Electrochemiluminescent determination of L-cysteine with a flow-injection analysis system.

A flow-injection electrochemiluminescent method for L-cysteine determination has been developed based on its enhancement of the electrochemiluminecence of luminol at a glassy carbon electrode. This method is simple and sensitive for cysteine determination. Under the selected experimental parameters, the linear range for cysteine concentration was 1.0 x 10(-6) - 5.0 x 10(-5) mol/l, and the detection limit was 0.67 micromol/l (S/N = 3). The relative standard deviation for 11 measurements of 1.0 x 10(-5) mol/l cysteine was 4.5%. The proposed method has been applied to the detection of cysteine in pharmaceutical injections with satisfactory results.     

Spectrofluorimetric flow injection method for the individual and successive determination of L-cysteine and L-cystine in pharmaceutical and urine samples.

A flow injection configuration is proposed for the determination of L-cysteine and L-cystine individually and for mixtures of both analytes. The procedure is based on the rapid oxidation of L-cysteine by thallium(III) with concomitant formation of fluorescent thallium(I). The inclusion of a selecting valve and of a copper-coated cadmium column in the configuration allows the successive determination of two analytes. Linear calibration graphs were obtained between 5 x 10(-6) and 5 x 10(-5) mol dm-3 of L-cysteine and between 2 x 10(-6) and 2 x 10(-5) mol dm-3 of L-cystine. The applicability of the method to the determination of L-cysteine and L-cystine in pharmaceutical preparations was demonstrated by investigating the effect of potential interferents and by the analysis of commercial preparations. The method was successfully applied to the determination of L-cysteine and L-cystine in urine samples.     

Determination of thallium(I) by flotation-spectrophotometric method using iodide and rhodamine B.

A method for the trace amount determination of Tl(I), via its preconcentration, is proposed. The method is based on the reaction of iodide, Tl(I) and Rhodamine B in a weakly acidic medium. In this process an ion-associated complex is formed, which is floated at the interface of aqueous-cyclohexane layers. Various amounts of Tl(I) by a subsequent separation and dissolution of the floated complex in methanol could be determined, spectrophotometrically. Beer's law was obeyed for the Tl(I) content in the range of (0.8-8.0) x 10(-7) mol l(-1) with a correlation coefficient of 0.9974. The conditional molar absorptivity was found to be 1.0 x 10(6) l mol(-1) cm(-1) at 560 nm, which indicated the considerable sensitivity of the procedure. The detection limit (DL) was 4.7 x 10(-8) mol l(-1) and the RSD (n = 5) for 4 x 10(-7) mol l(-1) of Tl(I) was 3.34%. None of the alkaline cations was interfered, and the interference of many other metal ions was eliminated via ion-exchange separation using a cation-exchanger resin, Amberlite IR-120, before the flotation step. The reliability of the procedure was confirmed by determining the Tl(I) contents of synthetic laboratory waste water by both flotation spectrophotometry and graphite furnace atomic absorption spectrometry (GFAAS). The recovery was 92.3-95.4% for 1 x 10(-7) and 4 x 10(-7) mol l(-1), respectively. The precision and accuracy of the results were comparable via F and t tests at the 95% confidence level.     

Flotation-spectrophotometric determination of mercury in water samples using iodide and ferroin.

This paper describes a simple and highly selective method for separation, preconcentration and spectrophotometric determination of trace amounts of mercury. The method is based on the flotation of an ion-associate of HgI4(2-) and ferroin between aqueous and n-heptane interface at pH 5. The ion-associate was then separated and dissolved in acetonitrile to measure its absorbance. Quantitative flotation of the ion-associate was achieved when the volume of the water sample containing Hg(II) was varied over 50 - 800 ml. Beer's law was obeyed over the concentration range of 3.2 x 10(-8) - 9.5 x 10(-7) mol l(-1) with an apparent molar absorptivity of 1 x 10(6) l mol(-1) cm(-1) for a 500 ml aliquot of the water sample. The detection limit (n = 25) was 6.2 x 10(-9) mol l(-1), and the RSD (n = 5) for 3.19 x 10(-7) mol l(-1) of Hg(II) was 1.9%. A notable advantage of the method is that the determination of Hg(II) is free from the interference of the almost all cations and anions found in the environmental and waste water samples. The determination of Hg(II) in tap, synthetic waste, and seawater samples was carried out by the present method and a well-established method of extraction with dithizone. The results were satisfactorily comparable so that the applicability of the proposed method was confirmed in encountering with real samples.     

Platinum particles-modified electrode for HPLC with pulsed amperometric detection of thiols in rat striatum

A new chemically modified electrode based on the immobilization of Pt particles is fabricated and exhibits electrocatalytic oxidation for L-cysteine (L-Cys), glutathione (GSH) and penicillamine (PEN) with relatively high sensitivity. It is also adaptable to HPLC for pulsed amperometric detection (PAD) of these thiols. PAD largely improves the detection sensitivity because the alternated polarizations can effectively clean and reactivate the electrode surface. It is shown that the peak currents of L-Cys, GSH and PEN are linear to their concentrations, with the calculated detection limit of 1.1 x 10(-7), 1.8 x 10(-7) and 3.8 x 10(-7) mol L(-1), respectively (S/N = 3). The method has been successfully applied to assess the contents of L-Cys and GSH in rat striatal microdialysates. The average contents of the two analytes in rat striatum are 2.6 x 10(-6) and 2.8 x 10(-6) mol L(-1), respectively.     

Spectrophotometric determination of fluoxetine by batch and flow injection methods

A rapid, simple, and accurate spectrophotometric method is presented for the determination of fluoxetine by batch and flow injection analysis methods. The method is based on fluoxetine competitive complexation reaction with phenolphthalein-beta-cyclodextrin (PHP-beta-CD) inclusion complex. The increase in the absorbance of the solution at 554 nm by the addition of fluoxetine was measured. The formation constant for fluoxetin-beta-CD was calculated by non-linear least squares fitting. Fluoxetine can be determined in the range 7.0 x 10(-6)-2.4 x 10(-4) mol l(-1) and 5.0 x 10(-5)-1.0 x 10(-2) mol l(-1) by batch and flow methods, respectively. The limit of detection and limit of quantification were respectively 4.13 x 10(-6) mol l(-1) and 1.38 x 10(-5) mol l(-1) for batch and 2.46 x 10(-5) mol l(-1) and 8.22 x 10(-5) mol l(-1) for flow method. The sampling rate in flow injection analysis method was 80+/-5 samples h(-1). The method was applied to the determination of fluoxetine in pharmaceutical formulations and after addition to human urine samples.     

Carbon paste electrode for trace zirconium(IV) determination by adsorption voltammetry.

A very sensitive and selective procedure was developed for trace measurement of zirconium based on the cathodic adsorptive stripping voltammetry of the zirconium-alizarin red S(ARS) complex at a carbon paste electrode (CPE). The 2nd-order derivative linear scan voltammograms of the zirconium-ARS complex were recorded by a model JP-303 polarographic analyzer from 0.0 to -1.0 V (vs. SCE). Optimal analytical conditions were found to be: an acetic acid (0.1 mol l(-1))-potassium biphthalate (0.08 mol l(-1)) buffer solution (pH 4.8) containing 4.0 x 10-6 mol l(-1) ARS; accumulation potential, 0.0 V; accumulation time, 180 or 90 s; rest time, 10 s; scan rate, 250 mV s(-1). The results showed that the complex can be adsorbed on the surface of the CPE, yielding one peak at -0.51 V, corresponding to the reduction of ARS in the complex at the electrode. The detection limit was found to be 1.0 x 10(-10) mol l(-1) (S/N = 3) for 240 s accumulation. The linear range was 2.0 x 10(-10)-4.0 x 10(-7) mol l(-1). The developed method was applied to the determination of trace zirconium in the ore samples with satisfactory results.     

Chemiluminescence flow injection analysis of 1,3-dichloro-5,5-dimethylhydantoin in swimming pool water

A new chemiluminescence (CL) flow-injection method is proposed for the determination of 1,3-dichloro-5,5-dimethylhydantoin (DDH). The method is based on the chemiluminescent reaction of DDH and luminol-H(2)O(2) in an alkaline medium (pH 12.0-12.5). The concentration of the analyte shows a good linear relationship with the produced luminescence intensity in the range of 3.0x10(-8) to 8.0x10(-6) mol l(-1). The detection limit of the proposed method is 1.0x10(-8) mol l(-1) and the relative standard deviation (R.S.D.) is 4.7% (n=5) at 5.0x10(-7) mol l(-1). This method was successfully applied to the determination of trace amounts of this disinfectant in water samples obtained from five different swimming pools. Satisfying recovery values were also obtained.     

Evaluation of luminol-H(2)O(2)-KIO(4) chemiluminescence system and its application to hydrogen peroxide, glucose and ascorbic acid assays

A novel chemiluminescence (CL) system was evaluated for the determination of hydrogen peroxide, glucose and ascorbic acid based on hydrogen peroxide, which has a catalytic-cooxidative effect on the oxidation of luminol by KIO(4). Hydrogen peroxide can be directly determined by luminol-KIO(4)-H(2)O(2) CL system. The detection limit was 3.0x10(-8) mol l(-1) and the calibration graph was linear over the range of 2.0x10(-7)-6.0x10(-4) mol l(-1). The relative standard deviation of H(2)O(2) was 1.1% for 2.0x10(-6) mol l(-1) (N=11). Glucose was indirectly determined through measuring the H(2)O(2) generated by the oxidation of glucose in the presence of glucose oxidase at pH 7.6. The present method provides a source for H(2)O(2), which, in turn, coupled with the luminol-KIO(4)-H(2)O(2) CL reaction system. The CL was linearly correlated with glucose concentration of 0.6-110 mug ml(-1). The relative standard deviation was 2.1% for 10 mug ml(-1) (N=11). Detection limit of glucose was 0.08 mug ml(-1). Ascorbic acid was also indirectly determined by the suppression of luminol-KIO(4)-H(2)O(2) CL system. The calibration curve was linear over the range of 1.0x10(-7)-1.0x10(-5) mol l(-1) of ascorbic acid. The relative standard deviation was 1.0% for 8.0x10(-7) mol l(-1) (N=11). Detection limit of ascorbic acid was 6.0x10(-8) mol l(-1). These proposed methods have been applied to determine glucose, ascorbic acid in tablets and injection.     

Synthesis of a novel chemiluminescent reagent for the determination of hydrogen peroxide in snow waters

7-(4,6-Dichloro-1,3,5-triazinylamino)-4-methylcoumarin (DTMC) was synthesized as a completely new chemiluminescent reagent, and with it a novel chemiluminescence method was developed for the determination of hydrogen peroxide in the absence of any added catalyst or co-oxidant. The chemiluminescence intensity of the DTMC-H(2)O(2) system could be enhanced by the addition of cation surfactants. The chemiluminescence intensity was directly proportional to the concentration of H(2)O(2) in the range 1.0 x 10(-7)-4.0x10(-4) mol l(-1), and the detection limit was 4.0 x 10(-8) mol l(-1). The relative S.D. was 4.9% for 1.0 x 10(-6) mol l(-1) of H(2)O(2) (n=10). The selectivity of this method was high, and most of the transition metal ions have no effect on the determination. The proposed method has been applied to the determination of trace amounts of hydrogen peroxide in snow water. A possible mechanism of the chemiluminescence reaction is also discussed.     

Permanganate-based chemiluminescence analysis of ferulic acid using flow injection.

A simple, sensitive and rapid flow-injection chemiluminescence method has been developed for the determination of ferulic acid based on the chemiluminescence reaction of ferulic acid with potassium permanganate in a nitric acid medium. A strong chemiluminescence signal was observed when ferulic acid was injected into an acidic potassium permanganate solution in a flow-cell. The present method allowed the determination of ferulic acid in the concentration range of 6.0 x 10(-6) to 2.0 x 10(-4) mol l(-1); the detection limit (3sigma) for ferulic acid was 9.6 x 10(-8) mol l(-1). The relative standard deviation was 1.0% for 11 replicate analyses of 2.0 x 10(-4) mol l(-1) ferulic acid. The proposed method was applied to the determination of ferulic acid in real samples with satisfactory results. Moreover, the reaction mechanism of the chemiluminescence system was primarily considered.     

Determination of morphine in process streams by sequential injection analysis with chemiluminescence detection

A procedure for the determination of morphine in process streams by sequential injection analysis based on the chemiluminescence reaction of morphine with acidic potassium permanganate in the presence of sodium hexametaphosphate is presented. The chemiluminescence emission has been monitored using an in-house detection system which consisted of a fibre optic flowthrough cell and a sensitive, low dark current, photomultiplier tube. The calibration graph (range 2 x 10(-8) to 1 x 10(-4) mol/l) was not linear over the entire range of concentration, with a polynomial equation of best fit of y = 1.0 x 10(15) x(3) - 2.2 x 10(11) x(2) + 1.3 x 10(7) x - 8.3. The calibration function approximates linearity over the concentration range 2.5 x 10(-6) to 3.0 x 10(-5) mol/l where the slope of the log-log plot is 1.09 +/- 0.16. The detection limit was estimated at about 10(-8) mol/l from the response of the lowest calibration standard (2.5 x 10(-8) mol/l) which gave a signal to noise ratio of 3 : 1. Although the structurally related codeine did not interfere significantly the results suggest that this method may be susceptible to matrix effects, dependent on the location of sampling from the process stream.     

Pulse injection analysis with chemiluminescence detection: determination of citric acid using tris-(2,2'-bipyridine) ruthenium(II)

A chemiluminescence method for the determination of citric acid was developed. The method is based on the enhancement of citric acid on the chemiluminescence light emission of tris-(2,2'-bipyridine)ruthenium(II). In the presence of tris-(2,2'-bipyridine)ruthenium(II), upon the addition of Ce(IV), resulted in intense light emission. The emission intensity is greatly enhanced by the presence of citric acid. The linear range and detection limit of citric acid are 3.0x10(-8) approximately 6.0x10(-6) mol l(-1) and 3.0x10(-8) mol l(-1), respectively. The precision of the proposed method is determined by analyzing 11 samples containing 1.0x10(-7) mol l(-1) citric acid. The relative standard deviation is 3.0%. The enhanced mechanism of citric acid was studied. The method was evaluated by carrying out an interference study with common ions and compounds, by a recovery study and by analysis of human urine and orange juice. A satisfactory result was obtained.     

A fluorescence quenching method for the determination of nitrite with Rhodamine 110

A simple and sensitive fluorescence quenching method for the determination of trace nitrite has been developed. The method is based on the reaction of Rhodamine 110 with nitrite in acidic medium to form a new compound, which has much lower fluorescence. The optimum experimental conditions were studied. The linear range was obtained at a nitrite concentration of 1.0 x 10(-8)-3.0 x 10(-7)mol l(-1) with a detection limit of 7.0 x 10(-10) mol l(-1) (S/N=3). The proposed method has been successfully applied to the determination of nitrite in tap water and lake water without extraction.     

Determination of the herbicide desmetryne in organised media by adsorptive stripping voltammetry

An electroanalytical method for the determination of the herbicide desmetryne at nanomolar levels in dispersed media, based on adsorptive stripping voltammetry, is reported. The adsorption of desmetryne at the hanging mercury drop electrode was checked both in micellar solutions, where the anionic surfactant sodium pentanesulphonate was chosen as the most suitable surfactant agent, and in oil-in-water emulsions prepared with ethyl acetate as the organic solvent. In a micellar medium formed with 0.02% sodium pentanesulphonate and with 0.1 mol l(-1) Britton-Robinson buffer (pH 1.5), the herbicide could be determined over the 1.0 x 10(-8)-4.0 x 10(-7) mol l(-1) concentration range, when an accumulation potential of -0.70 V was applied for 50 s. On the other hand, in an oil-in-water emulsion formed with 2% ethyl acetate and 0.04% sodium pentanesulphonate as emulsifying agent in 0.1 mol l(-1) HClO(4), desmetryne could be determined over the 2.0 x 10(-9)-1.0 x 10(-7) mol l(-1) concentration range. The limits of detection were 2.4 x 10(-9) and 4.2 x 10(-10) mol l(-1) in micellar and emulsified media, respectively, with R.S.D.s (n=10) 3.6 and 3.7%. The degree of interference from some other s-triazines on the desmetryne differential pulse response was also evaluated. Finally, the method developed in emulsified medium was applied to the determination of desmetryne in spiked apple juice.     

Fluorimetric determination of ascorbic acid in vitamin C tablets using methylene blue

In this study, a simple and sensitive fluorimetric method was described for the determination of Ascorbic Acid (AA). The procedure is based on the reaction between AA and Methylene Blue (MB). The fluorescence intensity of MB was measured at excitation and emission of 664 and 682 nm, respectively. MB concentration was decreased as a function of decreasing fluorescence intensity due to forming colorless form of MB (Leuco-MB) in the reaction between AA and MB. A linear relationship was obtained between the decreasing fluorescence intensity and the concentration of AA in the range of 3.0 x 10(-7)-6.0 x 10(-6) mol.l(-1). The detection limit was 2.5 x 10(-7) mol.l(-1). The proposed method was applied successfully for the determination of AA in Vitamin C tablets.     

2-Amino-5,7-dimethyl-1,8-naphthyridine as a fluorescent reagent for the determination of nitrite

A new fluorescent reagent 2-amino-5,7-dimethyl-1,8-naphthyridine (ADMND) was proposed for the determination of trace nitrite. The reaction is based on the diazotization of naphthyridine amine with nitrite to form a diazonium salt that hydrolyzed when boiling to give hydroxyl group substituted naphthyridine. Fluorescence quenching degree of ADMND by nitrite ion is linear in the nitrite concentration range of 1 x 10(-7) to 2.5 x 10(-6)mol l(-1) with a detection limit of 4.06 x 10(-8)mol l(-1). Reaction and determination acidity for nitrite is the same which made the method much simpler compared with the widely accepted fluorescence method with DAN as a fluorescence reagent.     

Stopped-flow spectrophotometric determination of hydrogen peroxide with hemoglobin as catalyst

A rapid and sensitive method was proposed for the determination of hydrogen peroxide based on the catalytic effect of hemoglobin using o-phenylenediamine as the substrate. Stopped-flow spectrophotometric method was used to study the kinetic behavior of the oxidation reaction. The catalytic effectiveness of hemoglobin was compared with other four kinds of catalysts. The initial rate of the formation of the reaction product 2,3-diaminophenazine at the wavelength of 425 nm was monitored, permitting a detection limit of 9.2x10(-9) mol/l H(2)O(2). A linear calibration graph was obtained over the H(2)O(2) concentration range 5.0x10(-8)-3.5x10(-6) mol/l, and the relative standard deviation at a H(2)O(2) concentration of 5.0x10(-7) mol/l was 2.08%. Satisfied results were obtained in the determination of H(2)O(2) in real samples by this method.     

Spectrophotometric determination of hydrogen peroxide by using the cleavage of Eriochrome black T in the presence of peroxidase

A new hydrogen donor for peroxidase, Eriochrome black T, was reported for the first time. Steady-state catalytic velocity depends upon enzyme and substrate concentrations, and a Michaelis-Menten K(m) value of 1.72x10(-5) mol l(-1) and a V(max) value of 4.43x10(-3) s(-1) were measured at pH 8.6. Trace amount of hydrogen peroxide (2x10(-7)-1.0x10(-5) mol l(-1)) was determined in aqueous solution by using the cleavage of Eriochrome black T catalyzed by peroxidase. The method is simple and practical, with high sensitivity and enzymatic activity.     

Differential pulse anodic stripping voltammetric determination of traces of copper with a tobramycin-Nafion modified electrode.

A Nafion-modified glassy carbon electrode incorporated with tobramycin for the voltammetric stripping determination of Cu2+ has been explored. The electrode was fabricated by tobramycin containing Nafion on the glassy carbon electrode surface. The modified electrode exhibited a significantly increased sensitivity and selectivity for Cu2+ compared with a bare glassy carbon electrode and the Nafion modified electrode. Cu2+ was accumulated in HAc-NaAc buffer (pH 4.6) at a potential of -0.6 V (vs. SCE) for 300 s and then determined by differential pulse anodic stripping voltammetry. The effects of various parameters, such as the mass of Nafion, the concentration of tobramycin, the pH of the medium, the accumulation potential, the accumulation time and the scan rate, were investigated. Under the optimum conditions, a linear calibration graph was obtained in the concentration range of 1.0 x 10(-9) to 5.0 x 10(-7) mol l(-1) with a correlation coefficient of 0.9971. The relative standard deviations for eight successive determinations were 4.3 and 2.9% for 1.0 x 10(-8) and 2.0 x 10(-7) mol l(-1) Cu2+, respectively. The detection limit (three times signal to noise) was 5.0 x 10(-10) mol l(-1). A study of interfering substances was also performed, and the method was applied to the direct determination of copper in water samples, and also in analytical reagent-grade salts with satisfactory results.