Discrete Rh(III)/Fe(II) and Rh(III)/Fe(II)/Co(III) cyanide-bridged mixed valence compounds

The heterotrinuclear complexes trans- and cis-[{cis-VI-L(15)Rh(III)(μ-NC)}{trans-III-L(14S)Co(III)(μ-NC)}Fe(II)(CN)(4)](2+) are unprecedented examples of mixed valence complexes based on ferrocyanide bearing three different metal centers. These complexes have been assembled in a stepwise manner from their {trans-III-L(14S)Co(III)}, {cis-VI-L(15)Rh(III)}, and {Fe(II)(CN)(6)} building blocks. The preparative procedure follows that found for other known discrete assemblies of mixed valence dinuclear Cr(III)/Fe(II) and polynuclear Co(III)/Fe(II) complexes of the same family. A simple slow substitution process of [Fe(II)(CN)(6)](4-) on inert cis-VI-[Rh(III)L(15)(OH)](2+) leads to the preparation of the new dinuclear mixed valence complex [{cis-VI-L(15)Rh(III)(μ-NC)}Fe(II)(CN)(5)](-) with a redox reactivity that parallels that found for dinuclear complexes from the same family. The combination of this dinuclear precursor with mononuclear trans-III-[Co(III)L(14S)Cl](2+) enables a redox-assisted substitution on the transient {L(14S)Co(II)} unit to form [{cis-VI-L(15)Rh(III)(μ-NC)}{trans-III-L(14S)Co(III)(μ-NC)}Fe(II)(CN)(4)](2+). The structure of the final cis-[{cis-VI-L(15)Rh(III)(μ-NC)}{trans-III-L(14S)Co(III)(μ-NC)}Fe(II)(CN)(4)](2+) complex has been established via X-ray diffraction and fully agrees with its solution spectroscopy and electrochemistry data. The new species [{cis-VI-L(15)Rh(III)(μ-NC)}{trans-III-L(14S)Co(III)(μ-NC)}Fe(II)(CN)(4)](2+) and [{cis-VI-L(15)Rh(III)(μ-NC)}Fe(II)(CN)(5)](-) show the expected electronic spectra and electrochemical features typical of Class II mixed valence complexes. Interestingly, in the trinuclear complex, these features appear to be a simple addition of those for the Rh(III)/Fe(II) and Co(III)/Fe(II) moieties, despite the vast differences existent in the electronic spectra and electrochemical properties of the two isolated units.     

Electrochemical characterization of the redox couple of Fe(III)/Fe(II) mediated by grafted polymer electrode

A new grafted polymer electrode (GPE) (polystyrene as polymer) was grafted with acrylonitrile as a monomer using gamma irradiation to produce a new grafted polymer. The redox process of K₃Fe(CN)₆ during cyclic voltammetry was studied by the new GPE. The ratio of Ipc/Ipa >1 of GPE to GCE Ipc/Ipa = 1.7, indicating that this electrode is a reversible electrode and can be used in conductivity studies by voltammetric analysis. The physical properties of the new electrode GP have good hardness, insolubility, and stability at different high temperatures and at different pH. Also, the sensitivity under conditions of cyclic voltammetry is significantly dependent on pH, electrolyte, and scan rate. At different scan rates, two oxidation peaks and two reduction peaks of Fe(III) were observed in a reversible process: Fe(III) Fe(II), and Fe(II) Fe(0). Interestingly, the redox reaction of Fe(III) solution using GPE remained constant even after 15 cycles. It is therefore evident that the GPE possesses some degree of stability. The potential use of the grafted polymer as a useful electrode material is therefore clearly evident.     

Electrochemical characterization of the redox couple of Fe(III)/Fe(II) mediated by grafted polymer reference electrode (GPRE)

A grafted polymer reference electrode (GPRE) (polystyrene grafted with acrylonitrile as a monomer using gamma irradiation) was fabricated as a reference electrode using cyclic voltammetry (CV). The redox process of K₃Fe(CN)₆ during CV was studied. It was found that the redox current peaks of Fe(II)/Fe(III) in 0.1 M of KCl as supporting electrolyte is given the same oxidation–reduction current as in the Ag/AgCl reference electrode, indicating a good result of GPRE and, hence, it can be used for voltammetric analysis technique. The physical properties of GPRE include good hardness, insoluble in non-aqueous electrolytes (except dimethyl formamide and chloroform), and good stability at different solvents. In addition, the sensitivity under conditions of CV is significantly dependent on the scan rate (SR) and variation in concentration. At different SRs, redox peaks of K₃Fe(CN)₆ were observed in a reversible process: Fe(II)/Fe(III). Interestingly, the redox reaction of Fe(II)/Fe(III) solution using GCE versus GPRE remains constant even after 15 cyclings. It is therefore evident that the GPRE possesses some degree of stability. Also, the new reference electrode GPRE has improved the properties of electroanalysis of CV on the working electrode GCE in reliability with the relative standard deviation.     

Novel non-aqueous Fe(III)/Fe(II) redox couple for the catalytic oxidation of hydrogen sulfide to sulfur by air

A series of Fe(III) salts and organic solvents have been screened to develop novel non-aqueous catalysts for the conversion of H2S to sulfur. FeCl3/95% N-methylpyrrolidinone/5% H2O was found to be a most efficient non-aqueous system. The process chemistry, the proposed mechanism of catalytic oxidation of H2S, and the electrochemistry are discussed.     

Water soluble molecular switches of fluorescence based on the Ni(III)/Ni(II) redox change

The water soluble Ni(II) complexes of the cyclam derivatives with 1,3-benzodioxole and 1,2,3-trimethoxybenzene display the fluorescent emission typical of the covalently linked fluorophores, which results from a charge transfer excited state. On oxidation to Ni(III), the fluorescence is completely quenched due to the occurrence of an electron transfer (eT) process from the excited fluorogenic fragment Fl to the oxidized metal. Thus, fluorescence can be switched off/on at will, for several cycles, by consecutively oxidizing and reducing the metal center, in controlled potential electrolysis experiments both in acetonitrile and in aqueous 0.1 M HClO4. Occurrence of an eT process from Fl to Ni(III) ultimately depends upon the easy oxidation of Fl to Fl+, whereas failure of the occurrence of an eT process from Ni(II) to Fl has to be ascribed to the particular resistance of Fl fragments to the reduction.     

Influence of freezing of aqueous samples on the Fe(II)/Fe(III) equilibrium

The influence of freezing of aqueous samples on the Fe(II)/Fe(III) equilibrium has been investigated by ion chromatography. No change has been observed in the pH-range 2–5, irrespective of the freezing temperature.     

Titration curves in complexometric titrations with the redox system Fe(III)/Fe(II)

Potentiometric titrations of metal ions with EDTA have been carried out with a platinum or graphite electrode and the Fe(III)/Fe(II) redox system. In the absence of oxygen and for pH < 2 the titration curves may be described by an equation similar to that given previously for titrations with silver and mercury electrodes. Titration curves for bismuth and indium, which are more strongly complexed than iron, are asymmetrical and useful for analytical purposes. When the titrated ions are complexed less strongly than iron(III) ions the kinetics of metal complexation have a pronounced effect. The titration curves of thorium and copper, which react more rapidly than iron, are analytically useful. The curves recorded rapidly after titrant additions have a better end-point break than those which correspond to thermodynamic equilibrium. When a metal, e.g., nickel, is weakly bound by EDTA, and reacts more slowly than iron, a very small end-point break or none at all is observed.     

Photomagnetic effect in a cyanide-bridged mixed-valence {Fe(II)2Fe(III)2} molecular square

The self-assembly of [Fe(III)(Tp)(CN)(3)](-) and [Fe(II)(bik)(2)(S)(2)](2+) affords the cyanide-bridged mixed valence {Fe(III)(2)Fe(II)(2)}(2+) molecular square, which exhibits a photomagnetic effect under laser light irradiation at low temperature and also shows thermal spin-state conversion near ambient temperature.     

Cathodic stripping voltammetry of nickel: sonoelectrochemical exploitation of the Ni(III)/Ni(II) couple

The exploitation of the Ni(III)/Ni(II) transition as a means of quantifying the concentration of nickel within industrial samples was assessed. The methodology relies upon the reagentless electrodeposition of Ni onto a glassy carbon electrode and the subsequent oxidative conversion of the metallic layer to Ni(III). The analytical signal is derived from a cathodic stripping protocol in which the reduction of the Ni(III) layer to Ni(II) is monitored through the use of square wave voltammetry. The procedure was refined through the introduction of an ultrasonic source which served to both enhance the deposition of nickel and to remove the nickel hydroxide layer that results from the measurement process. A well-defined stripping peak was observed at +0.7 V (vs. AgAgCl) with the response found to be linear over the range 50 nM to 1 μM (based on a 30 s deposition time). Other metal ions such as Cu(II), Mn(II), Cr(III), Pb(II), Cd(II), Zn(II), Fe(III) and Co(II) did not interfere with the response when present in hundred fold excess. The viability of the technique was evaluated through the determination of nickel within a commercial copper nickel alloy and validated through an independent comparison with a standard ICP-AES protocol.     

Some quantum chemical aspects on outer-sphere electron-transfer reactions: the U(V)/Fe(III)-U(VI)/Fe(II) system

The activation energy and rate constant of U(V)-Fe(III) to U(VI)-Fe(II) outer-sphere electron-transfer reaction was studied using Marcus model. Experimental values were used for Gibbs energy change of the reaction, and energy surfaces were calculated by quantum chemical methods. The calculated rate constant was in reasonable accord with experimental value.     

The electrochemical Peltier effect observed with electrode reactions of Fe(II)/Fe(III) redox couples at a gold electrode

The electrochemical Peltier effect was studied at a gold electrode in solutions containing some Fe(II)/Fe(III) redox couples by measuring the local temperature change in the electrode/solution interphase under controlled-potential and controlled-current polarization. Relative values of the electrochemical Peltier coefficient for the cathodic process at equilibrium potential, which is denoted by (Π_c)_I=0, were determined by analyzing the observed temperature change as a function of current. The values of (Π_c)_I=0 were found to be positive for the Fe(H₂O)₆²⁺/Fe(H₂O)₆³⁺ systems in HClO₄ (1 M), HNO₃ (1 M), H₂SO₄ (0.5 M), and HCl (1 M), their magnitudes being very similar in the first three acid solutions, but smaller in the HCl solution. On the other hand, a negative value of (Π_c)_I=0 was obtained in the case of a Fe(CN)₆^4?/Fe(CN)₆^3? couple in a H₂SO₄ (0.5 M) solution. Such a difference in the Peltier coefficient is considered to be due to the difference in the ionic species of iron involved in the electrode reaction.     

Orbital interactions in Fe(II)/Co(III) heterobimetallocenes: single versus double bridge

Ferrocenyl cobaltocenium hexafluorophosphate (1) and ferrocenylene cobaltocenylenium hexafluorophosphate (2) are investigated by a range of spectroscopic methods. Both compounds are diamagnetic, in contrast to an earlier report indicating a temperature-dependent paramagnetism of 2. Electronic absorption spectra of 1 and 2 are presented and fully assigned up to 50 000 cm(-1) on the basis of electronic structure (DFT) calculations and spectral comparisons with ferrocene and cobaltocenium. The lowest-energy bands, I, of both 1 and 2 correspond to metal-to-metal CT (MMCT) transitions; further intermetallocene charge-transfer bands are identified at higher energy (bands III and V). On the basis of the spectroscopic properties, a trans geometry and a twisted structure are derived for 1 and 2, respectively, in solution. Analysis of the I bands gives orbital mixing coefficients, alpha, electronic-coupling matrix elements, V(AB), and reorganization energies, lambda. Importantly, alpha and V(AB) are larger for 1 than for 2 (0.07 and 1200 cm(-1) vs 0.04 and approximately 600 cm(-1), respectively), apparently in contrast to the presence of one bridge in 1 and two bridges in 2. This result is explained in terms of the respective electronic and geometric structures. Reorganization energies are determined to be 7600 cm(-1) for 1 and 4600 cm(-1) for 2, in qualitative agreement with the analogous Fe(II)-Fe(III) compounds. The general implications of these findings with respect to the spectroscopic and electron-transfer properties of bimetallocenes are discussed.     

Cobalt(II)/manganese(II)-based molecular metamagnets

This mini-review covers recent progress in the field of cobalt(Ⅱ)/manganese(Ⅱ)-based molecular metamagnets, which can undergo magnetic phase transitions to a state with a net magnetic moment under the stimulation of external field. We simply discuss mean field theory describing these compounds and the important role of the magnetic anisotropy. The experimental properties of the known Co(Ⅱ)/Mn(Ⅱ) metamagnets are discussed, with emphasis on the variety of means by which the metamagnetic transitions have been observed and studied.     

Determination of Fe(II)-Fe(III) and Fe(III)-Ni(II) by the two-component potentiometric complexometric titration

Summary The two-component complexometric potentiometric titration has been applied to the simultaneous determination of Fe(III) and Fe(II), and of Fe(III) and Ni(II) in solution. In each case the two analytes were determined by reading the end-points directly from the titration curve. The end-points are determined in a sense arbitrarily, but they are repeatable and easy to be detected precisely. However, the apparent (found) analytical results are biased. They are effectively corrected with the use of a set of two calibration equations (uncomplete second degree polynomials), which approximate the relationship between found endpoints and true concentrations of analytes in solution. The regression coefficients in the equations are determined on the basis of titration data obtained for standard solutions whose compositions correspond to a 2² factorial. Permanent address: Department of Analytical Chemistry, Jagiellonian University, Krakow     

Cu(I)/Fe(III) promoted dicarbonylation of aminopyrazole via oxidative CH coupling with methyl ketones

Cu(I)/Fe(III) promoted C4-dicarbonylation of 5-aminopyrazole is developed. The strategy involved radical triggered direct oxidative coupling of 5-aminopyrazoles with methyl ketones using aerial oxygen as a source of oxygen in newly generated carbonyl group. CuI is used as catalyst and FeCl₃·6H₂O is used as additive and the reaction proceeded at 120?°C in DMSO for 9–12?h. It is found that use of Cu(II) catalyst gives the thiomethylated product by reacting with DMSO instead of oxidative coupling. A plausible mechanism is also given.     

Vibrational spectra of two Fe(III)/EDTA complexes useful for iron supplementation

The infrared and Raman spectra of Na[FeEDTA(H₂O)]·2H₂O and Na₄[(FeEDTA)₂O]·3H₂O (EDTA = tetra anion of ethylenediaminetetraacetic acid), two complexes proposed as adequate for iron supplementation, were recorded and analyzed in relation to its structural peculiarities. Some comparisons between the recorded spectra are also presented, and the characteristics of the carboxylate motions as well as those of the metal-to-ligand vibrations are discussed in detail.     

Fe(III)Fe(III) and Fe(II)Fe(III) Complexes as Synthetic Analogues for the Oxidized and Reduced Forms of Purple Acid Phosphatases

Novel Fe(III)Fe(III) and Fe(II)Fe(III) complexes [Fe(2)(BBPMP)(&mgr;-OAc)(&mgr;-X)](n)() (1, X = OAc(-), n = 1+; 2, X = OH(-), n = 1+; 3, X = OAc(-), n = 0; 4, X = OH(-), n = 0), where BBPMP(3)(-) is the anion of 2,6-bis[(2-hydroxybenzyl)(2-pyridylmethyl)aminomethyl]-4-methylphenol, and OAc(-) is acetate, were prepared in order to provide models for the active site of purple acid phosphatases (PAPs). Complex 1 was obtained by the reaction of H(3)BBPMP with Fe(ClO(4))(2).6H(2)O in methanol and sodium acetate trihydrate under ambient conditions, while complex 3 was synthesized as described for 1, under an argon atmosphere with low levels of dioxygen. 2 was isolated from 1in acetonitrile by a substitution of the bridging acetate group by hydroxide, while 4 was generated in solution during a spectropotentiostatic experiment on 2, under argon. Complex 1, [Fe(III)(2)(BBPMP)(&mgr;-OAc)(2)]ClO(4).H(2)O, has been characterized by X-ray crystallography. Crystal data: monoclinic, space group P2(1)/n, a = 14.863(5) ?, b = 12.315(3) ?, c = 20.872(8) ?, beta = 90.83(3) degrees, Z = 4. IR, M?ssbauer, magnetic, electronic absorption, and electrochemical properties of 1-3 have been investigated, and some of these properties represent a contribution to the understanding of the dinuclear iron center of PAPs. Complexes 2, [Fe(III)(2)(BBPMP)(&mgr;-OAc)(&mgr;-OH)]ClO(4) (lambda(max) = 568 nm/epsilon = 4760 M(-)(1) cm(-)(1)), and 4 [Fe(II)Fe(III)(BBPMP)(&mgr;-OAc)(&mgr;-OH)] (lambda(max) = 516 nm/epsilon = 4560 M(-)(1) cm(-)(1)), constitute good synthetic analogues for the chromophoric site for the oxidized and reduced forms, respectively, of the enzyme.     

Electrochemistry of vitamin B12: Part IX. The Co(III)/Co(II) couple in non-aqueous solvents

The thermodynamic and kinetic characteristics of the Co(III)/Co(II) couple are investigated as a function of the solvent and thesixth axial ligand. With solvatocobalamins the thermodynamics of the Co(III)/Co(II) oxido-reduction reaction essentially reflect the strength of the Co(III)-solvent interaction. The order of the solvents in this connection appears to beH₂O>DMSO>ROH. The kinetics of the reaction parallels and amplifies the thermodynamic effects: the stronger the Co(III)-solvent interaction, the slower the reaction. While chloride and acetate ions appear as very weak ligands in water, they are much stronger in aliphatic alcohols and DMSO. The variations of the thermodynamic factors observed as a function of the solvents and the ligands are rationalized in terms of interaction of the solvent with Co(II) and with the anionic ligand and of the affinity of the ligand with Co(III). The kinetics of the Co(III)/Co(II) oxido-reduction reaction, involving both electron transfer and bond-breaking, again parallels and amplifies the thermodynamic effect. The stretching of the Co-ligand bond and the solvation of the anionicligands appear as the main kinetic factors.     

Electrochemical study of the Sb(V)/Sb(III) couple on a glassy carbon rotating-disk electrode

The kinetics of the reduction of Sb(V) at a glassy carbon rotating-disk electrode have been investigated in 9.5 M HCl. The current-potential curve is characterized by a single irreversible wave, the limiting current being linearly related to the Sb(V) concentration and the square root of the rotation rate. Kinetic parameters of the reaction have been evaluated. Anodic oxidation currents of Sb(III) cannot be quantitatively measured owing to the interference of the oxidation of chloride.     

Adsorption behavior of Fe(II) and Fe(III) ions on thiourea cross-linked chitosan with Fe(III) as template

A new type of thiourea cross-linked chitosan with Fe(III) as template (TCCTS template) was synthesized. The adsorption of Fe(II) and Fe(III) on this TCCTS template was studied. The factors affecting adsorption such as pH and contact time were considered. The results showed that the optimum pH value for adsorption was pH = 5.0 and the adsorption equilibrium time was about 60 min. The adsorption isotherms and kinetics were investigated, and the equilibrium data agreed very well with the Langmuir model and the pseudo second-order model could describe adsorption process better than the pseudo first-order model. Results also showed that TCCTS template was a favourable adsorbent for Fe(II) and Fe(III) in aqueous solution.