The weakly bound He-HCCCN complex: high-resolution microwave spectra and intermolecular potential-energy surface

Rotational spectra of the weakly bound He-HCCCN and He-DCCCN van der Waals complexes were observed using a pulsed-nozzle Fourier-transform microwave spectrometer in the 7-26-GHz frequency region. Nuclear quadrupole hyperfine structures due to the 14N and D nuclei (both with nuclear-spin quantum number I = 1) were resolved and assigned. Both strong a and weaker b-type transitions were observed and the assigned transitions were used to fit the parameters of a distortable asymmetric rotor model. The dimers are floppy, near T-shaped complexes. Three intermolecular potential-energy surfaces were calculated using the coupled-cluster method with single and double excitations and noniterative inclusion of triple excitations. Bound-state rotational energy levels supported by these surfaces were determined. The quality of the potential-energy surfaces was assessed by comparing the experimental and calculated transition frequencies and also the corresponding spectroscopic parameters. Simple scaling of the surfaces improved both the transition frequencies and spectroscopic constants. Five other recently reported surfaces [O. Akin-Ojo, R. Bukowski, and K. Szalewicz, J. Chem. Phys. 119, 8379 (2003)], calculated using a variety of methods, and their agreement with spectroscopic properties of He-HCCCN are discussed.     

Ab initio potential-energy surface and rovibrational states of the HCN-HCl complex

A four-dimensional intermolecular potential-energy surface has been calculated for the HCN-HCl complex, with the use of the coupled cluster method with single and double excitations and noniterative inclusion of triples. Data for more than 13,000 geometries were represented by an angular expansion in terms of coupled spherical harmonics; the dependence of the expansion coefficients on the intermolecular distance R was described by the reproducing kernel Hilbert space method. The global minimum with De=1565 cm(-1) and Re=7.47a0 has a linear HCN-HCl hydrogen-bonded structure with HCl as the donor. A secondary hydrogen-bonded equilibrium structure with De=564 cm(-1) and Re=8.21a0 has a T-shaped geometry with HCN as the donor and the acceptor HCl molecule nearly perpendicular to the intermolecular axis. This potential surface was used in a variational approach to compute a series of bound states of the isotopomers HCN-H35Cl, DCN-H35Cl, and HCN-H37Cl for total angular momentum J=0,1,2 and spectroscopic parities e, f. The results could be analyzed in terms of the approximate quantum numbers of a linear polyatomic molecule with two coupled bend modes, plus a quantum number for the intermolecular stretch vibration. They are in good agreement with the recent high resolution spectrum of Larsen et al. [Phys. Chem. Chem. Phys. 7, 1953 (2005)] in the region of 330 cm(-1) corresponding to the HCl libration. The (partly anomalous) effects of isotopic substitutions on the properties of the complex were explained with the aid of the calculations.     

Ab initio intermolecular potential energy surface, bound states, and microwave spectra for the van der Waals complex Ne-HCCCN

We report two ab initio intermolecular potential energy surfaces for Ne-HCCCN using a supermolecular method. The calculations were performed at the fourth-order M?ller-Plesset (MP4) and the coupled cluster singles-and-doubles with noniterative inclusion of connected triples [CCSD(T)] levels with the full counterpoise correction for the basis set superposition error and a large basis set including bond functions. The complex was found to have a planar T-shaped structure minimum and a linear minimum with the Ne atom facing the H atom. The two-dimensional discrete variable representation method was employed to calculate the rovibrational bound states. In addition, the microwave spectra including intensities for the ground vibrational state were predicted. The results show that the spectrum is dominated by b-type (DeltaK(a) = +/-1) transitions with very weak a-type (DeltaK(a) = 0) transitions. The calculated results at the CCSD(T) potential are in good agreement with those at MP4 potential.     

Three-dimensional ab initio potential-energy surface and rovibrational spectra of the H2-Kr complex

We report a three-dimensional ab initio potential-energy surface for the H2-Kr complex calculated using a supermolecular method. The electronic calculations were performed at the coupled-cluster singles and doubles level with noniterative inclusion of connected triples levels with a large basis set including midbond functions and the full counterpoise correction for the basis-set superposition error. The intermolecular potential energy between the H2 molecule and the Kr atom were evaluated at five potential-optimized discrete variable representation (DVR) grid points generated from the potential-energy curve of H2. The potential for other bond lengths of H2 could be deduced using polynomial interpolations. The complex is found to have a linear preferred structure with a rather flat energy barrier. The three-dimensional DVR method and the Lanczos propagation algorithm were employed to calculate the rovibrational states without separating the inter- and intramolecular nuclear motions. In addition, the rovibrational spectra from the H2 fundamental vibrational band were calculated. The calculated shift for the band origin is -1.50 cm-1, which is in good agreement with the experimental value of -1.706 cm-1, and the calculated transition frequencies in Q1(0) and S1(0) bands are within 3% of the observed values.     

Ab initio intermolecular potential energy surface of He-LiH

The intermolecular potential energy surface of He-LiH complex was studied using the full-electronic complete forth-order Miller-Plesset perturbation (MPPT) method.In ab initio calculations,the bond length of LiH was fixed at 0 159 5 nm.The potential has two local minima of Vm=-179.93 cm for the linear He LiH geormetrv at Rm=0.227 nm and Vm=-10.44 cm-1 for the linear He-HL1 geometry at Rm=0.516 nm The potemal exhibits strong anisotropy The analytic potential function with 31 parameters was determined by fitting to the calculated ab,mtio potentials The influence of variation of LiH bond length on the potential energy surface was also studied     

Ab initio potential energy surface and intermolecular vibrations of the naphthalene-argon van der Waals complex

The intermolecular potential energy surface (PES) of the naphthalene-argon (NpAr) complex is constructed using an ab initio method. The molecule-argon interaction energy is computed at the level of the second-order M?ller-Plesset (MP2) theory combined with the augmented correlation consistent polarized valence double-ζ basis set. The analytical PES fitted to a large set of single energy values is further improved with the help of correction functions determined by calculations of the interaction energy at the coupled cluster level including single and double excitations supplemented by triple excitations performed for a limited set of intermolecular configurations. The PES determined is very flat near its four equivalent global minima of -493 cm(-1) located from both sides of the Np plane at a distance of 3.435 A? and shifted from the center of Np by ±0.43 A? along its long symmetry axis. The large-amplitude motion of Ar in the complex is investigated, and dynamical consequence of a strong intermode coupling is discovered in the excited vibrational states. The theoretical results obtained allow for the reassignment of the spectral bands observed in the electronic transition S(1) ← S(0) of the NpAr complex.     

Ab initio potential-energy surface for the reaction Ca+HCl-->CaCl+H

The potential-energy surface of the ground electronic state of CaHCl has been obtained from 6400 ab initio points calculated at the multireference configuration-interaction level and represented by a global analytical fit. The Ca+HCl-->CaCl+H reaction is endothermic by 5100 cm(-1) with a barrier of 4470 cm(-1) at bent geometry, taking the zero energy in the Ca+HCl asymptote. On both sides of this barrier are potential wells at linear geometries, a shallow one due to van der Waals interactions in the entrance channel, and a deep one attributed to the H(-)Ca(++)Cl(-) ionic configuration. The accuracy of the van der Waals well depth, approximately 200 cm(-1), was checked by means of additional calculations at the coupled-cluster singles and doubles with perturbative triples level and it was concluded that previous empirical estimates are unrealistic. Also, the electric dipole function was calculated, analytically fitted in the regions of the two wells, and used to analyze the charge shifts along the reaction path. In the insertion well, 16,800 cm(-1) deep, the electric dipole function confirmed the ionic structure of the HCaCl complex and served to estimate effective atomic charges. Finally, bound rovibrational levels were computed both in the van der Waals well and in the insertion well, and the infrared-absorption spectrum of the insertion complex was simulated in order to facilitate its detection.     

Ab initio intermolecular potential energy surface and thermophysical properties of hydrogen sulfide

A six-dimensional potential energy hypersurface (PES) for two interacting rigid hydrogen sulfide molecules was determined from high-level quantum-mechanical ab initio computations. A total of 4016 points for 405 different angular orientations of two molecules were calculated utilizing the counterpoise-corrected supermolecular approach at the CCSD(T) level of theory and extrapolating the calculated interaction energies to the complete basis set limit. An analytical site-site potential function with eleven sites per hydrogen sulfide molecule was fitted to the interaction energies. The PES has been validated by computing the second pressure virial coefficient, shear viscosity, thermal conductivity and comparing with the available experimental data. The calculated values of volume viscosity were not used to validate the potential as the low accuracy of the available data precluded such an approach. The second pressure virial coefficient was evaluated by means of the Takahashi and Imada approach, while the transport properties, in the dilute limit, were evaluated by utilizing the classical trajectory method. In general, the agreement with the primary experimental data is within the experimental error for temperatures higher than 300 K. For lower temperatures the lack of reliable data indicates that the values of the second pressure virial coefficient and of the transport properties calculated in this work are currently the most accurate estimates for the thermophysical properties of hydrogen sulfide.     

Ab initio and analytic intermolecular potentials for Ar-CF4

Ab initio calculations at the CCSD(T) level of theory were performed to characterize the Ar + CF4 intermolecular potential. Potential energy curves were calculated with the aug-cc-pVTZ basis set, and with and without a correction for basis set superposition error (BSSE). Additional calculations were performed with other correlation consistent basis sets to extrapolate the Ar-CF4 potential energy minimum to the complete basis set (CBS) limit. Both the size of the basis set and BSSE have substantial effects on the Ar + CF4 potential. Calculations with the aug-cc-pVTZ basis set, and with a BSSE correction, appear to give a good representation of the BSSE corrected potential at the CBS limit. In addition, MP2 theory is found to give potential energies in very good agreement with those determined by the much higher level CCSD(T) theory. Two model analytic potential energy functions were determined for Ar + CF4. One is a fit to the aug-cc-pVTZ calculations with a BSSE correction. The second was derived by fitting an average BSSE corrected potential, which is an average of the CCSD(T)/aug-cc-pVTZ potentials with and without a BSSE correction. These analytic functions are written as a sum of two-body potentials and excellent fits to the ab initio potentials are obtained by representing each two-body interaction as a Buckingham potential.     

Ab initio ground state phenylacetylene-argon intermolecular potential energy surface and rovibrational spectrum

We evaluate the phenylacetylene-argon intermolecular potential energy surface by fitting a representative number of ab initio interaction energies to an analytic function. These energies are calculated at a grid of intermolecular geometries, using the CCSD(T) method and the aug-cc-pVDZ basis set extended with a series of 3s3p2d1f1g midbond functions. The potential is characterized by two equivalent global minima where the Ar atom is located above and below the phenylacetylene plane at a distance of 3.5781 A? from the molecular center of mass and at an angle of 9.08° with respect to the axis perpendicular to the phenylacetylene plane and containing the center of mass. The calculated interaction energy is -418.9 cm(-1). To check further the potential, we obtain the rovibrational spectrum of the complex and the results are compared to the available experimental data.     

Ab initio potential-energy surfaces for complex, multichannel systems using modified novelty sampling and feedforward neural networks

A neural network/trajectory approach is presented for the development of accurate potential-energy hypersurfaces that can be utilized to conduct ab initio molecular dynamics (AIMD) and Monte Carlo studies of gas-phase chemical reactions, nanometric cutting, and nanotribology, and of a variety of mechanical properties of importance in potential microelectromechanical systems applications. The method is sufficiently robust that it can be applied to a wide range of polyatomic systems. The overall method integrates ab initio electronic structure calculations with importance sampling techniques that permit the critical regions of configuration space to be determined. The computed ab initio energies and gradients are then accurately interpolated using neural networks (NN) rather than arbitrary parametrized analytical functional forms, moving interpolation or least-squares methods. The sampling method involves a tight integration of molecular dynamics calculations with neural networks that employ early stopping and regularization procedures to improve network performance and test for convergence. The procedure can be initiated using an empirical potential surface or direct dynamics. The accuracy and interpolation power of the method has been tested for two cases, the global potential surface for vinyl bromide undergoing unimolecular decomposition via four different reaction channels and nanometric cutting of silicon. The results show that the sampling methods permit the important regions of configuration space to be easily and rapidly identified, that convergence of the NN fit to the ab initio electronic structure database can be easily monitored, and that the interpolation accuracy of the NN fits is excellent, even for systems involving five atoms or more. The method permits a substantial computational speed and accuracy advantage over existing methods, is robust, and relatively easy to implement.     

Ab initio potential energy surface and bound states for the Kr-OCS complex

The first ab initio potential energy surface of the Kr-OCS complex is developed using the coupled-cluster singles and doubles with noniterative inclusion of connected triples [CCSD(T)]. The mixed basis sets, aug-cc-pVTZ for the O, C, and S atom, and aug-cc-pVQZ-PP for the Kr atom, with an additional (3s3p2d1f) set of midbond functions are used. A potential model is represented by an analytical function whose parameters are fitted numerically to the single point energies computed at 228 configurations. The potential has a T-shaped global minimum and a local linear minimum. The global minimum occurs at R = 7.146 a(0), θ = 105.0° with energy of -270.73 cm(-1). Bound state energies up to J = 9 are calculated for three isotopomers (82)Kr-OCS, (84)Kr-OCS, and (86)Kr-OCS. Analysis of the vibrational wavefunctions and energies suggests the complex can exist in two isomeric forms: T-shaped and quasi-linear. The calculated transition frequencies and spectroscopic constants of the three isotopomers are in good agreement with the experimental values.     

Ab initio global potential-energy surface for H5(+) --> H3(+) + H2

An accurate global potential-energy surface (PES) is reported for H5(+) based on more than 100,000 CCSD(T)/aug-cc-pVTZ ab initio energies. This PES has full permutational symmetry with respect to interchange of H atoms and dissociates to H3(+) and H2. Ten known stationary points of H5(+) are characterized and compared to previous ab initio calculations. Quantum diffusion Monte Carlo calculations are performed on the PES to obtain the zero-point energy of H5(+) and the anharmonic dissociation energy (D0) of H5(+) --> H3(+) + H2. The rigorous zero-point state of H4D+ is also calculated and discussed within the context of a strictly classical approach to obtain the branching ratio of the reaction H4D+ --> H3(+) + HD and H2D+ + H2. Such an approach is taken using the PES and critiqued based on the properties of the quantum zero-point state. Finally, a simple procedure for adding the long range-interaction energy is described.     

Ab initio and analytical intermolecular potential for ClO-H2O

In recent years, the ClO free radical has been found to play an important role in the ozone removal processes in the atmosphere. In this work, the authors present a potential energy surface scan of the ClO.H2O system with high-level ab initio methods. Because of the existence of low-lying excited states of the ClO.H2O complex and their potential impact on the chemical behavior of the ClO radical in the atmosphere, the authors perform the potential energy surface scan at the CCSD(T)/aug-cc-pVTZ level of theory of both the first excited and ground states. Analytical potentials for both ground and excited states, with the ClO and H2O units held fixed at their optimized geometries and with anisotropic atomic polarizabilities modeling the physics of the unpaired electron in the ClO radical, were built based on a Thole-type model. The two minima of the ClO.H2O complex are recovered by the analytical potential.     

A new ab initio intermolecular potential energy surface and predicted rotational spectra of the Ne-H2S complex

We report a new three-dimensional ab initio intermolecular potential energy surface for the Ne-H(2)S complex with H(2)S monomer fixed at its experimental average structure. Using the supermolecular approach, the intermolecular potential energies were evaluated at CCSD(T) (coupled cluster with single and double and perturbative triple excitations) level with large basis sets including bond functions. The full counterpoise procedure was employed to correct the basis set superposition error. The planar T-shaped global minimum is located at the intermolecular distance of 3.51 ? with a well depth of 71.57 cm(-1). An additional planar local minimum was found to be separated from the global minimum with an energy barrier of 23.11 cm(-1). In addition, two first-order and one second-order saddle points were also located. The combined radial discrete variable representation/angular finite basis representation method and the Lanczos algorithm were employed to evaluate the rovibrational energy levels for eight isotopic species of the Ne-H(2)S complexes. The rotational transition frequencies for the eight isotopomers were also determined for the ground and first vibrational excited states, which are all in very good agreement with the available experimental values.     

A new ab initio intermolecular potential energy surface and predicted rotational spectra of the Ar-H2S complex

We report a reliable three-dimensional ab initio intermolecular potential energy surface for the Ar-H(2)S complex with H(2)S monomer fixed at its experimental average structure. The potential energies were evaluated using the supermolecular approach at the coupled-cluster level with a large basis set including bond functions. The full counterpoise procedure was used to correct the basis set superposition error. The potential has a planar T-shaped global minimum with a well depth of 177.48 cm(-1) at the intermolecular distance of 3.72 ?. An additional planar local minimum is also found and is separated from the global minimum with an energy barrier with a height of 47.46 cm(-1). The combined radial discrete variable representation/angular finite basis representation method and the Lanczos algorithm were employed to calculate the rovibrational energy levels for three isotopic species of Ar-H(2)S complexes (Ar-H(2)(32)S, Ar-H(2)(33)S, and Ar-H(2)(34)S). The rotational transition frequencies and structural parameters for the three isotopomers were also determined for the ground and the first excited states, which are all in good agreement with the available experimental values.     

Ab initio intermolecular potential energy surface and second pressure virial coefficients of methane

A six-dimensional potential energy hypersurface (PES) for two interacting rigid methane molecules was determined from high-level quantum-mechanical ab initio computations. A total of 272 points for 17 different angular orientations on the PES were calculated utilizing the counterpoise-corrected supermolecular approach at the CCSD(T) level of theory with basis sets of aug-cc-pVTZ and aug-cc-pVQZ qualities. The calculated interaction energies were extrapolated to the complete basis set limit. An analytical site-site potential function with nine sites per methane molecule was fitted to the interaction energies. In addition, a semiempirical correction to the analytical potential function was introduced to take into account the effects of zero-point vibrations. This correction includes adjustments of the dispersion coefficients and of a single-parameter within the fit to the measured values of the second virial coefficient B(T) at room temperature. Quantitative agreement was then obtained with the measured B values over the whole temperature range of the measurements. The calculated B values should definitely be more reliable at very low temperatures (T<150 K) than values extrapolated using the currently recommended equation of state.     

Ab initio potential energy surface and bound states of the Xe-CO complex

The first two-dimensional potential energy surface for the Xe-CO van der Waals interaction is calculated by the single and double excitation coupled-cluster theory with noniterative treatment of triple excitations. Mixed basis sets, aug-cc-pVQZ for the C and O atoms, and aug-cc-pVQZ-PP for the Xe atom, with an additional (3s3p2d2f1g) set of midbond functions, are used. Our potential energy surface has a single, nearly T-shaped minimum of -131.87 cm(-1) at R(e)=7.80a(0) and theta(e)=102.5 degrees. Based on the potential, the bound state energies are calculated for seven isotopomers of the Xe-(12)C(16)O complex, seven isotopomers of the Xe-(13)C(16)O complex, and three isotopomers of the Xe-(13)C(18)O complex. Compared with available experimental data, the predicted transition frequencies and spectroscopic constants are in good agreement with the experimental results.     

硝酸乙酯分子间相互作用的ab initio研究

在abinitio-HF/6-31G水平上求得硝酸乙酯二聚体势能面上的四种优化构型和电子结构。经MP2电子相关校正和基组叠加误差(BSSE)以及零点能(ZPE)校正，求得二聚体的最大结合能为11.46kJ.mol^-^1，还进行HF/6-311G和HF/6-311++G水平的总能量比较计算，发现6-31G基组对计算结合能比较适合，二子体系间的电荷转移很少，对优化构型进行振动分析，并基于统计热力学求得从单体形成二聚体的热力学性质变化。     

Ab initio calculations and vibrational energy level fits for the lower singlet potential-energy surfaces of C3

Ab initio multireference configuration interaction potential energy surfaces are computed for the eight lowest singlet surfaces of C(3). These reveal several important features, including several conical intersections in linear, nonlinear, and equilateral triangle geometries. These intersections are important because, particularly for the excited A (1)Pi(u) state, reasonable ab initio results could only be obtained by including nearby, near degenerate, (1)Sigma(u) (-) and (1)Delta(u) states that cross the A (1)Pi(u) state around 4500 cm(-1) above the equilibrium geometry, and a (1)Pi(g) state whose potential in turn crosses the other states about 2000 cm(-1) further up. These states are probably responsible for the complexity of the shorter wavelength UV absorption spectrum of C(3). The computed potential energy surface for the ground, X (1)Sigma(g) (+), state and for the lowest two excited singlet surfaces (which both correlate with the A (1)Pi(u) state in a collinear geometry) are fitted to analytic functional forms. Vibrational energy levels are calculated for both states, taking account of the Renner-Teller coupling in the excited A (1)Pi(u) state. The potential parameters for both states are then least-squares fitted to experimental data. The ground-state fit covers a range of approximately 8500 cm(-1) above the lowest level, and reproduces 100 observed vibrational levels with an average error of 2.8 cm(-1). The A (1)Pi(u) state surfaces cover a range of 3250 cm(-1) above the zero-point level, and reproduce the 44 observed levels in this range with an average error of 2.8 cm(-1).