聚氨酯-接枝-磺化聚氧乙烯的合成及其血液相容性研究

通过梳状的磺化聚氧乙烯接枝共聚醚和４,４’ 二苯甲烷二异氰酸酯（ＭＤＩ）反应,合成了磺酸根离子和聚氧乙烯复合修饰的聚氨酯（ＰＥＵ ｇ ＰＥＯ ＳＯ３Ｎａ）．通过血小板粘附试验对材料的体外抗凝血性试验表明将具有“类肝素”生物活性的磺酸根离子通过ＰＥＯ为“间隔臂”固定在聚醚氨酯上,不仅可以有效地阻抗血小板的粘附、活化,还可以有效地阻断内外源凝血途径,具有较好的血液相容性．     

Synthesis and characterization of PEGylated comb-like cationic polymer by polycondensation and ATRP

PEGylated poly(2-(dimethylamino)ethyl methacrylate) with comb-like architecture was synthesized by two-step polymerization. First,poly(oligo(ethylene glycol) malicate)(POEGMA) bearing pendant hydroxyl groups was prepared by direct polycondensation of oligo(ethylene glycol) and malic acid in the presence of scandium triflate as chemoselective catalyst.Then the poly(2- (dimethylamino)ethyl methacrylate) side chains were grafted from the POEGMA backbone by atom transfer radical polymerization (ATRP) after the hydroxyl groups were modified into bromo-ester form,resulting in a PEGylated cationic copolymer with branched architecture.     

含聚氧化乙烯嵌段的三元多嵌段共聚物的合成和性能

用聚乙二醇、聚丙二醇、遥爪羟基聚苯乙烯和二氯甲烷在氢氧化钾存在下合成了氧亚甲基连接的聚氧化乙烯－聚氧化丙烯－聚苯乙烯多嵌段聚合物；并研究其乳化性能和相转移催化性能。     

聚氧乙烯功能基复合修饰聚氨酯的合成及其血液相容性研究 (Ⅰ)──聚氨酯-接枝-十八烷基聚氧乙烯

通过十八烷基聚氧乙烯和环氧氯丙烷的封端反应制备了α-环氧基-ω-十八烷基聚氧乙烯大单体.并采用BF₃·Et₂O引发THF和大单体共聚合,得到了梳状的十八烷基聚氧乙烯接枝共聚醚.以该共聚醚为软段合成了十八烷基和聚氧乙烯复合修饰的聚氨酯(PEU-g-PEO-C₁₈).通过血小板粘附试验对材料的体外抗凝血性实验结果表明,采用具有选择性吸附白蛋白功能的十八烷基和PEO复合修饰聚氨酯,材料表面血小板粘附量明显减少.材料血液相容性的改善可能来源于疏水性的十八烷基和亲水性聚氧乙烯的协同作用.     

Carbon monoxide-releasing micelles for immunotherapy

With the discovery of important biological roles of carbon monoxide (CO), the use of this gas as a therapeutic agent has attracted attention. However, the medical application of this gas has been hampered by the complexity of the administration method. To overcome this problem, several transition-metal carbonyl complexes, such as Ru(CO)(3)Cl(glycinate), [Ru(CO)(3)Cl(2)](2), and Fe(η(4)-2-pyrone)(CO)(3), have been used as CO-releasing molecules both in vitro and in vivo. We sought to develop micellar forms of metal carbonyl complexes that would display slowed diffusion in tissues and thus better ability to target distal tissue drainage sites. Specifically, we aimed to develop a new CO-delivery system using a polymeric micelle having a Ru(CO)(3)Cl(amino acidate) structure as a CO-releasing segment. The CO-releasing micelles were prepared from triblock copolymers composed of a hydrophilic poly(ethylene glycol) block, a poly(ornithine acrylamide) block bearing Ru(CO)(3)Cl(ornithinate) moieties, and a hydrophobic poly(n-butylacrylamide) block. The polymers formed spherical micelles in the range of 30-40 nm in hydrodynamic diameter. Further characterization revealed the high CO-loading capacity of the micelles. CO-release studies showed that the micelles were stable in physiological buffer and serum and released CO in response to thiol-containing compounds such as cysteine. The CO release of the micelles was slower than that of Ru(CO)(3)Cl(glycinate). In addition, the CO-releasing micelles efficiently attenuated the lipopolysaccharide-induced NF-κB activation of human monocytes, while Ru(CO)(3)Cl(glycinate) did not show any beneficial effects. Moreover, cell viability assays revealed that the micelles significantly reduced the cytotoxicity of the Ru(CO)(3)Cl(amino acidate) moiety. This novel CO-delivery system based on CO-releasing micelles may be useful for therapeutic applications of CO.     

磷酸钙骨水泥/聚肽共聚物生物复合材料力学性能及微观结构

磷酸钙骨水(Calcium Phosphate Cement,CPC)是一种新型的人工骨材料,可用于人体骨缺损的修复,具有良好的生物相容性、骨传导性和骨替代性．然而,磷酸钙骨水泥的抗压强度较低,脆性较大,限制了其应用,因而提高抗压强度和减小其脆性成为CPC研究领域的一个重要课题．目前,普遍采用添加纤维的方法来提高CPC材料的抗压强度和韧性．然而大多数的纤维是非降解性的．     

选择性接聚乙烯醇枝聚醚氨酯的合成及其血液相容性

合成了α－甲基，ω－（２，３－环氧丙基）－聚乙二醇醚（Ⅱ）．经水解得到悬挂聚乙二醇（ＰＥＧ）枝的丙二醇－２，３（Ⅲ）．用二元醇（Ⅲ）为扩链剂制得了在硬链段上接有ＰＥＧ枝的聚醚氨酯（Ｈ－ＰＥＵ）．以四氢呋喃与少量大分子单体（Ⅱ）进行正离子开环共聚合制得每个链接有约１．３个ＰＥＧ枝的聚丁二醇（Ⅳ），用以合成了在软链段上接有ＰＥＧ枝的聚醚氨酯（Ｓ－ＰＥＵ）．ＥＳＣＡ及抗凝血性研究结果表明，不同位置接枝的ＰＥＵ，其表面都有明显的聚醚链段富集．Ｓ－ＰＥＵ抗凝血复钙时间只比未接枝者增长约２０％，而Ｈ－ＰＥＵ则增约一倍，比Ｓ－ＰＥＵ增约６０％．随ＰＥＧ最增大，复钙时间增长．     

Heteroarm H‐shaped terpolymers through click reaction

Heteroarm H‐shaped terpolymers, (polystyrene)(poly(methyl methacrylate))‐ poly(tert‐butyl acrylate)‐(polystyrene)(poly(methyl methacrylate)), (PS)(PMMA)‐PtBA‐(PMMA)(PS), and, (PS)(PMMA)‐poly(ethylene glycol)(PEG)‐(PMMA)(PS), through click reaction strategy between PS‐PMMA copolymer (as side chains) with an alkyne functional group at the junction point and diazide end‐functionalized PtBA or PEG (as a main chain). PS‐PMMA with alkyne functional group was prepared by sequential living radical polymerizations such as the nitroxide mediated (NMP) and the metal mediated‐living radical polymerization (ATRP) routes. The obtained H‐shaped polymers were characterized by using ¹H‐NMR, GPC, DSC, and AFM measurements. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1055–1065, 2007     

Interaction between cationic, anionic, and non-ionic surfactants with ABA block copolymer Pluronic PE6200 and with BAB reverse block copolymer Pluronic 25R4

The interaction in aqueous solution between either the normal block copolymer poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide): Pluronic PE6200 [(EO)(11)-(PO)(28)-(EO)(11)], or the reverse block copolymer poly(propylene oxide)-poly(ethylene oxide)-poly(propylene oxide): Pluronic 25R4 [(PO)(19)-(EO)(33)-(PO)(19)] and the surfactants sodium decylsulfate, C(10)OS, decyltrimethyl ammonium bromide, C(10)TAB, and pentaethylene glycol monodecyl ether, C(10)E(5), was investigated and the aggregation behavior of these surfactants with Pluronics was compared. Surface tension measurements show that Pluronics in their non-aggregated state better interact with the anionic surfactant C(10)OS than with cationic and non-ionic ones. The presence of the two Pluronics induces the same lowering of the aggregation number of C(10)OS as shown by fluorescence quenching measurements. The number of polymer chains necessary to bind each C(10)OS aggregate has been estimated to be approximately 6 for PE6200 and approximately 2 for 25R4. Furthermore, this surfactant also induces the same increment in the gyration radius of the polymers as revealed by viscosimetry. Calorimetric results have been reasonably reproduced by applying a simple equilibrium model to the aggregation processes.     

主链含酰亚胺环和炔基的聚酰亚胺型聚氨酯弹性体的合成及阻燃性能

以均苯四甲酸酐、 D,L-苯丙氨酸和1,4-丁炔二醇为原料合成了一种含有酰亚胺环和炔基的二醇, 并以其为扩链剂, 采用预聚体法, 与4,4-二苯基甲烷二异氰酸酯(MDI)和聚四氢呋喃醚二醇(PTMG)反应, 合成了不同硬段含量的主链含有酰亚胺环和炔基的热塑性聚酰亚胺型聚氨酯弹性体. 用红外光谱(FTIR)、 电子拉力机、 热失重分析(TG)、 广角X射线衍射(XRD)、 UL-94垂直燃烧和极限氧指数对聚酰亚胺型聚氨酯弹性体进行了表征. 结果表明, 这种聚氨酯呈现出无定形结构; 其拉伸强度随着硬段含量的增加而增大; 与传统的热塑性聚氨酯相比, 酰亚胺环和炔基改性的聚酰亚胺型聚氨酯弹性体的热分解过程非常缓慢, 呈现出较好的热稳定性; 不同硬段含量的聚酰亚胺型聚氨酯弹性体的UL-94垂直燃烧均达到V-2级别; 其极限氧指数随着硬段含量的增加而增大.     

主链含酰亚胺环和炔基的聚酰亚胺型聚氨酯弹性体的合成及阻燃性能简

以均苯四甲酸酐、D,L-苯丙氨酸和1,4-丁炔二醇为原料合成了一种含有酰亚胺环和炔基的二醇,并以其为扩链剂,采用预聚体法,与4,4-二苯基甲烷二异氰酸酯(MDI)和聚四氢呋喃醚二醇(PTMG)反应,合成了不同硬段含量的主链含有酰亚胺环和炔基的热塑性聚酰亚胺型聚氨酯弹性体. 用红外光谱(FTIR)、电子拉力机、热失重分析(TG)、广角X射线衍射(XRD)、UL-94垂直燃烧和极限氧指数对聚酰亚胺型聚氨酯弹性体进行了表征. 结果表明,这种聚氨酯呈现出无定形结构;其拉伸强度随着硬段含量的增加而增大;与传统的热塑性聚氨酯相比,酰亚胺环和炔基改性的聚酰亚胺型聚氨酯弹性体的热分解过程非常缓慢,呈现出较好的热稳定性;不同硬段含量的聚酰亚胺型聚氨酯弹性体的UL-94垂直燃烧均达到V-2级别;其极限氧指数随着硬段含量的增加而增大.     

Amphiphilic Seven-arm Star Triblock Copolymers with Diverse Morphologies in Aqueous Solution Induced by Crystallization and pH

Well-defined amphiphilic seven-arm star triblock copolymers containing hydrophobic crystalline poly(ε-caprolactone)(PCL) blocks, hydrophobic non-crystalline poly(tert-butyl acrylate)(PtBA) blocks and hydrophilic poly(ethylene glycol)(PEG) blocks were precisely synthesized by a combination of ring-opening polymerization(ROP), atom transfer radical polymerization(ATRP) and “click” reaction. Such star copolymers could self-assemble into “core-shell-corona” micelles and “multi-layer” vesicles depending on the fraction of each block. Meanwhile, the selective hydrolysis of middle PtBA blocks into the poly(acrylic acid)(PAA) blocks allowed the star block copolymers to further change their morphologies of aqueous aggregates in response to pH values.     

Preparation and characterization of mesoporous tetragonal sulfated zirconia

Mesoporous tetragonal sulfated zirconia with high surface area and narrow pore-size distribution was prepared using Zr(O-nPr)_4 as zirconium precursor,sulfuric acid as sulfur source and triblock copolymer poly(ethylene glycol)-poly(propylene glycol)-poly (ethylene glycol)(P123) as the template.The samples were characterized by X-ray diffraction,N_2 sorption,TEM,and NH_3-TPD. A phase transformation from monoclinic sulfated zirconia to tetragonal sulfated zirconia is observed.The product shows strong acidi...     

双模板法制备具有介孔孔壁的三维有序大孔二氧化铈及其改善的低温还原性能

以聚甲基丙烯酸甲酯(PMMA)为硬模板,三嵌段共聚物F127、十六烷基三甲基溴化铵(CTAB)或聚乙二醇(PEG)为软模板剂(表面活性剂),柠檬酸为络合剂,硝酸铈为金属前驱体,采用双模板法成功地合成出具有介孔孔壁的三维有序大孔(3DOM)结构的立方相CeO2样品CeO2-F127,CeO2-CTAB和CeO2-PEG,...     

羧酸型聚乙二醇聚氨酯离聚物及其导电性能

以聚环氧乙烷（ＰＥＯ）为软段，与４，４’－二苯甲烷二异氰酸酯（ＭＤＩ）预聚，以２，２’－二羟甲基丙酸（ＤＭＰＡ）扩链合成了含羧酸基团的聚氨酯，并经中和形成了含不同金属离子的离聚物．测定了样品的热分析数据和力学性能，利用交流阻抗分析仪测定了样品的阻抗谱，由此计算出样品的离子电导率．这类样品由于阴离子（－ＣＯＯ－）固定在聚合物分子链上，因此只有单一阳离子迁移．结果表明，羧酸型聚氨酯离聚物既有较高的单一离子电导率又具有优良的力学性能．讨论了不同软段分子量、硬段含量和金属抗衡离子对离子电导性能的影响     

Synthesis of Cu1.8S and CuS from copper-thiourea containing precursors; anionic (Cl(-), NO3(-), SO4(2-)) influence on the product stoichiometry

A novel and unique understanding pertaining to the synthesis of Cu(1.8)S and CuS in bulk was achieved from the analysis of the products of the Cu-Tu precursors, with Cl(-), NO(3)(-), and SO(4)(2-) as the counteranions, in ethylene glycol. [Cu(4)(tu)(9)](NO(3))(4)·4H(2)O always yielded CuS whether the dissociation was carried out in ethylene glycol in the presence of air or argon or under solvothermal conditions. Cu(1.8)S was the only product when [Cu(tu)(3)]Cl was dissociated in air as well as in flowing argon in ethylene glycol. A mixture of Cu(1.8)S and CuS was formed from the chloride ion containing precursor when dissociated solvothermally. [Cu(2)(tu)(6)]SO(4)·H(2)O yielded a mixture of CuS and Cu(1.8)S on dissociation in the presence of air and argon, as well as under solvothermal conditions. The oxidizing power of the anions Cl(-), SO(4)(2-), and NO(3)(-), present in the precursor, greatly determined the extent of formation of Cu(1.8)S and CuS. While Cu(1.8)S showed hexagonal plate like morphology, flower like morphology was observed for CuS in the SEM images. In the mixed phase, Cu(1.8)S + CuS, both these morphologies were present. Cu(1.8)S and CuS showed scattering resonances at 470 cm(-1) and 474 cm(-1), respectively, in the Raman spectrum. Magnetization measurements at room temperature revealed diamagnetic behavior for Cu(1.8)S indicating the presence of +1 oxidation state for copper. Weak paramagnetic behavior was observed for CuS with χ(M) value of 1.198 × 10(-3) emu/mol at 300 K. Both Cu(1.8)S and CuS showed similar emission behavior in the photoluminescence spectrum with band positions centered at around 387, 390, 401, 423, and 440 nm. The origin of photoluminescence in these two copper sulfides remains elusive.     

两亲聚合物表面的反相气相色谱分析

采用反相气相色谱探针技术研究了苯乙烯－氧乙烯－苯乙烯三嵌段两亲聚合物的表面物理化学性质。包括表面吸附热力学函数,表面能的色散分量以及表面分子链与探针的分子间相互作用,。探讨了共聚物中亲油性链段聚苯乙烯（PS）和亲水性链段聚氧乙烯（PEO）的组成比例与其表面性质的关系。结果表明共聚物表面组成中随PEO含量的增加,其表面能增大,表面分子链与探针分子的相互作用增强,表面吸附能力也增强。     

ATRP法合成聚去氢枞酸丙烯酸乙二醇酯的研究

本研究从歧化松香中提取的去氢枞酸(DHA)出发,经酰氯化后与丙烯酸(2-羟基)乙酯反应,合成了去氢枞酸丙烯酸乙二醇酯(DHAAGE);并以此为单体,2-溴-异丁酸乙酯(EBr-iB)为引发剂,CuBr/2,2'-联吡啶(2,2'-bipyridine)为催化体系,在90 oC下,利用原子转移聚合(ATRP)法制备了聚去氢枞酸丙烯酸乙二醇酯(PDHAAGE).利用FT-IR、1H-NMR和GPC对所制备的单体和聚合物进行了表征,同时考察了单体转化率随聚合反应时间的变化.结果表明,聚合反应动力学曲线呈良好线性关系,表观聚合速率常数kp′为3.6 ×10-7 s-1;所得聚合物的分子量分布很窄.     

自由基引发的可注射PLA-b-PEG-b-PLA大分子单体和α-CD超分子结构水凝胶的合成与表征

以数均分子量为6000的聚乙二醇为引发剂,以辛酸亚锡为催化剂引发丙交酯开环,再用甲基丙烯酸酐进行封端生成大分子单体.然后将大分子单体和α-环糊精混合,分别用维生素C和硫酸亚铁与过硫酸铵组成的氧化还原引发剂引发聚合,得到了两种不同结构的超分子结构水凝胶.用1HNMR,FTIR,TGA和XRD等分析测试手段对大分子单体及形成的水凝胶进行了表征.流变仪测试结果表明,该水凝胶固化时间合适,并具有可注射性.     

AB型聚乙二醇单甲醚-聚(L-丙氨酸)嵌段共聚物自组装过程的核磁共振研究

利用核磁共振方法研究了AB型双嵌段共聚物(MPEG45-b-PA32)在选择性溶剂中的自组装行为及胶束化过程.嵌段共聚物在三氟乙酸中聚氨基酸和聚乙二醇链段均处于自由运动状态,聚丙氨酸链段为无规线团结构.在向该溶液中逐渐加入氘代水的过程中,聚丙氨酸链段又重新聚集形成规整的二级结构.结合1H-NMR和COSY谱分析,结果显示这一自组装过程伴随着聚(L-丙氨酸)链段由无规线团向α-螺旋结构的构象转变,同时嵌段共聚物逐渐形成核-壳型胶束结构.利用透射电镜观察了所形成胶束的形态,嵌段共聚物主要形成粒径150 nm到220 nm的球形胶束.