Synthesis and X-ray structures of dilithium complexes of the phosphonate anions [PhP(E)(N(t)Bu)(2)](2-) (E = O,S, Se,Te) and dimethylaluminum derivatives of [PhP(E)(N(t)Bu)(NH(t)Bu)](-) (E = S,Se)

The dilithium salts of the phosphonate dianions [PhP(E)(N(t)Bu)(2)](2-) (E = O, S, Se) are generated by the lithiation of [PhP(E)(NH(t)Bu)(2)] with n-butyllithium. The formation of the corresponding telluride (E = Te) is achieved by oxidation of [Li(2)[PhP(N(t)Bu)(2)]] with tellurium. X-ray structural determinations revealed dimeric structures [Li(THF)(2)[PhP(E)(N(t)Bu)(2)]](2) in which the monomeric units are linked by Li-E bonds. In the case of E = Se or Te, but not for E = S, transannular Li-E interactions are also observed, resulting in a six-rung ladder. By contrast, for E = O, this synthetic approach yields the Li(2)O-templated tetramer [(THF)Li(2)[PhP(O)(N(t)Bu)(2)]](4).Li(2)O in THF or the tetramer [(Et(2)O)(0.5)Li(2)[PhP(O)(N(t)Bu)(2)]](4) in diethyl ether. The reaction of trimethylaluminum with PhP(E)(NH(t)Bu)(2) produces the complexes Me(2)Al[PhP(E)(N(t)Bu)(NH(t)Bu)] (E = S, Se), which were shown by X-ray crystallography to be N,E-chelated monomers.     

Synthesis and structural characterization of a new series of vanadoselenites, [Se(x)V(4-x)O(12-x)](4-x)- (x=1,2)

Two new vanadoselenites, [SeV(3)O(11)](3)(-) and [Se(2)V(2)O(10)](2)(-), were synthesized by reacting SeO(2) with VO(3)(-). Single-crystal X-ray structural analyses of [(n-C(4)H(9))(4)N](3)[SeV(3)O(11)].0.5H(2)O [orthorhombic, space group P2(1)2(1)2, a = 22.328(5) A, b = 44.099(9) A, c = 12.287(3) A, Z = 8] and [[(C(6)H(5))(3)P](2)N](2)[Se(2)V(2)O(10)] [monoclinic, space group P2(1)/n, a = 12.2931(3) A, b = 13.5101(3) A, c = 20.9793(5) A, beta = 106.307(1) degrees, Z = 2] revealed that both anions are composed of Se(x)()V(4)(-)(x)()O(4) rings. The (51)V, (77)Se, and (17)O NMR spectra established that both [SeV(3)O(11)](3)(-) and [Se(2)V(2)O(10)](2)(-) anions maintain this ring structure in solution.     

Site-differentiated hexanuclear rhenium(III) cyanide clusters [Re(6)Se(8)(PEt(3))(n)()(CN)(6)(-)(n)()](n)()(-)(4) (n = 4, 5) and kinetics of solvate ligand exchange on the cubic [Re(6)Se(8)](2+) Core

The site-differentiated, cyanide-substituted hexanuclear rhenium(III) selenide clusters cis- and trans-[Re(6)Se(8)(PEt(3))(4)(CN)(2)] and [Re(6)Se(8)(PEt(3))(5)(CN)](+) have been prepared from heterogeneous reactions of the corresponding iodo clusters with AgCN in refluxing chloroform. Isolated yields are 68%, 46%, and 64% for cis-[Re(6)Se(8)(PEt(3))(4)(CN)(2)], trans-[Re(6)Se(8)(PEt(3))(4)(CN)(2)], and [Re(6)Se(8)(PEt(3))(5)(CN)](+), respectively. The new compounds are air- and water-stable and are characterized by X-ray diffraction crystallography, (31)P NMR and IR spectroscopies, and FAB mass spectrometry. In related work, the solvent exchange rates of two site-differentiated monosolvate clusters, [Re(6)Se(8)(PEt(3))(5)(MeCN)](SbF(6))(2) and [Re(6)Se(8)(PEt(3))(5)(Me(2)SO)](SbF(6))(2), in neat solvents were measured by (1)H NMR. These clusters are substitutionally inert; k approximately 10(-)(5)-10(-)(6) s(-)(1) at 318 K. Activation parameters indicate a dissociative ligand exchange mechanism; DeltaH() values obtained from least-squares fitting of temperature-dependent kinetics data exceed RT by a factor of ca. 50 over the temperature range studied. These results demonstrate that the substitutional lability encountered in a previous study of cluster photophysics (Gray, T. G.; Rudzinski, C. M.; Nocera, D. G.; Holm, R. H. Inorg. Chem. 1999, 38, 5932) cannot result from ground-state thermal reactions.     

Syntheses and characterization of some mixed Te/Se polychalcogenide anions [Te(m)Se(n)]2-

Several mixed Te/Se polychalcogenide anions [Te(m)Se(n)](2-) were synthesized at 293 K by reactions between Te(n)(2-)and Se(n)(2-) anions in N,N-dimethylformamide (DMF) in the presence of different-size ammonium or phosphonium cations, in some cases in the presence of metal species. The structures of these anions were determined by single-crystal X-ray diffraction methods. The crystal structures of [NEt(4)](2)[Te(3)Se(6)] (1) and [NEt(4)](2)[Te(3)Se(7)] (2) consist, respectively, of one-dimensional infinite 1(infinity)[Te(3)Se(6)(2-)] and 1(infinity)[Te(3)Se(7)(2-)] anionic chains separated by NEt(4)(+) cations. In compound 1, each chain comprises Te(3)Se(5) eight-membered rings bridged by Se atoms. The Te(3)Se(5) ring has an "open book" conformation. The NMR spectrum of a DMF solution of [NEt(4)](2)[Te(3)Se(6)] crystals at 223 K shows (77)Se resonances at delta = 290, 349, and 771 ppm and a single (125)Te resonance at delta = 944.7 ppm. In compound 2, each chain comprises Te(3)Se(6) five- and six-membered rings bridged by Se atoms. The Te(3)Se(6) ring can be regarded as an inorganic analogue of bicyclononane. The anion of [PPh(4)](2)[Te(2)Se(2)] (4) contains a Se-Te-Te-Se chain with the terminal Se atoms trans to one another. The new compounds [PPN](2)[TeSe(10)] (3), [NMe(4)](2)[TeSe(3)].DMF (5), and [NEt(4)](2)[TeSe(3)] (6) contain known anions.     

Hydrothermal syntheses and crystal structures of complex-linked three-Dimensional coordination vanadium selenites: M(4,4'-bipy)(H(2)O)V(2)Se(2)O(10) (M = Co,Ni)

Two inorganic-organic hybrid compounds with the formula M(4,4'-bipy)(H(2)O)V(2)Se(2)O(10) (M = Co, Ni) were hydrothermally synthesized and characterized by single-crystal X-ray diffraction. Compounds Co(4,4'-bipy)(H(2)O)V(2)Se(2)O(10) (1) and Ni(4,4'-bipy)(H(2)O)V(2)Se(2)O(10) (2), which are structural analogues, crystallize in the triclinic space group Ponemacr; with crystal data a = 7.9665(3) A, b = 8.1974(3) A, c = 13.8096(4) A, alpha = 85.704(2) degrees, beta = 73.5180(10) degrees, gamma = 75.645(2) degrees, V = 837.76(5) A(3), and Z = 2 and a = 7.9489(19) A, b = 8.128(2) A, c = 13.709 A, alpha = 85.838(6) degrees, beta = 73.736(8) degrees, gamma = 75.594(9) degrees, V = 823.5(4) A(3), and Z = 2, respectively. [M(4,4'-bipy)(H(2)O)V(2)Se(2)O(10)] (M = Co, Ni) have a three-dimensional structure and consist of two subunits, [(VO(2))(SeO(3))](-) infinite chains and [M(4,4'-bipy)(H(2)O)](2+) fragments. The [(VO(2))(SeO(3))](-) chains are composed of [V(2)Se(4)O(14)](4)(-) clusters linked by VO(4)N triangular bipyramids. The 4,4'-bipy molecule as a bifunctional organic ligand is directly linked to Co or Ni and V atoms, affording the three-dimensionality. The compounds were characterized by infrared spectroscopy and differential thermal and thermogravimetric analyses.     

Preparation and Structures of the 2.2.2-Cryptand(1+) Salts of the [Sb(2)Se(4)](2)(-), [As(2)S(4)](2)(-), [As(10)S(3)](2)(-), and [As(4)Se(6)](2)(-) Anions

2.2.2-Cryptand(1+) salts of the [Sb(2)Se(4)](2)(-), [As(2)S(4)](2)(-), [As(10)S(3)](2)(-), and [As(4)Se(6)](2)(-) anions have been synthesized from the reduction of binary chalcogenide compounds by K in NH(3)(l) in the presence of the alkali-metal-encapsulating ligand 2.2.2-cryptand (4,7,13,16,21,24-hexaoxa-1,10-diazabicyclo[8.8.8]hexacosane), followed by recrystallization from CH(3)CN. The [Sb(2)Se(4)](2)(-) anion, which has crystallographically imposed symmetry 2, consists of two discrete edge-sharing SbSe(3) pyramids with terminal Se atoms cis to each other. The Sb-Se(t) bond distance is 2.443(1) ?, whereas the Sb-Se(b) distance is 2.615(1) ? (t = terminal; b = bridge). The Se(b)-Sb-Se(t) angles range from 104.78(4) to 105.18(5) degrees, whereas the Se(b)-Sb-Se(b) angles are 88.09(4) and 88.99(4) degrees. The (77)Se NMR data for this anion in solution are consistent with its X-ray structure (delta 337 and 124 ppm, 1:1 intensity, -30 degrees C, CH(3)CN/CD(3)CN). Similar to this [Sb(2)Se(4)](2)(-) anion, the [As(2)S(4)](2)(-) anion consists of two discrete edge-sharing AsS(3) pyramidal units. The As-S(t) bond distances are 2.136(7) and 2.120(7) ?, whereas the As-S(b) distances range from 2.306(7) to 2.325(7) ?. The S(b)-As-S(t) angles range from 106.2(3) to 108.2(3) degrees, and the S(b)-As-S(b) angles are 88.3(2) and 88.9(2) degrees. The [As(10)S(3)](2)(-) anion has an 11-atom As(10)S center composed of six five-membered edge-sharing rings. One of the three waist positions is occupied by a S atom, and the other two waist positions feature As atoms with exocyclic S atoms attached, making each As atom in the structure three-coordinate. The As-As bond distances range from 2.388(3) to 2.474(3) ?. The As-S(t) bond distances are 2.181(5) and 2.175(4) ?, and the As-S(b) bond distance is 2.284(6) ?. The [As(4)Se(6)](2)(-) anion features two AsSe(3) units joined by Se-Se bonds with the two exocyclic Se atoms trans to each other. The average As-Se(t) bond distance is 2.273(2) ?, whereas the As-Se(b) bond distances range from 2.357(3) to 2.462(2) ?. The Se(b)-As-Se(t) angles range from 101.52(8) to 105.95(9) degrees, and the Se(b)-As-Se(b) angles range from 91.82(7) to 102.97(9) degrees. The (77)Se NMR data for this anion in solution are consistent with its X-ray structure (delta 564 and 317 ppm, 3:1 intensity, 25 degrees C, DMF/CD(3)CN).     

Experimental investigations and ab initio studies of selenium(II) dialkanethiolates, Se(SR)2

Selenium(II) dimethanethiolate, Se(SMe)(2), was synthesized by reaction of SeO(2) with HSMe. Basic spectroscopic data for Se(SMe)(2) and selenium(II) bis(2-methyl-2-propanethiolate), Se(S(t)Bu)(2), were recorded and interpreted with the support of ab initio calculations. Both compounds are thermodynamically unstable relatively to selenium and the corresponding disulfide. The UV/vis spectra of both compounds are qualitatively similar, the two bands being attributed to n(Se)-sigma*(Se-S) transitions. The bands at 369 and 397 cm(-1) in the IR spectra of Se(SMe)(2) and Se(S(t)Bu)(2), respectively, are assigned to nu(as)(SeS(2)). The (77)Se NMR shifts of Se(SMe)(2)(784 ppm) and Se(S(t)Bu)(2)(556 ppm) differ substantially from each other and show positive temperature gradients. Calculations at the GIAO-HF/962+(d) level reproduced the difference of the (77)Se NMR chemical shifts between Se(SMe)(2) and Se(S(t)Bu)(2). At the same level, the effect of conformational changes on (77)Se shifts were studied for Se(SMe)(2). In the solid state Se(SMe)(2) forms long intermolecular SeS contacts while Se(S(t)Bu)(2) does not. Both compounds exhibit anti-conformations of the methyl and tert-butyl groups with respect to the SeS(2) plane. MP2/LANL2DZ(d) geometry optimizations, single point energy and frequency calculations performed for Se(SMe)(2) show, that syn- (C(s)) and anti-conformers (C(2)) represent minima on the potential energy surface, the latter being by 8 kJ mol(-1) lower in energy than the former. Both conformers are stabilized by intramolecular pi-type n(S(1))-sigma*(Se-S(2)) orbital interactions. The energy of the transition state for the mutual conversion of the two conformers was calculated to be 31 kJ mol(-1) above that of the syn conformer, allowing a rapid interconversion of the two conformers at room temperature. Intermolecular interactions between Se(SMe)(2) molecules were also studied by means of calculations at the MP2/LANL2DZ(d) level. For Se(S(t)Bu)(2) MP2/LANL2DZ(d) geometry optimizations and single point energy calculations revealed a C(2)-symmetric anti- and a C(1) symmetric syn-conformer, the latter being 21 kJ mol(-1) higher in energy than the former. Se(SMe)(2) and Se(S(t)Bu)(2) exchange thiolate groups with other selenium(II) dithiolates, tellurium(II) dithiolates and with thiols, if catalytic amounts of p-CH(3)C(6)H(4)SO(3)H are added.     

Preparation and x-ray structures of alkali-metal derivatives of the ambidentate anions [tBuN(E)P(mu-NtBu)2P(E)NtBu]2- (E = S, Se) and [tBuN(Se)P(mu-NtBu)2PN(H)tBu)]-

The ambidentate dianions [(t)BuN(E)P(mu-N(t)Bu)(2)P(E)N(t)Bu](2)(-) (5a, E = S; 5b, E = Se) are obtained as their disodium and dipotassium salts by the reaction of cis-[(t)Bu(H)N(E)P(mu-N(t)Bu)(2)P(E)N(H)(t)Bu] (6a, E = S; 6b, E = Se), with 2 equiv of MN(SiMe(3))(2) (M = Na, K) in THF at 23 degrees C. The corresponding dilithium derivative is prepared by reacting 6a with 2 equiv of (t)BuLi in THF at reflux. The X-ray structures of five complexes of the type [(THF)(x)()M](2)[(t)BuN(E)P(mu-N(t)Bu)(2)P(E)N(t)Bu] (9, M = Li, E = S, x = 2; 11a/11b, M = Na, E = S/Se, x = 2; 12a, M = K, E = S, x = 1; 12b, M = K, E = Se, x = 1.5) have been determined. In the dilithiated derivative 9 the dianion 5a adopts a bis (N,S)-chelated bonding mode involving four-membered LiNPS rings whereas 11a,b and 12a,b display a preference for the formation of six-membered MNPNPN and MEPNPE rings, i.e., (N,N' and E,E')-chelation. The bis-solvated disodium complexes 11a,b and the dilithium complex 9 are monomeric, but the dipotassium complexes 12a,b form dimers with a central K(2)E(2) ring and associate further through weak K.E contacts to give an infinite polymeric network of 20-membered K(6)E(6)P(4)N(4) rings. The monoanions [(t)Bu(H)N(E)P(mu-N(t)Bu)(2)P(E)N(t)Bu)](-) (E = S, Se) were obtained as their lithium derivatives 8a and 8b by the reaction of 1 equiv of (n)BuLi with 6a and 6b, respectively. An X-ray structure of the TMEDA-solvated complex 8a and the (31)P NMR spectrum of 8b indicate a N,E coordination mode. The reaction of 6b with excess (t)BuLi in THF at reflux results in partial deselenation to give the monolithiated P(III)/P(V) complex [(THF)(2)Li[(t)BuN(Se)P(mu-N(t)Bu)(2)PN(H)(t)Bu]] 10, which adopts a (N,Se) bonding mode.     

Copper-selenium interactions: influence of alkane spacer and halide anion in the synthesis of unusual polynuclear copper(I) complexes with bis(diphenylselenophosphinyl)alkanes

The reactions of copper(I) halides with bis(diphenylselenophosphinyl)alkanes, namely Ph(2)P(Se)-(CH(2))(n)-P(Se)Ph(2) [n = 1-4], in acetonitrile are described. The ligand 1,3-bis(diphenylselenophosphinyl)propane [dppp-Se,Se] with copper(I) bromide and copper(I) iodide formed two unusual infinite coordination polymers, namely [Cu(2)Br(2)(mu(2)-dppp-Se-Se)(2)](n), 1, and [Cu(3)I(3)(mu(2)-dppp-Se,Se)(2)](n), 2. Selenium bridged dinuclear complexes, [Cu(2)Br(2)((mu(3)-dppm-Se,Se)(2)], 3, and [Cu(2)I(2)(dppm-Se,Se)(2)], 4, were formed using 1,1-bis(diphenylselenophosphinyl)methane [dppm-Se,Se]. Similarly, 1,2-bis(diphenylselenophosphinyl)ethane [dppe-Se,Se] and 1,4-bis(diphenylselenophosphinyl)butane [dppb-Se,Se] formed complexes, Cu(2)Br(2)(dppe-Se,Se)(2), 5, and Cu(2)I(2)(dppb-Se,Se), 6. These have been characterized with the help of analytical data, infrared spectroscopy, and, for compounds 1-3, X-ray crystallography. Compound 2, [Cu(3)I(3(dppp-Se,Se)(2)](n), has two dppp-Se,Se molecules coordinating to two copper(I) atoms of the dinuclear Cu(mu-I)(2)Cu core in unidentate fashion, with two pendant Ph(2)P(Se)- moieties in trans orientation, and one of these groups is coordinated to another copper(I) iodide moiety, thus forming the repeat unit (A), -CuI(mu-dppp-Se,Se)Cu(mu-I)(2)Cu(mu-dppp-Se,Se)-. This repeat unit (A) combined with another unit, and this process continued and finally formed the infinite polymer 2. In this polymer, the mononuclear CuISe(2) and dinuclear Cu(2)(mu-I)(2)Se(2) cores have distorted trigonal planar geometries around Cu centers. The Cu(2)...Cu(2)* separation of 2.643(1) A is less than twice the van der Waals radius of Cu, 2.80 A. The structure of polymer 1 is similar to that of 2, except that it has only mononuclear trigonal planar CuBrSe(2) units bridged by Se atoms of dppp-Se,Se ligand, and the repeat unit is -CuBr(mu(2)-dppp-Se,Se)CuBr(mu(2)(-)dppp-Se,Se)-. The formation of zigzag one-dimensional copper(I) coordination polymers (1 and 2), with trigonal planar copper(I) centers, provides the first examples of this type in tertiary phosphine chalcogenide chemistry. In contrast, the decrease in methylene chain length, from -(CH(2))(3)- to -(CH(2))-, resulted in chelation by the dppm-Se,Se ligand, forming CuBr(dppm-Se,Se), which dimerized via Se donor atoms and formed [Cu(2)Br(2)(mu(3)-dppm-Se,Se)(2)], 3. It has a relatively less common central kernel, Cu(mu-Se)(2)Cu, and each Cu atom is further bonded to one terminal Br and one Se atoms, and the geometry around each Cu center is distorted tetrahedral (bond angles, ca. 101-121 degrees).     

A Comparative Study of Two New Structure Types. Synthesis and Structural and Electronic Characterization of K(RE)P(2)Se(6) (RE = Y, La, Ce, Pr, Gd)

Two polytypes of potassium rare-earth-metal hexaselenodiphosphates(IV), K(RE)P(2)Se(6) (RE = Y, La, Ce, Pr, Gd), have been synthesized from the stoichiometric reaction of RE, P, Se, and K(2)Se(4) at 750 degrees C. Both single-crystal and powder X-ray diffraction analyses showed that the structures of these polytypes vary with the size of the rare earth metals. For the smaller rare-earth metals, Y and Gd, K(RE)P(2)Se(6) crystallized in the orthorhombic space group P2(1)2(1)2(1). The yttrium compound was studied by single-crystal X-ray diffraction with the cell parameters a = 6.7366(5) ?, b = 7.4286(6) ?, c = 21.603(2) ?, and Z = 4. This structure type comprises a layered, square network of yttrium atoms that are bound to four distinct [P(2)Se(6)](4)(-) units through selenium bonding. Each [P(2)Se(6)](4)(-) unit possesses a Se atom that is not bound to any Y atom but is pointing out into the interlayer spacing, into an environment of potassium cations. For larger rare-earth metals, La, Ce, and Pr, K(RE)P(2)Se(6) crystallized in a second, monoclinic polytype, the structure of which has been published. Both of these two different polytypes can be related to each other and several other isoelectronic chalcophosphate structures based on a Parthé valence electron concentration analysis. These structures include Ag(4)P(2)S(6), K(2)FeP(2)S(6), and the hexagonal M(II)PS(3) structure types. The magnetic susceptibilities of the title compounds have been studied, and the behavior can been explained based on a simple set of unpaired f-electrons. The diffuse reflectance spectroscopy also showed that these yellow plates are moderately wide band gap ( approximately 2.75 eV) semiconductors.     

Lanthanide clusters with internal Ln: fragmentation and the formation of dimers with bridging Se(2-) and Se2(2-) ligands

Reactions of "LnI(x)(SePh)(3-x)" (Ln = Dy, Ho) with elemental S/Se give (THF)14Ln10S6(Se2)6I6. The compounds are composed of a Ln6S6 double cubane core, with two twisted "Ln2(SeSe)3" units condensed onto opposing rectangular sides of the Ln6S6 fragment. This deposition of Ln2Se6 totally encapsulates the two central Ln's with chalcogen atoms (four S and four Se atoms), excluding neutral THF donors or iodides from the two primary coordination spheres. Reactions of Ln(10) clusters with a stronger Lewis base result in fragmentation and, in the case of Ln = Er, the isolation of (py)6Er2(Se2)(S0.8Se0.2)I2, with two Ln(III) ions spanned by E2- and (EE)2- ligands. The related homochalcogen dimers (py)6Ln2(Se2)(Se)Br2 (Ln = Ho, Yb) were prepared to establish that such molecules could be prepared rationally, and to confirm the isolability of E2- ligands coordinated to only two sterically unconstrained Ln ions.     

Experimental and theoretical investigations of structural trends for selenium(IV) imides and oxides: X-ray structure of Se3(NAd)2

The thermal decomposition of Se(NAd)(2) (Ad = 1-adamantyl) in THF was monitored by (77)Se NMR and shown to give the novel cyclic selenium imide Se(3)(NAd)(2) as one of the products. An X-ray structural determination showed that Se(3)(NAd)(2) is a puckered five-membered ring with d(Se-Se) = 2.404(1) A and |d(Se-N)| = 1.873(4) A. On the basis of (77)Se NMR data, other decomposition products include the six-membered ring Se(3)(NAd)(3), and the four-membered rings AdNSe(micro-NAd)(2)SeO and OSe(micro-NAd)(2)SeO. The energies for the cyclodimerization of E(NR)(2) and RNEO (E = S, Se; R = H, Me, (t)Bu, SiMe(3)), and the cycloaddition reactions of RNSeO with E(NR)(2), RNSO(2) with Se(NR)(2), and S(NR)(2) with Se(NR)(2) have been calculated at MP2, CCSD, and CCSD(T) levels of theory using the cc-pVDZ basis sets and B3PW91/6-31G* optimized geometries. Sulfur(IV) and selenium(IV) diimide monomers are predicted to be stable, the sole exception being Se(NSiMe(3))(2) that shows a tendency toward cyclodimerization. The cyclodimerization energy for RNSeO and the cycloaddition reaction energies of RNSeO with Se(NR)(2) as well as that of RNSO(2) with Se(NR)(2) are negative, consistent with the observed formation of OSe(micro-N(t)Bu)(2)SeO, OSe(micro-N(t)Bu)(2)SeN(t)Bu, and O(2)S(micro-N(t)Bu)(2)SeN(t)Bu, respectively. Cycloaddition is unlikely when one of the reactants is a sulfur(IV) diimide.     

U(IV) chalcogenolates synthesized via oxidation of uranium metal by dichalcogenides

Treatment of uranium metal with dichalcogenides in the presence of a catalytic amount of iodine in pyridine affords molecular U(IV) chalcogenolates that do not require stabilizing ancillary ligands. Oxidation of U(0) by PhEEPh yields monomeric seven-coordinate U(EPh)4(py)3 (E = S(1), Se(2)). The dimeric eight-coordinate complexes [U(EPh)2(mu2-EPh)2(CH3CN)2]2 (E = S(3), Se(4)) are obtained by crystallization from solutions of 1 and 2 dissolved in acetonitrile. Oxidation of U(0) by pySSpy and crystallization from thf yields nine-coordinate U(Spy)4(thf) (5). Incorporation of elemental selenium into the oxidation of U(0) by PhSeSePh results in the isolation of [U(py)2(SePh)(mu3-Se)(mu2-SePh)]4.4py (6), a tetrameric cluster in which each U(IV) ion is eight-coordinate and the U4Se4 core forms a distorted cube. The compounds were analyzed spectroscopically and the single-crystal X-ray structures of 1 and 3-6 were determined. The isolation of 1-6 represents six new examples of actinide chalcogenolates and allows insight into the nature of "hard" actinide ion-"soft" chalcogen donor interactions.     

Synthesis and reactivity of W3Te74+ clusters and chalcogen exchange in the M3Q7 (M = Mo, W; Q = S, Se, Te) cluster family

Heating WTe(2), Te, and Br(2) at 390 degrees C followed by extraction with KCN gives [W(3)Te(7)(CN)(6)](2-). Crystal structures of double salts Cs(3.5)K{[W(3)Te(7)(CN)(6)]Br}Br(1.5).4.5H(2)O (1), Cs(2)K(4){[W(3)Te(7)(CN)(6)](2)Cl}Cl.5H(2)O (2), and (Ph(4)P)(3){[W(3)Te(7)(CN)(6)]Br}.H(2)O (3) reveal short Te(2)...X (X = Cl, Br) contacts. Reaction of polymeric Mo(3)Se(7)Br(4) with KNCSe melt gives [Mo(3)Se(7)(CN)(6)](2-). Reactions of polymeric Mo(3)S(7)Br(4) and Mo(3)Te(7)I(4) with KNCSe melt (200-220 degrees C) all give as final product [Mo(3)Se(7)(CN)(6)](2)(-) via intermediate formation of [Mo(3)S(4)Se(3)(CN)(6)](2-)/[Mo(3)SSe(6)(CN)(6)](2-) and of [Mo(3)Te(4)Se(3)(CN)(6)](2-), respectively, as was shown by ESI-MS. (NH(4))(1.5)K(3){[Mo(3)Se(7)(CN)(6)]I}I(1.5).4.5H(2)O (4) was isolated and structurally characterized. Reactions of W(3)Q(7)Br(4) (Q = S, Se) with KNCSe lead to [W(3)Q(4)(CN)(9)](5-). Heating W(3)Te(7)Br(4) in KCNSe melt gives a complicated mixture of W(3)Q(7) and W(3)Q(4) derivatives, as was shown by ESI-MS, from which E(3)[W(3)(mu(3)-Te)(mu-TeSe)(3)(CN)(6)]Br.6H(2)O (5) and K(5)[W(3)(mu(3)-Te)(mu-Se)(3)(CN)(9)] (6) were isolated. X-ray analysis of 5 reveals the presence of a new TeSe(2-) ligand. The complexes were characterized by IR, Raman, electronic, and (77)Se and (125)Te NMR spectra and by ESI mass spectrometry.     

New vanadium selenites: centrosymmetric Ca2(VO2)2(SeO3)3(H2O)2, Sr2(VO2)2(SeO3)3, and Ba(V2O5)(SeO3), and noncentrosymmetric and polar A4(VO2)2(SeO3)4(Se2O5) (A = Sr2+ or Pb2+)

Five new vanadium selenites, Ca(2)(VO(2))(2)(SeO(3))(3)(H(2)O)(2), Sr(2)(VO(2))(2)(SeO(3))(3), Ba(V(2)O(5))(SeO(3)), Sr(4)(VO(2))(2)(SeO(3))(4)(Se(2)O(5)), and Pb(4)(VO(2))(2)(SeO(3))(4)(Se(2)O(5)), have been synthesized and characterized. Their crystal structures were determined by single crystal X-ray diffraction. The compounds exhibit one- or two-dimensional structures consisting of corner- and edge-shared VO(4), VO(5), VO(6), and SeO(3) polyhedra. Of the reported materials, A(4)(VO(2))(2)(SeO(3))(4)(Se(2)O(5)) (A = Sr(2+) or Pb(2+)) are noncentrosymmetric (NCS) and polar. Powder second-harmonic generation (SHG) measurements revealed SHG efficiencies of approximately 130 and 150 × α-SiO(2) for Sr(4)(VO(2))(2)(SeO(3))(4)(Se(2)O(5)) and Pb(4)(VO(2))(2)(SeO(3))(4)(Se(2)O(5)), respectively. Piezoelectric charge constants of 43 and 53 pm/V, and pyroelectric coefficients of -27 and -42 μC/m(2)·K at 70 °C were obtained for Sr(4)(VO(2))(2)(SeO(3))(4)(Se(2)O(5)) and Pb(4)(VO(2))(2)(SeO(3))(4)(Se(2)O(5)), respectively. Frequency dependent polarization measurements confirmed that the materials are not ferroelectric, that is, the observed polarization cannot be reversed. In addition, the lone-pair on the Se(4+) cation may be considered as stereo-active consistent with calculations. For all of the reported materials, infrared, UV-vis, thermogravimetric, and differential thermal analysis measurements were performed. Crystal data: Ca(2)(VO(2))(2)(SeO(3))(3)(H(2)O)(2), orthorhombic, space group Pnma (No. 62), a = 7.827(4) ?, b = 16.764(5) ?, c = 9.679(5) ?, V = 1270.1(9) ?(3), and Z = 4; Sr(2)(VO(2))(2)(SeO(3))(3), monoclinic, space group P2(1)/c (No. 12), a = 14.739(13) ?, b = 9.788(8) ?, c = 8.440(7) ?, β = 96.881(11)°, V = 1208.8(18) ?(3), and Z = 4; Ba(V(2)O(5))(SeO(3)), orthorhombic, space group Pnma (No. 62), a = 13.9287(7) ?, b = 5.3787(3) ?, c = 8.9853(5) ?, V = 673.16(6) ?(3), and Z = 4; Sr(4)(VO(2))(2)(SeO(3))(4)(Se(2)O(5)), orthorhombic, space group Fdd2 (No. 43), a = 25.161(3) ?, b = 12.1579(15) ?, c = 12.8592(16) ?, V = 3933.7(8) ?(3), and Z = 8; Pb(4)(VO(2))(2)(SeO(3))(4)(Se(2)O(5)), orthorhombic, space group Fdd2 (No. 43), a = 25.029(2) ?, b = 12.2147(10) ?, c = 13.0154(10) ?, V = 3979.1(6) ?(3), and Z = 8.     

Nitrate-Bridged "Pseudo-Double-Propeller"-Type Lanthanide(III)-Copper(II) Heterometallic Clusters: Syntheses, Structures, and Magnetic Properties

Two discrete nitrate-bridged novel "pseudo-double-propeller"-shaped hexanuclear Cu/Ln clusters of the formula [Cu(4)Ln(2)L(4)L'(4)(NO(3))(2)(OH(2))(2)]·3NO(3)·4H(2)O [Ln = Dy, Gd; LH = o-vanilin; L'H = 2-(hydroxyethyl)pyridine] were synthesized and characterized. Single-crystal X-ray diffraction studies revealed the trimeric half-propeller-type Cu(2)/Ln core connected to other opposite-handed similar trimers by a bridging nitrate ligand. The Dy analogue, [Cu(4)Dy(2)L(4)L'(4)(NO(3))(2)(OH(2))(2)]·3NO(3)·4H(2)O, shows frequency-dependent out-of-phase alternating-current magnetic susceptibility, which indicates that this novel discrete [Cu(4)Dy(2)] heterometallic cluster may exhibit single-molecule-magnet behavior.     

Aminotroponiminatogermaacid halides with a ge(e)x moiety (e = s, se; x = f, cl)

Fluorination of aminotroponiminate (ATI) ligand-stabilized germylene monochloride [(t-Bu)(2)ATI]GeCl (1) with CsF gave the aminotroponiminatogermylene monofluoride [(t-Bu)(2)ATI]GeF (2). Oxidative addition reaction of compound 2 with elemental sulfur and selenium led to isolation of the corresponding germathioacid fluoride [(t-Bu)(2)ATI]Ge(S)F (3) and germaselenoacid fluoride [(t-Bu)(2)ATI]Ge(Se)F (4), respectively. Similarly, reaction of aminotroponiminatogermylene monochloride [(i-Bu)(2)ATI]GeCl (9) with elemental sulfur and selenium gave the aminotroponiminatogermathioacid chloride [(i-Bu)(2)ATI]Ge(S)Cl (11) and aminotroponiminatogermaselenoacid chloride [(i-Bu)(2)ATI]Ge(Se)Cl (12), respectively. Compound 9 has been prepared through a multistep synthetic route starting from 2-(tosyloxy)tropone 5. All compounds (2-4 and 6-12) were characterized through the multinuclear NMR spectroscopy, and single-crystal X-ray diffraction studies were performed on compounds 2, 4, and 8-12. The germaselenoacid halide complexes 4 and 12 showed doublet (-142.37 ppm) and singlet (-213.13 ppm) resonances in their (77)Se NMR spectra, respectively. Germylene monohalide complexes 2 and 9 have a germanium center in distorted trigonal pyramidal geometry, whereas a distorted tetrahedral geometry is seen around the germanium center in germaacid halide complexes 4, 11, and 12. The length of the Ge═E bond in germathioacid chloride (11) and germaselenoacid halide (4 and 12) complexes is 2.065(1) and 2.194(av) ?, respectively. Theoretical studies (based on the DFT methods) on complexes 4, 11, and 12 reveal the nature of the Ge═E multiple bond in these germaacid halide complexes with computed Wiberg bond indices (WBI) being 1.480, 1.508, and 1.541, respectively.     

Syntheses, vibrational spectra, and theoretical studies of the adamantanoid Sn(4)Ch(10)(4-) (Ch = Se, Te) anions: X-ray crystal structures of [18-crown-6-K](4)[Sn4Se10]*5en and [18-crown-6-K](4)[Sn4Te10]*3en*2THF

The salts [18-crown-6-K](4)[Sn(4)Se(10)].5en and [18-crown-6-K](4)[Sn(4)Te(10)].3en.2THF were isolated upon addition of THF to the ethylenediamine (en) extracts of the alloys KSn(0.90)Se(1.93) and K(4)Sn(4)Te(10) that had been extracted in the presence of 18-crown-6 (1,4,7,10,13,16-hexaoxacyclooctadecane). The Sn(4)Te(10)(4-) anion has been structurally characterized for the first time by a single-crystal X-ray diffraction study of [18-crown-6-K](4)[Sn(4)Te(10)].3en.2THF: P2(1)/n, a = 22.420(5) A, b = 19.570(4) A, c = 24.680(5) A, beta = 96.90(3)(o), Z = 4, and R(1) = 0.0468 at -183 degrees C. In addition to Si(4)Te(10)(4-) and Ge(4)Te(10)(4-), the Sn(4)Te(10)(4-) anion represents the only other known group 14 adamantanoid telluride. The X-ray crystal structure determination of the related [18-crown-6-K](4)[Sn(4)Se(10)].5en salt has also been determined: P2(1)/n, a = 22.003(2) A, b = 18.966(2) A, c = 24.393(2) A, beta = 97.548(8)(o), Z = 4, and R(1) = 0.0843 at -123 degrees C. The anion geometries are of the adamantanoid type where the Sn(IV) atoms occupy the bridgehead positions and the chalcogen atoms occupy the bridging and terminal sites. The energy minimized geometries of Sn(4)Ch(10)(4-) have also been determined using density functional theory (DFT). Mayer bond order analyses, Mayer valencies, and empirical bond valencies indicate that the terminal Sn-Ch bonds have significant multiple bond character, with the terminal Sn-Se bond having more multiple bond character than the terminal Sn-Te bond. The vibrational frequencies of the Sn(4)Se(10)(4-) and Sn(4)Te(10)(4-) anions have been calculated using DFT methods, allowing the Raman spectrum of Sn(4)Se(10)(4-) to be fully assigned.     

Zinc chalcogenolate complexes as precursors to ZnE and Mn/ZnE (E = S, Se) clusters

The ternary clusters (tmeda)(6)Zn(14-x)Mn(x)S(13)Cl(2) (1a-d) and (tmeda)(6)Zn(14-x)Mn(x)Se(13)Cl(2) (2a-d), (tmeda = N,N,N',N'-tetramethylethylenediamine; x ≈ 2-8) and the binary clusters (tmeda)(6)Zn(14)E(13)Cl(2) (E = S, 3; Se, 4;) have been isolated by reacting (tmeda)Zn(ESiMe(3))(2) with Mn(II) and Zn(II) salts. Single crystal X-ray analysis of the complexes confirms the presence of the six "(tmeda)ZnE(2)" units as capping ligands that stabilize the clusters, and distorted tetrahedral geometry around the metal centers. Mn(II) is incorporated into the ZnE framework by substitution of Zn(II) ions in the cluster. The polynuclear complexes (tmeda)(6)Zn(12.3)Mn(1.7)S(13)Cl(2)1a, (tmeda)(6)Zn(12.0)Mn(2.0)Se(13)Cl(2)2a, and (tmeda)(6)Zn(8.4)Mn(5.6)Se(13)Cl(2)2d represent the first examples of "Mn/ZnE" clusters with structural characterization and indications of the local chemical environment of the Mn(II) ions. The incorporation of higher amounts of Mn into 1d and 2d has been confirmed by elemental analysis. Density functional theory (DFT) calculations indicate that replacement of Zn with Mn is perfectly feasible and at least partly allows for the identification of some sites preferred by the Mn(II) metals. These calculations, combined with luminescence studies, suggest a distribution of the Mn(II) in the clusters. The room temperature emission spectra of clusters 1c-d display a significant red shift relative to the all zinc cluster 3, with a peak maximum centered at 730 nm. Clusters 2c-d display a peak maximum at 640 nm in their emission spectra.     

Expanded Prussian blue analogues incorporating [Re6Se8(CN)6](3-/4-) clusters: adjusting porosity via charge balance

Face-capped octahedral [Re(6)Se(8)(CN)(6)](3-/4-) clusters are used in place of octahedral [M(CN)(6)](3-/4-) complexes for the synthesis of microporous Prussian blue type solids with adjustable porosity. The reaction between [Fe(H(2)O)(6)](3+) and [Re(6)Se(8)(CN)(6)](4-) in aqueous solution yields, upon heating, Fe(4)[Re(6)Se(8)(CN)(6)](3).36H(2)O (4). A single-crystal X-ray analysis confirms the structure of 4 to be a direct expansion of Prussian blue (Fe(4)[Fe(CN)(6)](3).14H(2)O), with [Re(6)Se(8)(CN)(6)](4-) clusters connected through octahedral Fe(3+) ions in a cubic three-dimensional framework. As in Prussian blue, one out of every four hexacyanide units is missing from the structure, creating sizable, water-filled cavities within the neutral framework. Oxidation of (Bu(4)N)(4)[Re(6)Se(8)(CN)(6)] (1) with iodine in methanol produces (Bu(4)N)(3)[Re(6)Se(8)(CN)(6)] (2), which is then metathesized to give the water-soluble salt Na(3)[Re(6)Se(8)(CN)(6)] (3). Reaction of [Co(H(2)O)(6)](2+) or [Ni(H(2)O)(6)](2+) with 3 in aqueous solution affords Co(3)[Re(6)Se(8)(CN)(6)](2).25H(2)O (5) or Ni(3)[Re(6)Se(8)(CN)(6)](2).33H(2)O (6). Powder X-ray diffraction data show these compounds to adopt structures based on the same cubic framework present in 4, but with one out of every three cluster hexacyanide units missing as a consequence of charge balance. In contrast, reaction of [Ga(H(2)O)(6)](3+) with 3 gives Ga[Re(6)Se(8)(CN)(6)].6H(2)O (7), wherein charge balance dictates a fully occupied cubic framework enclosing much smaller cavities. The expanded Prussian blue analogues 4-7 can be fully dehydrated, and retain their crystallinity with extended heating at 250 degrees C. Consistent with the trend in the frequency of framework vacancies, dinitrogen sorption isotherms show porosity to increase along the series of representative compounds 7, Ga(4)[Re(6)Se(8)(CN)(6)](3).38H(2)O, and 6. Furthermore, all of these phases display a significantly higher sorption capacity and surface area than observed in dehydrated Prussian blue. Despite incorporating paramagnetic [Re(6)Se(8)(CN)(6)](3-) clusters, no evidence for magnetic ordering in compound 6 is apparent at temperatures down to 5 K. Reactions related to those employed in preparing compounds 4-6, but carried out at lower pH, produce the isostructural phases H[cis-M(H(2)O)(2)][Re(6)Se(8)(CN)(6)].2H(2)O (M = Fe (8), Co (9), Ni (10)). The crystal structure of 8 reveals a densely packed three-dimensional framework in which [Re(6)Se(8)(CN)(6)](4-) clusters are interlinked through a combination of protons and Fe(3+) ions.