An experimental study on the “sequential order” rules in generalized two-dimensional correlation spectroscopy

Following our theoretical analysis on the “sequential order” rules in generalized two-dimensional (2D) correlation spectroscopy (H. Huang, Anal. Chem. 79 (2007) 8281–8292), an experimental study was conducted to test the “sequential order” rules using the FT-NIR data of poly(3-hydroxybutyrate) (PHB)/poly(l-lactic acid) (PLA) blends under uniaxial elongation and parallel polarization. The local sequential order concept proposed for the generalized two-dimensional (2D) correlation spectroscopy is now more clearly stated; “the intensity change at ν1 occurs predominantly before ν2” means that the starting time of the intensity change at ν1 is prior to that at ν2. It is this local sequential order which reflects the real and intuitive sequential order between two events in generalized situations. It has been found that the integrated/overall sequential order results obtained from the 2D correlation analysis may be contradictory to the intuitive local sequential order. In addition, different integrated/overall sequential orders could be obtained by selection of different sampling intervals from a certain set of experimental data, or choosing different number of the contours for the same sampling interval. These new experimental findings are a perfect reinforcement to our previous theoretical study and have further demonstrated the uncertainty of applying the “sequential order” rules in generalized 2D correlation spectroscopy.     

Effects of strong inter-hydrogen bond dynamical couplings in the polarized IR spectra of adipic acid crystals

This paper presents the results of the re-investigation of polarized IR spectra of adipic acid and of its d₂, d₈ and d₁₀ deuterium derivative crystals. The spectra were measured at 77 K by a transmission method using polarized light for two different crystalline faces. Theoretical analysis concerned linear dichroic effects and H/D isotopic effects observed in the spectra of the hydrogen and deuterium bonds in adipic acid crystals at the frequency ranges of the ν_O–H and the ν_O–D bands. The two-branch fine structure pattern of the ν_O–H and ν_O–D bands and the basic linear dichroic effects characterizing them were ascribed to the vibronic mechanism of vibrational dipole selection rule breaking for IR transitions in centrosymmetric hydrogen bond dimers. It was proved that for isotopically diluted crystalline samples of adipic acid, a non-random distribution of protons and deuterons occurs in the dimers (H/D isotopic “self-organization” effect). This effect results from the dynamical co-operative interactions involving the dimeric hydrogen bonds.     

Adsorption of <Emphasis Type="Italic">n</Emphasis>-Butanol from Aqueous Solutions on an Sn-Ga Electrode in the Absence of a Metal-Water Chemisorption Interaction

Data on the dependence of the differential capacitance on potential at the Sn-Ga/H₂O interface in 0.05 M solutions of Na₂SO₄ with various additives of n-butanol are obtained by a bridge method at a frequency of 420 Hz and a temperature of 32°C. In the region of potentials studied, the chemisorption interaction (Sn-Ga)-H₂O is completely absent. The adsorption parameters of n-butanol are obtained by a method of a regression analysis of these data. The data obtained are compared with similar data on various hydrophobic electrodes. Shown is that, on the Sn-Ga and Pb-Ga electrodes, whose “electronic” capacitance is similar, the free energies of adsorption of n-butanol are also similar but differ from the adsorption energy on electrodes of Hg, Bi-Ga, and Tl-Ga. The results that are obtained on an Sn-Ga electrode nicely fit a general correlation dependence between the reciprocal value of the electronic capacitance of various electrodes in the absence of a metal-water chemisorption interaction, (C _m ⁻¹ ), and the free energies of adsorption of molecules of n-butanol on these, ΔG _A ⁰ . The dependence of the free energies of adsorption of molecules of n-butanol in the absence of a metal-water chemisorption interaction on the magnitude of the electronic capacitance of the metal confirms the assumption that we had put forth previously that it is necessary to introduce corrections to criteria of hydrophilicity of metals based on a comparison of quantities ΔG _A ⁰ and potentials of cathodic peak of adsorption-desorption E _des, which are expressed in a rational scale. With the obtained correlation relationships taken into account, criteria of hydrophilicity are suggested, which take into account these correlation relationships.__________Translated from Elektrokhimiya, Vol. 41, No. 7, 2005, pp. 884–892.Original Russian Text Copyright © 2005 by Emets, Damaskin.     

Proteolytic activity in various water-in-oil microemulsions as related to the polarity of the reaction medium

The catalytic behaviors of α-chymotrypsin and of trypsin were studied in anionic AOT-isooctane-water and cationic CTAB-ROH-isooctane-water microemulsion systems. The effects of various parameters, such as the pH and the water content expressed in terms of the molar ratio w_o = [H₂O]/[Surfactant], on the enzyme activity, were examined. The kinetic constants were calculated and it was found that in the case of trypsin the enzyme exhibited a remarkable “superactivityrd, when studied in the CTAB microemulsion systems. The effect of the alcohol cosurfactant used in these cationic systems was investigated in relation to the polarity of the reaction medium. By using the hydrophilic probe 1-methyl-8-oxyquinolinium betaine the micropolarity of the water core was determined and related to the kinetic results.     

Synthesis of new 1<Emphasis Type="Italic">H</Emphasis>-pyridazine derivatives <Emphasis Type="Italic">peri</Emphasis>-annelated with acenaphthene and acenaphthylene

The reaction of 6-acetyl-5-hydroxyacenaphthene with methylhydrazine afforded 1,3-dimethyl-1H-6,7-dihydroacenaphtho[5,6-de]pyridazine. Its dehydrogenation with chloranil gave 1,3-dimethyl-1H-acenaphtho[5,6-de]pyridazine, which is a heteroaromatic compound with an essentially new topology of the ρsystem. The reaction of 3-methyl-1H-6,7-dihydroacenaphtho[5,6-de]pyridazine with 3,5-di-tert-butyl-1,2-benzoquinone yielded a dimer containing the acenaphthene and acenaphthylene moieties of peri-annelated 1H-1,2-diazines connected in positions 1′ and 9.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 777–780, March, 2005.     

Kinetics of the exothermic decomposition of 1-nitro-3-(β,β,β-trinitroethyl)-4,5-dinitroiminoimidazolidine-2-one

The kinetic parameters of the exothermic decomposition of the title compound in a temperatureprogrammed mode have been studied by means of DSC. The DSC data obtained are fitted to the integral, differential, and exothermic rate equations by the linear least-squares, iterative, combined dichotomous, and least-squares methods, respectively. After establishing the most probable general expression of differential and integral mechanism functions by the logical choice method, the corresponding values of the apparent activation energy (E _a), preexponential factor (A), and reaction order (n) are obtained by the exothermic rate equation. The results show that the empirical kinetic model function in differential form and the values of E _a and A of this reaction are (1 − α)^−4.08, 149.95 kJ mol⁻¹, and 10^14.06 s⁻¹, respectively. With the help of the heating rate and kinetic parameters obtained, the kinetic equation of the exothermic decomposition of the title compound is proposed. The critical temperature of thermal explosion of the compound is 155.71°C. The above-mentioned kinetic parameters are quite useful for analyzing and evaluating the stability and thermal explosion rule of the title compound. The text was submitted by the authors in English.     

Computer simulation of the steady state currents at enzyme doped carbon paste electrodes

The plate-gap model of porous enzyme doped electrode has been proposed and analyzed. It was suggested that reaction diffusion conditions in pores of bulk electrode resemble particular conditions in thin gap between parallel conducting plates. The model is based on the diffusion equations containing a nonlinear term related to the Michaelis–Menten kinetic of the enzymatic reaction inside gap. Steady state current was calculated for the wide range of given parameters and substrate concentrations. All dependences of current on substrate concentration were approximated by hyperbolas in order to obtain “apparent” parameters (maximal currents and apparent Michaelis constants) of modelled biosensors. Simple approximate relationships between given and apparent parameters were derived. The applicability of theoretical plate-gap model was tested for the case of carbon paste electrodes which were doped with PQQ – dependent glucose dehydrogenase. It was found, that soluble glucose dehydrogenase based biosensors exhibit characteristic features of the theoretical plate-gap biosensors.     

Simulation approach to decomposition kinetics and thermal hazards of hexamethylenetetramine

The thermal stability of HMT under dynamic, isothermal and adiabatic conditions was investigated using differential scanning calorimeter (DSC) and accelerating rate calorimeter (ARC), respectively. It is found from the dynamic DSC results that the exothermic decomposition reaction appears immediately after endothermic peak, a coupling phenomenon of heat absorption and generation, and the endothermic peak and exothermic peak were indentified at about 277–289 and 279–296 °C (T_peak) with the heating rates 1, 2, 4 and 8 °C min⁻¹. The ARC results reveal that the initial decomposition temperature of HMT is about 236.55 °C, and the total gas production in decomposition process is 6.9 mol kg⁻¹. Based on the isothermal DSC and ARC data, some kinetic parameters have been determined using thermal safety software. The simulation results show that the exothermic decomposition process of HMT can be expressed by an autocatalytic reaction mechanism. There is also a good agreement between the kinetic model and kinetic parameters simulated based on the isothermal DSC and ARC data. Thermal hazards of HMT can be evaluated by carrying out thermal explosion simulations, which were based on kinetic models (Isothermal DSC and ARC) to predict several thermal hazard indicators, such as T_D24, T_D8, TCL, SADT, ET and CT so that we can optimize the conditions of transportation and storage for chemical, also minimizing industrial disasters.

     

Adsorption characteristics of metal-EDTA complexes onto hydrous oxides

The adsorption characteristics of a variety of metal-EDTA complexes onto hydrous oxides, principally aluminum oxide (γ-Al₂O₃), were examined in aqueous solution. Adsorption of these complexes increased with increasing proton concentration due to the formation of surface complexes between EDTA and the surface hydroxo groups, specifically the AlOH₂⁺ surface groups. The pH-dependent adsorptive behavior and the magnitude of adsorption of the “free” EDTA species were similar to those of the metal complexes. The results also showed that the adsorption of “free” EDTA was exothermic, while the adsorption of Ni(II)-EDTA complexes was endothermic in the lower pH region (3.5) and exothermic at higher pH values (6.0). This implied that the surface preferred the NiHEDTA⁻¹ species rather than the NiEDTA⁻² species. Specific adsorption of the metal complexes was evidenced by the charge reversal exhibited by the γ-Al₂O₃ particles at the highest surface loadings. A quantitative model was formulated based on the pH-dependent speciation of the oxide surface, speciation of the metal complexes in solution, and ζ potential measurements. This model proved valid over a wide range of pH (3–10) and for both high (>50% coverage) and low (<10% coverage) surface loadings.     

Annealing effects on the solid state properties of transition-metal coordination complexes and networks based on diene polymers with palladium chloride

This study focuses on the thermal and mechanical properties of 1,2-polybutadiene and 3,4-polyisoprene with an inorganic salt, bis(acetonitrile)dichloropalladium (II). Upon mixing in THF, effective crosslinks are formed because the acetonitrile ligands of the palladium salt are displaced by olefinic pendant groups of the polymers. Using a simple nth-order irreversible kinetic rate model, the palladium-catalyzed Heck-like exothermic reaction in solid films was characterized via isothermal and nonisothermal DSC. Thermal energy and mass balances appropriate to a batch reactor are developed from first principles and applied to the isothermal DSC output curve to calculate the time dependence of reactant conversion. Relevant kinetic parameters, such as the order of the reaction, the characteristic time constant for the chemical reaction, and the activation energy, have been determined. The kinetic data suggest that the palladium-catalyzed crosslinking reactions are diffusion controlled in the solid state because the reaction order is very close to unity. Higher glass transition temperatures (T_g) are measured by dynamic mechanical thermal analysis (DMTA) and differential scanning calorimetry (DSC) when (i) palladium concentration, (ii) annealing (heat treatment) time, and (iii) annealing temperature increase. After 2 h of annealing at 80°C, which corresponds to a temperature below the first exothermic crosslinking reaction (≅ 115°C) during nonisothermal DSC kinetic studies, rubbery materials containing very low concentrations of PdCl₂ (i.e., 0.5 mol %) exhibit reinforced ductile stress-strain response. When annealing is performed at the peak temperature of the first exothermic event, the rubbery materials are transformed into glasses. Transition-metal compatibilization of atactic 1,2-polybutadiene and 3,4-polyisoprene via PdCl₂ is demonstrated by monitoring the glass transition obtained from dynamic mechanical tan δ profiles. The effect of annealing this ternary reactive “blend” produces a glassy material exhibiting an elevated T_g and synergistic mechanical properties. © 1996 John Wiley & Sons, Inc.     

A study of the growth and CO electrooxidation behaviour of PtRh alloys on Pt{1 0 0} single crystals

The formation of quasi-crystalline PtRh two dimensional films supported on Pt{1 0 0} is described. For the first time, the voltammetry of PtRh{1 0 0} single crystal alloys covering the whole range of alloy composition is reported. Synthesis follows a similar procedure to that described previously for the formation of PtPd alloys supported on Pt{h k l} but with some important provisos concerning the final annealing step. CO electrooxidation was used as a probe reaction and for certain PtRh{1 0 0} surface alloys, unusually high electrocatalytic activity was observed relative to monometallic Pt and Rh electrodes. The flame annealing of a “PtRhPt sandwich” precursor structure was found to be the best method of forming the PtRh alloy surfaces. For PtRh films annealed under nitrogen, significant phase separation was observed in agreement with previous surface science studies of PtRh adlayers on Pt{1 0 0} annealed in the absence of oxygen. In addition, an excess of Rh in the “sandwich structure” from which the alloy was formed tended to preclude good alloy formation. It is suggested that the protocols for thin film formation described may prove useful in many other important electrocatalytic systems.     

Kinetics of Oxidation of “Capped” Zinc Porphyrin Containing a 2,5-Dimethoxyphenylene “Cap” with Organic Peroxides in the Presence of Imidazole

Oxidation of the zinc complex of “capped” 5,15-[2,5-bis(2′-phenyleneoxymethyl)-1,4-dimethoxybenzene]-2,8,12,18-tetramethyl-3,7,13,17-tetrabutylporphyrin with organic peroxides in the presence of imidazole at 298 K results in complete breakdown of the complex. The nitrogen base exerts a significant effect on the rate of metal porphyrin oxidation. The kinetic parameters of the reaction were determined. The structures of the sterically strained metal porphyrin and intermediate products of its oxidation were optimized by PM3 calculations. A geometry analysis shows that the deformations of the macroring increase upon formation of the extra complex and its reaction with peroxides.__________Translated from Zhurnal Obshchei Khimii, Vol. 75, No. 5, 2005, pp. 847–853.Original Russian Text Copyright © 2005 by Zaitseva, Zdanovich, Koifman.     

Equilibrium, kinetics and thermodynamic aspects of Promethazine hydrochloride sorption by iron rich smectite

Equilibrium, kinetics and thermodynamic aspects of sorption of Promethazine hydrochloride (PHCl) onto iron rich smectite (IRS) from aqueous solution were investigated. The effect of pH on sorption of PHCl onto IRS was also found out. Experimental data were evaluated by using Langmuir, Freundlich and Dubinin–Raduschkevich (DR) isotherm equations. Freundlich and DR equations provided better compatibility than Langmuir equation. Besides, it was determined that the maximum sorption of PHCl takes place at about pH 5. From kinetic studies, it was obtained that sorption kinetics follow pseudo-second-order kinetic model for PHCl sorption onto IRS. When thermodynamic studies are concerned, the values of activation energy (E_a), ΔG°, ΔH° and ΔS° were obtained. ΔG° values are in the range of −8.84 and −9.45 kJ mol⁻¹ indicating spontaneous nature of physisorption. The negative value of the ΔH° (−3.20 kJ mol⁻¹) indicates exothermic nature of adsorption. FTIR analysis and SEM observations of IRS and PHCl adsorbed IRS were also carried out. Sorption experiments indicate that IRS may be used effectively for the adsorption of PHCl.     

Effect of the structure of complex-forming additives on radical exchange between phenyllithium and bromobenzene

Analysis of kinetic data of the effect of alkali-metal and tetramethylammonium halides on radical exchange between phenyllithium and bromobenzene allows estimation of their induction and steric constants. The additive character of the effect on kinetic and activation parameters of the exchange reaction was established. An equation that describes well the relation between the reaction parameters and the structure constants of metal halides and ethers was derived.Translated fromIzvestiya Akademii Nauk. Seriya Khimlcheskaya, No. 2, pp. 246–249, February, 1994.     

Isotherm, kinetic and thermodynamic studies of lead and copper uptake by H2SO4 modified chitosan

The kinetic and thermodynamic adsorption and adsorption isotherms of Pb(II) and Cu(II) ions onto H₂SO₄ modified chitosan were studied in a batch adsorption system. The experimental results were fitted using Freundlich, Langmuir and Dubinin–Radushkevich isotherms; the Langmuir isotherm showed the best conformity to the equilibrium data. The pseudo-first order, pseudo-second order and intraparticle diffusion kinetic models were employed to analyze the kinetic data. The adsorption behavior of Pb(II) and Cu(II) was best described by the pseudo-second order model. Thermodynamic parameters such as free energy change (ΔG°), enthalpy change (ΔH°) and entropy change (ΔS°) were determined; the adsorption process was found to be both spontaneous and exothermic. No physical damage to the adsorbents was observed after three cycles of adsorption/desorption using EDTA and HCl as eluents. The mechanistic pathway of the Pb(II) and Cu(II) uptake was examined by means of Fourier transform infrared (FTIR) and Energy dispersive X-ray (EDX) spectroscopy. The equilibrium parameter (R_L) indicated that chitosan–H₂SO₄ was favorable for Pb(II) and Cu(II) adsorption.     

A Novel Method to Determine DNA by Use of Molecular “Light Switch” of Ru(phen)2(dppz)

A novel fluorimetric method was developed for selective determination of DNA with the molecular “light switch” complex of Ru(phen)₂(dppz)²⁺. The maximum fluorescence intensity was produced in the pH range 9.3–11.5, with the maximum excitation and emission wavelength of 453.0 and 598.0 nm, respectively. Under the optimum conditions, the fluorescence intensity was in proportion to the concentration of DNA. The linear range for calfthymus DNA, salmon sperm DNA, and herring sperm DNA are 0–0.9 μg/mL. The limits of detection for calfthymus DNA, salmon sperm DNA, and herring sperm DNA are 2.0, 1.8, and 5.4 ng/mL, separately. When the proposed method was used to determine DNA in the presence of some coexisting substances, a satisfactory result was obtained.     

The persistent radical effect in controlled radical polymerizations

We describe the basic kinetic features of “living” polymerizations controlled and regulated by persistent radicals or related species and by reversible atom transfer. In these systems a special kinetic phenomenon operates—the Persistent Radical Effect. It is also known from selective organic syntheses and reflects a self-inhibition of the termination reaction. Analytical equations for the polymerization rates and for the polydispersities of the resulting polymers are presented, and important requirements for reaction rate constants leading to control are outlined. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1885–1901, 1999     

Esterification reaction kinetics of acetic acid and n-pentanol catalyzed by sulfated zirconia

This study reports experimental data and kinetic modeling of acetic acid esterification with n-pentanol using sulfated zirconia as a catalyst. Reactions were carried out in an isothermal well-mixed batch reactor at different temperatures (50-80°C), n-pentanol to acid molar ratios (1:1-3:1), and catalyst loadings (5-10 wt% in relation to the total amount of acetic acid). The reaction mechanism regarding the heterogeneous catalysis was evaluated considering pseudo-homogeneous, Eley–Rideal, and Langmuir–Hinshelwood model approaches. The reaction mixture was considered a nonideal solution and the UNIQUAC thermodynamic model was used to take into account the nonidealities in the liquid phase. The results obtained indicated that increases in the temperature and catalyst loading increased the product formation, while changes in the n-pentanol to acetic acid molar ratio showed no significant effect. The estimated enthalpy of the reaction was −8.49 kJ mol⁻¹, suggesting a slightly exothermic reaction. The Eley–Rideal model, with acetic acid adsorbed on the catalyst as the limiting step, was found to be the most significant reaction mechanism.     

Kinetics and mechanism of “reduced CO2” electrooxidation on electrodispersed platinum in different acid solutions

The electrooxidation of “reduced CO₂” electroadsorbates on electrodispersed platinum electrodes has been investigated in 0.05 M HClO₄, 1 M HClO₄, 0.5 M H₂SO₄ and 1 M H₃PO₄ at 25° C through voltammetry and potential step techniques. The overall reaction comprises three distinguishable processes, namely a first order triggering process, and two second order surface processes. The latter are influenced remarkably by the solution composition (anions). The second order reaction mechanism involves two distinguishable “ reduced CO₂” electroadsorbates which react independently with the OH species formed from H₂O electrooxidation on the bare platinum sites as the reaction proceeds. An interaction term has to be included in the rate equations to account for the experimental results. The mechanistic interpretation accounts for the values of the number of electrons per site ranging from 1 to 2.