Solvent extraction of amino acids into a room temperature ionic liquid with dicyclohexano-18-crown-6

Amino acids Trp, Gly, Ala, Leu are extracted efficiently from aqueous solution at pH 1.5–4.0 (Lys and Arg at pH 1.5–5.5) into the room temperature ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate (BmimPF₆) with dicyclohexano-18-crown-6 (CE). The most hydrophilic amino acids such as Gly are extracted as efficiently as the less hydrophilic (92–96%). The influence of pH, amino acid and crown ether concentration, volume ratio of aqueous and organic phases, and presence of some cations on amino acid recovery were studied. The ratio of amino acid to crown ether in the extracted species is 1:1 for cationic Trp, Leu, Ala, and Gly and to 1:2 for dicationic Arg and Lys. This ionic liquid extraction system was used successfully for the recovery of amino acids from pharmaceutical samples and fermentation broth, and was followed by fluorimetric determination.These results were published in part in Smirnova SV (2002) Ph.D. Thesis, Moscow State University.     

Solvent extraction separation of thorium as picrate complex with 18-crown-6

Thorium was quantitatively extracted from 0.04M picric acid with 0.065M of 18-crown-6 at pH 2.0–3.5. It was stripped from organic phase with 0.5M nitric acid and was determined spectrophotometrically at 655 nm as its Arsenazo-III complex. Thorium was separated from mixture containing cerium, uranium, zirconium, hafnium, yttrium and lead in complex mixtures. The method was extended for the analysis of thorium in monazite.     

Solvent extraction of calcium into nitrobenzene by using hydrogen dicarbollylcobaltate in the presence of dicyclohexano-18-crown-6 and dicyclohexano-24-crown-8

Extraction of microamounts of calcium by a nitrobenzene solution of hydrogen dicarbollylcobaltate (H⁺B^?) in the presence of dicyclohexano-18-crown-6 (DCH18C6, L) and dicyclohexano-24-crown-8 (DCH24C8, L) has been investigated. The equilibrium data have been explained assuming that the species HL⁺, $ {\text{HL}}_{2}^{ + },$ CaL²⁺ and $ {\text{CaL}}_{2}^{2 + } $ (L = DCH18C6, DCH24C8) are present in the organic phase. The values of extraction and stability constants of the complex species in nitrobenzene saturated with water have been determined. It was found that the stability constants of CaL²⁺ (L = DCH18C6, DCH24C8) for both ligands under study are practically the same in nitrobenzene saturated with water, whereas in this medium the stability of the complex $ {\text{CaL}}_{2}^{2 + } $ involving the DCH24C8 ligand is somewhat higher than that of $ {\text{CaL}}_{2}^{2 + } $ with the ligand DCH18C6.     

Synergistic extraction of uranyl ion with acylpyrazolones and dicyclohexano-18-crown-6

Synergistic extraction of uranyl ion with acylpyrazolones such as 1-phenyl-3-methyl-4-trifluoroacetylpyrazolone-5 (HPMTFP, pKa=2.7), 1-phenyl-3-methyl-4-acetylpyrazolone (HPMAP, pKa=3.8) or 1-phenyl-3-methyl-4-benzoylpyrazolone-5 (HPMBP, pKa=4.2) in combination with dicyclohexano-18-crown-6 (DC-18-C6) has been studied at various fixed temperatures. The results indicate that the equilibrium constants of the organic phase addition reaction, log Ks, at 30°C are almost constant, viz., 2.72, 2.69 and 2.84, respectively, for the above three systems. The similarity and low log Ks values with DC-18-C6 as compared with TBP systems with these pyrazolones appears to arise due to the limitation to the approach of the large crown ether molecule in bonding with the uranyl chelate. This is in contrast to the fact that the relative basicities of the two donors (equilibrium constant for nitric acid uptake) are comparable. Thermodynamic data for chelate extraction with HPMTFP evaluated by the temperature coefficient method indicates that a hydrated chelate is extracted into the organic phase. Also, the organic phase addition reaction with DC-18-C6 is stabilized by exothermic enthalpy change, the entropy change counteracting in all the three cases.     

Isotope separations of potassium and rubidium in chemical exchange system with dicyclohexano-18-crown-6

Chemical isotope effects of potassium and rubidium were studied bythe liquid-liquid extraction using a crown ether of dicyclohexano-18-crown-6.The isotope enrichment factors for unit mass difference were 0.0062+0.0013for potassium and 0.0018+0.0005 for rubidium. The correlation between theobtained isotope enrichment factors and the atomic weights was discussed withthe applicable values of literatures for the alkali metals.     

Reaction of lead halides with 18-crown-6 and dicyclohexano-18-crown-6: Solvent extraction,synthesis and crystal structure of [Pb(18-crown-6)I2]

Abstract

Solvent extraction of lead halides with 18-crown-6 (18C6), dicyclohexano-18-crown-6 (DC18C6, cis-syn-cis and cis-anti-cis isomers) in chloroform was studied, and the extraction constants corrected for side reactions and ionic strength effects were obtained. The compounds of the same composition as those being extracted were also isolated in crystal form. The molecular structure of the [Pb(18C6)I₂] complex has been determined. Crystals are monoclinic, P2₁/n, a = 11.237(2), b = 10.992(2), c = 8.139(2)Å, β = 97.32(3)°, V = 997.1(7)ų, D_calc = 2.416(2)gcm^?3, Z = 2 for the composition C₁₂H₂₄O₆PbI₂. The final R-factor is 0.043 for 558 unique reflections. The lead atom is coordinated to six oxygen atoms of the crown ether and two iodine atoms forming a hexagonal bipyramidal coordination polyhedron. The 18C6 molecule and the two halogen atoms form a hydrophobic coating for the lead atom which may be assumed to be the main reason of high extraction constants of the iodine complexes. For 10-coordinate lead ion (bidentate counter ions) the cis-syn-cis isomer of DC18C6 appears to be the best extraction reagent, while for 8-coordinate lead ion (monodentate halide anion) no difference between isomers was observed.     

Solvent extraction of uranium(VI) into toluene by dicyclohexano-18-crown-6 from mixed aqueous-organic solutions

Extraction behaviour of uranium(VI) from mixed organo-aqueous solutions containing water-miscible protic aliphatic alcohols and several aprotic solvents was investigated by using dicyclohexano-18-crown-6(DC18C6) as an extractant. The organic phase was a binary solution of DC18C6 and toluene while the polar phase was a three component solution of uranyl nitrate, polar additive and aqueous nitric acid. Methanol, ethanol, isobutanol, dioxane, acetone, propylene carbonate and acetonitrile were used as the organic components of the mixed (polar) phase. Propylene carbonate, acetone, acetonitrile and dioxane increased the extractability of U(VI), whereas alcoholic additives showed only an antagonistic effect. The relative increase in extraction was found to be more at lower nitric acid concentrations. Possible reasons for such behaviour are briefly discussed. Recovery of U(VI) from loaded organic phase was easily accomplished using dilute perchloric acid and sulphuric acid. A sample method was standardized for the separation of plutonium(IV) from uranium(VI) based on its reductive stripping.     

Catalytic activity of diastereomers of dicyclohexano-18-crown-6

Conclusions Dicyclohexano-18-crown-6 diastereomers have a catalytic effect on the reaction of benzyl chloride with potassium acetate. The catalytic activity and extraction capacity of the DCH-18-C-6 diastereomers decrease in the series A > B > C.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 3, pp. 709–710, March, 1986.     

Solvent extraction of microamounts of strontium and barium into nitrobenzene by using synergistic mixture of hydrogen dicarbollylcobaltate and dicyclohexano-18-crown-6

Extraction of microamounts of strontium and barium by a nitrobenzene solution of hydrogen dicarbollylcobaltate (H⁺B^?) in the presence of dicyclohexano-18-crown-6 (DCH18C6, L) has been investigated. The equilibrium data have been explained assuming that the complexes HL⁺, $ {\text{HL}}_{ 2}^{ + } $ , ML²⁺ and $ {\text{ML}}_{ 2}^{ 2+ } $ (M²⁺ = Sr²⁺, Ba²⁺) are extracted into the organic phase. The values of extraction and stability constants of the species in nitrobenzene saturated with water have been determined. It was found that in the mentioned medium the stability constants of the complexes BaL²⁺ and $ {\text{BaL}}_{2}^{2 + }, $ where L = DCH18C6, are somewhat higher than those of the species SrL²⁺ and $ {\text{SrL}}_{2}^{2 + } $ with the same ligand L.     

Extraction of rare-earth elements by alkylated dibenzo-18-crown-6 and dicyclohexano-18-crown-6 from acid solutions

The extraction of rare-earth elements (REE) by alkylated crown ethers (dibenzo-and dicyclohexano-18-crown 6; DB18C6 and DCH18C6) from acid solutions in the chloroform-water system is studied. The extraction of the REE with DCH18C6 and its alkylated derivatives in the presence of trichloroacetic acid (TCA) is far more efficient than the extraction with DB18C6 and its alkylated derivatives or when nitric or acetic acid is used instead of TCA. The distribution coefficients for the cerium metals are far higher than for the yttrium metals. The metal: crown ether ratio in the extracted complex in all cases is 1:1.     

Crystal structure of dicyclohexano-18-crown-6 potassium 2-nitrophenoxide

The first crystal structure of a potassium cation complex with dicyclohexano-18-crown-6 is reported. The potassium 2-nitrophenoxide complex ofsyn-cis-syn dicyclohexano-18-crown-6 crystallizes in the triclinic space group P with cell constantsa=8.604(2),b=10.772(4),C=16.123(5)Å, =73.86(3)°,=77.61(3)°, =82.68(3)° andZ=2 forD _c =1.31 g cm^–3. Least-squares refinement based on 2742 observed reflections led to a final conventionalR value of 0.040. Dicyclohexano-18-crown-6 has the shape of a saddle with the potassium cation sitting at the saddlepoint. The structure of the 2-nitrophenoxide anion is dominanted by the quinoid resonance contributor. Because the complex is devoid of significant intercomplex interactions, it is a prototypical 1:1:1 complex. Supplementary Data relating to this article are deposited with the British Library as Supplementary Publication No. SUP 82043 (26 pages).Now Mrs. K. M. Balo.     

Inclusion compounds ofcis-syn-cis andcis-anti-cis diastereoisomers of dicyclohexano-18-crown-6 with amidosulfuric acid

Both title complexes were prepared by reacting a methanol solution of the respective isomer of dicyclohexano-18-crown-6 (DCH18C6) with an aqueous solution of amidosulfuric acid. Crystals suitable for X-ray crystallography were obtained by recrystallization from methanol.Crystals of [cis-syn-cis-DCH18C6][NH₂SO₂OH·CH₃OH] (1) are monoclinic, space groupP2₁ln,a = 21.700(8),b = 13.725(5),c = 9.118(6) Å, = 76.29(2) Å. Refinement led to a final conventionalR value of 0.065 for 2083 reflections. [Cis-anti -cis-DCH18C6][NH₂SO₂OH] (2) crystallizes in the orthorombic space groupPna2₁ with unit cell dimensionsa = 17.154(7),b = 16.051(7),c =8.630(5) Å. Refinement was terminated at anR value of 0.067 for 1936 reflections.     

Solvent extraction of antimony(III) with 18-crown-6 from iodide media

Antimony can be quantitatively extracted from 1M sulphuric acid containing 0.25M potassium iodide with 0.02M 18-crown-6 in methylene chloride, and determined spectrophotometrically at 430 nm. Bismuth, tin, antimony and arsenic can be separated by sequential extraction with 18-crown-6 from aqueous phases with appropriately adjusted sulphuric acid and potassium iodide concentrations.     

Preconcentration of uranium(VI) by solid phase extraction onto dicyclohexano-18-crown-6 embedded benzophenone

Summary The preparation of a solid phase extractant (SPE), dicyclohexano-18-crown-6 embedded benzophenone, for preconcentration of uranium(VI) is described. The uranium(VI) can be quantitatively retained from 0.5 l solution on 1% dicyclohexano-18-crown-6 embedded benzophenone in the pH range 6.0-7.0, and then eluted with 5.0 ml of 1M HCl. Uranium(VI) content of the eluent was determined spectrophotometrically by Arsenazo III. Calibration graphs are rectilinear over the uranium(VI) concentration in the range of 0.004-0.4mg^.ml^-1. Five replicate determinations of 40mg of uranium(VI) present in 0.5 l sample gave a mean absorbance of 0.185 with a relative standard deviation of 2.45%. The detection limit corresponding to three times the standard deviation of the blank was found to be 2.0mg^.l^-1. The accuracy of the developed preconcentration procedure was tested by analyzing standard marine sediment reference material. The uranyl ion content of soils and sediments was estimated spectrophotometrically after the preconcentration procedure and compared to the results gained by standard inductively coupled plasma mass spectrometry (ICP-MS).     

Solvent extraction separation of gallium with 18crown6 from chloride media

Gallium was quantitatively extracted with 0.02M 18crown6 in methylene chloride from 6M hydrochloric acid, then stripped with 1M acetic acid and determined with 2-(pyridylazo)naphthol with measurement at 545 nm. Gallium was separated from indium, thallium, lead, aluminium and bismuth. The method was applied to determination of gallium in bauxite.     

PVC-based dicyclohexano-18-crown-6 sensor for La(III) ions

A new ion-selective electrode (ISE) based on dicyclohexano-18-crown-6 (DC18C6) as a neutral carrier is developed for lanthanum(III) ions. The electrode comprises of dicyclohexano-18-crown-6 (6%), PVC (33%), and ortho-nitrophenyl octyl ether (o-NPOE) (61%). The electrode shows a linear dynamic response in the concentration range of 10⁻⁶ to 10⁻¹ M with a Nernstian slope of 19 mV per decade and a detection limit as 5×10⁻⁷ M. It has a response time of <30 s and can be used for at least 5 months without any significant divergence in potentials. The selectivity coefficients for mono-, di-, and trivalent cations indicate good selectivity for La(III) ions over a large number of interfering cations. The sensor has been used as an indicator electrode in the potentiometric titrations of La(III) with EDTA. The membrane is successfully applied in partially non-aqueous medium. It can be used in the pH range 4-9.     

A thermodynamic study of the association of alkali metal cations with dicyclohexano-18-crown-6

A thermodynamic study of the association of Na⁺, K⁺, Rb⁺, and Cs⁺ with dicyclohexano-18-crown-6 in acetonitrile has been carried out at 308, 303, 298, 293, and 288 K using a conductometric technique. The observed molar conductivities, A, were found to decrease significantly for mole ratios less than unity. A model involving 11 stoichiometry has been used to analyze the conductivity data. The stability constant,K, and the limiting molar conductivity, A _c , for each 11 complex were determined from the conductivity data by using a nonlinear least squares curve fitting procedure. The binding sequence, based on the value of logK at 298 K, as derived from this study is K⁺>Na⁺>Rb⁺>Cs⁺. Values of H ^o and S ^o are reported and their significance is discussed.     

Enhanced separation of trivalent lanthanoids by solvent extraction with 18-crown-6 and EDTA complexonate

The selectivities during solvent extraction of lanthanoids with macrocycles can be modified with complexonates in the aqueous phase. In the case of solvent extraction of lanthanoids with 18-crown-6 and trichloroacetic acid (TCA), addition of EDTA to the aqueous phase enhances the selectivities of lanthanoids by 3-7 times compared to those without the complexonate. This is due to the fact that the stability of lanthanoid-EDTA complexes increases in the opposite direction to the crown-TCA complexes across the lanthanoid series. The selectivities observed in this system are among the largest reported for the light lanthanoids. The effect of the complexonate on lanthanoid extraction can be explained by a simple model presented in this paper.