An efficient method for the liquid-phase combinatorial synthesis of N4-substituted 1,4-benzodiazepine-2,5-diones has been developed. Poly(ethylene glycol) (PEG) stepwise reacted with bromoacetyl bromide, a primary amine and 2-azidobenzoic acid to give a potential PEG-bound dipeptide, which was reduced by NaI / acetic acid, along with concurrent cyclization and cleavage of the seven-membered heterocycle from the PEG support. 相似文献
Potential trichothecene photoaffinity reagents were prepared by coupling either the C-4 or C-15 alcohols derived from anguidine with (3-azido-5-methoxyphenoxy) acetic acid, 4-(3-azido-5-methoxyphenoxy)butyric acid, or N-(3-azido-5-methoxyphenyl) N'-(carboxymethyl) urea. The C-15 anguidine deriviatives of (3-azido-5-methoxyphenoxy)acetic acid and (3-azido-4-iodo-5-methoxyphenoxy) acetic acid possessed protein synthesis inhibition activity comparable to that of anguidine itself in Chinese hamster ovary and African Green Monkey kidney cell lines. 相似文献
Incorporating metal clusters within the skeleton of the organic polymers through a click reaction cannot only effectively prepare cluster–polymer composites, but also effectively avoid the cluster aggregation. Herein, an azide-containing lanthanide–titanium oxo cluster of Eu8Ti10-N3 ( Eu8Ti10-N3 =[Eu8Ti10(μ3-O)14(H2O)4(OAc)2(tbba)30(paza)4(THF)2] ⋅ 4 THF ⋅ 8 H2O ( 1 ), Htbba=4-tert-butylbenzoic acid, Hpaza=4-azidobenzoate, HOAc=acetic acid, THF=tetrahydrofuran) through an in situ solvothermal reaction of 4-azidobenzoic acid and 4-tert-butylbenzoic acid. Reaction of 1 with PEG ( PEG =methoxypoly(ethyleneglycol)alkyne, 2000 g mol−1) through CuI-catalyzed click chemistry generates a lanthanide–polymer composite of Eu8Ti10-N3@PEG ( 2 ). Investigation with IR, 1H NMR and ICP-OES of 2 indicates that the structural integrity of 1 is maintained in 2 . Study of the luminescent properties of 1 and 2 reveals that the quantum yield of 1 itself basically remains unchanged in 2 . Significantly, the formation of 2 cannot only effectively prevent the cluster 1 from aggregation, but also greatly enhance its solubility and adhesion to the substrate. Owing to the solubility and adhesion of luminescent materials being the key to their practical application, present work is thus of great significance for the development of metal cluster–polymer composite luminescent materials. 相似文献
Polymeric micelles with a polystyrene core, poly(acrylic acid)/poly(4-vinyl pyridine) (PAA/P4VP) complex shell and poly(ethylene glycol) & poly(N-isopropylacrylamide) (PEG & PNIPAM) mixed corona were synthesized and used as the supporter for the gold nanoparticles (GNs). It was concluded from the result of 1H NMR characterization that hydrophilic channels formed around PEG chains when PNIPAM collapsed above its lower critical solution temperature. The density of the channels in the corona can be tuned by changing the weight ratios of PEG chains to PNIPAM chains. The GNs were set in the PAA/P4VP complex layer and the catalytic activity of the GNs can be modulated by the channels. The catalytic activity increased with increasing the density of the channels in the corona. Meanwhile, the whole Au/micelle nanoparticles were stabilized by the extended PEG chains. 相似文献
A synthetic oxygen (O(2)) and carbon monoxide (CO) receptor (hemoCD) composed of 5,10,15,20-tetrakis(4-sulfonatophenyl)porphinatoiron(ii) and a per-O-methylated β-cyclodextrin dimer with a pyridine linker (Py3CD) was functionalised with poly(ethylene glycol) (PEG) to elongate the circulation time of the receptor in the bloodstream. α-PEG monocarboxylic acid (HOOC(CH(2))(3)(CO)O-PEG(mw)-OCH(3); mw = 750 or 5k) or α,ω-PEG dicarboxylic acid (HOOC(CH(2))(3)(CO)O-PEG(mw)-O(CO)(CH(2))(3)COOH; mw = 10k or 20k) was reacted with the amino group of 5-(4-aminophenyl)-10,15,20-tris(4-sulfonatophenyl)porphyrin to afford a porphyrin monomer having a PEG chain or a porphyrin dimer having a PEG linker, respectively. The ferrous complexes of these PEGylated porphyrins (PEG750-, PEG5k-, PEG10k- and PEG20k-hemoCDs) bound O(2) in aqueous solution, P(1/2) values being 6.5-8.1 Torr at pH 7.0 and 25 °C. Each PEG(mw)-hemoCD was infused into the femoral vein of a Wistar male rat. After 6 h of the infusions, 67, 82, 86 and 42% of PEG750-, PEG5k-, PEG10k- and PEG20k-hemoCD were excreted in the urine. PEG750-hemoCD with a hydrodynamic diameter (D(h)) of 3.4 nm seemed to partly leak from the blood vessels (pore size: 2-6 nm) before renal filtration (pore size: 4-14 nm). PEG5k- (D(h) = 6.2 nm) and PEG10k-hemoCDs (9.0 nm) hardly passed through the blood vessels but were fully filtered by the kidney, resulting in high excretion rates. A considerable amount of PEG20k-hemoCD (D(h) = 12.0 nm) was retained in the blood even at 6 h after administration. The present study demonstrates that the behaviour of hemoCD in blood after administration can be controlled by modification of hemoCD with PEG having an appropriate molecular weight. 相似文献
Nanoparticles possessing poly(ethylene glycol) (PEG) chains on their surface have been described as blood persistent drug delivery system with potential applications for intravenous drug administration. Considering the importance of protein interactions with injected colloidal dug carriers with regard to their in vivo fate, we analysed plasma protein adsorption onto biodegradable PEG-coated poly(lactic acid) (PLA), poly(lactic-co-glycolic acid) (PLGA) and poly(-caprolactone) (PCL) nanoparticles employing two-dimensional gel electrophoresis (2-D PAGE). A series of corona/core nanoparticles of sizes 160–270 nm were prepared from diblock PEG-PLA, PEG-PLGA and PEG-PCL and from PEG-PLA:PLA blends. The PEG Mw was varied from 2000–20 000 g/mole and the particles were prepared using different PEG contents. It was thus possible to study the influence of the PEG corona thickness and density, as well as the influence of the nature of the core (PLA, PLGA or PCL), on the competitive plasma protein adsorption, zeta potential and particle uptake by polymorphonuclear (PMN) cells. 2-D PAGE studies showed that plasma protein adsorption on PEG-coated PLA nanospheres strongly depends on the PEG molecular weight (Mw) (i.e. PEG chain length at the particle surface) as well as on the PEG content in the particles (i.e. PEG chain density at the surface of the particles). Whatever the thickness or the density of the corona, the qualitative composition of the plasma protein adsorption patterns was very similar, showing that adsorption was governed by interaction with a PLA surface protected more or less by PEG chains. The main spots on the gels were albumin, fibrinogen, IgG, Ig light chains, and the apolipoproteins apoA-I and apoE. For particles made of PEG-PLA45K with different PEG Mw, a maximal reduction in protein adsorption was found for a PEG Mw of 5000 g/mole. For nanospheres differing in their PEG content from 0.5 to 20 wt %, a PEG content between 2 and 5 wt % was determined as a threshold value for optimal protein resistance. When increasing the PEG content in the nanoparticles above 5 wt % no further reduction in protein adsorption was achieved. Phagocytosis by PMN studied using chemiluminescence and zeta potential data agreed well with these findings: the same PEG surface density threshold was found to ensure simultaneously efficient steric stabilization and to avoid the uptake by PMN cells. Supposing all the PEG chains migrate to the surface, this would correspond to a distance of about 1.5 nm between two terminally attached PEG chains in the covering ‘brush’. Particles from PEG5K-PLA45K, PEG5K-PLGA45K and PEG5K-PCL45K copolymers enabled to study the influence of the core on plasma protein adsorption, all other parameters (corona thickness and density) being kept constant. Adsorption patterns were in good qualitative agreement with each other. Only a few protein species were exclusively present just on one type of nanoparticle. However, the extent of proteins adsorbed differed in a large extent from one particle to another. In vivo studies could help elucidating the role of the type and amount of proteins adsorbed on the fate of the nanoparticles after intraveinous administration, as a function of the nature of their core. These results could be useful in the design of long circulating intravenously injectable biodegradable drug carriers endowed with protein resistant properties and low phagocytic uptake. 相似文献
<正>Poly(maleic anhydride-coacrylic acid),P(MA-AA),was synthesized by the free-radical copolymerization of maleic anhydride with acrylic acid,and fast responsive pH-sensitive poly(maleic anhydride-co-acrylic acid)/polyethylene glycol,P(MA-AA)/PEG,hydrogels were prepared using PEG as macromolecular cross-linking agent.FT-IR and ~1H-NMR spectrometry were applied to characterize the structure of P(MA-AA).The influences of pH and ionic strength on the swelling behavior of P(MA-AA)/PEG hydrogels and the swelling-deswelling changes along with the repeated changes between acid and alkali conditions were studied.The results showed that there was a hundredfold difference in the swelling ratios between the conditions of acid and alkali,and the swelling capability could not be weakened after multiple swelling-deswelling cycles.The results of swelling kinetics demonstrated that the response rate of P(MA-AA)/PEG hydrogels was very fast,because the swelling transition points always occurred at 10 min.The pH-responsive hydrogels reported here might be a smart material for potentially applications in many areas,including biosensors,drug-delivery devices and tissue engineering. 相似文献
Summary: The complexation between polystyrene‐block‐poly(acrylic acid) (PS‐b‐PAA) micelles and poly(ethylene glycol)‐block‐poly(4‐vinyl pyridine) (PEG‐b‐P4VP) is studied, and a facile strategy is proposed to prepare core‐shell‐corona micellar complexes. Micellization of PS‐b‐PAA in ethanol forms spherical core‐shell micelles with PS block as core and PAA block as shell. When PEG‐b‐P4VP is added into the core‐shell micellar solution, the P4VP block is absorbed into the core‐shell micelles to form spherical core‐shell‐corona micellar complexes with the PS block as core, the combined PAA/P4VP blocks as shell and the PEG block as corona. A model is suggested to characterize the core‐shell‐corona micellar complexes.
Schematic formation of core‐shell‐corona (CSC) micellar complexes by adsorption of PEG‐b‐P4VP into core‐shell PS‐b‐PAA micelles. 相似文献
