One-pot synthesis of 1,2,4-oxadiazoles from carboxylic acid esters and amidoximes using potassium carbonate

A convenient one-pot synthesis of 1,2,4-oxadiazoles is described. The condensation of carboxylic acid esters and amidoximes in the presence of potassium carbonate was employed to synthesize a variety of mono-, bis- and tris-oxadiazoles in moderate to excellent yields.     

A Preferred Synthesis of 1,2,4‐Oxadiazoles

Abstract

An efficient and high‐yielding one‐pot synthesis of 1,2,4‐oxadiazoles from carboxylic acids and amidoximes is described. Activation of the carboxylic acid using hydroxybenzotriazole (HOBt) and EDC/HCl followed by reaction with an amidoxime generates an oxime ester. Without isolation, the oxime ester is dehydrated to give the oxadiazole ring.     

Room-temperature synthesis of pharmaceutically important carboxylic acids bearing the 1,2,4-oxadiazole moiety

An efficient and mild one-pot protocol has been developed for the synthesis of 1,2,4-oxadiazoles via the reaction of amidoximes with dicarboxylic acid anhydrides in a NaOH/DMSO medium. The method allows the synthesis of diversely substituted carboxylic acids bearing the 1,2,4-oxadiazole motif, – a popular building block for pharmaceutical research, in moderate to excellent yields. The reaction scope includes aromatic and heteroaromatic amidoximes as well as five-, six- and seven-membered anhydrides. The advantages of this procedure are proven gram-scalability and the use of inexpensive starting materials, which from a process chemistry point of view are essential for future industrial applications.     

Facile room-temperature assembly of the 1,2,4-oxadiazole core from readily available amidoximes and carboxylic acids

A one-pot ambient-temperature procedure for the synthesis of 3,5-disubstituted-1,2,4-oxadiazoles from amidoximes and carboxylic acids under superbase-promoted conditions is reported.     

The reaction of amidoximes with carboxylic acids or their esters under high-pressure conditions

Russian Chemical Bulletin - 3,5-Disubstituted 1,2,4-oxadiazoles were synthesized by the reaction of amidoximes with carboxylic acids or their esters under high-pressure conditions (10 kbar). The...     

Rapid and efficient synthesis of 1,2,4-oxadiazoles utilizing polymer-supported reagents under microwave heating

1,2,4-Oxadiazoles can be rapidly and efficiently synthesized from a variety of readily available carboxylic acids and amidoximes using either method A or method B. The use of commercially available polymer-supported reagents combined with microwave heating resulted in high yields and purities of the product 1,2,4-oxadiazoles in an expeditious manner. [structure: see text]     

A fast and efficient one-pot microwave assisted synthesis of variously di-substituted 1,2,4-oxadiazoles

A one-pot two-step microwave assisted synthesis of variously disubstituted 1,2,4-oxadiazoles from carboxylic acids and amidoximes is reported. This methodology is characterized by short reaction times, is versatile, robust and high-yielding and allows for the preparation of heterocycles with a stereocenter with 100% enantiomeric purity.     

dM-Dim for carboxylic acid protection

The 1,3-dithian-2-yl-methyl (Dim) and its analogous groups including dimethyl-Dim (dM-Dim) can provide a new dimension of orthogonality for carboxylic acid protection. They can be deprotected under nearly neutral oxidative conditions. In this paper, the protection of carboxylic acid with dM-Dim, deprotection of dM-Dim ester with sodium periodate, stability of dM-Dim protected carboxylic acid under acidic and basic conditions, and selective deprotection of dM-Dim protected carboxylic acids in the presence of tertiary butyl and methyl esters are presented.     

Rearrangements of 1-oxa-2-azoles. 4. Synthesis and rearrangement of isoxazole- and 4,5-dihydroisoxazole-3-carboxylic acid amidoximes

Isoxazole- and 4,5-dihydroisoxazole-3-carboxylic acid amidoximes were obtained in the reaction of 5-trifluoromethyl-1,2,4-oxadiazole-3-carbohydroximic acid bromide in the presence of sodium bicarbonate with monosubstituted ethylenes and acetylenes with subsequent opening of the oxadiazole ring. Amidoximes of the isoxazole series undergo rearrangement to aminofurazans under the influence of alkalis.See [1] for Communication 3.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 6, pp. 827–832, June, 1991.     

Optimising oxygen-sensitivity of optical sensor using pyrene carboxylic acid by myristic acid co-chemisorption onto anodic oxidized aluminium plate

Optical oxygen-sensitivity using pyrene carboxylic acid with long alkyl chain (1-pyrenedecanoic acid and 1-pyrenedodecanoic acid) and myristic acid co-chemisorption layer was controlled by varying the molar ratio of myristic acid to pyrene carboxylic acid. The ratio I₀/I₁₀₀, where I₀ and I₁₀₀ represent the detected fluorescence intensities from a substrate exposed to 100% argon and 100% oxygen, respectively, is used as an indicator of the sensitivity of the sensing film. At a composition ratio of 1 pyrene carboxylic acid to 10 myristic acids, the I₀/I₁₀₀ attained its maximum value and then the ratio decreased with increase in the molar ratio of myristic acid to pyrene carboxylic acid. The Stern-Volmer constant (K_SV) also attained its maximum value at a composition ratio of one pyrene carboxylic acid to ten myristic acids and then the ratio decreased with increase in the molar ratio of myristic acid to pyrene carboxylic acid. The oxygen-sensitivity of optical sensor using pyrene carboxylic acid is optimized by myristic acid co-chemisorption.     

Rearrangements of 1-oxa-2-azoles. 3. Rearrangement of 1,2,4-oxadiazole-3-carboxylic acid amidoximes

The rearrangement of unsubstituted 1,2,4-oxadiazole-3-carboxylic acid amidoxime and its N-isopropyl derivative to an aminofurazan is catalyzed by ammonia, while in the case of the amidoxime containing a piperidino substituent the rearrangement is catalyzed by acids. In ammonium hydroxide the piperidino and imidazolyl derivatives are converted to cyano amidoximes as a result of opening of the oxadiazole ring.See [1] for Communication 2.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 6, pp. 822–826, June, 1991.     

Unique self-anhydride formation in the degradation of cytidine-5'-monophosphosialic acid (CMP-Neu5Ac) and cytidine-5'-diphosphosialic acid (CDP-Neu5Ac) and its application in CMP-sialic acid analogue synthesis

Sialyloligosaccharides are synthesised by various glycosyltransferases and sugar nucleotides. All of these nucleotides are diphosphate compounds except for cytidine-5'-monophosphosialic acid (CMP-Neu5Ac). To obtain an insight into why cytidine-5'-diphosphosialic acid (CDP-Neu5Ac) has not been used for the sialyltransferase reaction and why it is not found in biological organisms, the compound was synthesised. This synthesis provided the interesting finding that the carboxylic acid moiety of the sialic acid attacks the attached phosphate group. This interaction yields an activated anhydride between carboxylic acid and the phosphate group and leads to hydrolysis of the pyrophosphate linkage. The mechanism was demonstrated by stable isotope-labelling experiments. This finding suggested that CMP-Neu5Ac might also form the corresponding anhydride structure between carboxylic acid and phosphate, and this seems to be the reason why CMP-Neu5Ac is acid labile in relation to other sugar nucleotides. To confirm the role of the carboxylic acid, CMP-Neu5Ac derivatives in which the carboxylic acid moiety in the sialic acid was substituted with amide or ester groups were synthesised. These analogues clearly exhibited resistance to acid hydrolysis. This result indicated that the carboxylic acid of Neu5Ac is associated with its stability in solution. This finding also enabled the development of a novel chemical synthetic method for CMP-Neu5Ac and CMP-sialic acid derivatives.     

High-performance CE: an effective method to study lactonization of alpha2,8-linked oligosialic acid

A sensitive and efficient method using high-performance CE (HPCE) and neuraminidase hydrolysis was developed to study the lactonization and hydrolysis of alpha2,8-pentasialic acid. Eleven lactone species of pentasialic acid formed in glacial acetic acid were detected and classified into three groups based on the number of carboxylic acids: monolactones with four carboxylic acids, dilactones with three carboxylic acids, and trilactones with two carboxylic acids. These lactones eluted between the original pentamer (with five carboxylic acids) and the fully lactonized species (with one carboxylic acid) in HPCE. Eight of the isomers were identified by hydrolysis with neuraminodase. Results obtained from previous reports and from this study together reveal a general rule for predicting the subtle difference in the acidity of each carboxylic acid in oligosialic acids: the closer the carboxylic acid is to the nonreducing end, the more acidic it is. Therefore, the elution order of lactone isomers having the same number of carboxylic groups can be predicted from the position of the free carboxylic groups in pentasialic acid. We used this principle and the results of hydrolysis with neuraminidase to identify hexamer lactone isomers separated by HPCE.     

Modelling the vibrational behaviour of the cyclic carboxylic acid dimer. SQM force field of the formic acid dimer

The vibrational behaviour of the cyclic carboxylic acid dimer is modelled through the scaled quantum mechanical (SQM) force field of the cyclic formic acid dimer. The results indicate that the SQM force field technique is very well applicable to hydrogen bonded molecules. The frequency shifts observed on hydrogen bonding can be related to the shifts observed on lowering the temperature. This study also confirms that a clear distinction between cyclic carboxylic acid dimers and catamers can be made through the difference between infrared and Raman frequencies, and it is proved here that these conditions are also valid for weaker hydrogen bonded cyclic carboxylic acid dimers.     

Mild and efficient boronic acid catalysis of Diels-Alder cycloadditions to 2-alkynoic acids

The concept of boronic acid catalysis (BAC) for the activation of unsaturated carboxylic acids is applied to the Diels-Alder cycloaddition between 2-alkynoic acids as dienophiles and various dienes. These [4+2] cycloadditions produce cyclohexadienyl carboxylic acids, which can be oxidized in situ to produce polysubstituted aromatic carboxylic acids. The boronic acid catalyst is suspected to provide activation by a LUMO-lowering effect of the unsaturated carboxylic acid likely via a covalent, monoacylated hemiboronic ester intermediate.     

Gas chromatographic determination of carboxylic acid chlorides and residual carboxylic acid precursors used in the production of some penicillins.

An improved gas chromatographic method is described for the simultaneous determination of carboxylic acid chlorides and related carboxylic acids used in the production of some commercial semisynthetic penicillins. The acid chloride reacts with diethylamine to form the corresponding diethylamide. Carboxylic acid impurities are converted to trimethylsilyl esters. The two derivatives are separated and quantitated in the same chromatographic run. This method, an extension of the earlier procedure of Hishta and Bomstein (1), has been applied to the acid chlorides used to make oxacillin, cloxacillin, dicloxacillin, and methicillin (Figure 1); it shows promise of application to other acid chlorides. The determination is more selective than the usual titration methods, which do not differentiate among acids with similar pK's. Relative standard deviations of the acid chloride determination are 1.0-2.5%. Residual carboxylic acid can be repetitively determined within a range of 0.6% absolute.     

The binding sites of carboxylic acid group contacting to Cu electrode

In this work, the binding sites of carboxylic acid binding to Cu electrode are explored by electrochemical jump-to-contact STM break junction. Single molecular conductance of benzene-based molecules with ending groups of carboxylic acid, carbonyl and hydroxyl are measured and compared. The conductance values of 1,4-benzenedicarboxaldehyde can be found in those of 1,4-benzenedicarboxylic acid, which shows that carboxylic acid can bind to Cu electrode through carbonyl group. Carboxylic acid can also bind to the electrode through carboxylate group, and gives out larger conductance values than those of carbonyl group. However, molecule with hydroxyl group is difficult to form single molecular junction with Cu. The current work demonstrates that the carboxylic acid can bind to the electrode through carbonyl and carboxylate groups, and a new anchoring group of carbonyl group can be used to form effective single molecular junction.     

Electrospray ionization mass spectrometric studies of some imidazole amidoximes and nitrolic acids and their esters

The fragmentations of the [M+H]+ ions of imidazole amidoximes, and nitrolic acids and their esters, were studied by collision-induced dissociation experiments and by determining the accurate masses of the product ions on an electrospray ionization Fourier transform ion cyclotron resonance mass spectrometer. The fragmentation pathways of the amidoximes varied with the substituent in the imidazole ring at position 1N, allowing two regioisomers to be distinguished. Nitrolic acids decompose in solution to nitrile oxides, and the studied nitrolic acid behaved in the same way in the gas phase. The esters decompose similarly to their parent compounds.     

The role of salicylic acid, L-ascorbic acid and oxalic acid in promoting the oxidation of alkenes with H2O2 catalysed by [MnIV2(O)3(tmtacn)2]2+

The role played by the additives salicylic acid, L-ascorbic acid and oxalic acid in promoting the catalytic activity of [MnIV2(O)3(tmtacn)2](PF6)2 (1(PF6)2, where tmtacn = N,N',N'-trimethyl-1,4,7-triazacyclononane) in the epoxidation and cis-dihydroxylation of alkenes with H2O2 and in suppressing the catalysed decomposition of H2O2 is examined. Whereas aliphatic and aromatic carboxylic acids effect enhancement of the catalytic activity of 1 through the in situ formation dinuclear carboxylato bridged complexes of the type [MnIII2(mu-O)(mu-RCO2)2(tmtacn)2]2+, for L-ascorbic acid and oxalic acid notable differences in reactivity are observed. Although for L-ascorbic acid key differences in the spectroscopic properties of the reaction mixtures are observed compared with carboxylic acids, the involvement of carboxylic acids formed in situ is apparent. For oxalic acid the situation is more complex with two distinct catalyst systems in operation; the first, which engages in epoxidation only, is dominant until the oxalic acid additive is consumed completely at which point carboxylic acids formed in situ take on the role of additives to form a second distinct catalyst system, i.e. that which was observed for alkyl and aromatic carboxylic acids, which yield both cis-diol and epoxide products.     

α-(1H-Imidazol-1-yl)alkyl (IMIDA) carboxylic acid esters as prodrugs of carboxylic acid containing drugs

Synthesis of α-(1H-imidazol-1-yl)alkyl (IMIDA) carboxylic acid esters have been reported in 2-3 simple steps. α-(1H-Imidazol-1-yl)alkyl (IMIDA) carboxylic acid esters were found to be chemically labile and thus serve as novel prodrugs of carboxylic acids.