Determination of mono- and disaccharides by capillary electrophoresis with contactless conductivity detection

The separation and detection of common mono- and disaccharides by capillary electrophoresis (CE) with contactless conductivity detection (CCD) is presented. At high values of pH, the sugars are converted to anionic species that can be separated by CE and indirectly detected by CCD. The main anionic species present in the running electrolytes are hydroxide and phosphate, which have greater mobility than the ionized sugars, and, thus, the indirect detection is possible. The method was applied to analysis of glucose, fructose, and sucrose in soft drinks, isotonic beverages, fruit juice, and sugarcane spirits. Galactose was used as internal standard in all cases. Plate numbers range from ca. 70,700 to 168,200 and the limits of detection from 13 to 31 microM.     

Miniaturization in carbohydrate analysis

Recent progress of microchip electrophoresis (ME) of carbohydrates is overviewed. Carbohydrate analysis by ME encounters difficulties such as lack of electric charge and deficiency of a chromophore/fluorophore in analyte molecules, however, it benefits from the accumulated knowledge of capillary electrophoresis (CE) and rapid separation of simple sugars also by ME, with high column efficiency comparable to CE, has become possible. Analysis at high pH, with electrochemical detection, is a promising approach because carbohydrates can be ionized by weak dissociation of the hydroxyl groups and the in situ formed ionic species can be effectively separated by the zone electrophoresis mode. The separated species can be sensitively monitored by electrochemical detection on a gold or copper electrode. Ionization as borate complexes and refractometric detection is also possible, though sensitivity is lower. Introduction of UV-absorbing or fluorescent tags is potentially useful but the time-consuming derivatization processes sacrifice the rapidity of ME. Examples of ME of carbohydrates as 1-phenyl-3-methyl-5-pyrazolone (PMP; for simple mono- and oligosaccharides with UV detection), 8-aminopyrene-1,3,6-trisulfonate (APTS; for oligosaccharides ladders with LIF detection), and 4-nitro-2,1,3-benzoxadiazole (NBD-F; for amino sugars and aminoalditols with LIF detection) derivatives are presented, with details of the analytical conditions. Since ME in a short separation channel enables rapid analysis within 1 min, it presents an ideal tool for clinical analysis, as shown in a few papers reporting protocols for specific blood glucose assay. Finally, the usefulness of microfluidic reactors and microarrays for enzyme-assisted carbohydrate analysis as well as glycan profiling is pointed out.     

Capillary electrophoretic analysis of neutral carbohydrates using ionic liquids as background electrolytes

In this study, ionic liquids (ILs) as BGE additives were applied for the analysis of neutral carbohydrates in CE. The ILs served primarily as chromophores for indirect UV detection. The influence of imidazolium-based ionic liquids on the separation, detection limits and mobility of underivatized neutral carbohydrates was investigated. BGEs consisting of 10-50 mM of ILs at pH 12.4 without other additives provided fast separation of neutral sugars. This method was used to determine sucrose, glucose and fructose in certain vegetable juices.     

A Capillary Electrophoresis End‐Column Amperometric Detection System Incorporating Disposable Copper‐Plated Screen‐Printed Carbon Electrodes

We report here the development of copper‐plated screen‐printed carbon electrodes (designated as Cu‐SPE) to employ as electrochemical detectors for the determination of sugars by capillary electrophoresis (CE). A simple end‐column amperometric detection system with easily exchangeable (or even disposable) electrode and capillary in CE is described in this study. A complex alignment procedure was not required in this system based on the end‐column electrode arrangement using an 85 cm length and 20 μm (i.d.) capillary. The optimized separation voltage and applied potential were 9 KV and 0.4 V (vs. Ag/AgCl), respectively, for the detection of sugars using the Cu‐SPE. Good resolution was obtained by this proposed system with migration times of 28.8, 29.5, 29.9, 30.7, 31.2, and 32.0 min for galactose, glucose, arabinose, fructose, xylose, and ribose, respectively.     

Deviceless decoupled electrochemical detection of catecholamines in capillary electrophoresis using gold microband array electrodes

Samples containing microM concentrations of dopamine, (+/-)-isoproterenol, para-aminophenol and chlorogenic acid have been separated by capillary electrophoresis (CE) and detected using end-column amperometric detection based on a novel decoupling method. The present decoupling approach involves the use of an electrochemical detector chip containing an array of microband electrodes where the working and reference electrodes are positioned only 10 microm from each other. The short distance between the working and reference electrodes ensures that both electrodes are very similarly affected by the presence of the CE electric field. With this method, no shift in the detection potential was seen when the CE high voltage was applied. This eliminated the need for a reoptimization of the detection potential to compensate for the influence of the separation voltage on the detection. It is also demonstrated that catecholamines can be detected using gold microband electrodes by careful adjustment of the detection potential to avoid the formation of gold oxide. Such careful adjustments of the detection potential are straightforward using the present decoupling method.     

聚(2-甲基-2-噁唑啉)在毛细管电泳分离蛋白质中的应用

毛细管电泳作为一种常见的液相分离技术,因其分析速度快、分离效率高、样品消耗量少等特点,在蛋白质分离分析领域有广泛应用。然而,常用的熔融硅毛细管容易吸附蛋白质,导致电渗流不稳定,分离结果重现性变差;此外,商用毛细管电泳中常用的紫外检测器由于光程短,使得毛细管电泳的检测灵敏度往往不能达到低丰度蛋白质的直接分析要求。因此寻找能够阻止蛋白质吸附、同时能够提高检测灵敏度的涂层是毛细管电泳分离分析蛋白质的重要课题之一。聚（2-甲基-2-噁唑啉）（PMOXA）作为一种类肽类亲水性聚合物,具有与抗蛋白质吸附聚合物聚乙二醇类似的亲水性、抗蛋白质吸附性和生物相容性,而且其类肽结构使之具有较聚乙二醇更好的稳定性,因此近年来在生物质传递、药物载体和阻抗蛋白质吸附等领域得到越来越多的应用。该文主要从两个方面对聚（2-甲基-2-噁唑啉）在毛细管电泳中的应用进行了阐述。一是利用多巴胺作为黏合层将其涂覆在毛细管内壁作为抗蛋白质吸附涂层,这种涂层不仅能成功分离多种蛋白质的混合物（如溶菌酶、细胞色素C、核糖核酸酶A和α-胰凝乳蛋白酶原A）,而且在定量检测奶粉中三聚氰胺、乳铁蛋白的过程中,能阻抗其他蛋白质的非特异性吸附,提高了毛细管电泳对奶粉中三聚氰胺、乳铁蛋白的检测效率。二是将其与具有刺激响应性的聚合物（如聚丙烯酸）构成二元混合刷涂层,在一定的pH和离子强度条件下,涂层可吸附目标蛋白质（如牛血清白蛋白、溶菌酶）,在另一pH和离子强度条件下可将吸附的目标蛋白质全部释放,同时在释放过程中,处于涂层表面的聚（2-甲基-2-噁唑啉）会进一步阻止蛋白质的吸附,释放的蛋白质在电渗流和电泳的双重作用下快速迁移,到达检测器的蛋白质瞬时浓度大大增加,使目标蛋白质得到富集,目标蛋白质的检测信号得到放大,从而达到了提高低丰度蛋白质检测灵敏度的目的。此外,该文还对聚（2-甲基-2-噁唑啉）在毛细管电泳分离蛋白质中的未来发展趋势进行了展望。     

Carbon paste-based electrochemical detectors for microchip capillary electrophoresis/electrochemistry

The first reported use of a carbon paste electrochemical detector for microchip capillary electrophoresis (CE) is described. Poly(dimethylsiloxane) (PDMS)-based microchip CE devices were constructed by reversibly sealing a PDMS layer containing separation and injection channels to a separate PDMS layer that contained carbon paste working electrodes. End-channel amperometric detection with a single electrode was used to detect amino acids derivatized with naphthalene dicarboxaldehyde. Two electrodes were placed in series for dual electrode detection. This approach was demonstrated for the detection of copper(II) peptide complexes. A major advantage of carbon paste is that catalysts can be easily incorporated into the electrode. Carbon paste that was chemically modified with cobalt phthalocyanine was used for the detection of thiols following a CE separation. These devices illustrate the potential for an easily constructed microchip CE system with a carbon-based detector that exhibits adjustable selectivity.     

Amperometric detector designs for capillary electrophoresis microchips

Electrochemical (EC) detection is a sensitive and miniaturisable detection mode for capillary electrophoresis (CE) microchips. Detection cell design is very important in order to ensure electrical isolation from the high separation voltage. Amperometric detectors with different designs have been developed for coupling EC detection to CE-microchips. Different working electrode alignment: in-channel or end-channel has been tested in conjunction with several materials: gold, platinum or carbon. The end-channel detector was based on a platinum or gold wire manually aligned at the exit of the separation channel. Thick- (screen-printed carbon electrode) and thin-film (sputtered gold film) electrodes have also been employed with this configuration, but with a different design that allowed the rapid replacement of the electrode. The in-channel detector was based on a gold film within the separation channel. A gold-based dual electrode detector, which combined for the first time in- and end-channel detection, has been also tested. These amperometric detectors have been evaluated in combination to poly(methylmethacrylate) (PMMA) and Topas (thermoplastic olefin polymer of amorphous structure) CE-microchips. Topas is a new and promising cyclic olefin copolymer with high chemical resistance. Relevant parameters of the polymer microchip separation such as precision, efficiency or resolution and amperometric detection were studied with the different detector designs using p-aminophenol and L-ascorbic acid as model analytes in Tris-based buffer pH 9.0.     

Gold nanomaterials based pseudostationary phases in capillary electrophoresis: A brand‐new attempt at chondroitin sulfate isomers separation

In this work, a CE method with bare gold nanorods (GNRs) based pseudostationary phase was developed and applied for the separation of chondroitin sulfate (CS) isomers, CS, and dermatan sulfate (DS). The separation efficiency was investigated by varying the experimental parameters such as concentration and pH of the BGE, separation voltage, internal diameter of capillary, different size, and morphology of gold nanomaterials. Results showed that different size and morphology of gold nanomaterials had different effects on the separation of CS and DS. The best separation of CS and DS was achieved in the BGE composed of aqueous 150 mmol/L (mM) ethylenediamine + 20 mM sodium dihydrogen phosphate + 30% v/v GNRs, pH 4.5, at the separation voltage of ?10 kV. Capillary was 59.2 cm in length (effective length 49 cm), 50 μm id capillary thermostated at 25°C. CE with bare GNRs used as pseudostationary phase was shown to be a suitable technique for the separation of CS and DS mixtures with wider peaks. RSD of migration time and peak area of CS and DS were 0.13, 0.14 and 0.86, 1.07%, respectively.     

Applications of a versatile sol-gel derived renewable electrode for capillary electrophoresis

A new electrode has been developed and applied for amperometric detection in capillary electrophoresis (CE), comprised of carbon sol-gel composite material. The versatility of the sol-gel technique permits the flexible configuration of the electrode. The performance of such a sol-gel carbon composite electrode (CCE) is first evaluated in a typical CE application for the detection of purine-based compounds. Application of the CCE is also demonstrated for the detection of phenolic compounds in a micellar system. Separation resolution for non-ionic phenolic compounds can significantly be enhanced by introducing sodium dodecyl sulfate (SDS) at a concentration above its critical micelle concentration (cmc) to the buffer. Another design of the CCE incorporating the electrocatalyst Cu2O is employed for the analysis of sugars and organic acids based on dynamic modification with cetyltrimethylammonium bromide (CTAB). It has been found that the presence of surfactant in the separation buffer does not adversely influence the electrochemical detection using a sol-gel derived carbon electrode.     

Applications of a versatile sol-gel derived renewable electrode for capillary electrophoresis

A new electrode has been developed and applied for amperometric detection in capillary electrophoresis (CE), comprised of carbon sol-gel composite material. The versatility of the sol-gel technique permits the flexible configuration of the electrode. The performance of such a sol-gel carbon composite electrode (CCE) is first evaluated in a typical CE application for the detection of purine-based compounds. Application of the CCE is also demonstrated for the detection of phenolic compounds in a micellar system. Separation resolution for non-ionic phenolic compounds can significantly be enhanced by introducing sodium dodecyl sulfate (SDS) at a concentration above its critical micelle concentration (cmc) to the buffer. Another design of the CCE incorporating the electrocatalyst Cu₂O is employed for the analysis of sugars and organic acids based on dynamic modification with cetyltrimethylammonium bromide (CTAB). It has been found that the presence of surfactant in the separation buffer does not adversely influence the electrochemical detection using a sol-gel derived carbon electrode.     

A handy detection cell for end-column electrochemical detection in capillary electrophoresis.

A handy and simple detection cell was constructed using a mixing joint for end-column electrochemical detection in capillary electrophoresis (CE). The cell allows for positioning of the working electrode at the end of the separation capillary without the aid of micropositioners. The design facilitates the exchange of electrodes and capillaries without the need to refabricate the entire capillary-electrode setup. The cell can be assembled in a short period of time. Alignment with the joint screw proved to be reproducible for working electrodes of copper and gold. The advantages of reduced time and low cost make the device very attractive for the routine analysis of electroactive species, such as carbohydrates and their derivatives, purine bases and nucleosides, amino acids, and catecholamines etc. by CE with electrochemical detection.     

Fast determination of sugars in Coke and Diet Coke by miniaturized capillary electrophoresis with amperometric detection

The fast separation capability of a novel miniaturized capillary electrophoresis with amperometric detection (CE-AD) system was demonstrated by determining sugar contents in Coke and diet Coke with an estimated separation efficiency of 60,000 TP/m. Factors influencing the separation and detection processes were examined and optimized. The end-capillary 300 microm Cu wire amperometric detector offers favorable signal-to-noise characteristics at a relatively low potential (+0.50 V vs. Ag/AgCl) for detecting sugars. Three sugars (sucrose, glucose, and fructose) have been separated within 330 s in a 8.5 cm length capillary at a separation voltage of 1000 V using a 50 mM NaOH running buffer (pH 12.7). Highly linear response is obtained for the above compounds over the range of 5.0 to 2.0 x 10(2) microg/mL with low detection limit, down to 0.8 microg/mL for glucose (S/N = 3). The injection-to-injection repeatability for analytes in peak current (RSD < 3.6%) and for migration times (RSD < 1.4%) was excellent. The new miniaturized CE-AD system should find a wide range of analytical applications involving assays of carbohydrates as an alternative to conventional CE and micro-CE.     

Capillary electrophoretic separation of sugars in fruit juices using on-line mid infrared Fourier transform detection

Fourier Transform infrared spectroscopy has been coupled to on-line capillary electrophoresis (CE) for the separation and detection of natural sugars in orange fruit juices. The CE separation electrolyte comprised 50 mM sodium carbonate buffer adjusted to pH 12.3 with NaOH. Galactose was selected as an internal standard. To ensure tight connections between the custom-made IR-transparent flow cell (optical path length was 15 [micro sign]m) and the fused silica capillaries, commercially available O-rings were used. The scanner of the spectrometer was operated at a HeNe laser modulation frequency of 320 kHz, recording interferograms in a double-sided, forward-backward mode with 8 cm(-1) spectral resolution. For each spectrum 64 interferograms (512 for the background) were co-added and a Blackman-Harris 3-term apodization function was performed. A low-pass filter at 1828 cm(-1) was inserted in the IR beam to increase the light throughput in the spectral region of interest (1800 cm(-1)-900 cm(-1)). Using these features a new spectrum could be obtained every two seconds. Sucrose, glucose and fructose were structurally identified and quantified in orange juice samples. The limits of detection (3S/N) for all analytes were in the low millimolar range (0.7-1.9 mM) or, in absolute amounts, the low nanogram range (1.5-3.2 ng). The resolution ranged between 1.14 to 3.15 and the RSD of the proposed method was 1.8-4.4%.     

Electroactive intercalators for DNA analysis on microchip electrophoresis

Miniaturized analytical systems, especially microchip CE (MCE), are becoming a promising tool for analytical purposes including DNA analysis. These microdevices require a sensitive and miniaturizable detection system such as electrochemical detection (ED). Several electroactive DNA intercalators, including the organic dye methylene blue (MB), anthraquinone derivatives, and the metal complexes Fe(phen)3 2+ and Ru(phen)3 2+, have been tested for using in combination with thermoplastic olefin polymer of amorphous structure (Topas) CE-microchips and ED. Two end-channel approaches for integration of gold wire electrodes in CE-ED microchip were used. A 250 microm diameter gold wire was manually aligned at the outlet of the separation channel. A new approach based on a guide channel for integration of 100 and 50 microm diameter gold wire has been also developed in order to reduce the background current and the baseline noise level. Modification of gold wire electrodes has been also tested to improve the detector performance. Application of MCE-ED for ssDNA detection has been studied and demonstrated for the first time using the electroactive dye MB. Electrostatic interaction between cationic MB and anionic ssDNA was used for monitoring the DNA on microchips. Thus, reproducible calibration curves for ssDNA were obtained. This study advances the feasibility of direct DNA analysis using CE-microchip with ED.     

Study of the separation and determination of monosaccharides in soluble coffee by capillary zone electrophoresis with electrochemical detection

A simple, fast and reliable method, based on capillary electrophoresis with electrochemical detection, for the separation and determination of six monosaccharides, namely glucose, galactose, arabinose, fructose, xylose and ribose, in soluble coffees was developed. A copper disk electrode was used as the working electrode. The optimum conditions for separation and detection were 50 mmol L-1 sodium hydroxide buffer (pH 12.7), separation voltage 5 kV and detection potential 0.65 V (vs. Ag/AgCl). The linear ranges were from 5.0 x 10(-3) to 0.5 mmol L-1 for all six sugars. All regression coefficients were > 0.99. The detection limits for all the sugars were 1.0 x 10(-3) mmol L-1. The RSD of the peak current was < 4.2% (n = 5). The proposed method was applied directly to the separation and determination of the six sugars without prior derivatization, and the assay results were satisfactory.     

Development of ion chromatography and capillary electrophoresis methods for the determination of Li in Li–Al alloy

Two methods were developed for determination Li content in Li–Al alloy by employing ion chromatography (IC) and capillary electrophoresis (CE) without any prior separation of Al matrix. In absence of suitable certified reference material the two methods were used to validate each other. Using a high capacity column and a weaker eluent methane sulphonic acid, it was possible to separate Li in IC without eluting strongly retained Al. The method showed good precision and sensitivity and was extended for analysis of routine samples. In the case of CE using imidazole as co-ion, Li was detected in CE by indirect detection. In view of no interference from Al, samples were analyzed without any matrix separation. The CE method was used successfully for sample analysis and results were compared with IC results.     

In-column fiber-optic laser-induced fluorescence detection for CE

A highly sensitive in-column fiber-optic LIF detector for CE has been constructed and evaluated. In this detection system, a 457-nm diode-pumped solid-state blue laser was used as the excitation light source and an optical fiber (40 mum od) was used to transmit the excitation light. One end of the optical fiber was inserted into the separation capillary and was in situ positioned at the detection window. The other end of the fiber was protruded from the capillary to capture the excitation light beam from the blue laser. Fluorescence emission was collected by a 40 x microscope objective, focused on a spatial filter, and passed through a yellow color filter before reaching the photomultiplier tube. The present CE-fluorescence detection is a simple and compact optical system. It reduces the laser scattering effect from the capillary and fiber as compared to the conventional LIF detection for CE. Its utility was successfully demonstrated by the separation and determination of D-penicillamine labeled with naphthalene-2,3-dicarboxaldehyde. The detection limit was 0.8 nM (S/N = 3). The present detection scheme has been proven to be attractive for sensitive fluorescence detection for CE.     

On-column detection of multiphoton-excited fluorescence in CE using hyphenated cylindrical-square capillaries

Multiphoton-excited fluorescence (MPEF) is a complementary and useful mode of LIF detection in CE with advantages of ultra-low mass detectability and spectral excitability, but it is currently quite limited by its end-column configuration. In this article, we demonstrate a novel strategy of on-column schemes that can greatly facilitate MPEF detection in CE. FITC-labeled amine species were used as the model samples for the evaluation and comparison of those detection scenarios. By using the square capillary instead of the conventional cylindrical one, the on-column MPEF could be readily achieved, with detection sensitivity of 0.72 microM that was comparable with the end-column mode. However, this strategy unfavorably reduced separation efficiency. The theoretical plate number on averaging all the sample peaks was significantly decreased from 283,000 to 19,000/m. To minimize such an influence, a short square capillary acting as an on-column MPEF detection cell was then mounted to a long cylindrical capillary responsible for the CE separation. Results indicated that both high separation efficiency (240,000/m) and better detectability (0.42 microM) were realized simultaneously by using this binary-capillary configuration. Quantitative analysis was performed under the optimized detector configuration and revealed a linear dynamic range of 2 orders of magnitude, with mass detection limit down to the mid-yottomole level.     

Separation of non-UV-absorbing synthetic polyelectrolytes by CE with contactless conductivity detection

A specific method for the separation and detection of non-UV-absorbing polyelectrolytes has been developed. The analysis of such polyelectrolytes by liquid chromatography is nearly impossible due to strong ionic interactions and charge density effects. CE makes use of these charge density effects and thus enables for proper separation. A capacitively coupled contactless conductivity detector has been applied for the detection in CE. A low molar mass poly(acrylic acid) sodium salt standard (PAA1.3k) was separated in free solution CE and detected with the contactless conductivity detector. Different amphoteric electrolytes have been tested for their applicability as BGE for the separation of polyelectrolytes with conductivity detection. It has been shown that the best detection results are obtained with an arginine-sorbate buffer.