Simultaneous determination of gallium(III) and indium(III) by derivative spectrophotometry

A simple, selective and sensitive derivative spectrophotometric method is proposed for the simultaneous determination of gallium(III) and indium(III) in mixtures using 1-(2-pyridylazo)-2-naphthol in cationic micellar medium, without any prior separation. Beer's law is obeyed between 2.80x10(-1)-3.63 and 4.60x10(-1)-9.20 mug ml(-1) concentration of Ga(III) and In(III) at 550 and 542 nm, the isodifferential points of indium and gallium complexes in the first-order derivative mode, respectively. The proposed method is successfully applied for the determination of gallium and indium in standard reference materials and synthetic binary mixtures with a relative error of +/-2.07 and +/-2.55%, respectively.     

Indium determination in different environmental materials by electrothermal atomic absorption spectrometry with Amberlite XAD-2 coated with 1-(2-pyridylazo)-2-naphthol

Methods were developed for indium (In) determination in complex ores by electrothermal atomization atomic absorption spectrometry using matrix modification after its separation with Amberlite XAD-2 coated with 1-(2-pyridylazo)-2-naphthol (PAN). Palladium-magnesium, nickel, and zinc nitrates were used as matrix modifiers and were compared in terms of maximum pyrolysis temperature, sensitivity and background signal. They have enhanced the absorption signals for indium, respectively eliminating the matrix interferences. The standard additions method was applied. The relative standard deviations for six replicate determinations were in the range 0.3-4.0% for indium in different ores samples for indium concentrations 7.6-209 μg g⁻¹. The recommended method was applied to the indium determination in real samples. The data obtained by this method were in good agreement with those obtained by ICP-AES.     

Differential pulse polarography determination of indium after column preconcentration with [1-(2-pyridylazo)-2-naphthol]-naphthalene adsorbent or its complex on microcrystalline naphthalene

A highly selective, sensitive and economical differential pulse polarographic method has been developed for the determination of trace amount of indium in various samples after adsorption of its 1-(2-pyridylazo)-2-naphthol on naphthalene in the pH range of 6.5-11.5. After filtration, the solid mass is shaken with 8 ml of 1 M hydrochloric acid and indium is determined by differential pulse polarography (DDP). Indium can alternatively be quantitatively adsorbed on [1-(2-pyridylazo)-2-naphthol]-naphthalene adsorbent packed in a column and determined similarly. The detection limit is 0.2 ppm (signal to noise ratio=2) and the linearity is maintained in the concentration range 0.8-125 ppm with a correlation coefficient of 0.9994 and relative standard deviation of +/-0.96%. Characterization of the electroactive process included an examination of the degree of reversibility. Various parameters such as the effect of pH, volume of aqueous phase and interference of a number of metal ions on the determination of indium have been studied in detail to optimize the conditions for determination in various samples.     

Simultaneous Determination of Gallium(III) and Indium(III) in Urine and Water Samples with Cloud Point Extraction and by Inductively Coupled Plasma Optical Emission Spectrometry

A simple, sensitive, and selective method for the determination of gallium and indium in different samples at trace levels is presented. This method was based on complexation of analyzes with 2-(5-bromo-2- pyridylazo)-5-diethylaminophenol (5-Br-PADAP) in the presence of t-octylphenoxy-polyethoxyethanol (Triton X-100). After phase separation, the analyzed concentrations were determined by inductively coupled plasma optical emission spectrometry. Quantitative extraction of gallium and indium was performed at pH 7.0, 1.7 mmol L^?1, 5-Br-PADAP, 1.3% (w/v) Triton X-100 and at 75°C. The relative standard deviations (RSD) of this method were between 0.3% and 1.6% (C = 20 ng mL^?1, n = 9). The calibration curve is linear over the concentration range 6–200 ng mL^?1 for gallium and 2–200 ng mL^?1 for indium, respectively. The limits of detection (LOD) for gallium and indium were 0.72 and 0.28 ng mL^?1, respectively. The results showed the developed method was not susceptible to matrix effects, providing recoveries between 98% and 102%. The accuracy of the developed method was evaluated by the analysis of spiked certified reference materials. The developed method was successfully applied to gallium and indium determination in urine and lake water with satisfactory results.     

Rapid Fluorometric Determination of Trace Indium(III) in Microemulsion Medium after Preconcentration and Separation by Sulphydryl Dextrane Gel

A new highly sensitive, stable, and accurate fluorometric method for the determination of indium(III) has been established in cetyltrimethylammonium bromide(CTMAB) microemulsion media. The excellent color-forming reagent 2,6,7-trihydroxy-9-(3,5-dibromo-4-hydroxyphenyl) fluorone (DBH-PF) reacts with indium(III) to form a purple complex with a 3 : 1 (ligand to metal) ratio in HAc-NaAc buffer solution at pH 4.94. The emission peak occurs at 556 nm with excitation at 525 nm. Indium(III) can be determined in the linear range of 0.005–0.30 μg mL⁻¹ with a detection limit of 0.0029 μg mL⁻¹. Foreign ions are eliminated by preconcentration and separation with sulfhydryl dextranegel (SDG). The proposed method has been satisfactorily examined for the determination of indium(III) in ore and sludge samples. The relative standard deviations are in all instances less than 3.0%, and the recoveries are between 94.7, and 99.5%. __________ From Zhurnal Analiticheskoi Khimii, Vol. 60, No. 9, 2005, pp. 979–984. Original English Text Copyright ? 2005 by Wei Qin, Du Bin, Zhang Hui, Li Yan, Li Zaijun. The text was submitted by the authors in English.     

Simultaneous determination of gallium and indium with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol in cationic micellar medium using derivative spectrophotometry.

A new derivative spectrophotometric method for rapid and selective trace analysis of Ga3+ and In3+ and for their simultaneous determination using 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol in a cationic micellar medium is reported. Molar absorptivity and Sandell's sensitivity of 1:1 Ga+ and In3+ complexes at their lambda(max) 553 nm and 558 nm are: 7.22 x 10(4) l mol(-1) cm(-1) and 5.85 x 10(4) l mol(-1) cm(-1), and 0.96 ng cm(-2) and 1.96 ng cm(-2), respectively. Linearity is observed in the concentration range 0.023-0.700 microg ml(-1) for gallium and 0.076-1.52 microg ml(-1) for indium; IUPAC detection limit is 0.012 and 0.035 ng ml(-1), respectively. These metal ions interfere with the determination of each other. However, 0.07-0.70 microg ml(-1) Ga3+ and 0.115-1.150 microg ml(-1) In3+ could be determined simultaneously when present together by the derivative method without any prior separation. The proposed procedures have been successfully applied for the individual and simultaneous determination of gallium and indium in synthetic binary mixtures, standard reference materials and environmental samples.     

Colour reaction of platinum(II) with 5-(4-nitrophenylazo)-8-(p-toluenesulphonamido)-quinoline and its analytical applications

A simple, rapid and sensitive spectrophotometric method has been developed for the determination of platinum. 5-(4-Nitrophenylazo)-8-(p-toluenesulphonamido)quinoline (NPTSQ) reacts with platinum(II) almost instantaneously in alkaline solution to form a violet-red 1:2 complex with an absorption maximum at 640 nm. Beer's law is obeyed over the concentration range 0-1 mug/ml platinum. The molar absorptivity is 1.37 x 10(5) 1.mole(-1).cm(-1). The method has been used for the determination of microamounts of platinum in catalysts and anode slime.     

反相高效液相色谱法测定1-(对偶氮苯)-3-(5-氯-2-吡啶)-三氮烯

采用ZORBAX Ec lipse XDB-C8(4.6 mm i.d.×150 mm,5μm)色谱柱,乙腈流动相,流速0.70 mL.m in-1,检测波长407 nm,建立了测定1-(对偶氮苯)-3-(5-氯-2-吡啶)-三氮烯的反相高效液相色谱法.该方法线性范围0.5-8.0 mg.L-1,相对标准偏差为2.5%(c=5.0 mg.L-1,n=5),回收率在95.7%-105%之间.     

Spectrophotometric determination of traces of gallium and indium with 1-(2-pyridylazo)-2-naphthol

1-(2-Pyridylazo)-2-naphthol (PAN) reacts with either gallium or indium at pH 5–6 giving a red complex in an aqueous medium in the presence of N.N-dimethyl-formamide. The maximum absorption of both PAN complexes of gallium and indium in an aqueous solution is at 545 mμ. The gallium-PAN complex shows a characteristic enhancement of color by addition of small amounts of ethers. Based on this selective enhancement reaction, gallium can be determined in the presence of other metals without separation. The results of determining gallium and indium in the presence of each other are reported. Both gallium and indium form M₂(PAN)₃; but in the presence of certain organic solvents, a different gallium complex, Ga(PAN)₅, and the same indium complex, In₂(PAN)₃, are formed. The reaction of PAN with cadmium can be masked by iodide; an example of determining indium in the presence of cadmium is given. The PAN method has a sensitivity of 0.003 μg/cm² for gallium and 0.005μg/cm² for indium and an absorptivity of 24,900 for the Ga-PAN complex and of 24,500 for the In-PAN complex, respectively. The methods have been successfully applied to the determination of both gallium and indium in germanium thin films.     

Polarographic determination of indium(III) after salting-out extraction of the bromide complex into acetonitrile

A simple and sensitive method has been developed for the polarographic determination of indium(III) after solvent extraction into acetonitrile, salted-out from aqueous solution with sodium bromide. The extracted indium(III)-bromide complex gives a well-defined d.c. wave with E(1 2 ) = -0.69 V vs. SCE. The wave-height is directly proportional to the concentration of indium(III) from 1.6 x 10(-6) to 3.0 x 10(-4)M with respect to the original aqueous solution. In the a.c. polarographic method, a linear calibration curve is obtained for indium(III) over the concentration range from 1.6 x 10(-6) to 1.5 x 10(-5)M, and interference from most foreign ions can be eliminated. In particular, 10.0 mg of Fe(III) and 2.5 mg of Tl(III) are tolerated when 1.0 g of ascorbic acid is added. The lower limit of determination is 8 x 10(-8)M indium(III) by the square-wave polarographic method.     

7-(1-苯偶氮)-8-羟基喹啉-5-磺酸-曲拉通X-100双波长分光光度法测定微量铟

研究了７－（１－苯偶氮）－８－羟基喹啉－５－磺酸与铟的显色反应及分析应用,在曲拉通Ｘ－１００存在下,于ｐＨ４．５的ＮａＡｃ－ＨＡｃ缓冲介质中,铟与题示试剂形成组成比为１∶３的黄色配合物,最大吸收波长为４４０ｎｍ,表观摩尔吸光系数为３．８６×１０４Ｌ·ｍｏｌ－１·ｃｍ－１,同时在５５０ｎｍ呈现负峰,用双峰双波长法测定铟的表观摩尔吸光系数为７．３３×１０４Ｌ·ｍｏｌ－１·ｃｍ－１,灵敏度为单波长法的１．９倍,线性范围为０～０．６ｍｇ／Ｌ,该法用于硫硒化锌基陶瓷颜料及镀膜玻璃中铟的测定,结果满意。     

Spectrophotometric determination of silver with 2-(2-quinolylazo)-5-diethylaminophenol as chromogenic reagent

A new chromogenic reagent, 2-(2-quinolylazo)-5-diethylaminophenol (QADEAP) was synthesized. A highly sensitive, selective and rapid method for the determination of silver based on the rapid reaction of silver(I) with QADEAP has been developed. In the presence of citric acid-sodium hydroxide buffer solution (pH=5.0) and sodium dodecyl sulfonate (SDS) medium, QADEAP reacts with silver to form a violet complex of a molar ratio 1:2 (silver to QADEAP). The molar absorptivity of the complex is 1.33x10(5) L mol(-1) cm(-1)at 590 nm. Beer' s law is obeyed in the range of 0.01-0.6 micro g mL(-1). The relative standard deviations for eleven replicate samples of 0.2 microg mL(-1) is 1.38%. This method was applied to the determination of silver in water with satisfactory results.     

Extraction spectrophotometric determination of maneb with 1-(2'-pyridylazo)-2-naphthol (PAN)

A rapid, sensitive, simple and selective spectrophotometric method has been developed for the determination of micro-quantities of maneb (manganese ethylenebisdithiocarbamate) after extraction of the manganese-PAN complex in isobutyl methyl ketone (MIBK). The complex absorbs strongly at 550 nm. Beer's law is obeyed over the concentration range 0.37-3.75 microg/ml. The molar absorptivity was found to be 4.1 x 10(4) l. mole(-1) . cm(-1). The developed method has been applied to the determination of maneb in commercial formulations, synthetic mixtures, grain and in the presence of various other dithiocarbamates.     

Sensitive spectrophotometric determination of La(III) with 1-(2-pyridylazo)-2-naphthol

A simple and sensitive method for spectrophotometric determination of lanthanum has been developed. At pH 9.6, in presence of 50% ethanol, lanthanum reacts with 1-(-2-pyridylazo)-2-naphthol (PAN) to form a red complex which has two absorption maxima, at 545 and 510 nm. The molar absorptivity at 545 nm is 0.55 × 10⁴ liters · mol^?1 cm^?1. On the other hand, lanthanum reacts with PAN in pure ethanol to form a red complex at 530 nm, with high molar absorptivity (8 × 10⁴ liters · mol^?1 cm^?1).     

Rapid spectrophotometric determination of palladium in titanium alloys with 2-(5-bromo-2-pyridylazo)-5-(diethylamino)phenol

A rapid spectrophotometric method for the determination of Pd in titanium alloys is proposed. It is based on the reaction of 2-(5-bromo-2-pyridylazo)-5-(diethylamino)phenol with Pd(II) in a sulphuric acid medium in the presence of ethanol. Beer's law is obeyed up to 40 mug of Pd. The molar absorptivity is 4.5 x 10(4) 1.mole(-1).cm(-1). The standard deviation is 0.3 mug of Pd and the coefficient of variation varies from 0.8 to 3.3%. The elements ordinarily present in such alloys do not interfere. High selectivity is achieved by using fluoroboric acid as masking agent. Improvements in the method of sample decomposition also contribute to the rapidity of the method.     

Spectrophotometric determination of mn(II) with 1-(2-quinolylazo)-2,4,5- trihydroxybenzene and microdetermination of mn in foodstuffs

A method is described for the spectrophotometric determination of manganese in foodstuffs by means of its complex with 1-(2-quinolylazo)-2,4,5-trihydroxybenzene, formed in alkaline medium. The molar absorptivity of the complex is 4.6 x 10(4) l.mole(-1).cm(-1).     

Formation of mixed complexes in the extraction of indium with 1-(2-pyridylazo)-2-naphthol

A detailed study has been made of the extraction of indium into chloroform by 1-(2-pyridylazo)-2-naphthol (PAN). The rate of extraction is maximal if the PAN is added to the aqueous phase and is not added as its chloroform solution. The ratio of indium to PAN is 1:1 and the cationic complex can be extracted only if a suitable anion is present, such as acetate or chloride.     

Sensitive spectrophotometric determination of nickel(II) with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol

A simple, selective and highly sensitive procedure for spectrophotometric determination of nickel has been developed. At pH 5.5, nickel reacts with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol in water-ethanol medium to form a red-violet complex which has two absorption maxima, at 520 and 56Onm. The molar absorptivity at 56Onm is 1.26 x 10(5) l.mole(-1).cm(-1). Beer's law is obeyed for 0-15 mug of nickel. Nickel in aluminium alloys and electroplating waste-water has been determined by this method.     

Interaction of nickel with 4-(2'-benzothiazolylazo) salicylic acid (BTAS) and simultaneous first-derivative spectrophotometric determination of nickel(II) and iron(III)

The solution properties of nickel complex with 4-(2'-benzo-thiazolylazo) salicylic acid (BTAS) have been studied by zero-order absorption spectrophotometry in 40% (v/v) ethanol at 20 degrees C and an ionic strength of 0.1 mol dm(-3) (KNO(3)). The equilibria that exist in solution were established and the basic characteristics of complexes formed were determined. A new direct spectrophotometric method for the determination of trace amounts of the nickel is proposed based on the formation of the Ni (BTAS) complex at pH 7.0. The absorption maximum, molar absorbtivity, and Sandell's sensitivity of 1:1 (M:L) complex are 525 nm, 0.6 x 10(4) l mol(-1) cm(-1) and 2.824 x 10(-9) microg cm(-2), respectively. The use of first-derivative spectrophotometry eliminates the interference of iron and enables the simultaneous determination of nickel and iron using BTAS. Quantitative determination of Ni(II) and Fe(III) is possible in the range (0.59-7.08) and (2.1-8.4) microg ml(-1), respectively with a relative standard deviation of 0.5%. The proposed method has been successfully applied to the simultaneous spectrophotometric determination of nickel and iron in steel alloys and aluminum alloys.     

H-point standard addition method for simultaneous spectrophotometric determination of Co(II) and Ni(II) by 1-(2-pyridylazo)2-naphthol in micellar media

A very simple and selective spectrophotometric method for simultaneous determination of Co(II) and Ni(II) by 1-(2-pyridylazo) 2-naphthol (PAN), in micellar media, using H-point standard addition method (HPSAM) is described. The ligand and its metal complexes (Co(II)-PAN and Ni(II)-PAN) were made water-soluble by the neutral surfactant Triton X-100, and therefore, no extraction with organic solvents was required. Formation of both the complexes was complete within 10 min at pH 9 (adjusted by ammonia buffer). The linear range was 0.10-2.00 microg ml(-1) for Co(II) and 0.05-1.50 microg ml(-1) for Ni(II). The relative standard deviation (R.S.D.) for the simultaneous determination of 0.50 microg ml(-1) each of Co(II) and Ni(II) was 2.32 and 3.13%, respectively. Interference effects of common anions and cations were studied and the method was applied to simultaneous determination of Co(II) and Ni(II) in alloy samples. The method was compared with derivative spectrophotometric method.