Dual modulation of a molecular switch with exceptional chiroptical properties

The ability to modulate the chiroptical properties of optically active molecules induced by external stimuli such as light, heat, and electrical fields allows for the design and development of molecular switches, memory devices, sensors, and photonic devices. A helical o-terphenyl compound functionalized with photoresponsive azobenzene and electroactive imide groups is designed as a dual-mode chiroptical molecular switch. Its exceptional optical activity (e.g., [alpha]436 = -9500) can be changed and modulated through photoisomerization of the azobenzene moiety using UV and visible light. Reversible modulation by electrochemical means was also achieved through the redox reaction occurring at the imide group. Large chiroptical read-out signals were observed during the redox cycles as indicated by the molar ellipticity values as high as 285,000 deg.cm2.dmol-1. Exceptionally high optical activity and large responses to both light and electrical bias make this chiral molecule suitable for the development of new molecular switches, sensors, and other optical devices.     

Structure and phase transitions of a liquid crystalline polymer

Summary The structures, textures as well as thermodynamic properties of a side chain polymer exhibiting a liquid crystalline phase in addition to a partially crystalline state and the isotropic fluid state were investigated. Furthermore the kinetics of phase transitions between these states were analyzed. It was found that the properties of this polymer are intermediate between that of low molecular weight liquid crystals and common polymers. In particular it was observed that the relation between the liquid crystalline texture and the structure is different from that of low molecular weight liquid crystals and that the properties of the crystalline and liquid crystalline state depend strongly on the tacticity of the polymer.

---

Zusammenfassung Für ein Seitenkettenpolymeres, das zusätzlich zum teilkristallinen Zustand und zur isotropen Schmelze einen flüssig-kristallinen Zustand aufweist, wurden die Strukturen und Texturen untersucht sowie thermodynamische Eigenschaften. Außerdem wurde die Kinetik der Phasenumwandlungen analysiert. Es zeigt sich, daß die Eigenschaften zwischen denen üblicher Polymerer und denen von niedrigmolekularen flüssigen Kristallen liegen. Insbesondere zeigte sich, daß die Beziehung zwischen molekularer Struktur und Textur von der bei niedrigmolekularen flüssigen Kristallen abweicht, und daß die Taktizität der Kette einen starken Einfluß auf die Eigenschaften nicht nur der kristallinen Phase sondern auch der flüssig-kristallinen Phase ausübt.

     

Side chain functionalized liquid crystalline polymers and blends, 1. Reentrant nematic phase formation in hydrogen-bonded blends of liquid crystalline functionalized copolymers with a low molecular weight non-mesogeic dopant

Hydrogen-bonded blends based on smectic comb-shaped functionalized LC copolymers containing alkyloxy-4-hydroxybenzoic acid fragments (proton donor) and the low molecular weight dopant 4-(4-pyridyloyl)cyanobenzoate (proton acceptor) were obtained. It was observed that blends containing 10–25 mol-% of low molecular weight dopants form a reentrant nematic phase (SmA-RN-SmA-I). The blend behavior in the magnetic field was studied, and the orientational elastic constants of the RN phase were determined.     

A foldamer-based chiroptical molecular switch that displays complete inversion of the helical sense upon anion binding

Chiral indolocarbazole dimers fold into a helical conformation by virtue of intramolecular hydrogen bonds, as demonstrated by (1)H NMR and CD spectra and optical rotations. In particular, the optical properties of the dimers were found to be extremely sensitive to the nature of the solvent, depending on whether they are folded or not. The helical sense of the dimers can be reversibly switched by binding sulfate ion, which gives rise to complete inversion of the CD spectra. The binding mode and absolute stereochemistry of the sulfate complexes was unequivocally determined by single-crystal X-ray structures, which are all consistent with the CD and (1)H NMR spectra in solution.     

Frustrated molecular packing in highly ordered smectic phase of side-chain liquid crystalline polymer with rigid polyacetylene backbone

Using poly(5-{[(4'-heptoxy-4-biphenylyl)carbonyl]oxy}-1-pentyne) as an example, we demonstrate the incorporative accommodation of the rigid polyacetylene backbones and the mesogenic pendants, which leads to a highly ordered smectic (Sm) phase with a frustrated structure. The polymer exhibits a recognizable sheetlike molecular shape due to its rigid backbone and relatively short spacer (three methylene units), and the building block of the liquid crystalline (LC) phase is the whole molecule. In the LC phase, five layers of the molecules stack as a smectic A (SmA) block, and adjacent SmA blocks glide halfway of the molecular width from one to another. In scanning tunneling microscopy (STM) experiments, the STM tip scrape is found to generate a regular nanopattern with periodic electron conductivity, of which the spacing is determined by the side-chain length.     

Phase equilibria and phase separation dynamics in a polymer composite containing a main-chain liquid crystalline polymer

Various topological phase diagrams of blends of main-chain liquid crystalline polymer (MCLCP) and flexible polymer have been established theoretically in the framework of Matsuyama–Kato theory by combining Flory–Huggins (FH) free energy for isotropic mixing, Maier–Saupe (MS) free energy for nematic ordering in the constituent MCLCP, and free energy pertaining to polymer chain-rigidity. As a scouting study, various phase diagrams of binary flexible polymer blends have been solved self-consistently that reveal a combined lower critical solution temperature (LCST) and upper critical solution temperature (UCST), including an hourglass phase diagram. The calculated phase diagrams exhibit liquidus and solidus lines along with a nematic–isotropic (NI) transition of the constituent MCLCP. Depending on the strengths of the FH interaction parameters and the anisotropic (nematic–nematic) interaction parameters, the self-consistent solution reveals an hourglass type phase diagram overlapping with the NI transition of the constituent MCLCP. Subsequently, thermodynamic parameters estimated from the phase diagrams hitherto established have been employed in the numerical computation to elucidate phase separation dynamics and morphology evolution accompanying thermal-quench induced phase separation of the MCLCP/polymer mixture. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3621-3630, 2006     

A chiroptical molecular switch with distinct chiral and photochromic entities and its application in optical switching of a cholesteric liquid crystal

Two new structurally related photoswitches are described, in which azobenzene photochromism is combined with the chirality of a 2,2'-dihydroxy-1,1'-binaphthyl unit. In system 1 the chiral binaphthyl moiety is bridged by a methylene tether, locking the biaryl chirality while in system 2 the biaryl core is unbridged and has considerable conformational flexibility. Both compound are capable of inducing cholesteric liquid crystalline phases and proved to be good photoswitches both in solution and in a liquid crystalline matrix. Compound 2 is capable of completely reversing the liquid crystalline chirality which is unique for a chiroptical molecular switch where the switching unit and the chiral moiety are separate entities.     

A liquid crystalline supramolecular complex of C60 with a cyclotriveratrylene derivative

Cyclotriveratrylene (CTV) derivatives substituted with 9 (1) or 18 (2) long alkyl chains have been prepared. Whereas no liquid crystalline behavior has been observed for 1, the CTV derivative 2 has mesomorphic properties. Indeed, at room temperature compound 2 exhibits a nematic phase characterized by cybotactic groups with a local lamello-columnar order. Both CTV derivatives 1 and 2 are able to form supramolecular complexes with C60 in the solid state. In both cases, the 2:1 host-guest species have been obtained as brown compounds. No liquid crystalline behavior was observed for the supramolecular complex [C60 is included in (1)2]. In contrast, observation of the brown product obtained from C60 and the CTV derivative 2 directly after preparation by polarized optical microscopy revealed a fluid birefringent phase at room temperature. When the sample is heated above 70 degrees C, the birefringence of the texture under the microscope disappears and the X-ray diffraction pattern is transformed into a pattern characteristic of a cubic phase. For the first time in thermotropic liquid crystals, the space group of this cubic phase can be assigned as I4(1)32.     

In situ compatibilizer-reinforced interface between a flexible polymer (a functionalized polypropylene) and a rodlike polymer (a thermotropic liquid crystalline polymer)

We present an investigation of the interfacial reinforcement between a flexible folded-chain polymer (functionalized polypropylene-maleic anhydride-grafted polypropylene, MAPP) and a rodlike polymer (a themotropic liquid crystalline polymer, TCLP - poly(ester amide)). Fracture toughness was measured using an asymmetric double-cantilever beam test (ADCB). High fracture toughness at the bonding temperature of 200 degrees C indicates that a chemical reaction has occurred at the interface to provide a strong interaction between MAPP and TLCP. Despite the higher modulus of TLCP, the fracture was propagated in the TLCP phase because of inherent TLCP domain structure. An analysis on the locus of failure revealed that at constant bonding temperature the fracture toughness between MAPP and TLCP was influenced not only by the bonding temperature but also by the bonding time. The fracture toughness increased with the bonding temperature until 200 degrees C was reached and then decreased at higher bonding temperature. The fracture toughness increased with annealing time until it reached a plateau value. We ascribe the dependence of the fracture toughness on the bonding time to the progressive occurrence of two different failure mechanisms, adhesive failure and cohesive failure. The adhesive strength increased with bonding temperature whereas the cohesive strength decreased because of weaker adhesion between TLCP crystalline domains. The dependence of fracture toughness on bonding time was explained in terms of the TLCP crystalline domain structure.     

Novel liquid crystalline structures of a chiral side chain polymer and its phase transitions

Two novel smectic bilayer structures have been identified in an enantiomerically enriched chiral side chain polymer containing the highly dipolar nitrile group at stereocentres. The structures were characterized by electron diffraction, electron microscopy, and X-ray diffraction. In both phases each smectic layer has a bilayer structure with backbones and spacers confined in a thin disordered region between two sublayers of mesogenic segments. One of the structures which we denote as CrE* has the unusual feature of having its side chains arranged parallel to the layer normal in spite of its enantiomeric bias and twisted nature. In the second structure side chains are tilted by 34.8° with respect to the layer normal and we denote this phase as CrH*_c In both structures each sublayer contains three different orientations of orthorhombic (CrE) or monoclinic (CrH*_c) lattices which are related to one another by rotations of ± 60° about the c-axis. In both the CrH*_c and the CrE* phases, lattices in each sublayer are regularly rotated about the c-axis by 5.9° relative to those in the adjacent sublayer. The observation of a chiral CrH phase is uncommon and in this specific case the structure is unique since the rotation between adjacent layers occurs about the sidechain axis (c-axis) (CrH*_c) and not about the layer normal (c-axis) (CrH*_c). We believe the system undergoes a change in molecular organization from CrH*_c to CrE* as a result of a chemical reaction which joins a fraction of the stereocentres through covalent bonds. With increasing temperature the CrE* structure was found to transform to a special orthorhombic untwisted smectic phase in which a = 31/2b, denoted here as CrE_h. The structure then transforms to a hexatic S_B phase and finally to a S_A phase at yet higher temperatures.     

Investigation of the nematic-isotropic transition of a liquid crystalline polymer and determination of molecular diffusion coefficients using gas chromatography

Inverse gas chromatography has been used to study the nematic-isotropic transition of a side chain liquid crystalline polymer (LCP). The mesogenic side groups are laterally attached to a polysiloxane backbone through a flexible spacer. The nematic-isotropic transition of this LCP coated onto a glass capillary column is detected by considering the variation with temperature of the retention volume and of the theoretical plate number for the several probes. The molecular diffusion coefficients, D, of naphthalene, fluorene, pyrene and o-terphenyl have been determined at different temperatures in the nematic phase of the LCP as well as in the isotropic melt. The values ranged between 10(-14) and 10(-12) m2 s(-1) for the polynuclear aromatic hydrocarbon probes tested.     

Strengthening of liquid crystalline polymer by functionalized carbon nanotubes through interfacial interaction and homogeneous dispersion

Multiwalled carbon nanotubes (MWCNTs) were functionalized with two types of chemical moieties (i.e. carboxylic, ? COOH and hydroxyl benzoic acid groups, ‐HBA) on their sidewalls in order to improve their interaction with a liquid crystalline polymer (LCP) and dispersion in LCP. We have investigated the rheological, mechanical, dynamic mechanical, and thermal properties in detail with variation of HBA‐functionalized MWCNTs in the LCP matrix. Effect of the dispersion state of the functionalized MWCNTs in the LCP matrix on the rheological behavior was also studied. The composites containing HBA‐functionalized MWCNTs showed higher complex viscosity, storage, and loss modulus than the composites with the same loading of raw MWCNTs and MWCNT‐COOH. It was suggested that the HBA‐functionalized MWCNTs exhibited a better dispersion in the polymer matrix and formed stronger CNT‐polymer interaction in the composites than the raw MWCNTs and MWCNT‐COOH, which was also confirmed by FESEM and FTIR studies. As a result, the overall mechanical performance of the HBA‐MWCNT‐LCP composites could be improved significantly. For example, the addition of 4 wt% HBA‐MWCNT to LCP resulted in the considerable improvements in the tensile strength and modulus of LCP (by 66 and 90%, respectively). Copyright © 2010 John Wiley & Sons, Ltd.     

Unique molecular orientation in a smectic liquid crystalline polymer film attained by surface-initiated graft polymerization

Liquid crystalline (LC) polymer brushes containing a mesogenic azobenzene (Az) moiety are synthesized on a quartz or silicon substrate by surface-initiated atom transfer radical polymerization. The molecular orientation of the Az units and the LC properties in the grafted chains are evaluated by UV-vis spectroscopy, polarized optical microscopy, and grazing incidence X-ray diffraction measurements. The Az side chains of the grafted chains exhibited a smectic LC phase in which the smectic layers are oriented perpendicular to the substrate with a parallel orientation of the mesogens. In contrast, a spincast film of the identical LC polymer without grafting to the surface shows layer structures parallel to the substrate. A drastic effect of tethering one end to the substrate on the LC orientation is demonstrated.     

Temperature effect on the rubbing-induced optical phase retardation of a side group liquid crystalline polymer film

Recently we observed an unusual temperature dependence of the pretilt angle of a nematic liquid crystal generated at the rubbed surface of a side group liquid crystalline polymer film. To understand the mechanism, a detailed investigation of the temperature effect on the rubbing-induced optical phase retardation of a side group liquid crystalline polymer film has been carried out. On heating the film above the glass transition temperature of the polymer, a clear change is seen in the temperature dependence of the optical phase retardation. We infer from this investigation that the thermal variation of the rubbing-induced optical phase retardation results in a change in the temperature variation of the pretilt angle.     

近红外电致变色胆甾相液晶高分子的设计、合成及旋光开关性质

通过单体4′-甲氧基苯基-4-烯丙氧基苯甲酸酯(M1)、(S)-(-)-N-(5-己烯基)-6-(4′-(2-甲基丁氧基)苯基)-蒽醌-2,3-二羧酸酰亚胺(M2)与聚甲基氢硅氧烷间的硅氢加成反应,制得了3个新的具有近红外电致变色性质的侧链型液晶共聚物(PC5A10,PC5A20CB,PC5A30CB),并对其液晶性,电化学,光谱电化学和旋光开关性质进行了表征.当M2单体的含量为10mol%,20mol%时,共聚物可形成胆甾相液晶,而当其含量为30mol%时,所能形成的液晶相为近晶A相.3个共聚物的循环伏安曲线均出现了两对可逆的氧化还原峰,分别对应于蒽醌酰亚胺基团得电子而形成自由基阴离子和二价阴离子.中性态时,共聚物在420nm处有较强吸收,而当被还原为自由基阴离子后,在近红外区域840nm出现了新的强烈的吸收.以聚合物为阴极电致变色层,普鲁士蓝为离子储存层的全固态电致变色器件在800nm有较好的光学调制性.此外,本文还就该器件的电化学调控手性光开关性质进行了初步研究.     

Temperature effect on the rubbing-induced optical phase retardation of a side group liquid crystalline polymer film

Recently we observed an unusual temperature dependence of the pretilt angle of a nematic liquid crystal generated at the rubbed surface of a side group liquid crystalline polymer film. To understand the mechanism, a detailed investigation of the temperature effect on the rubbing-induced optical phase retardation of a side group liquid crystalline polymer film has been carried out. On heating the film above the glass transition temperature of the polymer, a clear change is seen in the temperature dependence of the optical phase retardation. We infer from this investigation that the thermal variation of the rubbing-induced optical phase retardation results in a change in the temperature variation of the pretilt angle.