A one‐step strategy for aliphatic poly(carbonate‐ester)s with high performance derived from CO2, propylene oxide and l‐lactide

To improve the performance of PPC, aliphatic poly(carbonate‐ester)s were prepared in one‐step strategy from the terpolymerization of CO₂, propylene oxide (PO), and l ‐lactide (L ‐LA) catalyzed by zinc glutarate. Consequently giving high‐molecular weight terpolymers (PPCLAs) in a very high yield (8450.8–9435.8 g mol^?1 of Zn). The resulting terpolymers PPCLAs were characterized by ¹H NMR, showing that PPCLAs had an almost alternating structure for the components of CO₂, PO, and L‐LA. The influence of molecular weight and L‐LA content on the properties of PPCLAs was also investigated. Differential scanning calorimetry and thermogravimetric analysis (measurements revealed that the glass transition temperature (T _g) and thermal decomposition temperature (T _d) of PPCLAs are all much higher than those of PPC and increased with increasing molecular weight and L‐LA content. Tensile tests showed that the high mechanical properties of PPCLAs are due to the introduction of L‐LA into the copolymerization of CO₂ and PO. Furthermore, PPCLA4 exhibits high degradability, and after 10 weeks, the weight loss increases up to 6.58%, which is significantly higher than that of PPC of 4.58%. Copyright © 2016 John Wiley & Sons, Ltd.     

Regio‐regular structure high molecular weight poly(propylene carbonate) by rare earth ternary catalyst and Lewis base cocatalyst

Lewis base modification strategy on rare earth ternary catalyst was disclosed to enhance nucleophilic ability of active center during copolymerization of carbon dioxide and propylene oxide (PO), poly(propylene carbonate) (PPC) with H‐T linkages over 83%, and number–average molecular weight (M_n) up to 100 kg/mol was synthesized at room temperature using Y(CCl₃OO)₃‐ZnEt₂‐glycerine catalyst and 1,10‐phenanthroline (PHEN) cocatalyst. Coordination of PHEN with active Zinc center enhanced the nucleophilic ability of the metal carbonate, which became more regio‐specific in attacking carbon in PO, leading to PPC with improved H‐T linkages. Moreover, the binding of PHEN to active Zinc center also raised the carbonate content of PPC to over 99%, whereas the PPC from common rare earth ternary catalyst was about 96%. Unlike the highly regio‐regular structure PPC but with relatively low molecular weight recently reported in the literature, our high molecular weight regio‐regular PPC did show significant improvement in thermal and mechanical performances. PPC with H‐T linkages up to 83.2% showed glass transition temperature (T_g) of 43.3 °C, while T_g of PPC with H‐T linkages of 69.7% was only 36.1 °C. When H‐T connectivity was raised from 69.7 to 83.2%, the modulus of PPC showed a 78% increase. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4451–4458, 2008     

Fixation of carbon dioxide into aliphatic polycarbonate,cobalt porphyrin catalyzed regio‐specific poly(propylene carbonate) with high molecular weight

Cobalt porphyrin complex (TPPCo^IIIX) (TPP = 5, 10, 15, 20‐Tetraphenyl‐ porphyrin; X = halide) in combination with ionic organic ammonium salt was used for the regio‐specific copolymerization of propylene oxide and carbon dioxide. A turnover frequency of 188 h^?1 was achieved after 5 h, and the byproduct propylene carbonate was successfully controlled to below 1%, where the obtained poly(propylene carbonate) (PPC) showed number average molecular weight (M_n) of 48 kg/mol, head‐to‐tail content of 93%, and carbonate linkage of over 99%. When the polymerization time was prolonged to 24 h, PPC with M_n over 115 kg/mol and head‐to‐tail linkage maintaining 90% was prepared, whose glass transition temperature reached 44.5 °C. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5959–5967, 2008     

Hydrophilic CO2‐based biodegradable polycarbonates: Synthesis and rapid thermo‐responsive behavior

Common CO₂‐based biodegradable polycarbonates like poly(propylene carbonate) or poly(cyclohexene carbonate) are generally hydrophobic, leading to slow biodegradation rate and poor cell adhesion, which limit their applications in the biomedical field. Here hydrophilic polycarbonates were prepared by one‐pot terpolymerization of CO₂, propylene oxide (PO), and 2‐((2‐(2‐(2‐methoxyethoxy)ethoxy)ethoxy)methyl)oxirane (ME₃MO) using binary Salen Co(III)‐Cl/PPNCl catalyst system. The resultant terpolymers showed one glass transition temperature (T_g), which decreased with the increase of ME₃MO units in the terpolymers (F_ME3MO). Water contact angles of the resultant terpolymers with F_ME3MO of 4.2?23.6% were 68?25°, while that of poly(propylene carbonate) was 90°, indicating that the terpolymers became hydrophlilic. Furthermore, the terpolymers with F_ME3MO more than 25.8% exhibited reversible and rapid thermo‐responsive property in water, and the lower critical solution temperature (LCST) was highly sensitive to F_ME3MO. In particular, aqueous solution of the terpolymer with F_ME3MO of 72.6% showed a LCST around 35.2 °C, close to body temperature, which was promising for biomedical applications, especially for in vivo applications. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2834–2840.     

Copolymerization of propylene oxide and CO2 using achiral salophen Co(III) penta-florobenzoate as catalyst and tetrabutyl ammonium bromide as co-catalyst

Copolymerization of racemic propylene oxide with carbon dioxide is investigated in the presence of economically inexpensive and effective achiral salophenCo(III)X [salophen = N,N'-bis(3,5-di-tert-butylsalicylidene)-phenylenediimine, X = pentaflorobenzoate] catalyst and tetrabutyl ammonium bromide as co-catalyst. Effects of different variables like monomer to catalyst ratio, catalyst/co-catalyst ratio, temperature, pressure of CO₂ on molecular weight, yield and selectivity of poly(propylene carbonate) [PPC] have been investigated. The maximum M_w of 25.8 g/mol has been obtained at 15 bar and 50°C. All the samples were found to have excellent polydispersity near to 1.     

Copolymerization of carbon dioxide and propylene oxide catalyzed by two kinds of bifunctional salen-cobalt(III) complexes bearing four quaternary ammonium salts

Two new bifunctional salen-cobalt(III) complexes were synthesized, which consist of salicylaldehyde bearing four quaternary ammonium salts and two different diamines. The copolymerization results indicated that decreasing temperature is advantageous for both the complexes. Of both the diamines, the complex 9 with o-diaminobenzene has a higher catalytic effect compared to complex 6 with 1,2-diaminocyclohexane. The catalytic effect of complex 9 is over 3.5 times than that of complex 6 at a temperature of 30°C. The research of P_CO2 on the copolymerization revealed that the first-rank pressure was at 2 MPa for the two complexes. The highest turnover number are under conditions of T = 30°C, P_CO2 = 2 MPa, and t = 24 hr. Differential scanning calorimeter curves indicated that poly(propylene carbonate) (PPC) by complex 9 has the highest Tg of 54.2°C. DTGA curves showed that there were two thermal degradation peaks, the first is for the ester bond, and the second is for the C–C bond.     

Temperature‐responsive Catalyst for the Coupling Reaction of Carbon Dioxide and Propylene Oxide

The selective synthesis of polypropylene carbonate (PPC) and cyclic propylene carbonate (CPC) from coupling reaction of CO₂ and propylene oxide (PO) is a long term pursuing target. Here we report that a temperature controllable porphyrin aluminum catalyst using 5,10,15,20‐tetra(1,2,3,4,5,6, 7,8‐octahydro‐1,4:5,8‐dimethanoanthracen‐9‐yl)porphyrin as ligand, once in conjunction with suitable onium salt, achieved single cycloaddition or copolymerization reaction. Only cycloaddition reaction happened at temperature above 75 °C to produce 100% CPC, whereas copolymerization became dominant to afford PPC with selectivity over 99% at 25 °C, and the obtained PPC showed over 99% carbonate linkage and 92% head‐to‐tail structure. Based on systematic analysis of the electronic and steric feature in the porphyrin ligand, it was found that the electronic feature of the substituent in porphyrin ligand was decisive for PPC selectivity, porphyrin ligand bearing strong electron‐donating substituents displayed a significantly reduced tolerance towards increased temperature with respect to PPC formation. Therefore, temperature‐responsive catalyst could be designed by suitable modification in porphyrin ligand, and such accurate synthesis of target product by one catalyst may create a useful and facile platform for selective PPC or CPC production.     

Bifunctional aluminum porphyrin complex: Soil tolerant catalyst for copolymerization of 2 and propylene oxide

Due to the concern on residue toxic metal in biodegradable poly(propylene carbonate) (PPC), soil tolerant and heavy metal free aluminum complexes, that is, bifunctional aluminum porphyrin catalysts bearing quaternary ammonium salts on the ligand framework were prepared. Variation of the quaternary ammonium anion and the axial ligand had dramatic effects on the catalytic activity of resultant complex, among which complex 3b yielded perfectly alternative PPC with high molecular weight and relatively narrow polydispersity, and its TOF reached 3,407 h^?1 at [PO]/[cat.] ratio of 20,000 at 110 °C, although the PPC selectivity was 71%. By introducing specific substituent on the ligand framework, the electronic environment at the active center can be changed, among which complex 5b bearing tertiary butyl‐functionalized aryl substituents exhibited a TOF of 449 h^?1 at [PO]/[cat.] ratio of 5,000 at 70 °C, with PPC selectivity of 92% and number average molecular weight of 36 kg mol^?1. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2346–2355     

Viscoelastic properties of 1,2-polybutadiene—comparison with natural rubber and other elastomers

Viscoelastic properties of uncrosslinked 1,2-polybutadiene (91.5% vinyl, 7.0% cis, 1.5% trans, number-average molecular weight 99,000) were studied by dynamic shear measurements between 0.15 and 600 cps (torsion pendulum and Fitzgerald transducer) and shear creep measurements over time periods up to 3.7 × 10⁴ sec., in the temperature rang from 5 to 50°C. More limited dynamic measurements were made on a sample of unvulcanized natural rubber with number-average molecular weight 350,000 at frequencies from 0.4 to 400 cps and temperatures from 13 to 48°C. All data were reduced to 25°C. by shift factors calculated from equations of the WLF form with the following coefficients: 1,2-polybutadiene, c₁ = 6.23, c₂ = 72.5; natural rubber, c₁ = 5.94, c₂ = 151.6. In the transition zone, the relative positions of the loss tangent curves on the logarithmic frequency scale for these and other rubbers (1,4-polybutadiene with 50% trans configuration; styrene–butadiene rubber with 23.5% styrene content; and polyisobutylene) provided relative measures of local segment mobility. At 25°C., these ranged over a factor of 3700 with 1,2-polybutadiene and polyisobutylene the lowest and 1,4-polybutadiene the highest. When the frequency scale of each rubber was reduced to a temperature 100°C. above its glass transition temperature, however, the loss tangent curves for all except polyisobutylene were nearly coincident; the latter still showed a lower mobility by a factor of about 1/800. The terminal relaxation time and steady-state compliance for the 1,2-polybutadiene calculated from the Rouse theory were larger than those observed experimentally. The level of compliance corresponding to the entanglement network of 1,2-polybutadiene, J_eN, was calculated by integration over the loss compliance, J″, to be 1.62 × 10^?7 cm.²/dyne; integration over G″ to obtain the corresponding modulus gave reasonable agreement. From such J_eN, values, the average number of chain atoms between entanglement points, jZ_e, was estimated as follows: 1,2-polybutadiene, 132; natural rubber, 360; 1,4-polybutadiene, 110; styrene–butadiene rubber, 186; polyisobutylene, 320. Values of jZ_e were also estimated from the minimum in the loss tangent and compared with those reported from the molecular weight dependence of viscosity. The three sources were in generally good agreement.     

Synthesis and properties of polylactide terpolymers P(LLA‐TMC‐GA) catalyzed by zirconium (IV) acetylacetonate

A series of L‐lactide (LLA), 1,3‐trimethylene carbonate (TMC) and glycolide (GA) terpolymers (LTG) of different monomer molar ratios were synthesized by using ring‐opening copolymerization. An effective and low‐toxic zirconium (IV) acetylacetonate Zr(Acac)₄ was used as catalyst. The viscosity‐average molecular weights (M_η) of obtained polymers were all above 2.2×10⁴ g/mol. The chemical structure and viscosity of terpolymers were confirmed by Fourier transform infrared spectroscopy (FTIR), ¹H nuclear magnetic resonance (¹HNMR), ¹³C nuclear magnetic resonance (¹³CNMR) and an Ubbelohde viscometer. The thermal and mechanical properties were investigated by means of differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), X‐ray diffraction (XRD) and stress‐strain measurements. Results suggested that all terpolymers were amorphous and showed good thermal stability. Also it was found that elongation increased with the decreasing of LLA unit. More importantly, terpolymers displayed shape memory property when deformation temperatures were 14‐15 °C above T_g.     

Synthesis and structural characterization of syndiotactic trans‐1,2 and cis‐1,2 polyhexadienes

The (E) isomer in mixtures of (E) and (Z) 1,3‐hexadiene was polymerized with the system CoCl₂(PⁱPrPh₂)₂‐MAO, a highly active and stereospecific catalyst for the preparation of 1,2 syndiotactic polybutadiene. A new crystalline polymer with a melting point of 109 °C was obtained. The polymer was characterized by IR, NMR (¹³C, ¹H in solution and ¹³C in the solid‐state), X‐ray diffraction, DSC, GPC and it was found to have a trans‐1,2 syndiotactic structure with a 5.18 ± 0.04 Å fiber periodicity. Since only the (E) isomer was polymerized, at the end of the reaction we were able to separate the (Z) isomer, which was ultimately polymerized with CpTiCl₃‐MAO at low temperature, obtaining a low molecular weight, stereoregular polymer that, characterized by IR and NMR methods, was found to exhibit a cis‐1,2 syndiotactic structure, never reported before. Molecular mechanics calculations were carried out on the trans‐1,2 syndiotactic polymer and structural models consistent with the X‐ray diffraction data are proposed. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5339–5353, 2007     

Preparation of poly(propylene‐co‐γ‐butyrolactone carbonate) and release profiles of drug‐loaded microcapsules

A new aliphatic poly(propylene‐co‐γ‐butyrolactone carbonate) (PPCG) was successfully synthesized through the copolymerization of carbon dioxide, propylene oxide (PO), and γ‐butyrolactone (GBL). GBL was inserted into the backbone of PO–CO₂. The glass transition of PPCG was as high as 16 °C, far higher than that (?1.5 °C) of poly(propylene carbonate) (PPC). The decomposition temperatures of PPCG and PPC were only slightly different. Because of the existence of the GBL ester unit, PPCG had stronger degradability than PPC in a pH 7.4 phosphate‐buffered solution. However, when the PO/GBL ratio increased beyond 5:2, the excessive amount of GBL was not added to the polymerization. PPCG and PPC microcapsules were prepared by the water‐in‐oil‐in‐water multiple‐emulsion method. Glucose was encapsulated. The PPCG microcapsules, about 2 μm in diameter, had smooth and spherical surfaces. The glucose release test revealed that the glucose release speed of the PPCG–glucose microcapsules was more than eight times faster than that of the PPC–glucose microcapsules in a pH 7.4 phosphate‐buffered solution. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2468–2475, 2005     

The microstructure determination of ethylene‐styrene‐propylene terpolymers at triad level by high‐temperature two‐dimensional NMR spectra

To further extend temperature range of application and low temperature performance of the ethylene‐styrene copolymers, a series of poly(ethylene‐styrene‐propylene) samples with varying monomer compositions and relatively low glass‐transition temperatures (T_g = −28 – 22 °C) were synthesized by Me₂Si(Me₄Cp)(N‐t‐Bu)TiCl2/MMAO system. Since the ¹³C NMR spectra of the terpolymers were complex and some new resonances were present, 2D‐¹H/¹³C heteronuclear single quantum coherence and heteronuclear multiple bond correlation experiments were conducted. A complete ¹³C NMR characterization of these terpolymers was performed qualitatively and quantitatively, including chemical shifts, triad sequence distributions, and monomer average sequence lengths. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 340–350     

Synthesis of bromine-functionalized polyolefins by scandium-catalyzed copolymerization of 10-bromo-1-decene with ethylene,propylene, and dienes

By use of a THF-containing trimethylsilylmethyl scandium catalyst system (C₅Me₄SiMe₃)Sc(CH₂SiMe₃)₂(THF)/[Ph₃C][B(C₆F₅)₄], the multi-component copolymerization of 10-bromo-1-decene (BrDC) with ethylene, propylene, and dienes has been achieved to afford a new family of bromine-functionalized polyolefins with controllable composition and high molecular weight. The copolymerization of BrDC with ethylene afforded the well-defined BrDC–ethylene copolymers with high BrDC incorporation (up to 12 mol%) and high molecular weight (M_w > 100 kg mol⁻¹). The terpolymerization of propylene, ethylene with BrDC afforded random ethylene–propylene–BrDC terpolymers with controllable bromine content (2 ~ 11 mol%), high molecular weight (M_w > 100 kg mol⁻¹) and low glass transition temperature (T_g = −51 °C ~ −67 °C). Moreover, the tetrapolymerization of ethylene, propylene, BrDC, and ethylidene norbornene or conjugated dienes such as isoprene and myrcene has been achieved for the first time to afford selectively the bromine-functionalized ethylene–propylene–diene rubbers containing various types of double bonds.     

High‐molecular‐weight poly(1,2‐propylene succinate): A soft biobased polyester applicable as an effective modifier of poly(l‐Lactide)

Poly(1,2‐propylene succinate) (PPS) having high molecular weight can be synthesized by multi‐step melt‐polycondensation of succinic acid (SA) and 1,2‐propylene glycol (PG) with various catalysts. The first step is noncatalytic esterification/oligomerization of the two monomers, followed by the second step of catalytic melt‐polycondensation. In this step, co‐catalyst systems of Zn(AcO)₂/Ge(OBu)₄ and Zn(AcO)₂/Ti(BuO)₄ are effective for obtaining PPS having middle molecular weights (>10.0 kDa). This middle‐molecular‐weight PPS is chain‐elongated in the third‐step polycondensation with Zn(AcO)₂ as the catalyst to obtain a molecular weight reaching 120 kDa. As verified by ¹H‐ and ¹³C‐NMR spectra combined with two‐dimensional experiments, PPS has a ω‐bis‐hydroxy structure where the PG units leave the secondary hydroxyl terminals in larger ratio than the primary hydroxyl terminals. The PPS polymers are amorphous in nature, showing T_g around −4 °C. PPS can be solution‐ and melt‐blended with poly(l ‐lactide) (PLLA). By melt‐blending a high‐molecular‐weight PPS in an amount of 7.5–15 wt %, the modulus of the PLLA films decreases below 2000 MPa and the tear strength increases twice, supporting the effectiveness of PPS polymer in imparting flexible nature to PLLA. PPS polymers can therefore be applicable as elastomeric or flexible plastic modifiers having a 100 % biobased content. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1795–1805     

Study of electronic effect in bifunctional catalysts for the copolymerization of CO2 and PO/CHO

Carbon dioxide (CO₂) is an easily available renewable carbon source that can be used as a comonomer in the catalytic ring-opening polymerization of epoxides to form aliphatic polycarbonates. Herein, a series of new Salen-Co(III) bifunctional catalysts were synthesized for the first time, and they were studied to catalyze the copolymerization of CO₂ and propylene oxide (PO)/cyclohexene oxide (CHO). At the same time, the effects of reaction conditions (electronic effect, temperature, time) on catalytic activity and selectivity were investigated. The results show that the Salen-Co(III) complexes with electron-withdrawing groups have higher selectivity and activity for propylene carbonate (PPC)/cyclohexylene carbonate (PCHC). At the same time, the Salen-Co(III) complexes can better catalyze the copolymerization of CHO and CO₂ than that of PO and CO₂. The catalytic efficiency of the four complexes increased with increasing temperature, and the best reaction condition is 80°C, 30 min and 2 MPa of CO₂.     

Stereoregular polycarbonate synthesis: Alternating copolymerization of CO2 with aliphatic terminal epoxides catalyzed by multichiral cobalt(III) complexes

Completely stereoregular polycarbonate synthesis was achieved with the use of unsymmetric multichiral cobalt‐based complexes bearing a derived chiral BINOL and an appended 1,5,7‐triabicyclo[4.4.0] dec‐5‐ene as catalyst for the copolymerization of CO₂ and aliphatic terminal epoxides at mild conditions. The (S,S,S)‐Co(III) complex 1c with sterically hindered substituent group is more stereoregular catalyst for the copolymerization of CO₂ and racemic propylene oxide to afford a perfectly regioregular poly(propylene carbonate) (PPC), with >99% head‐to‐tail linkages, >99% carbonate linkages, and a K_rel of 24.4 for the enchainment of (R)‐epoxide over (S)‐epoxide. The isotactic PPC exhibits an enhanced glass transition temperature of 47 °C, which is 10–12 °C higher than that of the corresponding irregular polycarbonate. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

One‐Pot Alkoxylation of Phenols with Urea and 1,2‐Glycols

A one‐pot epoxide‐free alkoxylation process has been developed for phenolic compounds. The process involves heating phenols and urea in 1,2‐glycols at 170‐190 °C using Na₂CO₃/ZnO as co‐catalysts under atmospheric conditions. During the course of this new alkoxylation reaction, a five‐membered ring cyclic carbonate intermediate, ethylene carbonate (EC) or propylene carbonate (PPC), was produced in‐transit as the key intermediate and was subsequently consumed by phenols to form alkoxylated ether alcohols as final products in excellent yields. For instance, phenol, bisphenol A (BPA), hydroquinone and resorcinol were converted into their respective mono‐alkoxylated ether alcohols on each of their phenolic groups in 80‐95% isolated yields. In propoxylation of phenols, this approach shows great product selectivity favoring production of high secondary alcohols over primary alcohols in isomeric ratios of nearing 95/5. Since ammonia (NH₃) and carbon dioxide (CO₂) evolving from the reaction can be re‐combined in theory into urea for re‐use, the overall net‐alkoxylation by this approach can be regarded as a simple condensation reaction of phenols with 1,2‐glycols giving off water as its by‐product. This one‐pot process is simple, safe and environmentally friendlier than the conventional alkoxylated processes based on ethylene oxide (EO) or propylene oxide (PO). Moreover, this process is particularly well‐suited for making short chain‐length alkoxyether alcohols of phenols.     

Crosslinkable poly(propylene carbonate): High‐yield synthesis and performance improvement

A crosslinking strategy was used to improve the thermal and mechanical performance of poly(propylene carbonate) (PPC): PPC bearing a small moiety of pendant C?C groups was synthesized by the terpolymerization of allyl glycidyl ether (AGE), propylene oxide (PO), and carbon dioxide (CO₂). Almost no yield loss was found in comparison with that of the PO and CO₂ copolymer when the concentration of AGE units in the terpolymer was less than 5 mol %. Once subjected to UV‐radiation crosslinking, the crosslinked PPC film showed an elastic modulus 1 order of magnitude higher than that of the uncrosslinked one. Moreover, crosslinked PPC showed hot‐set elongation at 65 °C of 17.2% and permanent deformation approaching 0, whereas they were 35.3 and 17.2% for uncrosslinked PPC, respectively. Therefore, the PPC application window was enlarged to a higher temperature zone by the crosslinking strategy. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5329–5336, 2006     

Alternating copolymerization of propylene oxide and carbon dioxide with highly efficient and selective (salen)Co(III) catalysts: Effect of ligand and cocatalyst variation

Synthetic routes to a series of new (salen)CoX (salen = N,N′-bis(salicylidene)-1,2-diaminoalkane; X = Br or pentafluorobenzoate (OBzF₅)) species are described. Several of these complexes are active for the copolymerization of propylene oxide (PO) and CO₂, yielding regioregular poly(propylene carbonate) (PPC) without the generation of propylene carbonate byproduct. Variation of the salen ligand, as well as the inclusion of organic-based ionic or Lewis basic cocatalysts, has dramatic effects on the resultant (salen) CoX catalytic activity. Highly active (R,R)-(salen- 1 )CoOBzF₅ (salen- 1 = N,N′-bis(3,5- di-tert-butylsalicylidene)-1,2-diaminocyclohexane) catalysts with [Ph₄P]Cl or [PPN]Y ([PPN] = bis(triphenylphosphine)iminium; Y = Cl or OBzF₅) cocatalysts exhibited turnover frequencies up to 720 h⁻¹ for rac-PO/CO₂ copolymerization, yielding PPC with greater than 90% head-to-tail connectivity. Additionally, the (R,R)-(salen- 1 )CoOBzF₅/[PPN]Cl catalyst system demonstrated a k_rel of 9.7 for the enchainment of (S)- over (R)-PO when the copolymerization was carried out at low temperatures. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5182–5191, 2006