Selective oxoammonium salt oxidations of alcohols to aldehydes and aldehydes to carboxylic acids

The oxidation of alcohols to aldehydes using stoichiometric 4-acetamido-2,2,6,6-tetramethylpiperidine-1-oxoammonium tetrafluoroborate (1) in CH(2)Cl(2) at room temperature is a highly selective process favoring reaction at the carbinol center best able to accommodate a positive charge. The oxidation of aldehydes to carboxylic acids by 1 in wet acetonitrile is also selective; the rate of the process correlates with the concentration of aldehyde hydrate. A convenient and high yield method for oxidation of alcohols directly to carboxylic acids has been developed.     

A new oxidation of aldehydes to carboxylic acids

2-Hydroperoxyhexafluoro-2-propanol (HPHI) is a selective catalytic and stoichiometric reagent for the oxidation of aldehydes to acids under mildly basic conditions.     

Metal-free oxidative self-coupling of aldehydes or alcohols to symmetric carboxylic anhydrides

A metal-free synthesis of symmetrical anhydrides has been developed starting from aldehydes, both aliphatic and aromatic or primary benzylic alcohols. The reaction occurs at room temperature and makes use of trichloroisocyanuric acid (TCCA) as an oxidant providing the desired carboxylic anhydrides in satisfactory yields.     

New Pd-catalyzed selective reduction of carboxylic acids to aldehydes

A catalyst generated in situ from palladium acetate and tricyclohexylphosphine efficiently catalyzes the reduction of carboxylic acids with sodium hypophosphite in the presence of pivalic anhydride to give aldehydes with high selectivity. The low cost and convenient handling of the reagents makes this process a valuable alternative to hydrogenations and metal hydride reductions.     

General and practical conversion of aldehydes to homologated carboxylic acids

The reaction of aldehydes with trichloromethide followed by sodium borohydride or sodium phenylseleno(triethyl)borate under basic conditions affords homologated carboxylic acids in high yields. This operationally simple procedure provides a practical, efficient alternative to other homologation protocols. The approach is compatible with sensitive aldehydes including enals and enolizable aldehydes. It also offers convenient access to alpha-monodeuterated carboxylic acids.     

Selective aerobic oxidation of activated alcohols into acids or aldehydes in ionic liquids

Selective aerobic oxidation of activated primary alcohols into acids or aldehydes has been developed in ionic liquids. Under optimal conditions, various alcohols could be selectively converted into their corresponding acids or aldehydes in good to excellent yields. The newly developed catalytic systems could also be recycled and reused for three runs without any significant loss of catalytic activity.     

Amperometric determination of alcohols, aldehydes and carboxylic acids with an immobilized alcohol oxidase enzyme electrode.

A new enzyme electrode has been developed for the rapid and simple measurements of blood ethanol. A platinum electrode was coupled with immobilized alcohol oxidase, sensing the dissolved oxygen consumption amperometrically. Blood ethanol can be measured within several minutes without any pretreatments. The only reagent required is phosphate buffer. The enzyme electrode was found to respond not only to alcohols but also to aldehydes and carboxylic acids.     

Bis(trimethylsilyl)chromate catalyzed oxidations of alcohols to aldehydes and ketones with periodic acid

A facile, selective and high yielding bis(trimethylsilyl) chromate (BTSC) catalyzed selective oxidation of alcohols to aldehydes and ketones with periodic acid is reported.     

Efficient allylation of aldehydes promoted by carboxylic acids

A variety of carboxylic acids have been screened for mediating the allylation of aldehydes with allytributyltin in different solvents. A novel, general, and practical method of allylation of aldehydes promoted by carboxylic acids under mild reaction conditions has been developed. Among them, p-nitrobenzoic acid afforded high to quantitative yields of the homoallylic alcohol products, and can be easily recovered after workup by aqueous HCl. Glyoxylic acid self-catalyzed the allylation without adding any other promoter or catalyst to give the corresponding allylation product in good yield. The regioselectivity of the crotylation of aldehydes is tunable by controlling the acidity of the carboxylic acids. The crotylation of aldehydes produced the alpha-adduct as major products in moderate to good yields with CF(3)CO(2)H as a promoter. A possible mechanism for the allylation is also discussed.     

Studies on oxidations with IBX: oxidation of alcohols and aldehydes under solvent-free conditions

A variety of allylic and benzylic alcohols are oxidized to their respective carbonyl compounds with IBX under solvent-free conditions at ca. 60-70 °C. It has also been found that some of the aromatic aldehydes also undergo oxidation when heated with IBX at 90 °C under solvent-free conditions; notably, this transformation does not occur under the otherwise identical but heterogeneous conditions.     

An efficient and practical system for the catalytic oxidation of alcohols, aldehydes, and alpha,beta-unsaturated carboxylic acids

Upon exposure to commercial bleach (approximately 5% aqueous sodium hypochlorite), nickel(II) chloride or nickel(II) acetate is transformed quantitatively into an insoluble nickel species, nickel oxide hydroxide. This material consists of high surface area nanoparticles (ca. 4 nm) and is a useful heterogeneous catalyst for the oxidation of many organic compounds. The oxidation of primary alcohols to carboxylic acids, secondary alcohols to ketones, aldehydes to carboxylic acids, and alpha, beta-unsaturated carboxylic acids to epoxy acids is demonstrated using 2.5 mol % of nickel catalyst and commercial bleach as the terminal oxidant. We demonstrate the controlled and selective oxidation of several organic substrates using this system affording 70-95% isolated yields and 90-100% purity. In most cases, the oxidations can be performed without an organic solvent, making this approach attractive as a "greener" alternative to conventional oxidations.     

Sulfonated carbon catalyzed oxidation of aldehydes to carboxylic acids by hydrogen peroxide

Sulfonated carbon as a strong and stable solid acid catalyst exhibited excellent catalytic performance in various acid-catalyzed reactions. Here, sulfonated carbon, as catalyst for oxidation reaction, was prepared via the carbonization of starch followed by sulfonation with concentrated sulfuric acid. N₂ physisorption, X-ray diffraction, Fourier transform infrared spectroscopy, X-ray fluorescence and acid-base titration were used to characterize the obtained materials. The catalytic activity of sulfonated carbon was studied in the oxidation of aldehydes to carboxylic acids using 30 wt% H₂O₂ as oxidant. This oxidation protocol works well for various aldehydes including aromatic and aliphatic aldehydes. The sulfonated carbon can be recycled for three times without obvious loss of activity.     

Catalytic oxidation of aldehydes to carboxylic acids with hydrogen peroxide as oxidant

Alkyl and aryl aldehydes were catalytically oxidized to carboxylic acids in high yields with hydrogen peroxide as oxidant using benzeneseleninic acid as catalyst.     

高效钴氧化物催化羧酸可控加氢制醇（英文）

羧酸选择加氢是合成醇的重要方法,廉价高效的催化体系仍然在探索中.我们利用地球上储量丰富的钴氧化物作为催化剂,通过控制催化反应过程,进而实现高选择性地催化羧酸加氢制备醇.一系列含有不同官能团的羧酸可以被选择加氢至相应的醇类化合物,反应选择性可以满足工业生产要求.通过一系列的谱学表征以及理论计算,我们证实了钴氧化物在羧酸选择加氢反应中的优选活性位点位为氧化亚钴,从而建立了催化剂与反应活性之间的构效关系,为催化剂的理性设计提供指导.首先,我们选取硬脂酸加氢反应作为模型反应,通过对地球上储量丰富的氧化镍、四氧化三铁和四氧化三钴的催化活性对比发现,四氧化三钴催化剂活性最高,在473 K,2 MPa氢气条件下,反应速率可以达到1.2 mmol/(h·g).对四氧化三钴催化剂进行不同温度的预还原处理,我们发现催化剂的活性得到显著提高,其中573 K还原的样品活性最高,反应速率可以达到7.3 mmol/(h·g),要远远高于贵金属催化剂Pd/C(0.6 mmol/(h·g))和Pt/C(1.8 mmol/(h·g)).XRD结果表明,随着还原处理温度的不断升高,催化剂由四氧化三钴变为氧化亚钴,最终变为金属态的钴.当还原温度为573 K时,催化剂的组成为单一相氧化亚钴.XPS测试结果表明,当还原温度为573 K时,样品中只含有Co~(2+)的信号峰,并且Co/O的比例为1/1,进一步证明样品是纯态的氧化亚钴.从TEM照片中可以发现,在原始的四氧化三钴样品中观察到晶面间距为0.467和0.244 nm,分别对应四氧化三钴的(111)和(311)晶面.而对于573 K还原的样品只观察到一种晶面间距(0.246 nm),对应氧化亚钴的(111)晶面.结合表征手段和硬脂酸催化加氢活性结果,我们得出氧化亚钴是573 K还原样品催化羧酸加氢反应的活性位点.理论计算结果进一步证实了这个实验结论.理论计算结果表明,在氧化亚钴(111)晶面,硬脂酸加氢转换为十八醇是非常快速和高效的,然而,对于氢解C-C键和C-O键,需要耗费更高的能量,能垒约为1.2 e V.因为硬脂酸的吸附远远强于十八醇的吸附,硬脂酸的存在会抑制十八醇氢解形成烯烃的反应,只有当硬脂酸酸完全转化为十八醇,才会发生随后的氢解反应.通过控制催化反应过程,可以实现在氧化亚钴(111)晶面高选择性催化酸加氢至醇,也就是反应控制催化过程.基于氧化亚钴在硬脂酸加氢制备十八醇上的优异催化性能,我们进一步研究了一系列含有不同官能团的羧酸化合物的催化加氢,发现氧化亚钴表现出良好的官能团容忍度,可以实现高效、广谱的酸选择加氢至醇反应.     

Development of a one-pot method for the homologation of aldehydes to carboxylic acids

A highly efficient method is described for the one-carbon homologation of aldehydes to carboxylic acid derivatives employing the reaction of a 1,1-bis-dimethylphosphonate derivative with the aldehyde and controlled acid hydrolysis of the derived α-phosphonoenamine intermediate.     

The one-pot conversion of carboxylic acids to aldehydes via activated silyl carboxylates.

The trasformation of acids into aldehydes in a one-pot process is performed through the thermal decomposition of pentacoordinated silicon species.