Chemical effect of13N formed in butyric-d7 acid irradiated in a pile

A distinct phase effect was observed on the formation of¹³NH₃, H¹³NO_x and [¹³N]-amide in pile-irradiated butyric-d₇ acid, although the magnitude of the effect was rather smaller than that in deuterated trifluoroacetic, acetic and propionic acids previously reported. In frozen butyric-d₇ acid, most of¹³N was found in the forms such as¹³NH₃ (54.8±0.7%), H¹³NO_x (26.8±0.6%). and [¹³N]amide (15.9±1.8%). The yields of HC¹³N and [¹³N]aminobutyric acid were only 0.6±0.3 and 1.2±0.3% even in the liquid, respectively. The scavenger effect of acetic anhydride-d₆ on the formation of¹³NH₃, H¹³NO_x and [¹³N]amide was examined. In liquid and frozen carboxylic acids, the yields of¹³NH₃ and H¹³NO_x were proportional and inversely proportional to the number of hydrogen atoms in a target molecule in the region of the number of hydrogen from unity to eight.     

Phase and chemical effects on the reaction of13N formed in pile-irradiated carboxylic acid-dx

A remarkable temperature effect was observed on the formation of¹³NH₃ and H¹³NO_x in pile-irradiated acetic acid-d₄ and trifluoroacetic acid-d, although little effect was recognized on [¹³N] amide and [¹³N] amino acid. The scavenger effect of acetic anhydride-d₄ was examined for the¹³N-compounds formed in acetic acid-d₄. On¹³NH₃ and H¹³NO_x formed in acetic acid-d₄, propionic acid-d₆ and trifluoroacetic acid-d, a linear correlation was obtained between the yields of the¹³N-compounds and the number of hydrogen atoms in a target molecule. A reaction mechanism containing radical reactions is discussed.     

Phase behaviour of 1-hexyloxymethyl-3-methyl-imidazolium and 1,3-dihexyloxymethyl-imidazolium based ionic liquids with alcohols,water, ketones and hydrocarbons: The effect of cation and anion on solubility

The liquid–liquid equilibrium (LLE), or solid–liquid equilibrium (SLE) of more than 20 binary systems containing 1-hexyloxymethyl-3-methyl-imidazolium bis(trifluoromethylsulfonyl)-imide [C₆H₁₃OCH₂MIM][Tf₂N] with alcohol (butan-1-ol, or hexan-1-ol, or octan-1-ol), water and ketone (3-pentanone, or cyclopentanone) and of 1-hexyloxymethyl-3-methyl-imidazolium tetrafluoroborate [C₆H₁₃OCH₂MIM][BF₄] with alcohol (methanol, or ethanol, or butan-1-ol, or hexan-1-ol, or octan-1-ol), water and ketone (3-pentanone, or cyclopentanone) have been measured. The solubility of dialkoxy-imidazolium salts: (1) 1,3-dihexyloxymethyl-imidazolium bis(trifluoromethylsulfonyl)-imide [(C₆H₁₃OCH₂)₂IM][Tf₂N] in alcohol (butan-1-ol, or hexan-1-ol, or octan-1-ol, or decan-1-ol), in water and hydrocarbon (benzene, hexane and cyclohexane); (2) 1,3-dihexyloxymethyl-imidazolium tetrafluoroborate [(C₆H₁₃OCH₂)₂IM][BF₄] in alcohol (hexan-1-ol, or octan-1-ol, or decan-1-ol) and water have been measured. Measurements were carried out by using a dynamic method from T = 275 K to the boiling point of the solvent. In this work a systematic study of the impact of different factors on the phase behaviour of hexyloxy-imidazolium-based ionic liquids with polar and nonpolar solvents has been presented. Most of the examined systems showed immiscibility in the liquid phase with an upper critical solution temperature (UCST), or complete solubility of the ionic liquid at room temperature in many solvents. An increase in the alkyl chain length of alcohol resulted in an increase in the UCST. The choice of anion was shown to have large impact on the solubility: by changing the anion [Tf₂N]⁻ to [BF₄]⁻, the solubility dramatically decreased and the UCST increased. By contrast, increasing hydrogen bonding opportunities with the solvent by replacing a methyl group with the second alkoxy-group on the imidazolium ring results in an increase of the solubility.     

Aqueous Solutions of Ionic Liquids: Microscopic Assembly

Aqueous solutions of ionic liquids are of special interest, due to the distinctive properties of ionic liquids, in particular, their amphiphilic character. A better understanding of the structure–property relationships of such systems is hence desirable. One of the crucial molecular‐level interactions that influences the macroscopic behavior is hydrogen bonding. In this work, we conduct molecular dynamics simulations to investigate the effects of ionic liquids on the hydrogen‐bond network of water in dilute aqueous solutions of ionic liquids with various combinations of cations and anions. Calculations are performed for imidazolium‐based cations with alkyl chains of different lengths and for a variety of anions, namely, [Br]^?, [NO₃]^?, [SCN]^?, [BF₄]^?, [PF₆]^?, and [Tf₂N]^?. The structure of water and the water–ionic liquid interactions involved in the formation of a heterogeneous network are analyzed by using radial distribution functions and hydrogen‐bond statistics. To this end, we employ the geometric criterion of the hydrogen‐bond definition and it is shown that the structure of water is sensitive to the amount of ionic liquid and to the anion type. In particular, [SCN]^? and [Tf₂N]^? were found to be the most hydrophilic and hydrophobic anions, respectively. Conversely, the cation chain length did not influence the results.     

Synthese sowie Kristall- und Molekülstruktur von Tetrafluoro[2-(pyrrolidinio)ethyl]silicat

Synthesis and Crystal and Molecular Structure of Tetrafluoro[2-(pyrrolidinio)ethyl]silicate The zwitterionic tetrafluoro[2-(pyrrolidinio)ethyl]silicate ( 4 ) was synthesized by reaction of trimethoxy(2-pyrrolidinoethyl)silane ( 5 ) with hydrogen fluoride in ethanol/hydrofluoric acid at 0°C. The crystal and molecular structure of 4 was studied at ?100°C by single-crystal X-ray diffraction. In addition, 4 was characterized by solution-state NMR studies (CD₃CN: ¹H, ¹³C).     

Reaction of13N produced by recoil deuterons in pile-irradiated acetic acid-d4 and malonic acid-d4

The reaction of¹³N to form¹³N-labelled compounds was studied in acetic acid-d₄ as a function of the halogenoacetic acid concentration and in malonic acid-d₄ as a function of the intermolecular distance of target malonic acid-d₄ at 195 and 295±6 K. In both deuterated carboxylic acids,¹³N atoms were found in several forms in the order of radiochemical yields,¹³NH₃>H¹³NO₃>[¹³N]aminoacid>HC¹³N. The yield of [¹³N]glycine formed in acetic acid-d₄ were markedly enhanced by iodoacetic acid and slightly by chloroacetic acid. In malonic acid-d₄, the yield of¹³NH₃ was directly proportional to the cubic root of the molar ratio, {D₂O/CD₂ (COOD)₂}, while the yields of H¹³N₃, [¹³N]aminomalonic acid and HC¹³N were inversely proportional to the cubic root of the molar ratio. The mechanism of the formation of the¹³N-compounds are discussed.     

Chains of fused rings in the hydrogen‐bonded structure of meso‐­6,13‐di­amino‐6,13‐di­methyl‐1,4,8,11‐tetra­aza­cyclo­tetra­decane–2,2′‐biphenol (1/2)

The title compound is a salt, [C₁₂H₃₂N₆]²⁺·2[HOC₆H₄C₆H₄O]^?. The centrosymmetric cation contains two intramolecular N—H?N hydrogen bonds with an N?N distance of 2.8290 (13) Å, and the pendent amino groups are in axial sites; the anion contains an intramolecular O—H?O hydrogen bond with an O?O distance of 2.4656 (11) Å. The ions are linked into continuous chains by means of four types of N—H?O hydrogen bonds with N?O distances ranging from 2.7238 (12) Å to 3.3091 (13) Å, associated with N—H?O angles in the range 148–160°.     

3‐[(Diphenylphosphinothioyl)oxy]‐N‐methylpropan‐1‐aminium diphenylphosphanylthioate

The title salt, C₁₆H₂₁NOPS⁺·C₁₂H₁₀OPS, was synthesized from the reaction between 3‐(methylamino)propan‐1‐ol and PPh₂(S)Cl in the presence of Et₃N. Its structure has been identified using spectroscopic methods and X‐ray analysis. Single crystals were obtained from ethanol by slow evaporation. In the asymmetric unit, a cation–anion pair is formed through an intermolecular N—H...O [N...O = 2.6974 (18) Å] hydrogen bond. The molecules are packed through N—H...O and N—H...S hydrogen bonds in the crystal and these hydrogen bonds are responsible for the high melting point. The P atoms of the anion and cation both have distorted tetrahedral environments.     

Chemical behaviour and steam transport of nitrogen-13 in BWR primary system

The chemical forms of the¹³N activity in the BWR primary coolant have been determined in four reactors during hydrogen water chemistry tests. Under normal water chemistry conditions, most of the¹³N activity was found in the forms of NO ₂ ^– and NO ₃ ^– in reactor water, and NO ₂ ^– was also found in the steam condensate where the majority of the activity was in NH ₄ ⁺ . On the other hand, under HWC conditions, practically all¹³N activity in both the reactor water and steam condensate was in the NH ₄ ⁺ form. The steam transport of the¹³N activity was significantly enhanced by the addition of hydrogen in the reactor water.     

Three new quinuclidine‐based structures: second harmonic generation response for 1,2‐bis(1‐azoniabicyclo[2.2.2]octan‐3‐ylidene)hydrazine dichloride

The crystal structures of three quinuclidine‐based compounds, namely (1‐azabicyclo[2.2.2]octan‐3‐ylidene)hydrazine monohydrate, C₇H₁₃N₃·H₂O ( 1 ), 1,2‐bis(1‐azabicyclo[2.2.2]octan‐3‐ylidene)hydrazine, C₁₄H₂₂N₄ ( 2 ), and 1,2‐bis(1‐azoniabicyclo[2.2.2]octan‐3‐ylidene)hydrazine dichloride, C₁₄H₂₄N₄²⁺·2Cl^? ( 3 ), are reported. In the crystal structure of 1 , the quinuclidine‐substituted hydrazine and water molecules are linked through N—H…O and O—H…N hydrogen bonds, forming a two‐dimensional array. The compound crystallizes in the centrosymmetric space group P2₁/c. Compound 2 was refined in the space group Pccn and exhibits no hydrogen bonding. However, its hydrochloride form 3 crystallizes in the noncentrosymmetric space group Pc. It shows a three‐dimensional network structure via intermolecular hydrogen bonding (N—H…C and N/C—H…Cl). Compound 3 , with its acentric structure, shows strong second harmonic activity.     

Syntheses,Structural, and Spectroscopic Properties of Copper(II) Complexes of Constrained Macrocyclic Ligands

The complexes [Cu(L¹)(H₂O)₂](BF₄)₂ · 2H₂O ( 1 ) [L¹ = 5, 16‐dimethyl‐2, 6, 13, 17‐tetraazatricyclo(14, 4, 0^1.18,0^7.12)docosane] and 0.5[Cu(L²)(NO₃)₂][Cu(L²)](NO₃)₂ ( 2 ) [L² = dibenzyl‐5, 16‐dimethyl‐2, 6, 13, 17‐tetraazatricyclo(14, 4, 0^1.18,0^7.12)docosane] were synthesized and characterized by single crystal X‐ray analyses. In these constrained macrocycles, the central copper(II) atoms are in a tetragonally distorted octahedral environment with four nitrogen atoms of the macrocyclic ligands in equatorial positions and oxygen atoms from either water molecules or nitrato groups in axial positions. The macrocyclic ligands in both complexes adopt the most stable trans‐III conformation. The Cu–N distances [1.999(7)–2.095(7) Å] are typical for such complexes, but the axial ligands are weakly coordinating Cu–OH₂ bonds [2.693(3) Å] and Cu–ONO₂ bonds [2.873(7) Å] due to the combination of the pseudo Jahn–Teller effect and strong in‐plane ligand field. The crystals are stabilized by a three‐dimensional network by hydrogen bonds that are formed among the secondary nitrogen hydrogen atoms, oxygen atoms of water molecules, fluorine atoms of BF₄^–, and oxygen atoms of NO₃^–. The electronic absorption and IR spectroscopic properties are also discussed.     

<Emphasis Type="Italic">In situ</Emphasis> IR Spectroscopic and XPS Study of Surface Complexes and Their Transformations during Ammonia Oxidation to Nitrous Oxide over an Mn-Bi-O/α-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> Catalyst

Surface complexes resulting from the interaction between ammonia and a manganese-bismuth oxide catalyst were studied by IR spectroscopy and XPS. At the first stage, ammonia reacts with the catalyst to form the surface complexes [NH] and [NH₂] via abstraction of hydrogen atoms even at room temperature. Bringing the catalyst into contact with flowing air at room temperature or with helium under heating results in further hydrogen abstraction and simultaneous formation of [N] from [NH₂] and [NH]. The nitrogen atoms are localized on both reduced (Mn²⁺) and oxidized (Mn^δ+, 2 < δ < 3) sites. Atomic nitrogen is highly mobile and reacts readily with the weakly bound oxygen of the oxidized (Mn^δ+-N) active site. The nitrogen atoms localized on oxidized sites play the key role in N₂O formation. Nitrous oxide is readily formed through the interaction between two Mn^δ+-N species. N₂ molecules result from the recombination of nitrogen atoms localized on reduced (Mn²⁺-N) sites.__________Translated from Kinetika i Kataliz, Vol. 46, No. 4, 2005, pp. 590–600.Original Russian Text Copyright © 2005 by Slavinskaya, Chesalov, Boronin, Polukhina, Noskov.     

Visible Light Photocatalytic Activity of Pt/N‐TiO2 towards Enhanced H2 Production from Water Splitting

Present work mainly focuses on experimental investigation to improvement of hydrogen production by water photoelectrolysis. An experimental facility was designed and constructed for visible light photocatalysis. A series of N‐TiO₂ photocatalysts impregnated with platinum on the surface of N‐TiO₂ were prepared. Hydrogen production upon irradiating aqueous Pt/N‐TiO₂ suspension with visible light was investigated. The shift in excitation wavelength of TiO₂ was 380 nm improved the yield of hydrogen production by N‐TiO₂ and Pt/N‐TiO₂. We used a 400 W mercury arc lamp combined with a 400 nm cutoff filter eliminating all the wavelengths under 400 nm. Pt/N‐TiO₂ material was characterized with TPR, reflective UV/Visible spectroscopy and TEM. The best hydrogen production rate obtained for this setup for N/Ti = 10, 0.05 wt% Pt/N‐TiO₂, through water splitting was about 772 μmolh^?1g^?1.     

Yield ratio of [11C]-CO2, [11C]-CO and [11C]-CH4 from the irradiation of N2/H2-mixtures in a gas target

The¹⁴N/p, /¹¹C-reaction was studied in different N₂/H₂-mixtures. The products are [¹¹C]-CO₂, [¹¹C]-CO and [¹¹C]-CH₄. The yield ratio may be controlled by varying the bombardment conditions. High pressure, high H₂-content, high beam current and high proton energy shift the ratio towards [¹¹C]-CH₄. Lower beam current and lower proton energy increase the yield of [¹¹C]-CO₂. The production of [¹¹C]-CO is constant over a wide range of conditions /about 10%/. For the production of [¹¹C]-CH₄ in good yield a target gas holder for high pressures has been developed. Details are given in Fig. 7. This target gas holder was filled with 5% H₂ in N₂ at 3×10⁶ Pa. Proton irradiation of the mixture gives a typical yield of [¹¹C]-CH₄ of 400–500 mCi at a beam current of 15–20 A within 20 min. Only traces of other¹¹C-labelled compounds could be detected under these conditions.     

Transition metal ion complexes of thiosemicarbazones derived from 2-acetylpyridine. Part 5. The4 N-cyclohexyl derivative

Summary Metal ion complexes of the thiosemicarbazone,⁴ N-cyclohexyl-2-[1-(2-pyridinyl)ethylidene]hydrazinecarbothioamide (HL4CH), have been prepared and spectrally characterised. Both the size of the cyclohexyl-group attached at⁴N as well as the⁴N hydrogen affect the stoichiometry and stereochemistry of the isolated complexes. The large cyclohexyl-group evidently causes the isolation of [Fe(HL4CH) (L4CH)H₂O](ClO₄) instead of the expected [Fe(L4CH)₂]ClO₄[Co(L4CH)Br] instead of [Co(HL4CH)Br₂], and [Ni(L4CH)Br] instead of [Ni(HL4CH)₂Br₂]. The presence of the hydrogen at⁴N presumably hinders the deprotonation of HL4CH on complex formation since [Cu(HL4CH)Cl₂] was isolated rather than [CuLCl], which occurs when the thiosemicarbazone has⁴N with two alkyl groups or incorporated in a ring. Further, although we prepared [Ni(L4CH)Br], complexes of this stoichiometry are planar and diamagnetle when⁴N does not have a hydrogen(s) attached to it rather than tetrahedral and paramagnetic as has been found for the present complex.     

Pseudopolyrotaxanes of Cucurbit[6]uril: A Three‐Dimensional Network Self‐assembled by ClO4−(H2O)2 Water Clusters

A pseudorotaxane of cucurbit[6]uril (CB[6]) with guest molecule N,N′‐hexamethylenebis (pyrazinyl perchlorate) (BPHP) was synthesized and characterized by ¹H NMR spectra, IR, single crystal X‐ray diffraction analysis and thermogravimetric analysis. The structure of the pseudorotaxane (CB[6]·BPHP) is stabilized by host‐guest hydrogen bonds. Self‐assembly of the pseudorotaxane produces infinite one‐dimensional and two‐dimensional networks with intermolecular hydrogen bonds. In the molecular packing of the CB[6]·BPHP, ClO₄^?(H₂O)₂ water clusters serve as bridges to associate these pseudorotaxanes and form three‐dimensional networked pseudopolyrotaxane.     

Estimation of peptide N–Cα bond cleavage efficiency during MALDI‐ISD using a cyclic peptide

Matrix‐assisted laser desorption/ionization in‐source decay (MALDI‐ISD) induces N–C_α bond cleavage via hydrogen transfer from the matrix to the peptide backbone, which produces a c′/z? fragment pair. Subsequently, the z? generates z′ and [z + matrix] fragments via further radical reactions because of the low stability of the z?. In the present study, we investigated MALDI‐ISD of a cyclic peptide. The N–C_α bond cleavage in the cyclic peptide by MALDI‐ISD produced the hydrogen‐abundant peptide radical [M + 2H]⁺? with a radical site on the α‐carbon atom, which then reacted with the matrix to give [M + 3H]⁺ and [M + H + matrix]⁺. For 1,5‐diaminonaphthalene (1,5‐DAN) adducts with z fragments, post‐source decay of [M + H + 1,5‐DAN]⁺ generated from the cyclic peptide showed predominant loss of an amino acid with 1,5‐DAN. Additionally, MALDI‐ISD with Fourier transform‐ion cyclotron resonance mass spectrometry allowed for the detection of both [M + 3H]⁺ and [M + H]⁺ with two ¹³C atoms. These results strongly suggested that [M + 3H]⁺ and [M + H + 1,5‐DAN]⁺ were formed by N–C_α bond cleavage with further radical reactions. As a consequence, the cleavage efficiency of the N–C_α bond during MALDI‐ISD could be estimated by the ratio of the intensity of [M + H]⁺ and [M + 3H]⁺ in the Fourier transform‐ion cyclotron resonance spectrum. Because the reduction efficiency of a matrix for the cyclic peptide cyclo(Arg‐Gly‐Asp‐D‐Phe‐Val) was correlated to its tendency to cleave the N–C_α bond in linear peptides, the present method could allow the evaluation of the efficiency of N–C_α bond cleavage for MALDI matrix development. Copyright © 2016 John Wiley & Sons, Ltd.     

Polar hydrogen‐bonded organic chains in 4,4′‐bipyrazolium bromide and perchlorate monohydrates

4,4′‐Bipyrazolium [or 4‐(1H‐pyrazol‐4‐yl)pyrazolium] bromide monohydrate, C₆H₇N₄⁺·Br⁻·H₂O, and 4,4′‐bipyrazolium perchlorate monohydrate, C₆H₇N₄⁺·ClO₄⁻·H₂O, have closely related layered structures involving tight stacks of antiparallel N—H⋯N hydrogen‐bonded polar bipyrazolium chains [N⋯N = 2.712 (3) and 2.742 (2) Å], which are crosslinked by hydrogen bonds with water mol­ecules and counter‐anions.     

A three‐dimensional framework in 2,2′‐biimidazolium bis(2,2′‐biimidazole‐κ2N,N′)bis(biphenyl‐2,4′‐dicarboxylato‐κO)manganese(II) hexahydrate

In the title salt, (C₆H₈N₄)[Mn(C₁₄H₈O₄)₂(C₆H₆N₄)₂]·6H₂O, the Mn^II atom lies on an inversion centre and is coordinated by four N atoms from two 2,2′‐biimidazole (biim) ligands and two O atoms from two biphenyl‐2,4′‐dicarboxylate (bpdc) anions to give a slightly distorted octahedral coordination, while the cation lies about another inversion centre. Adjacent [Mn(bpdc)₂(biim)₂]²⁻ anions are linked via two pairs of N—H...O hydrogen bonds, leading to an infinite chain along the [100] direction. The protonated [H₂biim]²⁺ moiety acts as a charge‐compensating cation and space‐filling structural subunit. It bridges two [Mn(bpdc)₂(biim)₂]²⁻ anions through two pairs of N—H...O hydrogen bonds, constructing two R₂²(9) rings, leading to a zigzag chain in the [2] direction, which gives rise to a ruffled set of [H₂biim]²⁺[Mn(bpdc)₂(biim)₂]²⁻ moieties in the [01] plane. The water molecules give rise to a chain structure in which O—H...O hydrogen bonds generate a chain of alternating four‐ and six‐membered water–oxygen R₄²(8) and R₆⁶(12) rings, each lying about independent inversion centres giving rise to a chain along the [100] direction. Within the water chain, the (H₂O)₆ water rings are hydrogen bonded to two O atoms from two [Mn(bpdc)₂(biim)₂]²⁻ anions, giving rise to a three‐dimensional framework.     

Aqua[bis(pyrimidin‐2‐yl‐κN)amine](carbonato‐κ2O,O′)copper(II) dihydrate

The title mononuclear complex, [Cu(CO₃)(C₈H₇N₅)(H₂O)]·2H₂O, was obtained by fixation of CO₂ by a mixture of copper(II) tetra­fluoro­borate and the ligand bis­(pyrimidin‐2‐yl)­amine in ethanol/water. The Cu^II ion of the complex has a distorted square‐pyramidal environment, with a basal plane formed by two N atoms of the ligand and two chelating O atoms of the carbonate group, while the apical position is occupied by the O atom of the coordinating water mol­ecule. In the solid state, hydrogen‐bonding interactions are dominant, the most unusual being the Watson–Crick‐type coplanar ligand pairing through two N—H?N bonds. Lattice water mol­ecules also participate in hydrogen bonding.