Organobismuth compounds with the pincer ligand 2,6-(Me2NCH2)2C6H3: monoorganobismuth(III) carbonate, sulfate, nitrate, and a diorganobismuthenium(III) salt

The reaction of RBiCl(2) (1) [R = 2,6-(Me(2)NCH(2))(2)C(6)H(3)] with Na(2)CO(3) or Ag(2)SO(4) (1 : 1 molar ratio) gave RBiCO(3) (2) and RBiSO(4) (3), respectively. RBi(NO(3))(2) (4) was obtained from RBiCl(2) and AgNO(3) (1 : 2 molar ratio). The ionic complex [R(2)Bi][W(CO)(5)Cl] (6) was obtained from R(2)BiCl (5) and W(CO)(5)(THF), following an unusual chlorine transfer from bismuth to tungsten. Compounds 2-4 are partially soluble in water. The molecular structures of 2·0.5CH(2)Cl(2), 3, 4·H(2)O and 6 were established by single-crystal X-ray diffraction. The carbonate 2 and the sulfate 3 exhibit a polymeric structure based on bridging oxo anions, while for the compound 4 dimer associations are formed, with both bridging and terminal nitrate anions. Dimer associations, based on weak Cl···H interactions between the cation and the anion, were found in the crystal of 6.     

Bismuth coordination chemistry with allyl, alkoxide, aryloxide, and tetraphenylborate ligands and the {[2,6-(Me2NCH2)2C6H3]2Bi}+ cation

A series of bis(aryl) bismuth compounds containing (N,C,N)-pincer ligands, [2,6-(Me(2)NCH(2))(2)C(6)H(3)](-) (Ar'), have been synthesized and structurally characterized to compare the coordination chemistry of Bi(3+) with similarly sized lanthanide ions, Ln(3+). Treatment of Ar'(2)BiCl, 1, with ClMg(CH(2)CH═CH(2)) affords the allyl complex Ar'(2)Bi(η(1)-CH(2)CH═CH(2)), 2, in which only one allyl carbon atom coordinates to bismuth. Complex 1 reacts with KO(t)Bu and KOC(6)H(3)Me(2)-2,6 to yield the alkoxide Ar'(2)Bi(O(t)Bu), 3, and aryloxide Ar'(2)Bi(OC(6)H(3)Me(2)-2,6), 4, respectively, but the analogous reaction with the larger KOC(6)H(3)(t)Bu(2)-2,6 forms [Ar'(2)Bi][OC(6)H(3)(t)Bu(2)-2,6], 6, in which the aryloxide ligand acts as an outer sphere anion. Chloride is removed from 1 by NaBPh(4) to form [Ar'(2)Bi][BPh(4)], 5, which crystallizes from THF in an unsolvated form with tetraphenylborate as an outer sphere counteranion.     

Isomers of a dibismuthane, R2Bi-BiR2 [R = 2,6-(Me2NCH2)2C6H3], and unusual reactions with oxygen: formation of [R2Bi]2(O2) and R'R' 'Bi [R' = 2-(Me2NCH2)-6-{Me2N(O)CH2}C6H3; R' ' = 2-(Me2NCH2)-6-{O(O)C}C6H3

R2Bi-BiR2 [1; R = 2,6-(Me2NCH2)2C6H3], a dibismuthane that exists in different forms in the crystalline state, reacts in air with the formation of the peroxide [R(2)Bi]2(O2) (2) and partial oxidation of the pendant (dimethylamino)methyl groups, yielding the mononuclear bismuth complex R'R' 'Bi (3) [R' = 2-(Me2NCH2)-6-{Me2N(O)CH2}C6H3; R' ' = 2-(Me2NCH2)-6-{O(O)C}C6H3].     

Characterization of the sterically encumbered terphenyl-substituted species 2,6-Trip2H3C6Sn-Sn(Me)2C6H3-2,6-Trip2, an unsymmetric, group 14 element, methylmethylene, valence isomer of an alkene, its related lithium derivative 2,6-Trip2H3C6(Me)2Sn-Sn(Li)(Me)C6H3-2,6-Trip2, and the monomer Sn(t-Bu)C6H3-2,6-Trip2 (Trip = C6H2-2,4,6-i-Pr3)

The reaction of the recently reported sterically encumbered terphenyl tin(II) halide species Sn(Cl)C6H3-2,6-Trip2 (Trip = C6H2-2,4,6-i-Pr3), 1, with 1 equiv of MeLi or MeMgBr afforded 2,6-Trip2H3C6Sn-Sn(Me)2C6H3-2,6-Trip2, 2, which is the first stable group 14 element methylmethylene (i.e., CH3CH) analogue of ethylene (H2CCH2). Reaction of 1 with 1.5 equiv of MeLi yielded the stannylstannate species 2,6-Trip2H3C6(Me)2Sn-Sn(Li)(Me)-C6H3-2,6-Trip2, 3, whereas reaction of 1 with 1 equiv of t-BuLi gave the heteroleptic stannanediyl monomer Sn(t-Bu)C6H3-2,6-Trip2 (4). The compounds 2-4 were characterized by 1H, 13C (7Li, 3 only), and 119Sn NMR spectroscopy in solution and by UV-vis spectroscopy. The X-ray crystal structures of 2-4 were also determined. The formation of the stannylstannanediyl 2 instead of the expected symmetrical, valence isomer "distannene" form (Sn(Me)C6H3-2,6-Trip2)2, 6, is explained through the ready formation of LiSn(Me)2C6H3-2,6-Trip2, 5, which reacts rapidly with 1 to produce 2 which can then react with a further equivalent of MeLi to give 3. The stability of singly bonded 2 in relation to the formally doubly bonded 6 was rationalized on the basis of the difference in the strength of their tin-tin bonds. In contrast to the methyl derivatives, the reaction of 1 with t-BuLi proceeded smoothly to give the monomeric compound 4. Apparently, the formation of a t-Bu analogue of 5 was prevented by the more crowding t-Bu group. Compound 2 is also the first example of a stable molecule with bonding between a two-coordinate, bivalent tin and four-coordinate tetravalent tin. Both compounds 2 and 3 display large J 119Sn-119Sn couplings between their tin nuclei and the tin-tin bond lengths in 2 (2.8909(2) A) and 3 (2.8508(4) A) are relatively normal despite the presence of the sterically crowding terphenyl substituents.     

Synthesis and reactivity of Ir(I) and Ir(III) complexes with MeNH2, Me2C=NR (R = H, Me), C,N-C6H4{C(Me)=N(Me)}-2, and N,N'-RN=C(Me)CH2C(Me2)NHR (R = H, Me) ligands

Complexes [Ir(Cp*)Cl(n)(NH2Me)(3-n)]X(m) (n = 2, m = 0 (1), n = 1, m = 1, X = Cl (2a), n = 0, m = 2, X = OTf (3)) are obtained by reacting [Ir(Cp*)Cl(mu-Cl)]2 with MeNH2 (1:2 or 1:8) or with [Ag(NH2Me)2]OTf (1:4), respectively. Complex 2b (n = 1, m = 1, X = ClO 4) is obtained from 2a and NaClO4 x H2O. The reaction of 3 with MeC(O)Ph at 80 degrees C gives [Ir(Cp*){C,N-C6H4{C(Me)=N(Me)}-2}(NH2Me)]OTf (4), which in turn reacts with RNC to give [Ir(Cp*){C,N-C6H4{C(Me)=N(Me)}-2}(CNR)]OTf (R = (t)Bu (5), Xy (6)). [Ir(mu-Cl)(COD)]2 reacts with [Ag{N(R)=CMe2}2]X (1:2) to give [Ir{N(R)=CMe2}2(COD)]X (R = H, X = ClO4 (7); R = Me, X = OTf (8)). Complexes [Ir(CO)2(NH=CMe2)2]ClO4 (9) and [IrCl{N(R)=CMe2}(COD)] (R = H (10), Me (11)) are obtained from the appropriate [Ir{N(R)=CMe2}2(COD)]X and CO or Me4NCl, respectively. [Ir(Cp*)Cl(mu-Cl)]2 reacts with [Au(NH=CMe2)(PPh3)]ClO4 (1:2) to give [Ir(Cp*)(mu-Cl)(NH=CMe2)]2(ClO4)2 (12) which in turn reacts with PPh 3 or Me4NCl (1:2) to give [Ir(Cp*)Cl(NH=CMe2)(PPh3)]ClO4 (13) or [Ir(Cp*)Cl2(NH=CMe2)] (14), respectively. Complex 14 hydrolyzes in a CH2Cl2/Et2O solution to give [Ir(Cp*)Cl2(NH3)] (15). The reaction of [Ir(Cp*)Cl(mu-Cl)]2 with [Ag(NH=CMe2)2]ClO4 (1:4) gives [Ir(Cp*)(NH=CMe2)3](ClO4)2 (16a), which reacts with PPNCl (PPN = Ph3=P=N=PPh3) under different reaction conditions to give [Ir(Cp*)(NH=CMe2)3]XY (X = Cl, Y = ClO4 (16b); X = Y = Cl (16c)). Equimolar amounts of 14 and 16a react to give [Ir(Cp*)Cl(NH=CMe2)2]ClO4 (17), which in turn reacts with PPNCl to give [Ir(Cp*)Cl(H-imam)]Cl (R-imam = N,N'-N(R)=C(Me)CH2C(Me)2NHR (18a)]. Complexes [Ir(Cp*)Cl(R-imam)]ClO4 (R = H (18b), Me (19)) are obtained from 18a and AgClO4 or by refluxing 2b in acetone for 7 h, respectively. They react with AgClO4 and the appropriate neutral ligand or with [Ag(NH=CMe2)2]ClO4 to give [Ir(Cp*)(R-imam)L](ClO4)2 (R = H, L = (t)BuNC (20), XyNC (21); R = Me, L = MeCN (22)) or [Ir(Cp*)(H-imam)(NH=CMe2)](ClO4)2 (23a), respectively. The later reacts with PPNCl to give [Ir(Cp*)(H-imam)(NH=CMe2)]Cl(ClO4) (23b). The reaction of 22 with XyNC gives [Ir(Cp*)(Me-imam)(CNXy)](ClO4)2 (24). The structures of complexes 15, 16c and 18b have been solved by X-ray diffraction methods.     

Synthesis, structural characterization, and spectroscopy of the cadmium-cadmium bonded molecular species Ar'CdCdAr' (Ar' = C6H3-2,6-(C6H3-2,6-Pri2)2)

The synthesis and first structural characterization of a cadmium-cadmium bonded molecular compound Ar'CdCdAr' (Ar' = C6H3-2,6-(C6H3-2,6-Pri2)2) are reported. The existence of the Cd-Cd bond was established by 113Cd NMR spectroscopy and X-ray diffraction (Cd-Cd = 2.6257(5) A). Like its group 12 analogue Ar'ZnZnAr', DFT calculations showed that Ar'CdCdAr' had significant p-character in the Cd-Cd sigma-bonding HOMO.     

X-ray structure and dynamic behaviour in solution of N-methylthio-N'-2,6-dimethylphenyl).2,6-dimethyl-1,4-quinonediimine formed by the alcoholysis of [Me2 Al{2,6-Me2C6H3NS(Me)NC6H3Me2-2,6}]2

Reaction of [Me₂Al{RNS(Me)NR}]₂ (R = 2,6-Me₂C₆H₃) with t-BuOH affords N-methylthio-N-(2,6-dimethylphenyl)-2,6-dimethyl-1,4-quinonediimine in 67% yield. The X-ray structure of this compound shows that two conformational isomers are present in the solid. Temperature dependent ¹³C and ¹H NMR measurements show that in solution these conformers exchange at a rate which is fast on the NMR time scale at + 60°C and slow at ?₆₀°C. From the coalescence point of two of the ¹³C resonances, the free energy of activation is estimated to be 13.7 + 1.0 $\text{kcal}\text{mol}$ at 10°C. Possible processes for the exchange are discussed, and also a reaction scheme for the formation of the title compound is discussed.     

Crystal and Molecular Structure of [2,6‐(Me2NCH2)2C6H3]2SnF2, an Intramolecularly Coordinated Diorganotin Difluoride

Single‐crystal X‐ray diffraction analysis of [2,6‐(Me₂NCH₂)₂C₆H₃]₂SnF₂ reveals that only one of the two dimethylaminomethyl groups of each pincer‐type ligands [2,6‐(CH₂NMe₂)₂C₆H₃]^? is coordinated to the tin atom at Sn‐N distances of 2.576(2) and 2.470(2) Å, inducing chirality of the latter. The tin atom exhibits a distorted octahedral trans(C,C)cis(N,N)cis(F,F) configuration. Extensive intra‐ and intermolecular C‐H···F hydrogen bonding is observed with the latter giving rise to formation of polymeric chains.     

Fluorine for hydrogen exchange in the hydrofluorobenzene derivatives C6H(x)F(6-x), where x = 2, 3, 4 and 5 by monomeric [1,2,4-(Me3C)3C5H2]2CeH: the solid state isomerization of [1,2,4-(Me3C)3C5H2]2Ce(2,3,4,5-C6HF4) to [1,2,4-(Me3C)3C5H2]2Ce(2,3,4,6-C6HF4)

The reaction between monomeric bis(1,2,4-tri-tert-butylcyclopentadienyl)cerium hydride, Cp'2CeH, and several hydrofluorobenzene derivatives is described. The aryl derivatives that are the primary products, Cp'2Ce(C6H(5-x)F(x)) where x = 1,2,3,4, are thermally stable enough to be isolated in only two cases, since all of them decompose at different rates to Cp'2CeF and a fluorobenzyne; the latter is trapped by either solvent when C6D6 is used or by a Cp'H ring when C6D12 is the solvent. The trapped products are identified by GC/MS analysis after hydrolysis. The aryl derivatives are generated cleanly by reaction of the metallacycle, Cp'((Me3C)2C5H2C(Me2)CH2)Ce, with a hydrofluorobenzene, and the resulting arylcerium products, in each case, are identified by their (1)H and (19)F NMR spectra at 20 degrees C. The stereochemical principle that evolves from these studies is that the thermodynamic isomer is the one in which the CeC bond is flanked by two ortho-CF bonds. This orientation is suggested to arise from the negative charge that is localized on the ipso-carbon atom due to C(o)(delta+)F(o)(delta-) polarization. The preferred regioisomer is determined by thermodynamic rather than kinetic effects; this is illustrated by the quantitative, irreversible solid-state conversion at 25 degrees C over two months of Cp'2Ce(2,3,4,5-C6HF4) to Cp'2Ce(2,3,4,6-C6HF4), an isomerization that involves a CeC(ipso) for C(ortho)F site exchange.     

Synthesis and characterization of the homologous M-M bonded series Ar'MMAr' (M = Zn, Cd, or Hg; Ar' = C6H3-2,6-(C6H3-2,6-Pr(i)2)2) and related arylmetal halides and hydride species

The synthesis and structural characterization of the first homologous, molecular M-M bonded series for the group 12 metals are reported. The compounds Ar'MMAr' (M = Zn, Cd, or Hg; Ar' = C(6)H(3)-2,6-(C(6)H(3)-2,6-Pr(i)(2))(2)) were synthesized by reduction of the corresponding arylmetal halides by alkali metal/graphite (Zn or Hg) or sodium hydride (Cd). These compounds possess almost linear C-M-M-C core structures with two-coordinate metals. The observed M-M bonds distances were 2.3591(9), 2.6257(5), and 2.5738(3) A for the zinc, cadmium, and mercury species, respectively. The shorter Hg-Hg bond in comparison to that of Cd-Cd is consistent with DFT calculations which show that the strength of the Hg-Hg bond is greater. The arylmetal halides precursors (Ar'MI)(1 or 2), and the highly reactive hydrides (Ar'MH)(1 or 2), were also synthesized and fully characterized by X-ray crystallography (Zn and Cd) and multinuclear NMR spectroscopy. The arylzinc and arylcadmium iodides have iodide-bridged dimeric structures, whereas the arylmercury iodide, Ar'HgI, is monomeric. The arylzinc and arylcadmium hydrides have symmetric (Zn) or unsymmetric (Cd) mu-H-bridged structures. The Ar'HgH species was synthesized and characterized by spectroscopy, but a satisfactory refinement of the structure was precluded by the contamination of monomeric Ar'HgH by Ar'H. It was also shown that the decomposition of Ar'Cd(mu-H)(2)CdAr' at room temperature leads to the M-M bonded Ar'CdCdAr', thereby supporting the view that the reduction of the iodide proceeds via the hydride intermediate.     

Syntheses and structures of the arylaluminum chalcogenides (ArAlE)2 (Ar = 2-(NEt2CH2)-6-MeC6H3, E = Se; Ar = 2,6-(NEt2CH2)2C6H3, E = Se, Te)

Two intramolecular stabilized arylaluminum dihydrides, (2-(NEt2CH2)-6-MeC6H3)AlH2 (1) and (2,6-(NEt2CH2)2C6H3)AlH2 (2), were prepared by reducing the corresponding dichlorides with an excess of LiAlH4 in diethyl ether. Reactions of 1 and 2 with elemental selenium afforded the dimeric arylaluminum selenides [(2-(NEt2CH2)-6-MeC6H3)AlSe]2 (3) and [(2,6-(NEt2CH2)2C6H3)AlSe]2 (4). Reaction of 2 with metallic tellurium gave the dimeric arylaluminum telluride [(2,6-(NEt2CH2)2C6H3)AlTe]2 (5). The possible reaction pathway is discussed, and molecular structures determined by single-crystal X-ray analyses are presented for 3 and 5.     

Syntheses and chemistry of hypervalent cyclo-R4Sb4, cyclo-(RSbE)n[R = 2-(Me2NCH2)C6H4, E = O, S] and precursors

The cyclostibane R(4)Sb(4)(1)(R = 2-(Me(2)NCH(2))C(6)H(4)) was synthesized by reduction of RSbCl(2) with Mg in THF or with Na in liquid NH(3). The reaction of 1 with [W(CO)(5)(THF)] gives the stibinidene complex RSb[W(CO)(5)](2)(2). RSbCl(2) and (RSbCl)(2)E [E = O (6), E = S (8)] react with KOH or Na(2)S in toluene/water to give the heterocycles (RSbE)(n)[E = O, n= 3 (3); E = S, n= 2 (4)]. The chalcogeno-bridged compounds of the type (RSbCl)(2)E [E = O (6), E = S (8)] were synthesized by reaction of RSbCl(2) with KOH or Na(2)S in toluene/water, but also by reaction of RSbCl(2) with the heterocycles (RSbE)(n). The compounds (RSbI)(2)O (7) and (RSbBr)(2)S (9) were prepared via halogen-exchange reactions between (RSbCl)(2)E and NaI (E = O) or KBr (E = S) or by reactions between RSbI(2) and KOH or RSbBr(2) and Na(2)S. The reaction of cyclo-(RSbS)(2) with W(CO)(5)(THF) in THF results in trapping of the cis isomer in cyclo-(RSbS)(2)[W(CO)(5)](5). The solution behaviour of the compounds was investigated by (1)H and (13)C NMR spectroscopy. The molecular structures of compounds 1-7 and 9 were determined by single-crystal X-ray diffraction.     

Tetraarylpentaborates, [B(5)O(6)Ar(4)](-) (Ar = C(6)H(4)OMe-4, C(6)H(3)Me(2)-2,6): their formation from the reaction of arylboronic acids with an aryloxorhodium complex,structure, and chemical properties

The reactions of (4-methoxyphenyl)boronic acid (1a) and of (2,6-dimethylphenyl)boronic acid (1b) with (PMe(3))(3)Rh-(OC(6)H(4)Me-4) (2) in a 5:1 molar ratio result in the formation of cationic rhodium complexes with new tetraarylpentaborates [Rh(PMe(3))(4)](+)[B(5)O(6)Ar(4)](-) (3a, Ar = C(6)H(4)OMe-4; 3b, Ar = C(6)H(3)Me(2)-2,6). The characterization of 3a is as follows: orthorhombic space group P2(1)2(1)2(1), a = 14.7600(5) A, b = 17.1675(5) A, c = 19.8654(5) A; V = 5033.7(3) A(3); Z = 4. The characterization of 3b is as follows: orthorhombic space group Pnma, a = 23.704(6) A, b = 17.254(8) A, c = 13.304(2) A; V = 5441(2) A(3); Z = 4. An intermediate complex, [Rh(PMe(3))(4)](+)[Ph(3)B(3)O(3)(OC(6)H(4)Me-4)](-) (4), was isolated from the reaction of phenylboroxine, (PhBO)(3), with 2. The tetraarylpentaborates smoothly undergo hydrolysis to give [Rh(PMe(3))(4)](+)[B(5)O(6)(OH)(4)](-) (5).