Lithium chloride: an active and simple catalyst for cyanosilylation of aldehydes and ketones

LiCl acts as a highly effective catalyst for cyanosilylation of various aldehydes and ketones to the corresponding silylated cyanohydrins. The reaction proceeds smoothly with a substrate/catalyst molar ratio of 100-100,000 at 20-25 degrees C under solvent-free conditions. alpha,beta-Unsaturated aldehydes are completely converted to the 1,2-adducts. The cyanation products can be isolated by direct distillation of the reaction mixture.     

Asymmetric synthesis of syn-alpha-substituted beta-amino ketones by using sulfinimines and prochiral Weinreb amide enolates

Syn-alpha-substituted beta-amino Weinreb amides are new chiral building blocks for asymmetric synthesis of syn-alpha-substituted beta-amino acids, aldehydes, and ketones and are prepared by addition of prochiral lithium enolates of Weinreb amides to sulfinimines (N-sulfinyl imines).     

Separation and determination of terbinafine and its four impurities of similar structure using simple RP-HPLC method

A novel reversed-phase HPLC method for the simultaneous determination of active component terbinafine, its one impurity 1-methylaminomethylnaphtalene and three degradation products, β-terbinafine, Z-terbinafine and 4-methyl-terbinafine occurring in pharmaceutical formulations after long-term stability tests, was developed and validated using propylparaben as an internal standard.The chromatographic separation was performed on a NUCLEOSIL 100-5-CN column, mobile phase for separation of all compounds consisted of a mixture of tetrahydrofurane, acetonitrile and citrate buffer pH 4.50 (10:20:70, v/v/v). The analysis time was less than 32 min at flow-rate of 0.8 ml min⁻¹. UV detection was performed at 226 nm. The method was validated and system suitability parameters were investigated. Method robustness and short-term standard solution stability were verified. Limits of detection for terbinafine degradation products/impurity were from 0.023 to 0.098 μg ml⁻¹, limits of quantitation were from 0.078 to 0.327 μg ml⁻¹. The method was applicable for routine determination of terbinafine and all its found impurities of similar structure with sufficient selectivity, precision and accuracy.     

Photochemical α-bromination of ketones using N-bromosuccinimide: a simple, mild and efficient method

Aromatic and aliphatic carbonyl compounds undergo facile bromination with N-bromosuccinimide under UV-vis irradiation to give the corresponding α-brominated ketones in good yields, at low temperatures (30 °C), without any catalyst, catalyst support or radical initiator and within a short time.     

Catalytic addition of metallo-aldehyde enolates to ketones: a new C-C bond-forming hydrogenation

The first catalytic cross-aldolization of metallo-aldehyde enolates with ketone acceptors is enabled via hydrogenation of keto-enals with cationic rhodium catalysts. These results, in conjunction with prior studies involving the catalytic hydrogen-mediated reductive coupling of enones, dienes, and diynes with carbonyl acceptors, support the feasibility of developing a broad new class of catalytic C-C bond formations based on the electrophilic trapping of hydrogenation intermediates. [reaction: see text]     

A simple and versatile method for the synthesis of acetals from aldehydes and ketones using bismuth triflate

Acetals are obtained in good yields by treatment of aldehydes and ketones with trialkyl orthoformate and the corresponding alcohol in the presence of 0.1 mol % Bi(OTf)3.4H2O. A simple procedure for the formation of acetals of diaryl ketones has also been developed. The conversion of carbonyl compounds to the corresponding 1,3-dioxolane using ethylene glycol is also catalyzed by Bi(OTf)3.4H2O (1 mol %). Two methods, both of which avoid the use of benzene, have been developed.     

Glycine enolates: the effect of formation of iminium ions to simple ketones on alpha-amino carbon acidity and a comparison with pyridoxal iminium ions

Equilibrium constants in D2O were determined by 1H NMR analyses for formation of imines/iminium ions from addition of glycine methyl ester to acetone and from addition of glycine to phenylglyoxylate. First-order rate constants, also determined by 1H NMR, are reported for deuterium exchange between solvent D2O and the alpha-amino carbon of glycine methyl ester and glycine in the presence of increasing concentrations of ketone and Br?nsted bases. These rate and equilibrium data were used to calculate second-order rate constants for deprotonation by DO- and by Br?nsted bases of the alpha-imino carbon of the ketone adducts. Formation of the iminium ion between acetone and glycine methyl ester and between phenylglyoxylate and glycine is estimated to cause 7 unit and 15 unit decreases, respectively, in the pKa's of 21 and 29 for deprotonation of the parent carbon acids. The effect of formation of iminium ions to phenylglyoxylate and to 5'-deoxypyridoxal (DPL) [Toth, K.; Richard, J. P. J. Am. Chem. Soc. 2007, 129, 3013-3021] on the carbon acidity of glycine is similar. However, DPL is a much better catalyst than phenylglyoxylate of deprotonation of glycine, because of the exceptionally large thermodynamic driving force for conversion of the amino acid and DPL to the reactive iminium ion.     

A simple stopped-flow method with continuous pumping for the spectrophotometric flow-injection determination of boron in plants

An alternative way of stopping a processed sample inside a flow-through detector is proposed. A commutating device permits the peristaltic pump to operate continuously, thus avoiding problems associated with the pump inertia often found in analyzers requiring pump stoppage. The feasibility of the approach is demonstrated by improving the spectrophotometric determination of boron in plants, which is based on a relatively slow reaction. Effects of commutating times, flow rates, manifold dimensions and reagent concentrations are studied. With the same analytical frequency (60 h^?1) and azomethine-H consumption (2.1 mg per sample) of the original procedure, the proposed system provides better sensitivity because of a three-fold increase in the sample-processing time and the absence of significant sample dispersion. Reproducible results (r.s.d. for typical samples usually less than 1%) are in agreement with those obtained with the original procedure.     

Highly stereoselective aldol reactions of titanium enolates from lactate-derived chiral ketones

[reaction: see text] Highly stereoselective titanium-mediated aldol reactions based on lactate-derived ketones are reported. The stereochemical outcome of the process depends on the protecting group (PMB or Bn) and the Lewis acid (i-PrOTiCl(3) or TiCl(4)) used in the enolization step, the corresponding anti-syn or syn-syn aldols being prepared in high yields and with diastereomeric ratios up to 99:1.     

Some useful data of continuous variation method

Summary Conditions for the correct application of continuous variation are presented. The data (parameterR _mn , effective stability constant and total concentration) that enable a safe determination of the molar ratio metalligand (m/n) in the complex are computed. The possibility of the determination of true valuesm andn and effective stability constant from one continuous variation curve are discussed and demonstrated on the example of the iron(III)-chrome azurol S complex.

---

Einige nützliche Daten zur Methode der kontinuierlichen Variation

Zusammenfassung Bedingungen für die korrekte Anwendung der Methode der kontinuierlichen Variation werden gegeben. Die Daten (ParameterR _mn effektive Stabilitätskonstante und Gesamtkonzentration), die eine zuverlässige Bestimmung des molaren Verhältnisses MetallLigand (m/n) im Komplex ermöglichen, werden berechnet. Die Möglichkeit zur Bestimmung der wahren Werte fürm undn sowie der effektiven Stabilitätskonstanten aus einer Kurve der kontinuierlichen Variation werden erörtert und am Beispiel des Eisen(III)-Chromazurol S-Komplexes demonstriert.

     

Characterization of metal-deferoxamine complexes by continuous variation method: A new approach using capillary zone electrophoresis

Siderophores are low molecular weight non-ribosomal peptides with extremely high affinity by iron. However, other metals present affinity for siderophores but to a smaller degree. Deferoxamine is an example of a bacterial hydroxamic siderophore, which was investigated herein. Capillary zone electrophoresis (CZE) was used as a new approach in the continuous variation method for the characterization of metal-deferoxamine complexes. A set of samples containing both metal (e.g., Fe(III), Fe(II) or Ni(II)) and siderophore with different molar ratios was prepared and analyzed by both CZE and UV-vis spectrophotometry. A phosphate buffer pH 8.0 was used as the background electrolyte in the first case due to best complex and free ligand peaks resolution. The Job's plots obtained from complex peak areas (complex concentration) versus metal molar fraction revealed complexes stoichiometries of M : L of 2 : 3, 1 : 2 and 1 : 1 for Fe(III), Fe(II) and Ni(II) complexes, respectively. Conditional formation constants could also be calculated for Fe(III) and Fe(II) complexes as K_f = 1.03 × 10¹³ and 2.47 × 10⁴, respectively. UV-visible spectrophotometric analysis confirmed the data obtained for Fe(III)-complex.     

Conjugate additions of cyclic oxygen-bound nickel enolates to alpha,beta-unsaturated ketones

The reaction of nickel enolates displaying a metallacyclic structure with the alpha,beta-unsaturated ketones methyl vinyl ketone (MVK) or methyl propenyl ketone (MPK) takes place in two stages, affording initially bicyclic adducts, which subsequently isomerize to the corresponding open-chain products. The former are generated with high stereoselectivity and can be considered as the products of the [2+4] cycloaddition of the enolate to the enone. The ring opening process involves a prototropic rearrangement that can be catalyzed by water. In the case of the reaction of the parent nickel enolate complex 1 (which displays an unsubstituted Ni-O=C(R)CH2 arrangement) with MVK, a double-addition process has been observed, consisting of two successive cycloaddition/isomerization reactions. The carbonylation of the different cyclic and noncyclic products affords the corresponding lactones that retain the stereochemistry of the organometallic precursors. This methodology allowed trapping the primary product of the reaction of 1 with MPK as the corresponding organic lactone, demonstrating that the cycloaddition process takes place with exo selectivity. DFT modeling of the latter reaction provides further support for a quasi-concerted cycloaddition mechanism, displaying a nonsymmetric transition state in which the C-C and the C-O bond are formed in an asynchronous manner.     

Aluminum enolates via retroaldol reaction: catalytic tandem aldol-transfer—Tischtschenko reaction of aldehydes with aldol adducts of ketones to ketones

Bidentate aluminum chelates derived from biphenol, binaphthol and catechol were found to be efficient catalysts for aldol-transfer reactions of ketone to ketone aldol adducts with aliphatic or aromatic aldehydes giving rise to the formation of aldol adducts of ketones to the aldehydes. In the presence of an excess of an aliphatic aldehyde, a catalytic tandem aldol-transfer—Tischtschenko reaction is observed. The tandem reaction produces monoesters of 1,3-diols with high anti selectivity and with modest to good chemical yield. 1,2-Unsaturated aldehydes are less reactive in the aldol-transfer reaction and require 2-4 times higher load of the catalyst to be used than aliphatic and aromatic aldehydes. Poor diastereoselectivity was observed in the formation of α-substituted aldols and 2-substituted monoesters of anti-1,3-diols indicating that the aldol-transfer reaction is not diastereoselective with the catalysts studied. The utility of the highly 1,3-anti selective formation of diolmonoesters was found to be limited by acyl migration.     

Reaction of allylzinc reagents and zinc enolates of ketones with alpha-amidoalkylphenyl sulfones

Alpha-amidoalkylphenyl sulfones behave as N-acylimino equivalents in the reaction with functionalized allylzinc reagents. The addition products obtained using the zinc derivative of ethyl 2-(bromomethyl)acrylate can be readily transformed into alpha-methylene-gamma-lactams using different cyclization procedures. The allylzinc reagent obtained from 3-bromo-1-acetoxy-1-propene directly affords protected 1,2-amino alcohols with a preference for the anti stereoisomer, regardless of the structure of the alpha-amidoalkylphenyl sulfone employed. This procedure can be extended to the use of zinc enolates obtained from alpha-bromo ketones and leads to the synthesis of N-protected beta-amino ketones.     

Direct determination of scattering time delays using the S-matrix version of the Kohn variation method

A direct method for determining time delays for scattering processes is developed using the S-matrix version of the Kohn variation method recently reported by Miller. In this paper we develop a procedure for simultaneously determining both the S matrix and its energy derivative. Since only a small number of additional terms are needed to generate the energy derivative of the S matrix, this yields a direct method for determining scattering time delays that should be more attractive than the traditional methods based on numerical differentiation of #S#-matrix elements calculated at many closely spaced energies.     

A simple method for a determination

The a term is a primary parameter that is used to indicate the deviation of the epithermal neutron distribution in the k ₀-standardization method of neutron activation analysis, k ₀-NAA. The calculation of a using a mathematical procedure is a challenge for some researchers. The calculation of a by the "bare-triple monitor" method is possible using the dedicated commercial software KAYZERO^®/SOLCOI^®. However, when this software is not available in the laboratory it is possible to carry out the calculation of a applying a simple iterative linear regression using any spreadsheets. This approach is described in this paper. The experimental data used in the example were obtained by the irradiation of a set of suitable monitors in the NAA #1 irradiation channel of the HANARO research reactor (KAERI, Korea). The results obtained by this iterative linear regression method agree well with the results calculated by the validated mathematical method.     

Diastereoselective aldol reactions of enolates generated from vicinally substituted trimethylsilylmethyl cyclopropyl ketones

[reaction: see text] Vicinally substituted trimethylsilylmethyl cyclopropyl ketones undergo facile desilylative ring opening with Lewis acids under mild conditions. The enolates, thus generated, undergo aldol addition with aldehydes and ketones. The diastereoselectivity of the reaction with aldehydes depends on the nature of the Lewis acid used. The resulting aldol product is easily converted into a substituted tetrahydrofuran derivative.