Quantum-chemical simulation of the mechanisms of stereoisomerism of tetracoordinated Ni(II) complexes

Mechanism of stereoisomerism at the rotation of chelate rings of the bis-chelate tetracoordinated Ni(II) complexes is studied by the method of density functional theory [B3LYP/6-311++G(d,p)]. The reaction is shown to proceed with the change in multiplicity. Calculated energy barriers are consistent with the experimental data. The results obtained demonstrate the feasibility of the chosen approach for the theoretical simulation of intramolecular rearrangements of the transition metal complexes proceeding with the change in the system spin state.     

Catalytic activity of tetracoordinated stereochemically flexible Ni(II) bis(5-thiopyrazol-4-aldiminates) in the dimerization of propylene

The catalytic activity of Ni(II) bis-(5-thiopyrazol-4-aldiminates) was found to be related to the stereochemical flexibility of these compounds in the dimerization of propylene. The propylene conversion decreases with decreasing stereochemical flexibility of the complexes resulting from an increase in the bulk of the substituent at the coordinated nitrogen atom of the NiN₂S₂ chelate ring.Institute of Inorganic and Physical Chemistry, Academy of Sciences of Azerbaidjan, 370143 Baku. Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 11, pp. 2667–2670, November, 1992.     

The kinetics and the mechanism of the thermal reaction between sulfurtetrafluoride (SF4) and trifluoromethylhypofluorite (CF3OF)

The kinetics of the thermal reaction between SF₄, and CF₃OF has been studied between 142°C and 185°C. The reaction was found to be homogeneous and the only products formed are equimolecular amounts of SF₆ and CF₃O₂CF₃ and smaller amounts of CF₃OSF₅. The reaction mechanism was not affected by the total pressure, the oxygen pressure, or by the buildup of products. The experimental data can be explained by the following mechanism: The rate constants can be expressed as      

Gas-phase combination reactions of SF4 and SF5 with F in plasmas of SF6

Reactions of both SF₄ and SF₅ with F have been studied at 295 K in a gas-flow reactor sampled by a mass spectrometer. The rate coefficient for the combination reaction of F with SF₄ to produce SF₅ was found to increase from (0.9 to 3.0)×10^–12 cm³ s^–1 when the helium bath gas number density was increased from (2 to 26)×10¹⁶ cm^–3. The values obtained here are three orders of magnitude higher than a recent estimate of the high-pressure value based on the modelling of photochemical studies. The experimental results have been compared with RRKM and master equation calculations in which a simplified Gorin model has been used to determine the structure of the transition state. These calculations show that reasonable agreement can be obtained between the experimental data and the calculation if a small (2 KJ/mol) activation energy is assumed. The rate coefficient for the reaction between SF₅ and F to produce SF₆ was found to be independent of helium bath gas number density within the range given above. The value obtained for the rate coefficient was 9×10^–12 cm³ s^–1 with an uncertainty of a factor of 2. This value is close to that of 1×10^–11 cm³ s^–1 computed from the simplified Gorin model and to the value of 1.7×10^–11 cm³ s^–1 deduced from modelling of photochemical experiments.     

Synthesis and structure of tetracoordinated nickel(II) complexes of deprotonated chelated aminoazo ligands: X-ray crystal structure of bis[1-isopropyl-3-methyl-4-(4-methylphenylazo)-5-(4-methoxyphenylamidato)pyrazole] nickel(II)

Summary Tetracoordinate nickel(II) complexes NiL₂ derived from the deprotonated forms of aminoazoligands HL were prepared and investigated by spectroscopy and magnetic susceptibility measurements. The magnetic moments, which lie in the 3.1–3.6 B.M. range correspond to the occurrence both in solution and in the solid state of the high spin (S = 1) form and a tetrahedral configuration at the metal centre. The u.v. spectra exhibit three ligand field bands at 1020–1280 nm characteristic of high spin nickel(II) complexes. The large isotropic chemical shifts found in the ¹H n.m.r. spectra are consistent with partial delocalization of unpaired electron spin density to the ligand HOMO. The X-ray single crystal structure of NiL ₂ ⁴ [L⁴= 1-isopropyl-3-methyl-4-(4-methylphenylazo)-5-(4-methoxyphenylamino)-pyrazole] reveals that the metal is coordinated by four nitrogen atoms in tetrahedral configuration with an angle of 90° between the N(1)NiN(2) and N(6)NiN(7) planes belonging to the different almost planar metallocycles. The rates of RS interconversion of the tetrahedral configuration for NiL ₂ ⁴ and NiL ₂ ⁵ [L⁵ = 1-isopropyl-3-methyl-4-phenylazo-d ₅-5-(4-methoxyphenylamino)pyrazole] are slow on the n.m.r. timescale. In contrast to NiL ₂ ¹ -Ni ₂ ⁶ , NiL ₂ ⁷ ], which contains coordinated NH-groups instead of NAr-groups, is planar.     

Isolation of the saddle and crown conformers of cyclotriveratrylene (CTV) oxime

The oxime of cyclotriveratrylene (CTV) has been prepared and the individual crown and saddle conformers were isolated and characterized. The equilibrium constant was measured in CDCl₃ and in DMSO-d₆ and was shown to favor the crown conformer by an order of magnitude in DMSO-d₆, relative to an approximately equal mixture at equilibrium in CDCl₃. The time course for interconversion of the saddle to the crown was measured by ¹H NMR and the t_1/2 of the saddle was determined to be 2.45 h in CDCl₃ at 25 °C, and 3.71 h in DMSO-d₆.     

Determination of energy minima and saddle points using multireference configuration interaction methods in combination with reduced gradient following: the S(0) surface of H(2)CO and the T(1) and T(2) surfaces of acetylene

The implementation of the reduced gradient following (RGF) method into the COLUMBUS quantum-chemical program system is reported using the newly developed analytic MR-CISD/AQCC gradient feature. By this combination a very useful tool has been developed for general searches of stationary points on ground- and excited-state energy surfaces. This procedure is applied to the S(0) surface of H(2)CO and the T(1) and T(2) surfaces of acetylene. For H(2)CO we investigated three minima (formaldehyde, s-trans, and s-cis hydroxycarbene) and five saddle points. For the T(1) and T(2) states of acetylene the cis- and trans-minima and the planar and nonplanar saddle points were computed.     

Magnetically induced current densities in Al4 (2-) and Al4 (4-) species studied at the coupled-cluster level

Magnetically induced current densities in the four-membered rings of Al4(2-) and Al4(4-) species have been calculated at the coupled-cluster singles and doubles (CCSD) level by applying the recently developed gauge-including magnetically induced current (GIMIC) method. The strength of the ring-current susceptibilities were obtained by numerical integration of the current densities passing through a cross section perpendicular to the Al4 ring. The GIMIC calculations support the earlier notion that Al4 (2-) with formally two pi electrons sustains a net diatropic ring current. The diatropic contribution to the ring-current susceptibility is carried by the electrons in both the sigma (16.7 nAT) and the pi (11.3 nAT) orbitals. The induced ring current in the Al4 (4-) compounds, with four pi electrons, consists of about equally strong diatropic sigma and paratropic pi currents of about 14 and -17 nAT, respectively. The net current susceptibilities obtained for Al4Li-, Al4Li2, Al4Li3(-), and Al4Li4 at the CCSD level using a triple-zeta basis set augmented with polarization functions are 28.1, 28.1, -5.9, and -3.1 nAT, respectively. The corresponding diatropic (paratropic) contributions to the ring-current susceptibilities are 32.4 (0.0), 36.7 (0.0), 18.9 (-19.9), and 18.6 (-16.8) nAT, respectively. For the Al4(2-) and Al4(4-) species, the net currents circling each Li+ cation is estimated to 4.3 and 2.4 nAT, respectively.     

Synthesis of ribonucleosides of 4(5)-cyano-5(4)-methylimidazole and related 4-substituted-5-methylimidazole ribosides

4-Cyano-1-(2,3,5-tri-O-acetyl-β-D-ribofuranosyl)-5-methylimidazole ( 4 ) and its corresponding 5-cyano-4-methyl substituted isomer ( 5 ) have been obtained by ribosylation of 4(5)-cyano-5(4)-methylimidazole ( 3 ) via the mercuric cyanide method or by ribosylation of the trimethylsilyl derivative of 3 . Treatment of 4 with methanolic ammonia, ammonium chloride in liquid ammonia and potassium hydrosulfide provided 4-cyano-1-β-D-ribofuranosyl-5-methylimidazole ( 6 ), 1-β-D-ribofuranosyl-5-methylimidazole-4-carboxamide ( 2 ) and 1-β-D-ribofuranosyl-5-methylimidazole-4-thiocarboxamide ( 11 ) respectively. Reaction of 6 with hydroxylamine afforded the corresponding 4-carboxamidoxime substituted nucleoside ( 13 ) which on catalytic reduction in the presence of ammonium chloride, was transformed into 1-β-D-ribofuranosyl-5-methylimidazole-4-carboxamidine ( 14 ) as hydrochloride salt.     

Density functional embedded cluster study of Cu(4), Ag(4) and Au(4) species interacting with oxygen vacancies on the MgO(001) surface

Cu(4), Ag(4), and Au(4) species adsorbed on an MgO(001) surface that exhibits neutral (F(s)) and charged (F(s) (+)) oxygen vacancies have been studied using a density functional approach and advanced embedding models. The gas-phase rhombic-planar structure of the coinage metal tetramers is only moderately affected by adsorption. In the most stable surface configuration, the plane of the tetramers is oriented perpendicular to the MgO(001) surface; one metal atom is attached to an oxygen vacancy and another one is bound to a nearby surface oxygen anion. A very similar structural motif was recently found on defect-free MgO(001), where two O(2-) ions serve as adsorption sites. Following the trend of the interactions with the regular MgO(001) surface, Au(4) and Cu(4) bind substantially stronger to F(s) and F(s) (+) sites than Ag(4). This stronger adsorption interaction at oxygen vacancies, in particular at F(s), is partly due to a notable accumulation of electron density on the adsorbates. We also examined the propensity of small supported metal species to aggregate to adsorbed di-, tri- and tetramers. Furthermore, we demonstrated that core-level ionization potentials offer the possibility for detecting experimentally supported metal tetramers and characterizing them structurally with the help of calculated data.     

Substituent effects in formally quintuple-bonded ArCrCrAr compounds (Ar = terphenyl) and related species

The effects of different terphenyl ligand substituents on the quintuple Cr-Cr bonding in arylchromium(I) dimers stabilized by bulky terphenyl ligands (Ar) were investigated. A series of complexes, ArCrCrAr (1-4; Ar = C6H2-2,6-(C6H3-2,6-iPr2)2-4-X, where X = H, SiMe3, OMe, and F), was synthesized and structurally characterized. Their X-ray crystal structures display similar trans-bent C(ipso)CrCrC(ipso) cores with short Cr-Cr distances that range from 1.8077(7) to 1.8351(4) A. There also weaker Cr-C interactions [2.294(1)-2.322(2) A] involving an C(ipso) of one of the flanking aryl rings. The data show that the changes induced in the Cr-Cr bond length by the different substituents X in the para positions of the central aryl ring of the terphenyl ligand are probably a result of packing rather than electronic effects. This is in agreement with density functional theory (DFT) calculations, which predict that the model compounds (4-XC6H4)CrCr(C6H4-4-X) (X = H, SiMe3, OMe, and F) have similar geometries in the gas phase. Magnetic measurements in the temperature range of 2-300 K revealed temperature-independent paramagnetism in 1-4. UV-visible and NMR spectroscopic data indicated that the metal-metal-bonded solid-state structures of 1-4 are retained in solution. Reduction of (4-F3CAr')CrCl (4-F3CAr' = C6H2-2,6-(C6H3-2,6-iPr2)2-4-CF3) with KC8 gave non-Cr-Cr-bonded fluorine-bridged dimer {(4-F3CAr')Cr(mu-F)(THF)}2 (5) as a result of activation of the CF3 moiety. The monomeric, two-coordinate complexes [(3,5-iPr2Ar*)Cr(L)] (6, L = THF; 7, L = PMe3; 3,5-iPr2Ar* = C6H1-2,6-(C6H-2,4,6-iPr3)2-3,5-iPr2) were obtained with use of the larger 3,5-Pri2-Ar* ligand, which prevents Cr-Cr bond formation. Their structures contain almost linearly coordinated CrI atoms, with high-spin 3d5 configurations. The addition of toluene to a mixture of (3,5-iPr2Ar*)CrCl and KC8 gave the unusual dinuclear benzyl complex [(3,5-iPr2Ar*)Cr(eta3:eta6-CH2Ph)Cr(Ar*-1-H-3,5-iPr2)] (8), in which a C-H bond from a toluene methyl group was activated. The electronic structures of 5-8 have been analyzed with the aid of DFT calculations.     

Synthesis of 1,2-di-(4-pyridyl)ethylenediamine and related compounds

Hydrolysis of N,N'-diacyl-1,2-di(4-pyridyl)ethylenediamines 1 in aqueous sulfuric acid gave the corresponding imidazolines 3. 1,2-Di-(4-pyridyl)ethylenediamine 2 was prepared in 61 % yield by treating N,N'-di-t-butyl-oxycarbonyl-1,2-di(4-pyridyl)ethylenediamine 4 with trifluoroacetic acid or in 94% yield by the hydrolysis under basic conditions of N,N'-diphthaloylglycyl-1,2-di(4-pyridy)ethylenediamine 13.     

Kinetics of the thermal decomposition of bis-pentafluorosulfur trioxide(SF5O3SF5) in the presence of carbon monoxide

The thermal decomposition of SF₅O₃SF₅ in the presence of CO has been investigated between -9.8°C and + 9.9°C. Besides traces of S₂F₁₀, equimolecular amounts of SF₅O₂SF₅ and CO₂ are formed. The reaction is homogeneous. Its rate is proportional to the pressure of the trioxide and in dependent of the total pressure, the pressure of inert gases and of carbon monoxide: where k = k_1∞ = 10^16.32±0.40 exp(?25,300 ± 500 cal)/RT sec^?1. Consequently, In the presence of oxygen a sensitized CO₂ formation is observed. A mechanism is given which explains the experimental results.     

Matrix isolation IR spectroscopic and ab initio studies of C(3)N(-) and related species

Coupled cluster calculations were carried out for C(3)N(-), CCNC(-), C(3)N, CCNC, C(3)N(+), and C(3)O. They support the experimental identification of the C(3)N(-) ion by means of matrix isolation infrared (IR) spectroscopy. The anion was generated in electric discharges through the cyanoacetylene isotopomers HC(3) (14)N, HC(3) (15)N, and (2)HC(3)N, trapped in cryogenic rare gas matrices (Ne, Ar, Kr), and detected via its two most intense IR absorption bands, assigned to the nu(1) and nu(2) stretching vibrations. C(3)N(-) appears to be quite a stable anion, with a vertical detachment energy predicted to be as high as 4.42 eV. A large equilibrium electric dipole moment of 3.10 D facilitates the investigation of C(3)N(-) by microwave spectroscopy and radio astronomy. Various structural parameters and spectroscopic properties have been calculated for all tetra-atomic species considered.     

Synthesis of 4-vinylquinoline: Pyrolytic rearrangement of the 4-(1-hydroxyethyl)quinoline and related derivatives

The synthesis of 4-vinylquinoline has been carried out by means of the Wittig reaction between 4-quino-linecarbaldehyde and the methyl triphenylphosphonium ylide in dimethyl sulphoxide in good yield. Dehydration of the 4-(1-hydroxyethyl)quinoline and their xanthate derivative, give equimolar amounts of 4-ethylquinoline and 4-acetylquinoline while small amounts of 4-vinylquinoline were found. Dehydrochlorination of 4-(1-chloroethyl)quinoline in ethanol-sodium hydroxide provides 4-ethyl-3-ethoxyquinoline in good yield, but 4-vinylquinoline is a minor reaction product.     

Geometry of simple molecules. 2. Modeling the geometry of AX3E and AX2E2 molecules through the nonbonded interaction (NBI) model

A new conceptual model of molecular geometry is presented, called the nonbonded interaction (NBI) model. This model is applied to the geometries of the AX3E and AX2E2 (A = N, O, P, S, As, Se, or Te; X = H, F, Cl, Br, I, CH(3), tBu, CF3, SiH3, Sn(tBu)3, or SnPh3) molecule types. For these molecules, the NBI model can be quantified on the basis of a balance between terminal atom-terminal atom (X-X) interactions and lone pair-terminal atom (E-X) interactions. The empirically observed X-A-X angles range from 91.0 degrees (SeH2) to 180 degrees (O(Sn(tBu)3)2), and the NBI model predicts the X-A-X angle with a mean unsigned error of 1.0 degrees using the empirical A-X distance, 1.5 degrees using the LMP2/6-31G** A-X distance, and 1.1 degrees using the MMFF94 A-X distance. This level of precision compares well to the LMP2/6-31G**-predicted X-A-X angles and is significantly better than the MMFF94-predicted X-A-X angles. Terminal groups that are not sufficiently spherical (CF3, SiH3, and SnPh3) can still be addressed qualitatively by the NBI model, as can molecules with a mixture of terminal groups. The NBI model is able to explain, often quantitatively, the geometry of all of the molecules studied, without any additional postulates or extensive parametrization.     

Solid-phase extraction (SPE) assays to ascertain the mechanisms of retention of antimony species in several stationary phases

Liquid chromatography is the most suitable technique for antimony speciation in several types of samples. However, efficiency can be poor for some of these peaks, especially Sb(III) and Me₃SbCl₂ (TMSb). Weak and strong anion exchange stationary phases are mainly used for antimony speciation in several chromatographic conditions. The present study examines the possible contribution of the interaction between antimony species (Sb(III), Sb(V) and TMSb) and stationary phase support to the overall retention mechanism in their chromatographic separation. Several SPE cartridges, selected from those mainly used as support in anion exchange columns, were assayed. Sb (V) was quantitatively eluted from the PSDVB (polystyrene divinylbenzene) and SiO₂ phases, showing the absence of interaction. Sb (III) showed some interaction with the PSDVB phase; TMSb showed strong retention with all the cartridges studied and it was only eluted from the PSDVB phase.     

The interactions of added phenanthroline and triphenylphosphine ligands with the copper(I) tetrahydroborates (phen)Cu(BH4) and (phen)(PPh3)Cu(BH4): Probing the character of species in solution

Added free ligand, i.e. phenanthroline for (phen)CuBH₄ and either phenanthroline or triphenylphosphine for (phen)PPh₃CuBH₄, causes a progressive change in the mode of attachment of the η²–BH₄ moiety from that in the initial complexes to the formation in solution of ionic species of the type [(phen)₂Cu]⁺BH₄⁻ and [(phen)(PPh₃)₂Cu]⁺BH₄⁻, respectively. These changes were indicated by: (i) infrared spectroscopy, which showed both a gradual loss of signals attributed to ν(B–H_b) and δ(BH₂) and their replacement with spectra typical of ionic BH₄⁻ ion; (ii) an increase in the conductance measured that was consistent with a 1:1 electrolyte; (iii) chemical shift changes in the ¹¹B- and ³¹P-NMR signals associated with the BH₄⁻ and PPh₃ moieties, respectively and (iv) a relative increase in signal intensities of the ions detected by electrospray mass spectrometry.     

NMR elucidation of a novel (S)-pentacyclo-undecane bis-(4-phenyloxazoline) ligand and related derivatives

The NMR elucidation of a novel ligand (S)-pentacyclo-undecane bis-(4-phenyloxazoline) and related pentacyclo-undecane (PCU) derivatives is reported. Two-dimensional NMR proved to be a powerful technique in overcoming the difficulties associated with the elucidation of these compounds when only one-dimensional NMR data is utilized. A chiral substituent was introduced to both 'arms' of the PCU skeleton to produce derivatives 1-3. These derivatives display C(1) symmetry with all thecage atoms being nonequivalent. Owing to overlapping of peaks in the (1)H spectra, identification of these diastereomeric protons was very difficult. The (13)C spectra gave rise to clear splitting of the nonequivalent carbons. This is unusual compared to similar PCU derivatives with chiral substituents as splitting of all the diastereomeric cage carbons has not yet been reported. Nuclear Overhauser enhancement spectroscopy (NOESY) correlations of derivatives 1-3 confirm the different conformations of the molecule in which the side 'arms' occupy different orientations with respect to cage moiety.