Optimized cleanup method for the determination of short chain polychlorinated n-alkanes in sediments by high resolution gas chromatography/electron capture negative ion-low resolution mass spectrometry

The performances of three adsorbents, i.e. silica gel, neutral and basic alumina, in the separation of short chain polychlorinated n-alkanes (sPCAs) from potential interfering substances such as polychlorinated biphenyls (PCBs) and organochlorine pesticides were evaluated. To increase the cleanup efficiency, a two-step cleanup method using silica gel column and subsequent basic alumina column was developed. All the PCB and organochlorine pesticides could be removed by this cleanup method. The very satisfying cleanup efficiency of sPCAs has been achieved and the recovery in the cleanup method reached 92.7%. The method detection limit (MDL) for sPCAs in sediments was determined to be 14 ng g⁻¹. Relative standard deviation (R.S.D.) of 5.3% was obtained for the mass fraction of sPCAs by analyzing four replicates of a spiked sediment sample. High resolution gas chromatography/electron capture negative ion–low resolution mass spectrometry (HRGC/ECNI–LRMS) was used for sPCAs quantification by monitoring [M−HCl]⁻ ions. When applied to the sediment samples from the mouth of the Daliao River, the optimized cleanup method in conjunction with HRGC/ECNI–LRMS allowed for highly selective identifications for sPCAs. The sPCAs levels in sediment samples are reported to range from 53.6 ng g⁻¹ to 289.3 ng g⁻¹. C₁₀- and C₁₁-PCAs are the dominant residue in most of investigated sediment samples.     

Separation of polychlorinated dibenzo-p-dioxins/furans,non-ortho/mono/di/tri/tetra-ortho-polychlorinated biphenyls,and polybrominated diphenyl ethers groups of compounds prior to their determination with large volume injection gas chromatography—Quadrupole ion storage tandem mass spectrometry

Polychlorinated dibenzo-p-dioxins/furans (PCDD/Fs), polychlorinated biphenyls (PCBs) and polybrominated diphenyl ethers (PBDEs) are important environmental contaminants. Their maximum legally allowable levels in food and environment are in the low pg g⁻¹ range. Therefore some highly selective and sensitive analytical methods must be used to determine them. Prior to final determination by GC/MS the cleaned-up samples have to be split into some fractions in view of large differences in concentrations of various analytes and existence of numerous chromatographic co-elutions (which in any case cannot be fully avoided). The aim of this study was to: (i) develop a robust, time-saving analytical method to isolate, clean-up and fractionate PCBs, PBDEs and PCDD/Fs prior to their determination with gas chromatography/ion trap mass spectrometry; (ii) assess method performance using laboratory validation data and some certified reference materials; (iii) use the developed method to assess PCB/PBDE/PCDD/F levels in samples of commercially available food. A combination of alumina, florisil, modified silica gel and two carbon columns were used for sample cleanup and fractionation. Separate fractions containing dioxins/furans, PBDE, non-ortho, mono-ortho and di-/tri-/tetra-ortho PCBs were obtained. The method statistical parameters were compatible with 1883/2006 EC Regulation (80–120%, RSD below 15%). The method performance was successfully used to evaluation of some real life food samples.     

Optimization of Soxtec Extraction for the Determination of Polychlorinated Biphenyls (PCBs) in Mussel and Comparison with Soxhlet Extraction,Accelerated Solvent Extraction,and Microwave Assisted Extraction

An on-line Soxtec extraction and cleanup method is optimized for PCBs determination in mussel samples. Soxtec extraction conditions have been optimized using two factorial designs. Optimized extraction parameters were sample weight, anhydrous sodium sulfate weight, solvent volume, alumina weight, and boiling and rinsing times. The results suggest that all PCBs congeners extracted by Soxtec appeared statistically affected by solvent volume. Soxtec quantitative recoveries (8– ?115%) were achieved for all PCBs and method precision (RSD <12%) was satisfactory. The optimized method is compared with three different applied extraction methods, Soxhlet, accelerated solvent extraction, and microwave-assisted extraction. This latter presents the cleanup step on column or assisted by polypropylene membranes. The extraction effectiveness of the four different applied extraction methods for the determination of PCBs in mussel was similar.     

Determination of Chlorinated Hydrocarbons Using Sep-Pak Cartridges and Gas Chromatography

Methods are described for the determination of chlorinated hydrocarbons at levels of parts per billion in water and nonaqueous environmental samples by gas chromatography with electron-capture detection. C₁₈, Florisil, alumina N and silica Sep-Pak cartridges were compared to evaluate their cleanup ability. The accuracy of the results of this analytical technique was proved by the analysis of a certified reference material (lake sediment EC-2).     

Effect of organic matter content in the trace analysis of triazines in various types of soils with GC-NPD

Summary Recent work demonstrated that the combination of microwave assisted solvent extraction (MASE) and capillary gas chromatography with selective nitrogen detection (GC-NPD) is a viable approach for the efficient determination of triazine herbicides in soils. However, for soils with a high organic matter content or the injection of more concentrated extracts to obtain lower LOD's the performance of gas chromatographic analysis of uncleaned extracts is hampered. This results in both a decrease of the chromatographic response of analytes and a decrease in the life time of the column due to coextracted matrix substances. The effect of various types of soils on the chromatographic analysis of triazine herbicides was studied. It appeared that for the investigated samples with an organic matter content below 5% processing of uncleaned extracts is possible. Samples with a higher organic matter content required a cleanup step. A rapid procedure on 100 mg silica cartridges has been developed using solvents compatible with the MASE extracts and the instrumental analysis. Beside the testing with different standard soils, about 120 samples of an ongoing monitoring program involving three different types of soil (organic matter content: 3–37%) were analysed. The selected compounds atrazine, desethylatrazine, desisopropyl-atrazine and simazine could be assayed in the various soil types to a level of at least 2 μg kg⁻¹. For soil samples with a high organic matter content (>5%), the rapid cleanup procedure allowed the trace analysis of the triazines and considerably increased the life time of the capillary column. Recoveries at levels from 2 to 50 μg kg⁻¹ ranged from 70 to 100% with RSDs ranging from 5.1 to 9.5%. Confirmation of positive samples was carried out by gas chromatography mass spectrometry.     

Determination of pesticides and PCBs in honey by solid-phase extraction cleanup followed by gas chromatography with electron-capture and nitrogen–phosphorus detection

A multiresidue method for determination of 15 organochlorine pesticides (OCPs), six polychlorinated biphenyls (PCBs), and seven organophosphorus pesticides (OPPs) is implemented for routine determinations of residues in honey. The method involves solid-phase extraction cleanup and determination by GC–ECD/NPD. Quantitation limits ranged from 0.1 to 0.6 g kg^–1 honey for OCPs and PCBs, and from 5.0 to 25.0 g kg^–1 honey for OPPs. Recoveries of OCPs ranged between 77.4 and 94.0%; for PCBs they were from 63.8 to 73.5%. Recovery assays for OPPs varied from 66.7 to 98.1%. The method was applied to the analysis of 111 honey samples from Aragón, Spain. The results obtained indicated a low level of contamination by pesticide residues and PCBs, which can contribute to ensuring the consumer has a safe wholesome supply of honey.     

Determination of some selected polycyclic aromatic hydrocarbons in environmental samples by high-performance liquid chromatography with fluorescence detection

Summary Analytical methods for the determination in environmental samples, of some selected Polycyclic Aromatic Hydrocarbons (PAH's), which are included on the EPA Priority Pollutant list, have been developed and evaluated. The methodology involves the extraction of PAH's from water samples by solvent extraction with dichloromethane. Solid samples were ultrasonically extracted with acetone/hexane and the extract was cleaned up on a silica gel/alumina column. The concentrated and cleaned up extracts were analysed by HPLC on a polymeric C₁₈ column using a gradient of acetonitrile/water as the mobile phase and fluorescence detection. Typical detection limits lie in the range of 1–30 ng ml^–1 of the analytes, but after sample pretreatment detection limits of 10–300 ng l^–1 were obtained. The extraction, clean-up and HPLC methodology was applied to the determination of selected PAH's in coal washings samples and the method was validated by the quantification of PAH's in a natural contaminated and a spiked sediment.     

Determination of total chlorine in waste oil

Summary A simple method has been developed to determine the concentration of organic chlorine in waste oil. The determination is based on the conversion of organic chlorine to inorganic chloride by reaction with sodium biphenyl followed by extraction with nitric acid and a mixture of nitric acid and water. The concentration of chloride is determined by direct potentiometry with an ion-selective electrode. The limit of determination amounts to 3·10^–5 mol·l^–1 chloride ions with a standard deviation of 3.5%. Different samples of waste oil have been analyzed and the results have been compared to those obtained by combustion in a H₂/O₂ flame followed by potentiometric titration with silver nitrate.     

Simple method for the determination of trace levels of pesticides in honeybees using matrix solid-phase dispersion and gas chromatography

A simple multiresidue method for the determination of insecticides in honeybees is described. The developed method is based on the matrix solid-phase dispersion technique. A total number of 12 insecticides (azinfos-methyl, buprofezin, chlorpyriphos, chlorpyriphos-methyl, diazinon, ethion, fenitrothion, fipronil, methidathion, phosalone, pirimicarb, propoxur) used on flowering fields are determined by this method. The method uses Florisil and silica as dispersing agents, alumina and silica as cleanup adsorbents and a low polarity solvent system to elute pesticide residues from the honeybee samples. The insecticides were quantified using capillary gas chromatography with a nitrogen-phosphorus detector. The method has shown good recovery (70-110%) for various levels of spiked samples (0.01-1.0 mg/kg). The relative standard deviations were in the range of 2-8% for all pesticides studied. The limits of detection were in the range of 0.005-0.05 mg/kg. The procedure can be applied for the determination of residues of low-polarity and medium polarity pesticides in honeybee samples.     

气相色谱-三重四极杆质谱同位素内标法测定鱼样中20种多氯联苯

建立了一种气相色谱-三重四极杆质谱结合双稳定性同位素内标检测鱼样中多氯联苯的方法。采用自动索氏提取器提取样品中的多氯联苯,经一根复合净化柱净化后,采用质谱多反应监测模式检测,选取两个独立的离子对。分析了20种多氯联苯,包含7种指示性多氯联苯,从三氯联苯到八氯联苯每族3个化合物,九氯联苯和十氯联苯各一个,每族使用一个相同氯代程度的¹³C₁₂标记多氯联苯作为定量内标、2种回收内标。20种多氯联苯在33 min内流出,分离良好,线性范围为0.05~10 μg/L,相关系数r均在0.99以上,低、中、高3种水平的加标回收率均在80.3%~117.6%之间,相对标准偏差（RSD,n=6）在5.09%~18.5%之间,方法检出限为0.01~0.02 μg/kg。20种多氯联苯总量在1.2~8.8 μg/kg（湿重）范围内,7个指示性多氯联苯总量在0.68~6.4 μg/kg（湿重）范围内。该方法缩短了分析时间,减少了有机溶剂的使用量,适合鱼样中多氯联苯的测定。     

Optimization and validation of organochlorine compounds in adipose tissue by SPE‐gas chromatography

Scientific evidence has shown an association between organochlorine compounds (OCC) exposure and human health hazards. Concerning this, OCC detection in human adipose samples has to be considered a public health priority. This study evaluated the efficacy of various solid‐phase extraction (SPE) and cleanup methods for OCC determination in human adipose tissue. Octadecylsilyl endcapped (C₁₈‐E), benzenesulfonic acid modified silica cation exchanger (SA), poly(styrene‐divinylbenzene (EN) and EN/RP₁₈ SPE sorbents were evaluated. The relative sample cleanup provided by these SPE columns was evaluated using gas chromatography with electron capture detection (GC–ECD). The C₁₈‐E columns with strong homogenization were found to provide the most effective cleanup, removing the greatest amount of interfering substance, and simultaneously ensuring good analyte recoveries higher than 70%. Recoveries > 70% with standard deviations (SD) < 15% were obtained for all compounds under the selected conditions. Method detection limits were in the 0.003–0.009 mg/kg range. The positive samples were confirmed by gas chromatography coupled with tandem mass spectrometry (GC‐MS/MS). The highest percentage found of the OCC in real samples corresponded to HCB, o,p′‐DDT and methoxychlor, which were detected in 80 and 95% of samples analyzed respectively. Copyright © 2012 John Wiley & Sons, Ltd.     

Multiresidue determination of organochlorine pesticides and polychlorinated biphenyls in milk by gas chromatography with electron-capture detection after extraction by matrix solid-phase dispersion

A multiresidue analytical method based on matrix solid-phase dispersion was developed to analyze liquid milk for 22 organochlorine pesticides (OCPs) and 6 polychlorinated biphenyls (PCBs). Initial extraction is performed by loading 3 mL milk onto a 2.0 g octadecyl (C18)-bonded silica cartridge with n-hexane as the eluant. Neutral alumina column chromatography with sodium sulfate as the drying agent is used for further cleanup. The eluate is concentrated to 0.5 mL, and target analytes are determined by capillary gas chromatography with electron-capture detection. The optimized method was validated by determining accuracy (recovery percentages), precision (repeatability and reproducibility), and sensitivity (detection and quantitation limits) from analyses of milk samples fortified at 10 and 1 microg/L levels. Average recoveries were between 74 and 106% for all residues except beta-HCH, beta-endosulfan, and endosulfan sulfate. Both repeatability and reproducibility relative standard deviation values were < 22% for all residues. Detection limits ranged from 0.02 to 0.12 microg/L and quantitation limits were between 0.02 and 0.62 microg/L. The proposed analytical method may be used as a fast and simple procedure in routine determinations of OCPs and PCBs in milk.     

Characterization of Fumed Alumina/Silica/Titania in the Gas Phase and in Aqueous Suspension

Fumed oxide alumina/silica/titania was studied in comparison with fumed alumina, silica, titania, alumina/silica, and titania/silica by means of XRD, ¹H NMR, IR, optical, dielectric relaxation, and photon correlation spectroscopies, electrophoresis, and quantum chemical methods. The explored Al₂O₃/SiO₂/TiO₂ consists of amorphous alumina (22 wt%), amorphous silica (28 wt%), and crystalline titania (50 wt%, with a blend of anatase (88%) and rutile (12%)) and has a wide assortment of Brønsted and Lewis acid sites, which provide a greater acidity than that of individual fumed alumina, silica, or titania and an acidity close to that of fumed alumina/silica or titania/silica. The changes in the Gibbs free energy (ΔG) of interfacial water in an aqueous suspension of Al₂O₃/SiO₂/TiO₂ are close to the ΔG values of the dispersions of pure rutile but markedly lower than those of alumina, anatase, or rutile covered by alumina and silica. The zeta potential of Al₂O₃/SiO₂/TiO₂ (pH of the isoelectric point (IEP) equals ≈3.3) is akin to that of fumed titania (pH(IEP_TiO2) ≈ 6) at pH > 6, but it significantly differs from the ζ of fumed alumina (pH(IEP_Al2O3) ≈ 9.8) at any pH value as well as those of fumed silica, titania/silica, and alumina/silica at pH < 6. The particle size distribution in the diluted aqueous suspensions of Al₂O₃/SiO₂/TiO₂ studied by means of photon correlation spectroscopy depends relatively slightly on pH in contrast to the titania/silica or alumina/silica dispersions. Theoretical calculations of oxide cluster interaction with water show a high probability of hydrolysis of Al–O–Ti and Si–O–Ti bonds strained at the interface of alumina/titania or silica/titania due to structural differences in the lattices of the corresponding individual oxides. Ab initio calculated chemical shift δ_H values of H atoms in different hydroxyl groups at the oxide clusters and in bound water molecules are in agreement with the ¹H NMR data and show a significant impact of charged particles (H₃O⁺ or OH⁻) on the average δ_H values of water droplets with (H₂O)_n at n between 2 and 48.     

离子阱串联质谱法检测鱼肉中指示性多氯联苯

建立了使用离子阱串联质谱技术和同位素稀释技术准确测定鱼肉中的7种指示性多氯联苯（PCB）单体的方法。方法的检出限为0．025—0．068ng／g,6个加标鱼样（添加水平1ng／g）中7个单体的回收率为87.2％～103.7％,RSD为3．2％-8．7％（n=6）。本方法定量准确可靠,可用于食品中指示性PCB的测定。     

A Large Volume Injection Procedure for GC-MS Determination of PAHs and PCBs

A simple on-column injection system for large volume of liquid samples for the GC-MS determination of traces of PAHs and PCBs has been investigated. A deactivated fused silica capillary 20 m × 0.53 mm I.D. and 2 meters of an HP5 column (0.53 mm,1 m film thickness) were used as retention gaps. Injection volumes of 80 L for PAHs and 90 L for PCBs, allow determination of 5–50 ng L^–1 PAHs and 11–44 ng L^–1 PCBs in hexane solution with an RSD of < 10%. The method has been used for the determination of PCBs and PAHs in soil sample.     

Multiresidue-matrix solid-phase dispersion method for determining 16 organochlorine pesticides and polychlorinated biphenyls in fish

Summary An effective, multiresidue-matrix, solid-phase dispersion — extraction (MSPD) and GC-MS method for the determination of 16 organochlorine pesticides (OCPs), as well as polychlorinated biphenyls (PCBs) from the level chlorination in fish is described. The method uses an octadecylsilyl-derivatized silica and Florisil-based MSPD co-column for direct, on-line clean-up. Recoveries calculated from five different fortification levels are >85% in all cases for OCPs, except for heptachlor and 4,4-DDT where recoveries of 78% and 81% are ob-tained, and >95% for PCBs. Detection limits determined for the OCPs vary from 19.6–91.1 ng g^–1, and from 71.4–111.2 ng g^–1 for the two to five chlorine-containing PCBs. The method has been applied to the analysis of fish grown in Er-Jen river (Taiwan) and method may serve as a screening protocol for the determination of OCPs and PCBs in fish.     

A new method for simultaneous determination of nitrogen,hydrogen and halogen in organic compounds

Summary A new method for the determination of nitrogen, hydrogen and halogen in organic compounds is described. It is based on flash combustion in a fast stream (100 ml/min) of an automatically generated gas mixture (CO₂+20% O₂). A sample placed in an aluminium capsule and mixed with about 20 mg of V₂O₅ is combusted in the presence of CO₃O₄ coated on porous silica. Rapid gravimetric methods for final determination of hydrogen and halogens and a volumetric method for nitrogen are used. The combustion process has been examined by a rapid photography technique, mass spectrometry and gas chromatography. From an extensive statistical analysis (about 300 analyses) of various compounds containing C, H, O, N, Br, Cl, I and S, the following precision is obtained:s _N=0.03–0.15%;s _H=0.09–0.14%;s=0.07–0.20% absolute. The automation of the final determination of nitrogen and hydrogen has been examined.

---

Eine neue Methode zur gleichzeitigen Bestimmung von Stickstoff, Wasserstoff und Halogen in organischen Verbindungen

Zusammenfassung Eine neue Methode zur Bestimmung von Stickstoff, Wasserstoff und Halogen wird beschrieben. Sie beruht auf der Entflammungsmineralisation in einem schnell fließenden (100 cm³/min) automatisch erzeugten Gasgemisch (CO₂+20% O₂). Die Probe wird in einer Aluminiumkapsel mit etwa 20 mg V₂O₅ vermischt und in Gegenwart von CO₃O₄ auf porösem Siliziumdioxid verbrannt. Zur Endbestimmung von Wasserstoff und Halogenen wurden schnelle, gravimetrische Methoden angewandt (die Jodogravimetrie für Halogene), während der Stickstoff gasvolumetrisch erfaßt wird. Zur Überprüfung des Verbrennungsprozesses wurden die Photographie, die Massenspektrometrie und die Gaschromatographie eingesetzt. Statistische Auswertung der Analysenergebnisse (etwa 300 Analysen) für verschiedene C-, H-, O-, N-, Br-, Cl-, J- und S-haltige Verbindungen ergab die folgenden Standardabweichungen:s _N=0,03–0,15 %;s _H=0,09–0,14% unds _X= 0,07–0,20% absolut. Die Möglichkeiten einer Automatisierung der Bestimmungsverfahren von Stickstoff und Wasserstoff wurden geprüft.

     

An analytical multi-residue approach for the determination of semi-volatile organic pollutants in pine needles

Vegetation (and pine needles in particular) has been widely used as an alternative to other conventional sampling devices to assess the atmospheric presence of semi-volatile organic contaminants (SVOCs). While most analytical procedures developed focus only on one or two chemical classes, this this work intends to establish a multi-component protocol to quantify brominated flame-retardants (BFRs), polychlorinated biphenyls (PCBs), organochlorine pesticides (OCPs), polynuclear aromatic hydrocarbons (PAHs) and one class of contaminant of emerging concern, the synthetic musks fragrances (SMCs). Pine needles extracts were obtained by ultrasonic solvents extraction (USE), and different cleanup approaches using solid-phase extraction (SPE) employing combinations of sorbents and solvents as well as gel permeation chromatography (GPC) were tested. SPE with alumina followed by GCP yielded the best results, with average recoveries over 80%.     

GC-MS analysis of the PCB substitute Ugilec 141 and its occurrence in waste mineral oils

After the restrictions on production and use of PCBs, Ugilec 141, a technical mixture of dichlorobenzyldichlorotoluenes (DBDTs), has been used as a PCB substitute in hydraulic systems. In the Netherlands, the production, import and use of Ugilec 141 has been forbidden since 1988. A method has been developed for the analysis of Ugilec 141 in waste mineral oils to control waste oil import and processing. The method development was based on modification of procedures for the analysis of PCBs in oil and dioxins in fatty matrices and analysis was performed with gas chromatography with mass spectrometry. For sample clean-up, several combinations of column chromatography with activated carbon, alumina, and silica gel have been tested to obtain extracts free from matrix interferences. An internal standard of ¹³C-labeled DBDT was examined to check recoveries from the clean-up procedures. Quantification was performed by comparison with the six most abundant peaks of an external Ugilec 141 standard mixture. Validation experiments showed a linear range from 0.25 to 60 mg Ugilec 141 kg^?1 oil, a reproducibility of 3% and a limit of determination of 0.25 mg Ugilec 141 kg^?1 waste oil. The method was applied in a survey of 70 samples of waste mineral oils from producers all over the Netherlands; this revealed levels below the limit of determination and one positive sample with a concentration of 5.7±0.1 mg Ugilec 141 kg^?1 oil. In an inspection inquiry, one contaminated oil was found containing 116 ± 9 g Ugilec 141 kg^?1 oil.     

Determination of sulfur-containing amino acid residues in proteins by pyrolysis-gas chromatography with flame photometric detection

Summary A new method for the determination of sulfur-containing amino acid residues, cysteine (Cys) and methionine (Met) in proteins has been developed with pyrolysis-gas chromatography. Characteristic sulfur compounds among the complicated pyrolysis products formed from protein samples were separated by using a high resolution fused silica capillary column and selectively detected by flame photometric detector (FPD). In order to improve the reproducibility, an internal standard substance, benzothiophene, was pyrolyzed at 600 °C together with the protein samples. Thus the observed pyrograms were interpreted in terms of the compositional analysis. On the basis of the relative peak intensities of CH₃SH and H₂S, the simultaneous determinations of Cys and Met residues in various enzyme proteins were successfully carried out with 10–12% and 5–6% of relative standard deviations, respectively.

---

Bestimmung von schwefelhaltigen Aminosäureresten in Proteinen durch Pyrolyse-GC mit flammenphotometrischer Detektion