Determination of trace metals by anodic stripping voltammetry using a bismuth-modified carbon nanotube electrode

A bismuth-modified carbon nanotube electrode (Bi-CNT electrode) was employed for the determination of trace lead, cadmium and zinc. Bismuth film was prepared by in situ plating of bismuth onto the screen-printed CNT electrode. Operational parameters such as preconcentration potential, bismuth concentration, preconcentration time and rotation speed during preconcentration were optimized for the purpose of determining trace metals in 0.1M acetate buffer solution (pH 4.5). The simultaneous determination of lead, cadmium and zinc was performed by square wave anodic stripping voltammetry. The Bi-CNT electrode presented well-defined, reproducible and sharp stripping signals. The peak current response increased linearly with the metal concentration in a range of 2-100 microg/L. The limit of detection was 1.3 microg/L for lead, 0.7 microg/L for cadmium and 12 microg/L for zinc (S/N=3). The Bi-CNT electrode was successfully applicable to analysis of trace metals in real environments.     

螯合树脂在线富集火焰原子吸收法测定痕量铅和镉

在pH=4.88的乙酸-乙酸钠缓冲溶液中,用螯合离子交换树脂富集铅和镉,以1.50mol/L HNO3作洗脱液,火焰原子吸收法测定洗脱液中痕量铅和镉。该方法对铅和镉的线性范围分别是4.0～80.0μg/L和2.0～30.0μg/L,检出限分别为1.3μg/L和0.7μg/L。该方法用于地表水中痕量铅和镉的测定,分析结果满意。     

Preconcentration and quantification of copper,lead, and cadmium using anion exchangers modified with azo compounds

The sorption of azo compounds on anion exchangers of different basicity is studied; the physicochemical and analytical properties of the modified adsorbents are studied. For the prepared modified adsorbents, the conditions of the preconcentration and elution of copper, lead, and cadmium are determined. The analytical potency of the adsorbent Amberlite-Zincon for the group preconcentration and isolation of copper, lead, and cadmium from solutions of complex composition is demonstrated. An efficient combination procedure for the determination of copper, lead, and cadmium in geothermal waters are developed.     

Triazine-modified magnetite nanoparticles as a novel sorbent for preconcentration of lead and cadmium ions

We report on a new sorbent for preconcentration of cadmium and lead ions that is based on triazine-functionalized magnetite nanoparticles that were prepared by direct silylation of magnetic nanoparticles with 3-aminopropyltriethoxysilane-2,4-bis(3,5-dimethylpyrazol)-triazine. The sorbent was characterized by IR spectroscopy, X-ray powder diffraction, scanning electron microscopy, thermal and elemental analysis. The sorbent was applied to the preconcentration of lead and cadmium ions which then were quantified by FAAS. The effects of sample pH value, extraction time, of type, concentration and volume of eluent, and of elution time were optimized. The limits of detection are 0.7 ng mL⁻¹ for Pb(II) ion and 0.01 ng mL⁻¹ for Cd(II). The effects of potentially interfering ions often found in real samples on the recovery in the determination of cadmium and lead ions in real samples were also investigated. The accuracy of the method was confirmed by analyzing the certified reference materials NIST 1571 (orchard leaves) and NIST 1572 (citrus leaves). Finally, the method was successfully applied to the determination of cadmium and lead ions in some fruit samples.

We report on a new sorbent for preconcentration of cadmium and lead ions that is based on triazine-functionalized magnetite nanoparticles. After optimization of the preconcentration step the method was successfully applied to the determination of cadmium and lead ions in some fruit samples

     

Application of a poly(dithiocarbamate) resin with macroreticular support to the determination of trace amounts of cadmium and lead in non-saline waters.

The chelating poly(dithiocarbamate) resin with macroreticular support is shown to be effective for the preconcentration of cadmium and lead from non-saline waters. The retained ions can be eluted efficiently in 5 ml of 8 mol dm-3 nitric acid from 1-20 cm columns of resin. Poly(dithiocarbamate) resin is used for preconcentration in the determination of cadmium and lead by flame atomic absorption spectrometry. The common ions present in non-saline waters do not interfere. The sensitivity was 0.10 micrograms l-1 of Cd and 0.73 micrograms l-1 of Pb. The detection limits were 0.03 and 0.34 micrograms l-1 for Cd and Pb, respectively. The cadmium and lead concentration rages, determined in mineral and tap waters, were between 0.1 and 0.8 micrograms l-1 and between 0.7 and 16.9 micrograms l-1, respectively.     

Coupling continuous ultrasound-assisted extraction, preconcentration and flame atomic absorption spectrometric detection for the determination of cadmium and lead in mussel samples

Continuous ultrasound-assisted extraction has been coupled with preconcentration and flame atomic absorption spectrometry for the determination of cadmium and lead in mussel samples. Experimental designs were used for the optimisation of the leaching and preconcentration steps. The use of diluted nitric acid as extractant in the continuous mode at a flow rate of 3.5 ml min⁻¹ and room temperature was sufficient for quantitative extraction of these trace metals. A minicolumn containing a chelating resin (Chelite P, with aminomethylphosphoric acid groups) was proved as an excellent material for the quantitative preconcentration of cadmium and lead prior to their flame atomic absorption detection. A flow injection manifold was used as interface for coupling the three analytical steps, which allowed the automation of the whole analytical process. A good precision of the whole procedure (2.0 and 2.3%), high enrichment factors (20.5 and 11.8) and a detection limit of 0.011 and 0.25 μg g⁻¹ for cadmium and lead, respectively, were obtained for 80 mg of sample. The sample throughputs were ca. 16 and 14 samples h⁻¹ for cadmium and lead, respectively. The accuracy of the analytical procedures was verified by using a standard reference material (BCR 278-R, mussel tissue) and the results were in good agreement with the certified values. The method was successfully applied to the determination of trace amounts of cadmium and lead in mussel samples from the coast of Galicia (NW, Spain).     

Electrothermal atomic absorption spectrometric determination of cadmium in environmental samples with niobium wire preconcentration method

A preconcentration method by adsorption of cadmium on a niobium wire was developed for the environmental waters, followed by electrothermal atomic absorption spectrometry with a tungsten tube atomizer. After the preconcentration, the niobium wire was directly inserted into the tungsten tube atomizer. In the preconcentration (adsorption) process of cadmium, the optimal immersing time was 60?s. The effects of large amounts of concomitants on the preconcentration of cadmium were evaluated. When 10³–10⁴ fold excess of matrix elements existed in aqueous solution at pH 4 and 9, the cadmium response was profoundly affected by the matrix elements. However, the cadmium absorption signal was not significantly influenced at pH 7. Therefore, pH 7 was selected for the application into the real environmental samples. Under the optimal conditions, the detection limit (3S/N) for cadmium by the niobium wire preconcentration method was 7.0?pg?mL^?1 and the relative standard deviation was 6.8%. The method with preconcentration on a niobium wire was applied to the determination of cadmium in water and proved to be sensitive, simple and convenient. Because this preconcentration method can be utilized in the in situ treatment of trace cadmium in environmental water samples, it was unnecessary to carry the water samples to the analytical work place. The technique was shown to be useful for the determination of cadmium in environmental water samples at 0.1–1?µg?L^?1 levels.     

Triazine-modified magnetite nanoparticles as a novel sorbent for preconcentration of lead and cadmium ions

We report on a new sorbent for preconcentration of cadmium and lead ions that is based on triazine-functionalized magnetite nanoparticles that were prepared by direct silylation of magnetic nanoparticles with 3-aminopropyltriethoxysilane-2,4-bis(3,5-dimethylpyrazol)-triazine. The sorbent was characterized by IR spectroscopy, X-ray powder diffraction, scanning electron microscopy, thermal and elemental analysis. The sorbent was applied to the preconcentration of lead and cadmium ions which then were quantified by FAAS. The effects of sample pH value, extraction time, of type, concentration and volume of eluent, and of elution time were optimized. The limits of detection are 0.7 ng mL^?1 for Pb(II) ion and 0.01 ng mL^?1 for Cd(II). The effects of potentially interfering ions often found in real samples on the recovery in the determination of cadmium and lead ions in real samples were also investigated. The accuracy of the method was confirmed by analyzing the certified reference materials NIST 1571 (orchard leaves) and NIST 1572 (citrus leaves). Finally, the method was successfully applied to the determination of cadmium and lead ions in some fruit samples. Figure

We report on a new sorbent for preconcentration of cadmium and lead ions that is based on triazine-functionalized magnetite nanoparticles. After optimization of the preconcentration step the method was successfully applied to the determination of cadmium and lead ions in some fruit samples     

Rapid coprecipitation-separation and flame atomic absorption spectrometric determination of lead and cadmium in water with cobalt (II) and ammonium pyrrolidine dithiocarbamate

A coprecipitation technique which does not require complete collection of the precipitate was proposed for the determination of trace lead and cadmium in water with flame atomic absorption spectrometry (FAAS) after preconcentration of lead and cadmium by using cobalt (II) and ammonium pyrrolidine dithiocarbamate (Co-APDC) as coprecipitant and known amount of cobalt as an internal standard. Since lead, cadmium and cobalt were well distributed in the homogeneous precipitate, the concentration ratio of lead to cobalt, and cadmium to cobalt remained unchanged in any part of the precipitate. The amount of lead and cadmium in the original sample solution can be calculated respectively from the ratio of the absorbance values of lead and cadmium to cobalt in the final sample solution that is measured by FAAS and the known amount of the lead and cadmium in the standard series solutions. The optimum pH range for quantitative coprecipitation of lead and cadmium is from 3.0 to 4.5. The 16 diverse ions tested gave no significant interferences in the lead and cadmium determination. Under optimised conditions, lead ranging from 0 to 40?µg and cadmium ranging from 0 to 8?µg were quantitatively coprecipitated with Co-APDC from 100?mL sample solution (pH?～?3.5). This coprecipitation technique coupled with FAAS was applied to the determination of lead and cadmium in water samples with satisfactory results (recoveries in the range of 94.0–108%, relative standard deviations <6.0%).     

Determination of trace impurities in some nickel compounds by flame atomic absorption spectrometry after solid phase extraction using Amberlite XAD-16 resin

A simple flame atomic absorption spectrometric (FAAS) procedure for the determination of lead, bismuth, gold, palladium and cadmium as impurities in Raney nickel and nickel oxide was developed using a preconcentration step on an Amberlite XAD-16 resin packed column. Lead, bismuth, gold, palladium and cadmium were quantitatively recovered and separated from a solution containing 1 M HCl and 0.3 M NaI by the column system. Effects of the various parameters such as reagent concentrations, sample volume, matrix effects, etc. have been investigated. Under optimized conditions, the relative standard deviation of the combined method of sample treatment, preconcentration and determination with FAAS (n = 7) is generally lower than 12%. The limit of detection (3s, n = 20) was between 10–270 ng/g. The results were used for separation and preconcentration of five trace elements from nickel matrices.     

Determination of cadmium and lead at μg/1 levels in aqueous matrices by chelation ion chromatography

A method for the simultaneous determination of μg/1 or sub-μg/1 levels of cadmium and lead in sea water by chelation ion chromatography is demonstrated. The method consists in the preconcentration of a sea-water sample containing cadmium and lead on an iminodiacetate chelating resin; alkali and alkaline earth metals are removed from the resin with an ammonium acetate buffer, the metals are eluted and separated by cation-exchange chromatography, followed by postcolumn derivatization with 4-(2-pyridylazo)resorcinol and spectrophotometric detection at 520 nm. The concentration and separation steps are automated. The detection limit, when concentrating 200 ml of sea water, was found to be 2 ng for cadmium and 6 ng for lead. Relative standard deviations of 4.5% and 6.8% for 10 μg/1 of cadmium and lead, respectively, were obtained. Transition metals (Fe, Co, Ni, Zn, Cu, Mn) do not interfere in the analysis. An application of the method to the determination of cadmium and lead in sea-water samples collected in the Taranto gulf (Italy) is presented.     

The Simultaneous Determination of Cu Pb Cd and Sb by Derivative Adsorption Chronopotentiometry

The behaviour of the complexes of copper,lead,cadmium and antimony with salicylfluorone(SAF)adsorbed on HMDE has been investigated by derivative chrono potentiometry in NH3/NH4C1.The dependence of the peak height on the dt/dE vs E curve on preconcentration time,the pH of solution and the constant reducing current are discussed.This method achieved the simultaneous determination of copper,lead,cadmium and antimony in human hair.     

The Simultaneous Determination of Cu Ph Cd and Sb by Derivative Adsorption Chronopotentiometry

Anodic stripping voltammetry (ASV) is an effective electroanalytical technique for themeasurement of trace metal ions. But there are serious interferences due to overlappingstripping peaks and forming of intermetallic complex in complicated system. The peak ofcopper (ASV) is close to that of mercury. So the result of determination of copper is notsatisfactory. Adsorption chronopotentiometry was reported by H.Eskilsson et al i. In thismethod, instead of electrolytic accumulation of metal io…     

Synthesis of magnetically modified mesoporous nanoparticles and their application in simultaneous determination of Pb(II), Cd(II) and Cu(II)

In this study, a novel adsorbent from a mesoporous family (MCM-41) coating with CoFe₂O₄ and piperazine was synthesized by a simple and easy route. Its application for simultaneous preconcentration of three heavy metals including lead, cadmium and copper in real samples followed by a flame atomic absorption spectroscopy was investigated. The central composite design was employed for investigating the most effective factors of pH, amount of adsorbent, the equilibrium time and their interactions. Under the optimum conditions, the detection limits for lead, cadmium and copper were 0.50, 0.30 and 0.25 μg L^?1, respectively, and the preconcentration factor (PF) was 33. The presented method was successfully employed for the simultaneous determination of the three mentioned heavy metals in real samples with recoveries of 90%–105%. The accuracy of the suggested methods was also investigated through spiking samples and a reasonable range for recoveries from 90.3% to 107% was acquired. The isotherm models and thermodynamic parameters have also been studied. The new adsorbent showed fast adsorption kinetics within 10 min and maximum Langmuir monolayer capacities of 238.09, 178.57 and 208.33 mg g^?1 for lead, cadmium and copper, respectively.     

A new method of microvolume back-extraction procedure for enrichment of Pb and Cd and determination by flame atomic absorption spectrometry

The need for highly reliable methods for the determination of trace elements has been recognised in analytical chemistry and environmental science. A method for the trace analysis of Pb and Cd in natural waters is described. In a preconcentration step, 500 ml of an aqueous sample containing lead and cadmium were extracted into 3.5 ml of a solution containing a complexing agent (dithizone) in xylene. Subsequently, the dithizonate complexes were back-extracted into 600 mul of nitric acid solution for direct determination by flame atomic absorption spectrometry. Important microextraction parameters were optimised using spiked deionised water. The 3sigma detection limits, relative standard deviations and linear calibration graphs were, respectively, 0.39 mugl(-1), 6.3% and 1.0-20.0 mugl(-1) for lead and 8.2 ngl(-1), 4.0% and 0.05-1.0 mugl(-1) for cadmium for solvent microextraction times of 4 min and microvolume back-extraction times of 1 min. The preconcentration factors were 543- and 331-fold for lead and cadmium, respectively.     

Activated carbon cloth filled pipette tip for solid phase extraction of nickel(II), lead(II), cadmium(II), copper(II) and cobalt(II) as 1,3,4-thiadiazole-2,5-dithiol chelates for ultra-trace detection by FAAS

A solid phase extraction method is established for preconcentration of nickel, lead, cadmium, copper and cobalt using pipette tip solid phase extraction. The presented process was dependent on chelation of analytes with 1,3,4-thiadiazole-2,5-dithiol, then allowing the solution to flow through an activated carbon cloth packed pipette tip. The adsorbed metal chelates on the surface of activated carbon cloth were eluted by 5 mL of 3 M HNO₃. The concentrations of nickel, lead, cadmium, copper and cobalt were detected using a flame atomic absorption spectrometer (FAAS). The pipette tip solid phase extraction exhibit a preconcentration factor of 120. The limit of detection values were 2.7, 1.7, 1.3, 2.0 and 2.9 µg L^?1 for Ni(II), Pb(II), Cd(II), Cu(II) and Co(II), respectively. Validation of the method was checked by the analysis of TMDA-53.3 and TMDA-64.2 certified reference materials. The method was successfully applied for water and fertiliser samples.     

Trace Metal Preconcentration Using A Thioglycolate Chelating Resin

Abstract

A styrene-divinyl benzene copolymer resin (Amberlite XAD-4), modified with thioglycolate complexing groups, has been employed for the preconcentration of cadmium, zinc, lead and nickel fron natural waters. the resin exhibits its strongest affinity for cadmium and lead but can be used to quantitatively remove all four metals from non-saline waters. With seawater samples, the resin is best only employed for the enrichment of cadmium and lead as the recovery of nickel and zinc from this medium is poor.     

Determination of Cadmium and Lead in Human Teeth Samples Using Dispersive Liquid‐liquid Microextraction and Graphite Furnace Atomic Absorption Spectrometry

A new method for the determination of cadmium and lead in human teeth was developed based on dispersive liquid‐liquid microextraction preconcentration and graphite furnace atomic absorption spectrometry determination. In the proposed approach, O,O‐diethyldithiophosphate (DDTP) was used as a chelating agent, and carbon tetrachloride and methanol were selected as extraction and dispersive solvents. Some factors influencing the extraction efficiency of cadmium and lead and their subsequent determination, including extraction and dispersive solvent type and volume, pH of sample solution, concentration of the chelating agent and extraction time, were studied and optimized. Under the optimum conditions, the enrichment factor of 116 and 68 for cadmium and lead were achieved. The detection limit for cadmium and lead was 5.6 and 45 ng L^?1, and the relative standard deviation (R.S.D) was 4.5% and 3.8% (n = 7, c = 1.0 ng mL^?1), respectively. Verification of the accuracy of the method was carried out by analysis of a standard reference material (NIST 1486, bone meal). The method was successfully applied to the determination of trace amount of cadmium and lead in human teeth samples with satisfactory results.     

Natural analcime zeolite modified with 5-Br-PADAP for the preconcentration and anodic stripping voltammetric determination of trace amount of cadmium.

A procedure for separation and preconcentration of trace amounts of cadmium has been proposed. A column of analcime zeolite modified with benzyldimethyltetradecylammonium chloride and loaded with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (5-Br-PADAP) was used for retention of cadmium. The cadmium was quantitatively retained on the column at pH approximately 9 and was recovered from column with 5 ml of 2 M nitric acid with a preconcentration factor of 140. Anodic stripping differential pulse voltammetry was used for determination of cadmium. A 0.05 ng/ml detection limit for the preconcentration of aqueous solution of cadmium was obtained. The relative standard deviation (RSD) for eight replicate determinations at the 1 microg/ml cadmium levels was 0.31% (calculated with the peak height obtained). The calibration graph using the preconcentration system was linear from 0.01 to 150 microg/ml in final solution with a correlation coefficient of 0.9997. For optimization of conditions, various parameters such as the effect of pH, flow rate, instrumental conditions and interference of number of ions, were studied in detail. This method was successfully applied for determination of cadmium in various complex samples.     

Determinations of Some Trace Metals in Dialysis Solutions by Atomic Absorption Spectrometry After Preconcentration

Abstract

A method is presented for the determination of copper, lead, iron, cadmium, cobalt and nickel in dialysis solution at μg/1 level by atomic absorption spectrometry after preconcentration. The preconcentration is based on chelate formation of the investigated metals with ammonium pyrrolydine dithiocarbamate and on retention of the chelates on Amberlite XAD-4 in a short column. The relative standard deviations for the determinations were found to be lower than 0.08.