应用波长色散X荧光仪和多晶X射线衍射仪联用技术 鉴定进口铜矿和含铜物料

本文首次研究进口可利用含铜物料与进口铜矿属性的不同特性并建立鉴定方法,采用X荧光光谱法和X射线衍射光谱法联用技术建立铜矿和含铜物料属性的鉴别方法。通过X荧光光谱法对铜矿和含铜物料中元素进行定性半定量分析,再用X射线衍射光谱法对铜矿和含铜物料的特征谱峰进行扫描,与X衍射仪中标准卡片比对分析,能够确定铜矿和含铜物料的物相组成。结果显示：X荧光光谱法铜矿和含铜物料的共同特点铜的含量较高,达到冶炼铜对原料的要求,硅、铁、钠、钙和镁元素都能够检出。差异性在铅和锌元素在含铜物料中较高,在铜矿石中基本未检出;在X荧光光谱法检测出的金属元素,通过X衍射仪扫描后与标准图片比对,各元素以不同的形式存在于含铜物料中,且有规律可循。     

EPR analysis of copper particles in aqueous systems

Experimental and theoretical EPR spectra of nanodispersed copper synthesized by the reduction of copper dichloride in aqueous solutions, thin films of electrolytic copper, and copper ions are analyzed. It is established that the reduction of copper dichloride in an aqueous solution in the presence of a surfactant yields copper nanoparticles. The EPR spectra are shown to be sensitive to the oxidation of copper nanoparticles in both an aqueous medium and in thin copper films prepared by electrolytic deposition.     

Molten and solidification properties of copper nanoparticles

The melting and solidifying processes are carried out using molecular dynamics simulations. The influencing mechanism of the simulation size and the crystal configuration after solidification on the molten and the solidification properties is explored. The results demonstrate that the crystal structure of solidified copper nanoparticle is sensitive to the size of the copper nanocubes. Polycrystalline appears in the solidified copper nanoparticle for the relatively larger copper cubes; correspondingly, the grain boundaries give rise to the increase of the average atomic energy. Whereas for the relatively small copper cubes, the solidified copper nanoparticles mainly present monocrystalline structure. Moreover, the relationship between the internal pressure of the liquid copper droplets and the droplet diameter is studied to clarify the surface tension property at nanoscale. It is found that the internal pressure of the liquid copper droplets is logarithmically linearly dependent on the diameter of the copper droplets, implying that the surface tension of the liquid copper is not sensitive to the diameter of the liquid copper droplets. The present findings will be helpful to the preparation of the copper nanoparticle‐based thin ribbon. Copyright © 2016 John Wiley & Sons, Ltd.     

Kinetics of the dissolution of copper metal in aqueous solutions containing unsaturated organic ligands and copper(II)

The kinetics of the dissolution of copper metal in an aqueous solution containing copper(II) and an unsaturated organic ligand was followed by using an automated flow-injection analysis technique to determine the concentration of copper(I) in solution as a function of time. The results suggest that the rate of dissolution of the copper metal is dependent on electron transfer between the copper(II) and copper atoms on the surface of the copper metal, and on the stabilization of copper(I) by the unsaturated organic ligand in solution.     

Rapid determination of copper in plants by neutron activation analysis

A rapid and simple neutron-activation analysis method has been developed for the determination of copper in plant leaves. Irradiated samples are dissolved in a mixture of fuming nitric acid, 70% perchloric acid and concentrated sulphuric acid in the presence of copper carrier solution. The copper in the resulting solution is extracted as copper cupferronate into chloroform and back-extracted into concentrated ammonia solution. The copper is precipitated as sulphide with 3% aqueous thioacetanude solution and the precipitate is dissolved in nitric acid. The induced activity of copper-64 in the resulting solution is counted with a 400-channel analyser. The photopeak of the annihilation energy of copper-64 at 0.51 MeV is compared with that of a copper standard processed in the same manner. After counting, the chemical yield of the separated copper is found by re-irradiating aliquots of the copper nitrate solution and comparing the induced activity of coppcr-66 at 1.04 MeV with that of another standard processed in a similar manner. The time required to complete the analysis, including the second irradiation and all radioactivity measurements, is about 25 min. The accuracy of the method was checked by analysing a biological standard of known copper content. The proposed method was successfully applied to the determination of copper in the leaves of 10 different plants (copper content 4-30 ppm).     

地质样品中铜的四个相态的同时测定

根据铜矿物各相的浸取特性，确定了自由氧化铜相、结合氧化铜相、次生硫化铜相及原生硫化铜相的浸取体系及浸取条件；确定了稳定的浸取率常数。利用铜各相态的浸取常数建立数学模型，采用目标约束遗传算法(GA)对一次性浸取测得的浸取总量进行计算，求得铜各相态的含量。方法的相对标准偏差(％)为：自由氧化铜相1．5，结合氧化铜相17．6，次生硫化铜相1．9，原生硫化铜相2．7，总铜0．8。     

The differential pulse anodic stripping voltammetry of copper and lead and their determination in EDTA extracts of soils with the mercury film glassy carbon electrode

The differential pulse anodic stripping voltammetry of copper and lead at the mercury film glassy carbon electrode is discussed. The mercury film prevents the occurrence of a monolayer stripping peak for copper. The influence of antimony and bismuth on the anodic stripping voltammetric behaviour of copper and lead is discussed. An interaction between copper and antimony distorts the copper stripping peak and gives rise to an intermediate peak. The method described is suitable for determining copper and lead simultaneously in EDTA extracts of soils.     

碘量法测定铜锍中铜含量

根据铜锍的组成结构特点,建立了一种测定铜锍中铜含量的方法,重点讨论了混合酸对铜锍进行溶解的前处理及样品滴定过程。在4.80%~32.00%铜的测定范围内,加标回收率为97.70%~101.26%,相对标准偏差为0.24%~0.53%。方法能够较好地解决铜锍中铜含量测定难的问题。     

铜锍中铜含量测定的研究

根据铜锍的组成结构特点,建立了一种测定铜锍中铜含量的方法,重点讨论了混合酸对铜锍进行溶解的前处理及样品滴定过程。方法铜的测定范围：4.80%~32.00%,回收率：97.70%~101.26%,精密度即标准偏差：0.026 %~0.10%。该方法能够较好地解决铜锍中铜含量测定难的问题。     

Analysis of mixtures of compounds of copper using K-edge X-ray absorption spectroscopy

Summary A determination is described of copper metal, oxide, and hydroxide in samples containing both nickel and copper. The analysis was based on K-edge x-ray absorption spectra of the copper. This allowed us to consider the chemical states of copper and ignore the nickel also present. The method involved fitting linear combinations of copper standard spectra to the spectrum from copper in the sample. The fit composition that minimized the variance gave the sample composition. The work demonstrated that K-edge x-ray absorption spectra are sufficiently characteristic to allow their use for quantification of components in mixtures. This method of analysis is complemented by diffraction and less general techniques. It is a strength of x-ray absorption edge analysis that it is element-specific and applicable to most elements maintained under any conditions of temperatures, pressure, and atmosphere.     

电位活化现象与金属电沉积初始过程的研究

进行了恒电流电位-时间曲线和循环伏安曲线的测定，显示了铁电极进行氰化物镀铜时，镀层沉积前铁表面的电位活化过程. 对铁电极上焦磷酸盐镀铜的初始过程研究表明，由于铜的析出电位较正，铜是在未活化的电极表面上沉积的，因此镀层的结合强度很差.采用氩离子溅射和X射线光电子能谱相结合的方法，检测焦磷酸盐镀铜层和铁基体界面区含氧量的变化，证明了氧化层的存在. 通过添加辅助络合剂和控制起始电流密度的方法，可以增强无氰电镀时阴极的极化. 当铜的析出电位负于铁基体的活化电位时，可显示出铁表面的电位活化过程，定量测量镀层的结合强度也与氰化物电镀相近.     

New method for the spectrophotometric determination of ultramicro amounts of copper

A deep yellow colour is formed by the reaction with phenol and chloramine-T in the presence of copper, and this reaction is used for the photometric determination of copper. An aqueous solution of copper and the reagents at pH 11.5-11.6 is heated. The molar absorptivity at 410 mmu, is 2.32 x 10(6). The method has been used satisfactorily to determine ultram amounts of copper in high-purity silicon.     

海藻酸酮膜表面的配位结构及催化MMA聚合的性能

将海藻酸钠(SA)与CuCl2.2H2反应得到一种配位聚合物海藻酸酮(Cu-An)。以ESR、电导率、IR和SPS方法对此配位聚合物进行表征,确定了组成与结构：同时研究了甲基丙烯酸甲酯(MMA)在该配位聚合物膜、HSO3^-和水体系催化引发作用下的聚合反应历程。结果表明,配位聚合物的中心离子Cu^2^+与两个海藻酸(An)链节单元上的两个羧羟基氧原子和两个离解氢原子的羧羟基氧原子以共价型配位,配位数为4.MMA在上述的催化引发体系中是按照自由基加聚反应历程进行聚合的,PMMA呈无规结构。Cu-An在催化引发体系中起着催化剂的配位催化作用。     

环氧树脂导电胶用铜粉抗氧化性

根据铜本身具有的性质,选用γ-氨丙基甲基二乙氧基硅烷（KH-902）对铜粉进行改性,并采用FT-IR、超景深显微镜、TG、SEM及EDS技术对改性铜粉及铜粉导电胶进行表征。 结果表明,添加硅烷偶联剂KH-902可以有效改善铜粉的易氧化的问题,当添加量为3%时,不仅可以明显改善铜粉导电胶在高温固化下抗氧化性能,而且铜粉在环氧树脂胶体体系中能够均匀分散,且铜粉与铜粉之间的搭接紧密,具有良好的导电性能,体积电阻率仅1.31×10-2 Ω·cm。     

Simultaneous adsorption of copper ions and humic acid onto an activated carbon

In this study, simultaneous adsorption of copper ions and humic acid (HA) from Aldrich onto an activated carbon is investigated. It is found that the HA adsorption in the absence of copper decreases as the pH is increased. It leads to a reduction of 34.7% in the specific surface area of carbon. There exists a critical concentration (CC) of HA for copper adsorption. At HA concentrations < CC, a decrease in copper adsorption is observed; however, the HA improves the adsorption at HA concentrations > CC. An increase in ionic strength can enhance the copper uptake; however, zinc and/or cobalt ions have an insignificant influence on copper adsorption. The adsorption is significantly increased by citric acid, whereas addition of EDTA slightly decreases the uptake. An intraparticle diffusion model is successfully used to describe the copper adsorption kinetics.     

贫血患者头发与末稍血中铁,铜含量对比研究

对两组贫血患儿用ＸＲＦ法测定头发及末稍血微量元素铁，铜含量，并与正常值做对比研究，结果显示：发铁高于正常，与血清含量降低相反，与部分研究结论相同。发铜你于正常，与血清结论相同。末销血铁，铜含量均低于正常，与血清铁，铜结论相同。末销血能否作为代表机体铁，铜含量的检验体，值得深入研究证实。     

铜源对溶胶-凝胶法制备La2CuO4晶体及光学性能的影响

以硝酸镧为镧源,柠檬酸为络合剂,水为溶剂,分别以硫酸铜,氯化铜和硝酸铜为铜源,采用溶胶-凝胶法制备了La2CuO4纳米晶。通过热重-示差扫描量热(TG-DSC),X射线衍射(XRD),红外光谱(IR),透射电子显微镜(TEM)和紫外-可见-近红外光谱(UV-Vis-NIR)等方法对La2CuO4粉体进行了测试和表征;研究了不同铜源对前驱体及La2CuO4粉体的热性能、相组成、官能团、显微结构及光学性能的影响。结果表明:以硫酸铜和氯化铜为铜源,600℃煅烧保温2 h,产物均含有杂质相,而以硝酸铜为铜源时,可获得单一的正交晶型的La2CuO4物相,晶粒尺寸80-100 nm。根据UV-Vis-NIR分析,La2CuO4的光学带隙依次为1.193 eV,1.258 eV,1.380 eV。     

Effect of copper compounds on the photo-degradation of polyethylene

In order to elucidate the retardation mechanism of copper compounds in the photo-degradation of polyethylene, the effects of copper stearate, butyrate, acetate and cupric chloride on the photo-degradation of the polymer were examined by infra-red spectra, emission spectra and phosphorescence lifetimes.All copper compounds examined apparently retard the photo-degradation of polyethylene. Polyethylene emits fluorescent light at around 350 nm and phosphorescent light at around 450 nm and the intensities of these emission spectra are strongly decreased by the addition of the copper compounds. The excited triplet lifetimes of the polymer are not affected. In addition, no appreciable difference in photo-degradation was observed between pure polymer samples irradiated through tetrahydrofuran solutions of copper compounds and polymer samples containing the copper compounds irradiated through pure tetrahydrofuran. From the results it is deduced that one of the main retardation functions of the copper compounds is the absorption of ultraviolet light.     

A polarographic study of the redox and complex-forming reactions of penicillamine, N-acetylpenicillamine and copper (I) or (II)

Polarographic methods are used to study the redox and complexation reactions between copper(II) or (I) and penicillamine, N-acetylpenicillamine or the oxidation product, dithiobisvaline. The formation of a 1:1 copper(I) complex between penicillamine and copper(I) was proved, and the stability of the complex measured. Copper(II) oxidizes the sulphur compound to the disulphide and the copper(I) formed then forms a complex with the sulphur amino-acid. The greater stability of the non-acetylated copper(I) complex suggests that RSCu(I) contains a chelate ring with participation of the free amino group. The disulphide can only form a complex with copper(II) and the stability of this complex is low. The results suggest that the copper(I) chelate is the form in which copper is eliminated during treatment with penicillamine.