Di and monocarbonyl complexes of rhodium(I) containing singly charged bidentate ligands

Summary A series of neutral square planar rhodium(I) dicarbonyls containing singly charged bidentate ligands (salicylaldoxime, -benzoinoxime, -furildioxime, -benzildioxime, dimethylglyoxime, cupferron) has been prepared from three sources: (i) tetracarbonyl--dichlorodirhodium(I), (ii) solutions of hydrated rhodium chloride in DMF held under reflux and (iii) a carbonylated solution of hydrated rhodium chloride in boiling absolute alcohol. These dicarbonyls react with triphenylphosphine,-arsine and -stibine to yield monocarbonyl derivatives. The monocarbonyls form 1 : 1 adducts with TCNE. All complexes have been characterized by elemental analysis, i.r. and uv-visible spectra.     

Rhodium(I) phosphine complexes containing bidentate unsaturated thio ligands: I. Synthesis and characterisation

The rhodium(I) complexes (Ph₃P)₂Rh(LL′), in which LL′ is an unsaturated chelate coordinating via L = S and L′ = N, O, P or S, have been prepared from RhCl(PPh₃)₃ by two routes.Direct substitution of one Ph₃P and Cl^? by the chelate anion gives (Ph₃P)₂Rh[Ph₂PC(S)S] (L = S, L′ = P). Oxidative addition of an NH bond followed by reductive elimination of HCl results in (Ph₃P)₂Rh[Me₂NC(S)NC(S)NMe₂] (L = S, L′ = S), (Ph₃P)₂Rh[PhNC(S)NMe₂] (L = S, L′ = N), (Ph₃P)₂Rh[Ph₂PC(S)NPh) (L = S, L′ = P) and (Ph₃P)₂Rh[Ph₂P(O)C(S)NPh] (L = S, L′ = O).Reaction of the complexes (Ph₃P)₂Rh(LL′) with CO gives (CO)(Ph₃P)Rh(LL′) with CO trans to the chelate donor atom with the lowest trans-influence. Pt(PPh₃)₄ reacts with Me₂NC(S)N(H)C(S)NMe₂ and HN(Ph)C(S)PPh₂, respectively, to give H(Ph₃P)Pt[Me₂NC(S)NC(S)NMe₂] (L = S, L′ = S) and H(Ph₃P)Pt[Ph₂PC(S)NPh] (L = S, L′ = P).The coordinating atoms and their configurations have been assigned by IR ³¹P NMR and ¹H NMR. Some trend in IR and ³¹P NMR paramaters are discussed.     

Preparation and properties of palladium(II) and rhodium(I) complexes containing bidentate phosphine sulphide and selenide ligands

Summary The synthesis and properties of cationic complexes of general formula [ML₂{CH₂(Ph₂PE)₂}]BF₄, where M = Pd^II and Rh^II, L₂ = ³-MeC₃H₄, {P(O)(OR)₂}₂H (R = Me, Et), COD, (CO)₂, (CO)PPh₃ and E = S, Se are described. The methylene proton of the coordinated phosphine sulphide or selenide ligands react with strong bases as BuLi in n-hexane or NaH in THF, to give neutral complexes of the type [ML₂{CH(Ph₂PE)₂}], where M = Pd^II, Rh^I; L₂ = ³-MeC₃H₄, COD and E = S, Se. The complexes have been characterized by elemental analyses, molar conductivities, i.r., ¹H n.m.r. and ³¹P{¹H} n.m.r. spectroscopy.     

Synthesis,characterization and luminescent properties of copper(I) halide complexes containing biphenyl bidentate phosphine ligand

Copper(I) halide complexes having thermally activated delayed fluorescence (TADF) and phosphorescence have attracted much attention. Here, a series of four-coordinate dinuclear copper(I) halide complexes, [CuX(bpbp)]₂ (bpbp = 2,2′-bis(diphenylphosphino)biphenyl, X = I (1), Br (2) and Cl (3)), were synthesized, and their molecular structures and photophysical properties were investigated. The structural analysis reveals that two copper(I) centers are bridged by two halogen ligands to form a dinuclear structure with a four-membered Cu₂X₂ ring. These complexes exhibit yellow to blue emission in the solid state at room temperature and have peak emission wavelengths at 575–487 nm with microsecond lifetimes (τ = 6.2–19.8 μs) and low emission quantum yields (<0.01%). The emissions of 1–3 originate from MLCT, XLCT, and IL (intraligand) transitions. Three complexes displayed good thermal stability.     

Ruthenium(II) complexes containing bidentate Schiff bases and triphenylphosphine or triphenylarsine

Reactions of ruthenium(II) complexes [RuHX(CO)(EPh₃)₂(B)] (X = H or Cl; B = EPh₃, pyridine (py) or piperidine (pip); E = P or As) with bidentate Schiff base ligands derived by condensingo- hydroxyacetophenone with aniline,o- orp-methylaniline have been carried out. The products were characterized by analytical, IR, electronic and¹H-NMR spectral studies and are formulated as [Ru(X)(CO) (L)(EPh₃)(B)] (L = Schiff base anion; X = H or Cl; B = EPh₃, py or pip; E = P or As). An octahedral structure has been tentatively proposed for the new complexes. The new complexes were tested for their catalytic activities in the oxidation of benzyl alcohol to benzaldehyde.     

Ruthenium(II) complexes containing bidentate Schiff bases and their antifungal activity

The reactions of ruthenium(II) complexes, [RuHCl(CO)(PPh₃)₂(B)] [B = PPh₃, pyridine (py) or piperidine (pip)], with bidentate Schiff base ligands derived by condensing salicylaldehyde with aniline, o-, m- or p-toluidine have been carried out. The products were characterised by analytical, i.r., electronic, ¹H-n.m.r. and ³¹P-n.m.r. spectral studies and are formulated as [RuCl(CO)(L)(PPh₃)(B)] (L = Schiff base anion; B = PPh₃, py or pip). An octahedral structure has been tentatively proposed for the new complexes. The Schiff bases and the new complexes were tested in vitro to evaluate their activity against the fungus Aspergillus flavus.     

Thermal behavior of copper(II) pseudohalide complexes containing bidentate amines

Pseudohalide complexes of copper(II) with aliphatic bidentate amines, [Cu(N₃)₂(N,N-diEten)]₂ 1, [Cu(NCO)₂(N,N-diEten)]₂ 2, [Cu(NCO)₂(N,N-diMeen)]₂ 3, [Cu(N₃)(NCS)(N,N'-diMeen)]₂ 4 and [Cu(N₃)(NCO)(N,N-diMeen)]₂ 5 (N,N-diEten=N,N-diethylethylenediamine; N,N-diMeen=N,N- dimethyl-ethylenediamine and N,N'-diMeen = N,N'-dimethylethylenediamine), were prepared, characterized and their thermal behavior was investigated by TG curves. According to thermal analysis and X-ray diffraction patterns all compounds decomposed giving copper(II) oxide as final product. The mechanisms of decomposition were proposed and an order of thermal stability was established.This revised version was published online in November 2005 with corrections to the Cover Date.     

Synthesis,spectral characterization,properties and structures of copper(I) complexes containing novel bidentate iminopyridine ligands

Four new ligands, (4-methyl-phenyl)-pyridin-2-ylmethylene-amine (A), (2,3-dimethyl-phenyl)-pyridin-2-ylmethylene-amine (B), (2,4-dimethyl-phenyl)-pyridin-2-ylmethylene-amine (C) and (2,5-dimethyl-phenyl)-pyridin-2-ylmethylene-amine (D), and their corresponding copper(I) complexes, [Cu(A)₂]ClO₄ (1a), [Cu(B)₂]ClO₄ (1b), [Cu(C)₂]ClO₄ (1c), [Cu(D)₂]ClO₄ (1d), [Cu(A)(PPh₃)₂]ClO₄ (2a), [Cu(B)(PPh₃)₂]ClO₄ (2b), [Cu(C)(PPh₃)₂]ClO₄ (2c) and [Cu(D)(PPh₃)₂]ClO₄ (2d), have been synthesized and characterized by CHN analyses, ¹H and ¹³C NMR, IR and UV–Vis spectroscopy. The crystal structures of [Cu(B)₂]ClO₄ (1b), [Cu(C)₂]ClO₄ (1c) and [Cu(A)(PPh₃)₂]ClO₄ · 1/2CH₃CN (2a) were determined from single crystal X-ray diffraction. The coordination polyhedron about the copper(I) center in the three complexes is best described as a distorted tetrahedron. A quasireversible redox behavior is observed for the complexes.     

The formation of cobalt(II) halide complexes containing neutral bidentate ligands

Summary Preparation of cobalt(II) halide complexes with neutral bidentate ligands, including 2-pyridyl alkyl ketones, is reported. 2-Pyridyl alkyl ketones act as monodentate or bidentate ligands depending on the reaction solvent used. Tetrahedral complexes are isolated for all potential -donating neutral ligands.trans-Octahedral complexes are formed only if the neutral ligands are strong -donors and -acceptors. The stereochemistry of cobalt(II) halide complexes is discussed in relation to the nature of the neutral ligands.     

Rhodium(I) complexes bound to silica via bidentate phosphine ligands

Triethoxysilyl substituted diphosphines of the novel type (EtO)₃Si(CH₂)_nP(Ph)CH₂CH₂PPh₂ (n=1, 3) have been prepared and used to immobilize rhodium(I) complexes to silica. The complexes were found to be effective catalysts for hydrogenation of 1,3-cyclooctadiene under mild conditions.

---

- (EtO)₃Si(CH₂)_nP(Ph)CH₂CH₂PPh₂ (n=1,3) SiO₂. 1,3- .

     

Zirconium and hafnium complexes containing bidentate diarylamido-phosphine ligands

The first examples of mononuclear, structurally characterized triarylphosphine complexes of zirconium and hafnium are reported. The metathetical reactions of MCl4(THF)2 (M = Zr, Hf) with [iPrNP]Li(THF)2 ([iPrNP]- = N-(2-(diphenylphosphino)phenyl)-2,6-diisopropylanilide) or [MeNP]Li(THF)2 ([MeNP]- = N-(2-(diphenylphosphino)phenyl)-2,6-dimethylanilide) in toluene at -35 degrees C produced the corresponding [iPrNP]MCl3(THF) and [MeNP]2MCl2, respectively, in high yield. In contrast, attempts to prepare [MeNP]MCl3(THF) and [iPrNP]2MCl2 led to the concomitant formation of mono- and bis-ligated complexes, from which purification proved rather ineffective. The solution and solid-state structures of [iPrNP]MCl3(THF) and [MeNP]2MCl2 were studied by multinuclear NMR spectroscopy and X-ray crystallography. The geometry of these six-coordinate complexes is best described as a distorted octahedron in which the chloride ligands in [iPrNP]MCl3(THF) adopt a virtually meridional coordination mode whereas those in [MeNP]2MCl2 are trans to each other.     

Rhodium(I) phosphine complexes containing bidentate unsaturated thio ligands: II. Reactions with O2 and H2

The rhodium(I) complexes (Ph₃P)₂Rh[Me₂NC(S)NC(S)NMe₂], (Ph₃P)₂Rh[SC(S)NMe₂] and (Ph₃P)₂Rh[PhNC(S)NMe₂] react with O₂ to give 1/1 dioxygen adducts. In solution, trans-(Ph₃P)₂Rh(O₂)[Me₂NC(S)NC(S)NMe₂], cis- and trans-(Ph₃P)₂Rh(O₂)[SC(S)NMe₂] and cis- and trans-(Ph₃P)₂Rh(O₂)[PhNC(S)NMe₂] are observed. For (Ph₃P)₂Rh(O₂)[PhNC(S)NMe₂], there is a solvent effect on the initial cis—trans ratio and the rate of O=PPh₃ formation. In C₆H₆, O=PPh₃ formation from (Ph₃P)₂Rh(O₂)[PhNC(S)NMe₂] is inhibited by additional PPh₃.The reaction of (Ph₃P)₂Rh[Ph₂PC(S)NPh] with O₂ in the presence of additional PPh₃ gives O=PPh₃ and cis-(Ph₃P)₂Rh(O₂)[Ph₂P(O)C(S)NPh] as the only products. The same complex also can be prepared from (Ph₃P)₂Rh[Ph₂P(O)C(S)NPh] and O₂.Only (Ph₃P)₂Rh[PhNC(S)NMe₂] reacts with H₂ at room temperature to give (Ph₃P)₂RhH₂[PhNC(S)NMe₂], which is a catalyst for cyclohexene hydrogenation.     

Synthesis of cationic carbonyl complexes of manganese(I) with bidentate ligands

Summary Bidentate ligands can readily replace acetone in thefac-[Mn(CO)₃(chel)(OCMe₂)]⁺ complexes or the perchlorate group fromfac-[Mn(CO)₃(chel)(OClO₃)] yieldingfac-[Mn(CO)₃(chel)(L-L)]⁺ or [{fac-Mn(CO)₃(chel)}₂(L-L)]²⁺ [chel = 1,10-phenanthroline (phen), 2,2-bipyridine (bipy), 1,2-bis(diphenylphosphine)ethane (dpe); L-L = bis(diphenylphosphine)methane (dpm), dpe, 1,4-bis(diphenylphosphine)butane (dpb), succinonitrile (suc), and glutaronitrile (glu)]. Some of these mononuclear complexes are precursors for binuclear complexes which are linked by bridging phosphines or nitriles.     

Polystyrene anchored rhodium (I) bidentate ligand complexes as catalysts for hydrogenation

Polystyrene supported Rh(I) AA′ (AA′ = anthranilic acid, 2,2′-bipyridine or 1,10-phenanthroline) complexes catalyse the hydrogenation of monoolefins (terminal, cyclic and internal) and dienes. Ethyl sorbate undergoes saturation via the monoene intermediate. Thiscis olefin reacts faster than thetrans isomer. The rate law for the reaction is: Rate α [catalyst] [substrate] [H₂].     

Ruthenium carbene complexes containing bidentate and tridentate PO ligands

Treatment of [Ru(CHR)Cl₂(PCy₃)₂] (Cy = cyclohexyl) with Tl[N(Pr₂ⁱPO)₂] and AgL_OEt (L_OEt⁻ = [CpCo{P(O)(OEt)₂}₃]⁻) afforded the Ru carbene complexes [Ru(CHPh)(PCy₃)Cl{N(Pr₂ⁱPO)₂}] (1) and [L_OEtRu(CHR)(PCy₃)Cl] (2), respectively. Chloride abstraction of complex 2 with TlPF₆ in MeCN afforded [L_OEtRu(CHPh)(PCy₃)(MeCN)][PF₆] (3). Complexes 1 and 2 are capable of catalyzing ring-closing metathesis of diethyl 1,2-diallylmalonate. The crystal structure of complex 2 has been determined.     

Novel zirconium complexes containing a bidentate phenoxybenzotriazole ligand

Treatment of CpZrCl₃ with 1 equiv of 2-(2H-benzo[d][1,2,3]triazol-2-yl)-4,6-di-tert-pentylphenol (LigH) in THF or toluene affords the monomeric complex C₃₁H₄₁Cl₂N₃O₂Zr (1) or the dimeric complex C₅₄H₆₆Cl₄N₆O₂Zr₂ (2), respectively. THF can transform the dimeric 2 into monomeric 1 within a few minutes at room temperature. The reaction between LigH and 2 equiv of CpZrCl₃ gave the novel dinuclear complex C₃₂H₃₈Cl₅N₃OZr₂ (3), linked by three bridging chlorides. The monomeric complex C₄₄H₅₆Cl₂N₆O₂Zr (4), containing two Lig and two Cl ligands, could be obtained by the reaction between 2 equiv of LigH and Zr(NMe₂)₄ in toluene and subsequent addition of Me₃SiCl. The molecular structures of the complexes were determined by the single crystal X-ray crystallographic method. In the presence of methylalumoxane (MAO) as a cocatalyst, the four complexes synthesized were highly active for the polymerization of ethylene.     

Cyclooctenyl complexes of palladium(II) with multidentate N-heterocycles

[Pd(cod)(cotl)]ClO₄ (cod = 1,5-cyclooctadiene, cotl = cyclooctenyl, C₈H₁₃ ^–) undergoes substitutions with multidentate N-heterocycles: 1,3-bis(benzimidazolyl)benzene (L¹), 1,3-bis(1-methylbenzimidazol-2-yl)benzene (L²), 2,6-bis(benzimidazolyl)pyridine (L³) and 2,6-bis(1-methylbenzimidazol-2-yl)pyridine (L⁴) to yield mono/binuclear complexes: [Pd(cotl)(L¹)(OClO₃)], [Pd(cotl)(L)]ClO₄ (L = L² or L³) and [Pd(cotl)₂(L⁴)](ClO₄)₂. Dihalobridged binuclear complexes [PdX(cotl)]₂ (X = Cl or Br) undergo halogen bridge cleavages with the multidentate N-heterocycles to form binuclear complexes of the type [PdX(cotl)₂L] (X = Cl or Br; L = L¹, L², L³ or L⁴). The complexes were characterized by elemental analyses, ¹H-, ¹³C-n.m.r., i.r., far-i.r. and FAB-mass spectral studies.     

Thorium(IV) complexes of bidentate hydroxypyridinonates

The coordination chemistry of actinide(IV) ions with hydroxypyridinone ligands has been initially explored by examining the complexation of Th(IV) ion with bidentate PR-1,2-HOPO (HL(1)()), PR-Me-3,2-HOPO (HL(2)()), and PR-3,4-HOPO-N (HL(3)()) ligands. The complexes Th(L(1)())(4), Th(L(2)())(4), and Th(L(3)())(4) were prepared in methanol solution from Th(acac)(4) and the corresponding ligand. Single-crystal X-ray diffraction analyses are reported for the free ligand PR-Me-3,2-HOPO (HL(2)()) [Ponemacr;, Z = 8, a = 8.1492(7) A, b = 11.1260(9) A, c = 23.402(2) A, alpha = 87.569(1) degrees, beta = 86.592(1) degrees, gamma = 87.480(1) degrees ], and the complex Th(L(2)())(4).H(2)O [Pna2(1) (No. 33), Z = 4, a = 17.1250(5) A, b = 12.3036(7) A, c = 23.880 (1) A]. A comparison of the structure of the metal complex Th-PR-Me-3,2-HOPO with that of free ligand PR-Me-3,2-HOPO reveals that the ligand geometry is the same in the free ligand and in the metal complex. Amide hydrogen bonds enhance the rigidity and stability of the complex and demonstrate that the Me-3,2-HOPO ligands are predisposed for metal chelation. Solution thermodynamic studies determined overall formation constants (log beta(140)) for Th(L(1)())(4), Th(L(2)())(4), and Th(L(3)())(4) of 36.0(3), 38.3(3), and 41.8(5), respectively. Species distribution calculations show that the 4:1 metal complex Th(L)(4) is the dominant species in the acidic range (pH < 6) for PR-1,2-HOPO, in weakly acidic to physiological pH range for PR-Me-3,2-HOPO and in the high-pH range (>8) for PR-3,4-HOPO-N. This finding parallels the relative acidity of these structurally related ligands. In the crystal of [Th(L(2)())(4)].H(2)O, the chiral complex forms an unusual linear coordination polymer composed of linked, alternating enantiomers.