On the transitional properties of rigid oligomers. The orientational order of the monomer 4-n-pentyl-4'-cyanobiphenyl and its platinum dichloride linked dimer

We have studied the orientational order of the monomer 4-n-pentyl-4'-cyanobiphenyl (5CB) and of the dimer, [PtCl₂(5CB)₂], formed by linking two cyanobiphenyl units via a platinum dichloride bridge, dissolved in a common nematic solvent, using deuterium NMR spectroscopy. Analysis of the second rank order parameters, obtained from these experiments, in terms of a molecular field theory yields the anisotropic solute-solvent strength parameter responsible for the solute alignment. In the limit of low solvent order the strength parameters for the monomer and dimer differ significantly, in accord with the differing anisotropies of these two solutes. However, as the solvent order increases, so the relative difference in the strength parameters decreases, tending to zero. A possible explanation for this intriguing behaviour is proposed.     

Solute alignment in liquid crystal solvents The Saupe ordering matrix for anthracene dissolved in uniaxial liquid crystals

We have described a theory for U, the potential of mean torque of rigid solutes at infinite dilution in a uniaxial liquid crystal phase; this may be used to calculate (S_xx - S_yy) and S_zz, the principal elements of the Saupe ordering matrix. In its simplest form U(ω) contains only second-rank terms and the dependence of the biaxiality (S_xx - S_yy) is determined by ω, a parameter which describes the departure of the potential of mean torque from cylindrical symmetry, and is predicted to be temperature independent. If dispersion forces are responsible for the magnitude of the orientational order parameter then ω should be independent of the solvent and depend only on the anisotropy in the electric polarizability of the solute. Indeed, this independence should result for any pair potential which can be factorized into a product of solute and solvent properties. These predictions are tested here by determining values of S_zz and (S_xx - S_yy) for anthracene-d₁₀ as a solute in several liquid crystal solvents, from the quadrupolar splittings obtained from the deuteron N.M.R. spectra. It is found that ω has a strong dependence on the nature of the solvent, which demonstrates that the solute ordering cannot be determined primarily by dispersion forces, or by a factorizable potential. There is also a weaker temperature dependence of λ observed for each binary mixture, and we show how this might be caused by a dependence of ω on solvent ordering, or by the inclusion of a fourth-rank term in U(ω).     

Positional effect of solute functional group among positional isomers in hydroxyl group-solvent and carbonyl group-solvent specific interactions in menthanol--water mixed solvents monitored by high-performance liquid chromatography

We have evaluated the hydroxyl group–solvent and carbonyl group–solvent specific interactions by using mostly an Alltima C₁₈ stationary phase and subsidiarily squalane-adsorbed C₁₈ phase, and by measuring the retention data of carefully selected solutes in 60:40, 70:30, 80:20 and 90:10 (%, v/v) methanol–water eluents at 25, 30, 35, 40, 45 and 50°C. The selected solutes are four positional isomers of phenylbutanol, 5-phenyl-1-pentanol, three positional isomers of alkylarylketone derived from butylbenzene, and 1-phenyl-2-hexanone. The magnitudes of carbonyl group–solvent specific interaction enthalpies are larger than those of hydroxyl group–solvent specific interaction enthalpies in general. We observed clear discrepancies in functional group–solvent specific interactions among positional isomers. The spatial accessibility of the functional group by the solvent molecules seems to govern the strength of interaction. The relationships between molecular structures and functional group accessibilities have been discussed. The specific functional group–mobile phase interactions obtained by the Alltima C₁₈ stationary phase were systematically different from those obtained by the squalane-impregnated C₁₈ stationary phase, which may be due to structural differences between the two phases.     

Pathway dependence of the efficiency of calculating free energy and entropy of solute–solute association in water

In this study we investigate two alternative pathways to compute the free energy and the entropy of small molecule association (ΔF_assoc and ΔS_assoc) in water. The first route (direct pathway) uses thermodynamic integration as function of the distance R between the solutes. The mean force and the mean covariance of the force with the energy in solution are calculated from molecular dynamics simulation followed by integration of these quantities with respect to the reaction coordinate R. The alternative approach examined (solvation pathway) would first remove the solutes from the solution using thermodynamic integration as function of a solvation coupling parameter λ, change the solute–solute distance in vacuo and then solvate back the solute pair at the new separation distance. The system studied was a pair of CH₄ molecules in water. We investigate the influence of the CH₄–water interaction strength on the obtained ΔF_assoc and ΔS_assoc values by changing van der Waals and Coulomb interaction and evaluated the accuracy and efficiency for the two pathways. We find that the direct route seems more suitable for the calculation of free energies of hydrophobic solutes while the solvation pathway performs better when calculating entropy changes for solutes that have a stronger interaction with the solvent.     

The nematic-isotropic two phase region in mixtures of quasi-spherical solutes in alkylcyanobiphenyls: An E.S.R. study using tempone as probe

The transitional behaviour of binary mixtures, each containing a non-mesomorphic quasi-spherical solute at a low mole fraction in a nematogenic solvent, has been investigated by E.S.R. spectroscopy using 4-oxo-2,2,6,6-tetramethyl-4-piperidinyl-1-oxy (tempone) as a spin probe. This approach makes use of the smaller coupling constant obtained for the spin probe in the orientationally ordered nematic phase relative to that obtained in the isotropic phase. The solutes included Et₄C (tetraethylmethane) and R₄Sn (R = C^b2bH₅, n-C_3H7 and nC_b4H₉). The solvents were 4-n-pentyl-4'-cyanobiphenyl (5CB) 4-n-hexyl-4'-cyanobiphenyl (6CB) and 4-n-heptyl-4'-cyanobiphenyl (7CB). This fast approach compares favourably with other studies. In addition it provides the tempone spectral parameter, f, which is a relative measure of the fraction of the nematic phase at different temperatures within the two phase region.     

2H-N.M.R. studies of flexibility and orientational order in nematic liquid crystals

Deuteron magnetic resonance spectroscopy (²H-N.M.R.) has been used to investigate the effect of the nematic environment on the flexibility and orientational order of two perdeuteriated cyanobiphenyl homologues: 4-methyl-4'-cyanobiphenyl (1CB-d₁₁) and 4-n-pentyl-4'-cyanobiphenyl (5CB-d₁₉). The systems studied were low concentrations of 1CB-d₁₁ and 5CB-d₁₉ dissolved in the nematic phases of 5CB, N-(-4-ethoxybenzylidene)-4'-n-butylaniline (EBBA), Merck ZLI-1132 (1132) and a 55wt% mixture of 1132: EBBA. The spectra are dramatically different in these environments. Previous studies on small solutes have suggested that in the 55wt% 1132: EBBA mixture (at 301.4 K) the dominant orienting mechanism depends on the size and shape of the molecule which suggests that it is a short range repulsive interaction. This interaction has been modelled by treating the liquid crystal as an elastic continuum and the solute as a collection of van der Waals spheres which stretch the liquid crystal in the two dimensions perpendicular to the director. The distortion of the liquid crystal depends on the dimensions of the solute, and the elastic energy is described in terms of a Hooke's law force constant, k. The model is extended to include flexible liquid crystal molecules and quadrupolar couplings are calculated for each conformation of the 5CB chain. Statistical averaging over all conformations gives an excellent fit to the experimental spectrum. The results for 1CB and 5CB show that in the other nematic phases contributions from additional mechanisms must be included. Previous studies of ²H₂ and other solutes indicate that the additional mechanism is the interaction between the solute molecular quadrupole moment and the mean electric field gradient of the liquid crystal.     

Electric field N.M.R. of pretransitional effects in liquid crystals A solute study

Pretransitional effects in the isotropic phase of liquid crystals are manifest in the N.M.R. spectra of solutes recorded in the presence of an applied electric field. The temperature dependence of the quadrupolar splittings of p-xylene-d₁₀ in the isotropic phase of the nematogen 4-n-pentyl-4'-cyanobiphenyl is investigated, and proves to be as expected from the Landau-de Gennes theory for pretransitional effects. The influence of temperature in the biphasic region of the phase diagram is very striking: the orientational ordering of the solute is temperature independent. The applied electric field not only determines the ordering of the solute, but also has a clear effect on the transition temperature. Electric field N.M.R. of solutes to study pretransitional effects is an alternative to the investigation of the nematogen itself.     

Nanofiltration studies of larger organic microsolutes in methanol solutions

Multistep organic solvent-based pharmaceutical syntheses of larger organic microsolutes having molecular weights (MW) in the range of 300–1000 generally require athermal separation processes because the active molecules and the intermediates are thermally labile. To that end, nanofiltration (NF) of methanol solutions of three selected solutes, safranin O (MW 351), brilliant blue R (MW 826) and vitamin B₁₂ (MW 1355) has been studied in a batch stirred cell for a dilute solution of each individual solute at 3034 kPa (440 psig). The solvent-resistant membranes investigated and their manufacturer-specified molecular weight cut-offs (MWCO) are MPF-44 (250), MPF-50 (700) and MPF-60 (400). During an initial transient period, the solvent flux decreased with time and the solute rejection increased with time for every membrane reaching a steady state after about 12 h. This behavior resulting from membrane compaction and pore size reduction was partially reversible. Additional studies using higher feed solute concentrations (1 and 3 wt.%) show considerable reduction in solvent flux and increase in solute rejection; the effect appears to be far more than that due to an increase in osmotic pressure and possible reasons for such a behavior have been suggested. The observed solute rejection values are generally significantly lower than the manufacturer-specified MWCO values. Additional studies varying the feed solution pressure through the membrane MPF-60 indicate that the variation of the percent rejection of solutes safranin O and brilliant blue R with the solvent flux tends to follow the relation suggested by the Finely Porous Model.     

2H NMR Spectroscopic Investigation of para-Nitroazobenzene Liquid Crystals

Ｔｈｅｕｎｉｑｕｅｐｒｏｐｅｒｔｙｏｆｔｈｅａｚｏｂｅｎｚｅｎｅｇｒｏｕｐｉｓｉｔｓｃｉｓ ｔｒａｎｓｉｓｏｍｅｒｉｚａｔｉｏｎｃａｕｓｅｄｂｙｂｅｉｎｇｉｒｒａｄｉａｔｅｄｗｉｔｈａｐｐｒｏｐｒｉａｔｅＵＶｌｉｇｈｔ(ｓｕｃｈａｓ 356ｎｍｗｈｉｃｈｄｅｐｅｎｄｓｏｎｔｈｅＵＶ Ｖｉｓｉｂｌｅａｂ ｓｏｒｐｔｉｏｎｏｆｔｈｅｃｏｍｐｏｕｎｄ)ａｎｄｔｈｕｓｍｏｎｏｍｅｒｉｃｏｒｐｏｌｙｍｅｒｉｃｌｉｑｕｉｄｃｒｙｓｔａｌｓｃｏｎｔａｉｎｉｎｇａｚｏｂｅｎ ｚｅｎｅｇｒｏｕｐｓｓｈｏｗ ｐｒｏｍｉｓｅｆ…     

Insights into the retention mechanism on an octadecylsiloxane-bonded silica stationary phase (HyPURITY C18) in reversed-phase liquid chromatography

Plots of the retention factor against mobile phase composition were used to organize a varied group of solutes into three categories according to their retention mechanism on an octadecylsiloxane-bonded silica stationary phase HyPURITY C18 with methanol-water and acetonitrile-water mobile phase compositions containing 10-70% (v/v) organic solvent. The solutes in category 1 could be fit to a general retention model, Eq. (2), and exhibited normal retention behavior for the full composition range. The solutes in category 2 exhibited normal retention behavior at high organic solvent composition with a discontinuity at low organic solvent compositions. The solutes in category 3 exhibited a pronounced step or plateau in the middle region of the retention plots with a retention mechanism similar to category 1 solutes at mobile phase compositions after the discontinuity and a different retention mechanism before the discontinuity. Selecting solutes and appropriate composition ranges from the three categories where a single retention mechanism was operative allowed modeling of the experimental retention factors using the solvation parameter model. These models were then used to predict retention factors for solutes not included in the models. The overwhelming number of residual values [log k (experimental) - log k (model predicted)] were negative and could be explained by contributions from steric repulsion, defined as the inability of the solute to insert itself fully into the stationary phase because of its bulkiness (i.e., volume and/or shape). Steric repulsion is shown to strongly depend on the mobile phase composition and was more significant for mobile phases with a low volume fraction of organic solvent in general and for mobile phases containing methanol rather than acetonitrile. For mobile phases containing less than about 20 % (v/v) organic solvent the mobile phase was unable to completely wet the stationary phase resulting in a significant change in the phase ratio and for acetonitrile (but less so methanol) changes in the solvation environment indicated by a discontinuity in the system maps.     

RISM study of the structure of sulphur dioxide at a plane wall

The reference interaction site model (RISM) was used to study the distribution of SO₂ molecules at a soft plane wall. The RISM formalism was adapted for the treatment of a mixture of SO₂ molecules as solvent, and spherical Lennard-Jones particles as solute. The latter were treated in the regime of infinite dilution, which has as a consequence neglect of the solute-solute distribution and the decomposition of the system of equations to a form in which one can independently solve the structure of the solvent and afterwards the solute-solvent correlations. Increasing the diameter of the solute and extrapolating the results towards an infinite radius, we obtained the density profiles of sulphur and oxygen atoms at the plane wall. The calculations were performed for two strengths of the wall-SO₂ interactions. The results show that the distribution of SO₂ molecules displays oscillatory behaviour. The oscillations are well expressed at the wall which attracts the SO₂ molecules with a strength which exceeds the thermal energy by less than one order of magnitude. In the case when the wall-SO₂ potential exhibits only a repulsive interaction, the density profiles are nearly monotonous. The angular distribution shows a strong orientational anisotropy in the immediate vicinity of the wall, but it decays very fast when going towards the interior of the bulk phase.     

Influence of operating conditions on the retention of phosphate in water by nanofiltration

The objective of this study was to investigate the retention of phosphate anions, H₂PO₄⁻ and HPO₄²⁻, by nanofiltration. The first part of this study deals with the characterisation of the NF200 membrane used in permeation experiments with aqueous solutions of neutral organic and charged inorganic solutes. In the second part the effects of feed pressure, ionic strength, concentration and pH on the retention of phosphate anions were investigated. Results show that the membrane is negatively charged, its pore radius is around 0.5 nm and the retention order for the salts tested was R(Na₂SO₄) > R(NaCl) > R(CaCl₂). The retentions of phosphate anions are in the order of 85% for H₂PO₄⁻ and 96% for HPO₄²⁻. They are relatively high when compared to retentions of other anions with the same charge. The retentions of phosphate anions, particularly the monovalent species, depend on the chemical parameters (feed concentration, ionic strength, and pH) and applied pressure. The experimental data were analysed using the Speigler–Kedem model and the transport parameters, i.e., the reflection coefficient (σ) and solute permeability (P_s) have been determined.     

NMR determination of smectic ordering of probe molecules

The NMR spectra of the three solutes ortho-, meta-, and para-dichlorobenzene in the nematic and smectic A phases of the liquid crystals 8CB and 8OCB are analyzed to yield two orientational order parameters for each solute. Extrapolation of the asymmetry in the energy parameters that describe the orientational ordering in the nematic phase are used to provide estimates of the strength of the nematic potential in the smectic A phase. The experimentally determined asymmetry of the orientational order parameters in the smectic A phase is then used in conjunction with Kobayashi-McMillan theory applied to solutes to give information about the smectic A layering and the nematic/smectic A coupling. In both smectic A solvents, the solute smectic coupling constant, tau, is negative (with the origin fixed at the center of the smectic layer) for all solutes. The signs and relative values of tau indicate that the ortho and para solutes favor the interlayer region while the meta solute is more evenly distributed throughout the layers.     

The application of BTEM to UV-vis and UV-vis CD spectroscopies: the reaction of Rh4(CO)12 with chiral and achiral ligands

Two different organometallic ligand substitution reactions were investigated: (1) an achiral reactive system consisting of Rh₄(CO)₁₂ + PPh₃  Rh₄(CO)₁₁PPh₃ + CO in n-hexane under argon; and (2) a chiral reactive system consisting of Rh₄(CO)₁₂ + (S)-BINAP  Rh₄(CO)₁₀BINAP + 2CO in cyclohexane under argon. These two reactions were run at ultra high dilution. In both multi-component reactive systems the concentrations of all the solutes were less than 40 ppm and many solute concentrations were just 1–10 ppm. In situ spectroscopic measurements were carried out using UV–vis (Ultraviolet–visible) spectroscopy and UV–vis CD spectroscopy on the reactive organometallic systems (1) and (2), respectively. The BTEM algorithm was applied to these spectroscopic data sets. The reconstructed UV–vis pure component spectra of Rh₄(CO)₁₂, Rh₄(CO)₁₁PPh₃ and Rh₄(CO)₁₀BINAP as well as the reconstructed UV–vis CD pure component spectra of Rh₄(CO)₁₀BINAP were successfully obtained from BTEM analyses. All these reconstructed pure component spectra are in good agreement with the experimental reference spectra. The concentration profiles of the present species were obtained by performing a least square fit with mass balance constraints for the reactions (1) and (2). The present results indicate that UV–vis and UV–vis-CD spectroscopies can be successfully combined with an appropriate chemometric technique in order to monitor reactive organometallic systems having UV and Vis chromophores.     

用线性溶剂化能相关(LSERs)方法评价聚合物包覆钛胶固定相并与相关固定相比较

利用线性溶剂化能相关(LSERs)方法对聚(乙基苯乙烯-二乙烯基苯)包覆钛胶固定相(ES-DVB-TiO₂)的保留行为进行评价,并与聚丁二烯涂覆钛胶固定相(PBD-TiO₂),键合硅胶固定相(ODS)和树脂固定相(PR-1)作了比较,计算出各变最对logk'的百分方差数,发现V₂、Σα₂^H,和Σβ₂^H对logk'有较大的贡献,与聚合物固定相PRP-1近似,因此它们有相似的保留机理,即吸附机理大于分配机理.     

Elution of organic solutes from different polarity sorbents using subcritical water

The intermolecular interactions between organic solutes and sorbent matrices under subcritical water conditions have been investigated at a pressure of 50 bar and temperatures ranging from 50 to 250°C. Both polar and nonpolar organics (chlorophenols, amines, n-alkanes, and polycyclic aromatic hydrocarbons) and five different sorbent matrices (glass beads, alumina, Florisil, silica-bonded C₁₈, and polymeric XAD-4 resins) were used. From the same matrix, the polar solutes always eluted at lower temperatures, while the moderately polar and nonpolar solutes only eluted at higher temperatures. Similar to matrix effects previously observed using supercritical carbon dioxide, the sorbent type greatly influenced the elution efficiency under subcritical water conditions. Lower temperatures are sufficient to elute a particular solute from glass beads, alumina, and Florisil, but higher temperatures (less polar water) are needed to elute the same solute from silica-bonded C₁₈. The highest temperatures were required to elute aromatic organics from XAD-4. These matrix effects demonstrate that, while low temperature water can break inert or dipole interactions between solutes and glass beads, alumina, and Florisil, higher temperature water is required to interrupt the van der Waals attractions between solutes and silica-bonded C₁₈, and even higher temperatures needed to overcome the π-electron interactions between aromatic solutes and XAD-4.     

Contribution of Steric Repulsion to Retention on an Octadecylsiloxane-Bonded Silica Stationary Phase in Reversed-Phase Liquid Chromatography

Plots of the retention factor against mobile phase composition were used to organize a varied group of solutes into three categories according to their retention mechanism on an octadecylsilioxane-bonded silica stationary phase, Ascentis ^TM C18, with acetonitrile-water and methanol-water mobile phase compositions containing 10–70% (v/v) organic solvent. The solutes in category 1 could be fit to a general retention model, Eq. (1), and exhibited normal retention behavior for the full composition range. The solutes in category 2 exhibited normal retention behavior at high organic solvent compositions with a discontinuity at low organic solvent mobile phase compositions. The solutes in category 3 exhibited a pronounced step or plateau in the middle region of the retention plots with a retention mechanism similar to category 1 at mobile phase compositions after the discontinuity and a different retention mechanism before the discontinuity. Selecting solutes and appropriate composition ranges from the three categories where a single retention mechanism was operative allowed modeling of the experimental retention factors using the solvation parameter model. These models were then used to predict retention factors for solutes excluded from the models. The overwhelming number of residual values, here defined as the difference between experimental and model predicted retention factors for the excluded solutes, could be explained by contributions from steric repulsion. The latter defined as the inability of solutes to fully insert themselves into the solvated stationary phase because of their size or conformation. Steric repulsion resulted in a systematic reduction in retention compared with predicted values for the fully inserted solute. The bonding density of the stationary phase; the type and composition of the mobile phase; and the size, conformation, type and number of functional groups on the solute are shown to affect the contribution of steric repulsion to the retention mechanism.     

Orientational effects of hydrogen bonding in liquid-crystalline solutions containing Schiff bases

Intermolecular hydrogen bonding in binary mixtures containing nematogenic Schiff bases as solvents and proton-donating non-mesomorphic solutes has been considered. Reasons for the anomalous concentration dependences of solute order parameters are discussed. A solution structure model of acetic acid in nematic solvents is proposed; constants of complex-dimer equilibrium and coefficients of the orientational correlation of the non-mesogenic solute are calculated on the basis of this model. Hydrogen bonded complex structure using ¹³C NMR has been studied and stability constants in isotropic solutions in chloroform have been calculated. The influence of the solvent orientational ordering on the complex stability is discussed. Data on the solvation isotopic effects in the solutions investigated, which confirm the adequacy of the model are given.