Preparation of micron-size polystyrene particles in supercritical carbon dioxide

The dispersion polymerization of styrene in supercritical CO₂ utilizing poly(1,1-dihydroperfluorooctyl acrylate) (p-FOA) as a polymeric stabilizer was investigated as well as poly(1,1-dihydroperfluorooctyl methacrylate) (p-FOMA). The resulting high yield (>85%) of spherical and relatively uniform polystyrene (PS) particles with micron-size range (2.9–9.6 µm) was formed for 40 h at 370 bar using various amounts of p-FOA and p-FOMA as a stabilizer with good stability until the end of the reaction. The particle diameter was shown to be dependent on the weight percent of added stabilizer. Previously, we reported that p-FOA was not effective for the dispersion polymerization of styrene as a stabilizer. Here, we find that p-FOA can indeed be an effective stabilizer for the dispersion polymerization of styrene in supercritical CO₂, but the pressure necessary to achieve good stability is higher than pressure used by us previously. This study suggests the possibility that fluorinated acrylic homopolymers are effective for the dispersion polymerization of various kinds of monomers as a stabilizer. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2429–2437, 1999     

Effect of pressure and temperature upon tin alkoxide-promoted ring-opening polymerisation of epsilon-caprolactone in supercritical carbon dioxide

Ring-opening polymerisation of epsilon-caprolactone in supercritical carbon dioxide is slowed down by a carbonation reaction, resulting in a positive volume of activation and a higher energy of activation as compared to polymerisation in a regular hydrocarbon solvent.     

Competitive influence of atactic polystyrene and supercritical carbon dioxide on the conformation of syndiotactic polystyrene

The crystallization behavior of miscible syndiotactic polystyrene (sPS) and atactic polystyrene (aPS) blends with different sPS/aPS weight ratios was investigated in supercritical CO₂ by using Fourier‐transform infrared spectroscopy, differential scanning calorimetry, and wide‐angle X‐ray diffraction. Supercritical CO₂ and aPS exhibited different effects on the conformational change of sPS and competed with each other. Increasing the content of amorphous aPS in the blends made its effect on the conformational change of sPS gradually surpass that of supercritical CO₂. Supercritical CO₂ favored the formation of the helical conformation of sPS in lower temperature range and the all trans planar conformation in higher temperature range, instead of forming the latter one only in higher temperature range in ambient atmosphere. However, increasing aPS content in the blends pushed the range for forming the helical conformation to lower temperature and made the all trans planar conformation dominant in aPS/sPS 25/75 blend after treating in supercritical CO₂ above 60 °C. The all trans planar zigzag conformation was more favorable than the helical conformation after mixing aPS in sPS in supercritical CO₂. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1755–1764, 2007     

Preparation and characterization of microcellular polystyrene/polystyrene ionomer blends with supercritical carbon dioxide

The preparation of microcellular polystyrene (PS), lightly sulfonated polystyrene (SPS), zinc‐neutralized lightly sulfonated polystyrene (ZnSPS), and blends of PS/SPS and PS/ZnSPS via supercritical CO₂ was carried out with the pressure‐quench process. Both higher foaming temperature and lower pressure result in larger cell sizes, lower cell densities, and lower relative density for microcellular ionomers and blends as for microcellular PS. The difference among various microcellular samples is the change of cell size with the sample composition. The cell size decreases in the sequence from SPS, through PS/SPS blends, PS and PS/ZnSPS blends, to ZnSPS. The diffusivity of CO₂ in samples also decreases in the sequence from SPS, through PS/SPS blends, PS and PS/ZnSPS blends, to ZnSPS. For this series of samples with similar structure and identical solubility of CO₂, the varying diffusivity is responsible for the difference of cell sizes. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 368–377, 2003     

Free volume expansion and nanofoaming of supercritical carbon dioxide treated polystyrene

Free volume of polystyrene films treated with supercritical carbon dioxide (SCCO 2) were examined by positron annihilation lifetime spectroscopy. Variation of the free volume sizes after the SCCO 2 treatment due to the release of trapped CO 2 and structural relaxation of the polymer was observed. After 500 h from the depressurization, the free volume of the treated films free from CO 2 was approximately 0.306 nm in radius and much larger than that of the untreated films of approximately 0.295 nm in radius due to the freezing of the swollen structure caused by the large solubility of CO 2.     

Effect of supercritical carbon dioxide on nanoporous polyhexafluoropropylene

The effect of supercritical CO₂ (sc-CO₂) on the size distribution of free volume holes (nanopores) in a polyhexafluoropropylene (PHFP) polymer matrix has been studied. Residual (after CO₂ release) swelling improves gas transport properties of the material. Relaxation of these properties over time has been compared with changes in permeability and nanoporosity. For PHFP samples with different histories, the data on nanoporosity have been obtained using positron annihilation lifetime spectroscopy (micropores) and the lowtemperature gas sorption technique (mesopores and part of micropores). Matching of the data is intended to reveal the role of pores of different sizes in permeability of membrane materials to different gases and determine the specifics of application of the positron annihilation technique to studying sc-CO₂-modified objects.     

Control of enantioselectivity of lipase-catalyzed esterification in supercritical carbon dioxide by tuning the pressure and temperature

The enantioselectivity of lipase-catalyzed esterification of 1-(p-chlorophenyl)-2,2,2-trifluoroethanol in supercritical carbon dioxide was controlled by tuning the pressure and temperature. The enantioselectivity was higher at low pressure and low temperature (E=60) than at high pressure and high temperature (E=10). At the density of 0.75 g/mL, a modified Eyring plot of ln E against 1/T was found to be linear, as expected from the theory on the effects of temperature on stereochemistry.     

Estimation of the surface tension of liquid carbon dioxide

The surface tension of liquid carbon dioxide has practical significance in material science, environmental science and chemical engineering separation processes as well as in the secondary or tertiary recovery of petroleum. The surface tension of liquid carbon dioxide is estimated by semi-empirical and statistical formulae and the results are compared and analysed with experimental data. It is shown that the methods proposed by Brock, Hakim, Miqueua and Zuo are better methods for estimating the surface tension of liquid carbon dioxide and have relatively less percentage deviation from experimental data.     

Analysis of polystyrene surface properties on thin film bonding under carbon dioxide pressure using nanoparticle embedding technique

A gold nanoparticle embedding technique is used to determine how vacuum and pressured carbon dioxide (CO₂) affect polystyrene (PS) thin film properties. The pressured CO₂ greatly increased the gold nanoparticle embedding depth, possibly due to a low cohesive energy density near the film surface. For the monodisperse PS used in this study (M_n = 214,000), two spin‐coated thin films with intimate contact can be bonded below the bulk glass transition temperature (T_g) under CO₂ pressure when the embedded depth is larger than half of the gyration radius of PS molecules. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1535–1542, 2009     

Effect of density fluctuating supercritical carbon dioxide on polymer interfaces

We investigated an effect of CO2 sorption on the compatibility of immiscible polystyrene (PS) and polybutadiene (PB) bilayers by using in situ neutron reflectivity. By labeling either polymer with deuterium, we found that the excess CO2 molecules were adsorbed to both top PS and bottom PB layers when the bilayers were exposed to CO2 at the narrow T and P regime near the critical point of pure CO2. Furthermore, we clarified that this excess sorption of CO2 molecules increased the interfacial width between the layers up to 100 angstroms even near room temperature, while the interfacial width without CO2 exposure has been reported to be at most 40 A even at the highest temperature (T congruent with 175 degrees C).     

在超临界CO2流体中的化学反应

超临界CO2流体中的化学反应是继超临界流体应用于萃取分离过程之后进一步将其应用于化学反应的新尝试。本文重点综述了超临界CO2流体中的化学反应研究进展, 并对其发展前景作了展望。     

Photoactivity of titanium dioxide/carbon felt composites prepared with the assistance of supercritical carbon dioxide: Effects of calcination temperature and supercritical conditions

TiO2-coated carbon felt(TCF)composite catalysts have been prepared via a supercritical treatment of titanium tetraisopropoxide(TTIP)as the precursor.The physical properties of the catalysts were characterized by means of thermogravimetric and differential thermal analysis(TG–DTA),X-ray diffraction(XRD),fluorescence spectroscopy,scanning electron microscopy (SEM),and BET surface areas techniques.The photocatalytic activities of the materials were evaluated using the degradation of Congo red(CR)as a probe rea...     

Synthesis of supercritical carbon dioxide soluble perfluorinated dendrons for surface modification

The rational design, synthesis, and characterization of a series of novel perfluorinated dendrons 14a,b, 25a,b, 26a,b, and 18 are described. The dendrimers were designed to have a thiol at the focal point for attachment to a gold surface to enable the fabrication of self-assembled monolayers (SAMs). Perfluorinated tails were attached to the periphery to provide solubility in supercritical carbon dioxide, and to increase the hydrophobicity and the stability of self-assembled monolayers formed. Mitsunobu reactions were utilized to provide high-yielding steps allowing large-scale production of the novel dendrimers.     

Dissolution of uranium dioxide in supercritical fluid carbon dioxide

Uranium dioxide can be dissolved in supercritical CO2 with a CO2-philic TBP-HNO3 complexant to form a highly soluble UO2(NO3)(2).2TBP complex; this new method of dissolving UO2 that requires no water or organic solvent may have important applications for reprocessing of spent nuclear fuels and for treatment of nuclear wastes.     

Monoacetylferrocene crystallization in supercritical carbon dioxide

An organometallic compound, monoacetylferrocene, was for the first time obtained as single crystals by crystallization from supercritical carbon dioxide. This offers the possibility of utilizing supercritical media for efficient crystallization and purification of organometallic compounds without using organic solvents. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 555–557, March, 2006.     

Olefin metathesis in supercritical carbon dioxide

Liquid or supercritical carbon dioxide (scCO(2)) is a versatile reaction medium for ring-opening metathesis polymerization (ROMP) and ring-closing olefin metathesis (RCM) reactions using well-defined metal catalysts. The molybdenum alkylidene complex 1 and ruthenium carbenes 2 and 3 bearing PCy(3) or N-heterocyclic carbene ligands, respectively, can be used and are found to exhibit efficiency similar to that in chlorinated organic solvents. While compound 1 is readily soluble in scCO(2), complexes 2 and 3 behave like heterogeneous catalysts in this reaction medium. Importantly, however, the unique properties of scCO(2) provide significant advantages beyond simple solvent replacement. This pertains to highly convenient workup procedures both for polymeric and low molecular weight products, to catalyst immobilization, to reaction tuning by density control (RCM versus acyclic diene metathesis polymerization), and to applications of scCO(2) as a protective medium for basic amine functions. The latter phenomenon is explained by the reversible formation of the corresponding carbamic acid as evidenced by (1)H NMR data obtained in compressed CO(2). Together with its environmentally and toxicologically benign character, these unique physicochemical features sum up to a very attractive solvent profile of carbon dioxide for sustainable synthesis and production.     

超临界二氧化碳介质中有机化学反应研究

综述了本研究小组近年来在超临界二氧化碳介质中过渡金属催化的有机化学反应的研究结果,主要包括烯烃和炔烃的羰基化反应、氧化反应、自由基反应、低聚反应。     

Impact of carbon dioxide on the surface tension of 1-hexanol aqueous solutions

Effects of carbon dioxide presence on the surface tension and adsorption kinetics of 1-hexanol solutions were investigated. Experiments were performed at a range of carbon dioxide vapor pressures and varying concentrations of 1-hexanol aqueous solution. Both dynamic and steady-state surface tensions of 1-hexanol aqueous solution were found to decrease with carbon dioxide pressure, and a linear relationship was observed between the steady-state surface tension and carbon dioxide pressure. To explain the experiments, adsorption and desorption of the two species (1-hexanol and carbon dioxide) from two sides of the vapor-liquid interface were considered. A modified Langmuir isotherm, the modified Langmuir equation of state and the modified kinetic transfer equation were developed. The resulting steady-state and dynamic surface tension data were modeled using the modified Langmuir equation of state and the modified kinetic transfer equation, respectively. Equilibrium constants and adsorption rate constants of 1-hexanol and carbon dioxide were evaluated through a minimization procedure for CO₂ pressures ranging from 0 to 690 kPa. From the steady-state modeling, the equilibrium parameters for 1-hexanol and carbon dioxide adsorption from vapor phase and liquid phase were found unchanged at different pressures of carbon dioxide. From the dynamic modeling, the adsorption rate constants for 1-hexanol and carbon dioxide from vapor phase and liquid phase were found to decrease with carbon dioxide pressure. Some fluctuations in the fitting parameters of the dynamic modeling (adsorption rate constants) were observed. These fluctuations may be due to experimental errors, or more likely the limitations of the model used. A major limitation of the model is related to large differences in adsorption/desorption between initial and final stages of the process, and a single set of property parameters cannot describe both initial and final states of the system. Variations may occur depending on which set of data, of initial or final states, is used in the model predictions over the entire time range.     

Effect of molecular weight on the diffusion coefficient of carbon dioxide in polystyrene

The permeability and time lag at pressures below 1 atm were measured for carbon dioxide in five polystyrene samples with different molecular weights at 25 to 40°C. The apparent permeability coefficient decreases with increasing carbon dioxide pressure and also decreases with increasing molecular weight of polystyrene, whereas the apparent diffusion coefficient calculated from time lag increases with pressure and is independent of molecular weight. Parameters for the partial-immobilization model were determined from the apparent diffusion and permeation coefficients by using a nonlinear least-squares optimization program without using sorption data. The results suggest that the void-saturation constant C′_H decreases as the molecular weight of the polymer increases or as the chain-end free volume decreases. The significance of these observation and their interpretation is discussed in terms of free-volume theory for glassy polymers.     

Nucleophilic displacements in supercritical carbon dioxide under phase-transfer catalysis conditions. 2. Effect of pressure and kinetics

The nucleophilic displacement on n-octylmesylate (n-C(8)H(17)OSO(2)CH(3), 1) with four different anions (I(-), Br(-), N(3)(-), and SCN(-)) is investigated under liquid-supercritical phase-transfer catalysis (LSc-PTC) conditions, i.e. in a biphase system of supercritical carbon dioxide (scCO(2)) and water, in the presence of both silica supported and conventional onium salts. The CO(2) pressure greatly affects the concentration of 1 in the sc-phase and plays a major role on its conversion. For example, at 50 degrees C and with a supported PT-catalyst, the conversion of 1 into n-octyl iodide drops by a factor of 5 as the CO(2) pressure is increased from 80 to 150 bar, while in the same pressure range, the solubility of n-octylmesylate in scCO(2) shows a 6-fold increase, indicating that the reagent is desorbed from the catalyst. Under LSc-PTC conditions, pseudo-first-order kinetic rate constants, evaluated for the investigated reactions, show that the performance of scCO(2) as a PTC solvent and the relative nucleophilicity order of the anions (N(3)(-) > I(-) > or = Br(-) > SCN(-)) are comparable to those of toluene and n-heptane. The behavior of conventional phosphonium salts in the scCO(2)/H(2)O biphase system suggests that the reaction may take place either within small droplets of PT-catalyst containing water or in a separate third liquid phase of the PT-catalyst itself.