{V}_{\text{m,2}}^{{^\circ {\text{E}}}} $ V ¯ m,2 ° E , at infinite dilution,. The $ V_{\text{m}}^{\text{E}} $ V m E values were found to be positive over the whole composition range for all the mixtures and at each temperature studied, indicating the presence of weak (non-specific) interactions between butyl acrylate and alkanol molecules. The deviations in $ V_{\text{m}}^{\text{E}} $ V m E values follow the order: 1-butanol < 2-butanol < 2-methyl-1-propanol < 2-methyl-2-propanol. It is observed that the $ V_{\text{m}}^{\text{E}} $ V m E values depend upon the position of alkyl groups in alkanol molecules and the interactions between butyl acrylate and isomeric butanols decrease with increase in the number of alkyl groups at α-carbon atom in the alkanol molecules.     

Thermal properties of Na2TeO4(s) and TiTe3O8(s)

Molar heat capacity measurement on Na₂TeO₄(s) and TiTe₃O₈(s) were carried out using differential scanning calorimeter. The molar heat capacity values were least squares analyzed and the dependence of molar heat capacity with temperature for Na₂TeO₄(s) and TiTe₃O₈(s) can be given as, $$ \begin{gathered} {\text{C}}^{\text{o}}_{{{\text{p}},{\text{m}}}} \left\{ {{\text{Na}}_{ 2} {\text{TeO}}_{ 4} \left( {\text{s}} \right)} \right\} \,={159}.17 { } + 1.2\,\times\,10^{-4}T-{55}.34\,\times\,10^{5}/T^{2};\hfill \\ C^{\text{o}}_{{{\text{p}},{\text{m}}}} \left\{ {{\text{TiTe}}_{ 3} {\text{O}}_{ 8} \left( {\text{s}} \right)} \right\}\,=\,{ 275}.22{ }+{4}.0\,\times\, 10^{-5}T-{58}.28\,\times\,10^{5}/T^{2};\hfill \\ \end{gathered} $$ From this data, other thermodynamic functions were evaluated.     

Thermochemical Properties of n-Undecylammonium Bromide Monohydrate C11H28BrNO(s)

The crystal structure of n-undecylammonium bromide monohydrate was determined by X-ray crystallography. The crystal system of the compound is monoclinic, and the space group is P2₁/c. Molar enthalpies of dissolution of the compound at different concentrations m/(mol·kg^?1) were measured with an isoperibol solution–reaction calorimeter at T = 298.15 K. According to the Pitzer’s electrolyte solution model, the molar enthalpy of dissolution of the compound at infinite dilution ( $ \Updelta_{\text{sol}} H_{\text{m}}^{\infty } $ ) and Pitzer parameters ( $ \beta_{\text{MX}}^{(0)L} $ and $ \beta_{\text{MX}}^{(1)L} $ ) were obtained. Values of the apparent relative molar enthalpies ( $ {}^{\Upphi }L $ ) of the title compound and relative partial molar enthalpies ( $ \bar{L}_{2} $ and $ \bar{L}_{1} $ ) of the solute and the solvent at different concentrations were derived from experimental values of the enthalpies of dissolution.     

Effect of size of tetraalkylammonium counterions on the temperature dependent micellization of AOT in aqueous medium

Different tetraalkylammonium, viz. N⁺(CH₃)₄, N⁺(C₂H₅)₄, N⁺(C₃H₇)₄, N⁺(C₄H₉)₄ along with simple ammonium salts of bis (2-ethylhexyl) sulfosuccinic acid have been prepared by ion-exchange technique. The critical micelle concentration of surfactants with varied counterions have been determined by measuring surface tension and conductivity within the temperature range 283–313 K. Counterion ionization constant, α, and thermodynamic parameters for micellization process viz., $\Delta G_m^{\text{0}} $ , $\Delta H_m^{\text{0}} $ , and $\Delta S_m^{\text{0}} $ and also the surface parameters, Γ_max and A_min, in aqueous solution have been determined. Large negative $\Delta G_m^{\text{0}} $ of micellization for all the above counterions supports the spontaneity of micellization. The value of standard free energy, $\Delta G_m^{\text{0}} $ , for different counterions followed the order $${\text{N}}^{\text{ + }} \left( {{\text{CH}}_{\text{3}} } \right)_4 >{\text{NH}}_{\text{4}}^{\text{ + }} >{\text{Na}}^{\text{ + }} >{\text{N}}^{\text{ + }} \left( {{\text{C}}_{\text{2}} {\text{H}}_5 } \right)_{\text{4}} {\text{ $>$ N}}^{\text{ + }} \left( {{\text{C}}_{\text{3}} {\text{H}}_{\text{7}} } \right)_4 >{\text{N}}^{\text{ + }} \left( {{\text{C}}_{\text{4}} {\text{H}}_{\text{9}} } \right)_4 $$ , at a given temperature. This result can be well explained in terms of bulkiness and nature of hydration of the counterion together with hydrophobic and electrostatic interactions.     

Synergistic extraction of some univalent cations into nitrobenzene by using sodium dicarbollylcobaltate and nonactin

From extraction experiments and γ-activity measurements, the exchange extraction constants corresponding to the general equilibrium $ {\text{M}}^{ + } \left( {\text{aq}} \right) \, + {\mathbf{1}}\cdot{\text{Na}}^{ + } \left( {\text{nb}} \right) \Leftrightarrow {\mathbf{1}}\cdot{\text{M}}^{ + } \left( {\text{nb}} \right) \, + {\text{Na}}^{ + } \left( {\text{aq}} \right) $ taking place in the two-phase water–nitrobenzene system $ \begin{gathered} ({\text{M}}^{ + } = {\text{ Li}}^{ + } ,{\text{ K}}^{ + } ,{\text{ Rb}}^{ + } ,{\text{ Cs}}^{ + } ,{\text{ H}}_{ 3} {\text{O}}^{ + } ,{\text{NH}}_{4}^{ + }, {\text{ Ag}}^{ + } ,{\text{ Tl}}^{ + } ;{\mathbf{1}} \\ = {\text{ nonactin}};{\text{ aq }} = {\text{ aqueous phase}},{\text{ nb }} = {\text{nitrobenzene phase}}) \\ \end{gathered} $ were determined. Moreover, the stability constants of the 1·M⁺ complexes in water-saturated nitrobenzene were calculated; they were found to increase in the series of $ {\text{Cs}}^{ + } < {\text{ Rb}}^{ + } < {\text{ H}}_{ 3} {\text{O}}^{ + } ,{\text{ Ag}}^{ + } < {\text{ Tl}}^{ + } < {\text{ Li}}^{ + } < {\text{ K}}^{ + } < {\text{NH}}_{4}^{ + } $ .     

Synthesis and structural characterization of three dinuclear Copper(II) complexes incorporating pyrazolyl-derived ligands

Three new binuclear copper complexes of formulae $ \left[ {{\text{Cu}}_{2}^{\text{II}} {\text{Pz}}_{2}^{\text{Me3}} {\text{Br}}_{ 2} \left( {{\text{PPh}}_{ 3} } \right)_{ 2} } \right] $ (1), $ \left[ {{\text{Cu}}_{ 2}^{\text{II}} {\text{Pz}}_{2}^{\text{Ph2Me}} {\text{Cl}}_{ 2} \left( {{\text{PPh}}_{ 3} } \right)_{ 2} } \right] $ (2) and $ \left[ {{\text{Cu}}_{2}^{\text{II}} \left( {{\text{Pz}}^{\text{PhMe}} } \right)_{ 4} {\text{Cl}}_{ 4} } \right] $ (3) (Pz^Me3?=?3,4,5-trimethylpyrazole, Pz^Ph2Me?=?4-methyl-3,5-diphenylpyrazole and Pz^PhMe?=?3-methyl-5-phenylpyrazole) have been synthesized and characterized by chemical analysis, FTIR and ³¹P NMR spectroscopy and single-crystal X-ray diffraction. Complex 1 is a doubly bromo-bridged dimer, while complexes 2 and 3 are chloro-bridged dimers. The Cu(II) centers are in a distorted tetrahedral geometry for 1 and 2 and a distorted square pyramidal N₂Cl₃ environment for 3.     

To determine the half-life for gemcitabine hydrochloride using microcalorimetry

The enthalpies of dissolution of gemcitabine hydrochloride in 0.9 % normal saline (medical) and citric acid solution were measured using a microcalorimeter at 309.65 K under atmospheric pressure. The differential enthalpy $ \left( {\Updelta_{\text{dif}} H_{\text{m}}^{{{\theta}}} } \right) $ and molar enthalpy $ \left( {\Updelta_{\text{sol}} H_{\text{m}}^{{{\theta}}} } \right) $ of dissolution were determined, respectively. The corresponding kinetic equation described the dissolution were elucidated to be da/dt = 10^?3.84(1 ? a)^0.92 and da/dt = 10^?3.80(1 ? a)^1.21. Besides, the half-life, $ \Updelta_{\text{sol}} H_{\text{m}}^{{{\theta}}} ,\;\Updelta_{\text{sol}} G_{\text{m}}^{{{\theta}}} $ and $ \Updelta_{\text{sol}} S_{\text{m}}^{{{\theta}}} $ of the dissolution were also obtained. Obviously, it will provide a simple and reliable method for the clinical application of gemcitabine hydrochloride.     

Thermochemistry of hydroxymethylphenol isomers

The standard (p° = 0.1 MPa) molar enthalpies of formation in the crystalline state of the 2-, 3- and 4-hydroxymethylphenols, $ {{\Updelta}}_{\text{f}} H_{\text{m}}^{\text{o}} ( {\text{cr)}} = \, - ( 3 7 7. 7 \pm 1. 4)\,{\text{kJ}}\,{\text{mol}}^{ - 1} $ , $ {{\Updelta}}_{\text{f}} H_{\text{m}}^{\text{o}} ( {\text{cr) }} = - (383.0 \pm 1.4) \, \,{\text{kJ}}\,{\text{mol}}^{ - 1} $ and $ {{\Updelta}}_{\text{f}} H_{\text{m}}^{\text{o}} ( {\text{cr)}} = - (382.7 \pm 1.4)\,{\text{kJ}}\,{\text{mol}}^{ - 1} $ , respectively, were derived from the standard molar energies of combustion, in oxygen, to yield CO₂(g) and H₂O(l), at T = 298.15 K, measured by static bomb combustion calorimetry. The Knudsen mass-loss effusion technique was used to measure the dependence of the vapour pressure of the solid isomers of hydroxymethylphenol with the temperature, from which the standard molar enthalpies of sublimation were derived using the Clausius–Clapeyron equation. The results were as follows: $ \Updelta_{\rm cr}^{\rm g} H_{\rm m}^{\rm o} = (99.5 \pm 1.5)\,{\text{kJ}}\,{\text{mol}}^{ - 1} $ , $ \Updelta_{\rm cr}^{\rm g} H_{\rm m}^{\rm o} = (116.0 \pm 3.7) \,{\text{kJ}}\,{\text{mol}}^{ - 1} $ and $ \Updelta_{\rm cr}^{\rm g} H_{\rm m}^{\rm o} = (129.3 \pm 4.7)\,{\text{ kJ mol}}^{ - 1} $ , for 2-, 3- and 4-hydroxymethylphenol, respectively. From these values, the standard molar enthalpies of formation of the title compounds in their gaseous phases, at T = 298.15 K, were derived and interpreted in terms of molecular structure. Moreover, using estimated values for the heat capacity differences between the gas and the crystal phases, the standard (p° = 0.1 MPa) molar enthalpies, entropies and Gibbs energies of sublimation, at T = 298.15 K, were derived for the three hydroxymethylphenols.     

Spectroscopic Studies on the Thermodynamics of the Complexation of Trivalent Curium with Propionate in the Temperature Range from 20 to 90 °C

The thermodynamics of the stepwise complexation reaction of Cm(III) with propionate was studied by time resolved laser fluorescence spectroscopy (TRLFS) and UV/Vis absorption spectroscopy as a function of the ligand concentration, the ionic strength and temperature (20–90 °C). The molar fractions of the 1:1 and 1:2 complexes were quantified by peak deconvolution of the emission spectra at each temperature, yielding the log₁₀ $ K_{n}^{\prime } $ values. Using the specific ion interaction theory (SIT), the thermodynamic stability constants log₁₀ $ K_{n}^{0} (T) $ were determined. The log₁₀ $ K_{n}^{0} (T) $ values show a distinct increase by 0.15 (n = 1) and 1.0 (n = 2) orders of magnitude in the studied temperature range, respectively. The temperature dependency of the log₁₀ $ K_{n}^{0} (T) $ values is well described by the integrated van’t Hoff equation, assuming a constant enthalpy of reaction and $ \Updelta_{\text{r}} C^\circ_{{p,{\text{m}}}} = 0, $ yielding the thermodynamic standard state $ \left( {\Updelta_{\text{r}} H^\circ_{\text{m}} ,\Updelta_{\text{r}} S^\circ_{\text{m}} ,\Updelta_{\text{r}} G^\circ_{\text{m}} } \right) $ values for the formation of the $ {\text{Cm(Prop)}}_{n}^{3 - n} $ , n = (1, 2) species.     

Pre-formulation of an oral cyclosporine free of surfactant

The purpose of this study was to develop a new oral cyclosporine A (CsA) formulation free of surfactant cremophor using cyclodextrin terpolymers (P-αβ-CD, P-βγ-CD and P-αγ-CD) as excipients in attempt to enhance its stability, dissolution rate and eliminate surfactant side effects. Two spray-dried dispersions (SDDs) containing poorly water-soluble CsA were prepared with either P-αβ-CD, P-βγ-CD or P-αγ-CD using water ( $ F_{{{\text{H}}_{2} {\text{O}}}} $ ) and ethanol (F _EOH) via spray-drying technique and characterized by scanning electron microscopy, powder X-ray diffraction, particle size distribution, circular dichroism (CD) and nuclear magnetic resonance along with the dissolution study which was compared to Neoral^® and Sandimmune^®. The results showed an interaction between CsA and P-αβ-CD, P-βγ-CD and P-αγ-CD without secondary structure change of CsA. The order of the CsA release from the terpolymers was ranked as follows: P-αγ-CD/CsA ( $ F_{{{\text{H}}_{2} {\text{O}}}} $ ) = Neoral^® > P-βγ-CD/CsA ( $ F_{{{\text{H}}_{2} {\text{O}}}} $ ) > P-αβ-CD/CsA ( $ F_{{{\text{H}}_{2} {\text{O}}}} $ ) > P-αγ-CD/CsA (F _EOH) > Sandimmune^® > P-αβ-CD/CsA (F _EOH) > P-βγ-CD/CsA (F _EOH). The results of ( $ F_{{{\text{H}}_{2} {\text{O}}}} $ ) could be explained by hydrophilisation and absence of crystallinity of CsA while maintaining part of its crystallinity in the case of formulations (F _EOH). In summary, developed SDD formulations P-αγ-CD/CsA ( $ F_{{{\text{H}}_{2} {\text{O}}}} $ ) revealed same dissolution profile as Neoral^® and better than Sandimmune^®. These systems seem to be stable to carry cyclosporine and release it, while preserving structure and thus, potentially, also maintaining cyclosporine activity.     

Subsolidus phase diagram of the binary system (n-C n H2n+1NH3)2CoCl4

The perovskite-type layered compounds decylammonium tetrachlorocobaltate (n-C₁₀H₂₁NH₃)₂CoCl₄ and dodecylammonium tetrachlorocobaltate (n-C₁₂H₂₅NH₃)₂CoCl₄ exist the solid–solid phase transition in the temperatures range 330–380 K. These laminar materials contain bilayers sandwiched between metal halide layers. The experimental subsolidus binary phase diagram of (n-C₁₀H₂₁NH₃)₂CoCl₄–(n-C₁₂H₂₅NH₃)₂CoCl₄ has been established over the whole composition range by differential thermal analysis and X-ray diffraction. In the phase diagram, one intermediate compound (n-C₁₀H₂₁NH₃) (n-C₁₂H₂₅NH₃)CoCl₄ at $ W_{{{\text{C}}_{ 1 0} {\text{Co}}}} \% = 50. 9 2 $ and two eutectoid invariants points at $ W_{{{\text{C}}_{ 10} {\text{Co}}}} \% = 2 9. 8 3 $ and $ W_{{{\text{C}}_{ 10} {\text{Co}}}} \% = 7 7. 9 8 $ were observed, two eutectoids temperatures are about 343 ± 1 and 340 ± 1 K. There are three noticeable solid solution ranges (α, β, γ) at the left and right boundary and middle of the phase diagram.     

The influence of pH on the stability constants of lanthanum and europium complexes with humic acids

Complex formation of humic acids (HA)_n with La³⁺ and Eu³⁺ was studied. Commercial (HA)_n was purified and characterized. The stability constants were determined at several pH values and 0.2?M NaClO₄ ionic strength by the Shubert??s method of radiochemical ionic exchange. The slopes of the lines $ \log ((\lambda_{0} /\lambda ) - 1) = \log \beta_{\text{M,j(HA)n}}^{\exp } + {\text{j}} * \log \left[ { ( {\text{HA)}}_{\text{n}} } \right] $ were dependent on the [(HA)_n]. The values of log $ \beta_{\text{M,j(HA)n}}^{\exp } $ for j?=?1 were the following: 6.29?±?0.04 (pH 4.9?±?0.4) and 7.61?±?0.03 (pH 5.9?±?0.1) for lanthanum and 7.31?±?0.01 (pH 5.9?±?0.2) for europium. Log $ \beta_{\text{M,j(HA)n}}^{\exp } $ was determined as well for higher values of the j parameter and these values were: 12.2?±?0.1 (j?=?2, pH 7.7?±?0.2), 15.6?±?0.2 (j?=?3, pH 4.9?±?0.4) and 16.05?±?0.07 (j?=?3, pH 5.9?±?0.1), for lanthanum and 13.18?±?0.03 (j?=?2, pH 5.9?±?0.1) for europium. A discussion is presented about the complex formation regarding pH and [(HA)_n].     

Sorption of benzene vapors to flexible metal–organic framework [Zn2(bdc)2(dabco)]

The isotherms of benzene sorption by the metal–organic coordination polymer [Zn₂(bdc)₂(dabco)] were studied within the temperature range 25–90 °C at pressures up to 75 torr. The maximal benzene content in [Zn₂(bdc)₂(dabco)] at room temperature was demonstrated to correspond to the composition [Zn₂(bdc)₂(dabco)]·3.8C₆H₆. It was established that the process of benzene desorption from the substance under investigation occurs in three stages. (1) Evaporation of benzene from the phase of variable composition (phase C) with compression and distortion of the unit cell (the composition of the phase C varies from [Zn₂(bdc)₂(dabco)]·3.8C₆H₆ to [Zn₂(bdc)₂(dabco)]·3.2C₆H₆). (2) The transformation of the phase C into phase P. The phase P has the same unit cell geometry as that for the empty framework. The maximal benzene content is [Zn₂(bdc)₂(dabco)]·1.0C₆H₆. (3) Benzene evaporation from the phase P of variable composition. We studied the temperature dependences of the equilibrium vapor pressure of benzene for the samples with compositions [Zn₂(bdc)₂(dabco)]·3.0(3)C₆H₆ and [Zn₂(bdc)₂(dabco)]·2.0(3)C₆H₆ within the temperature range 290–370 K. The thermodynamic parameters of benzene vaporization were determined for the latter compound ( $ \Updelta {\text{H}}_{{{\text{av}} .}}^{o} = 49\left( 1 \right) \,{\text{kJ }}\left( {{\text{moleC}}_{6} {\text{H}}_{6} } \right)^{ - 1} $ ; $ \Updelta {\text{S}}_{{{\text{av}} .}}^{^\circ } = 100\left( 3 \right)\, {\text{J}}\left( {{\text{moleC}}_{6} {\text{H}}_{6} {\text{K}}} \right)^{ - 1} $ ; $ \Updelta {\text{G}}_{298}^{^\circ } = 19.0\left( 2 \right)\, {\text{kJ}}\left( {{\text{moleC}}_{6} {\text{H}}_{6} } \right)^{ - 1} $ ).     

Specific heat capacity and thermodynamic properties of CuTeO3 and HgTeO3

Tellurites of CuTeO₃ and HgTeO₃ are synthesized and their specific molar heat capacities are experimentally determined for the first time. The tellurites discussed in the present paper are used for preparation of optical glasses with special properties for optoelectronics, nuclear and power industries. The tellurites synthesized are prepared for chemical analysis, differential thermal analysis and X-ray analysis. The use of the tellurites studied is related to knowing their thermodynamic properties like specific molar heat capacity (C _p,m), enthalpy \( \left( {\Delta_{{{\text {T}}^{\prime}}}^{\text{T}} H_{\text{m}}^{0} } \right), \) entropy \( \left( {\Delta_{{{\text {T}}^{\prime}}}^{\text{T}} S_{\text{m}}^{0} } \right) \) and Gibbs energy \( \left( { - \Delta_{{{\text {T}}^{\prime}}}^{\text{T}} G_{\text{m}}^{0} } \right) \) . The temperature dependences of their molar heat capacities are determined using the least squares method. The thermodynamic properties are calculated: entropy, enthalpy and Gibbs function.     

Volumetric and Viscometric Studies in Binary Liquid Mixtures of 2-Methyl-2-propanol with Some Ketones at Different Temperatures

Densities, ??, and viscosities, ??, of binary mixtures of 2-methyl-2-propanol with acetone (AC), ethyl methyl ketone (EMK) and acetophenone (AP), including those of the pure liquids, were measured over the entire composition range at 298.15, 303.15 and 308.15?K. From these experimental data, the excess molar volume $V_{\mathrm{m}}^{\mathrm{E}}$ , deviation in viscosity ????, partial and apparent molar volumes ( $\overline{V}_{\mathrm{m},1}^{\,\circ }$ , $\overline{V}_{\mathrm{m},2}^{\,\circ }$ , $\overline{V}_{\phi ,1}^{\,\circ}$ and $\overline{V}_{\phi,2}^{\,\circ} $ ), and their excess values ( $\overline{V}_{\mathrm{m},1}^{\,\circ \mathrm{E}}$ , $\overline{V}_{\mathrm{m,2}}^{\,\circ \mathrm{ E}}$ , $\overline {V}_{\phi \mathrm{,1}}^{\,\circ \mathrm{ E}}$ and $\overline{V}_{\phi \mathrm{,2}}^{\,\circ \mathrm{ E}}$ ) of the components at infinite dilution were calculated. The interaction between the component molecules follows the order of AP > AC > EMK.